Tunable blood oxygenation in the vascular anatomy of a semi-anthropomorphic photoacoustic breast phantom.

SIGNIFICANCE: Recovering accurate oxygenation estimations in the breast with quantitative photoacoustic tomography (QPAT) is not straightforward. Accurate light fluence models are required, but the unknown ground truth of the breast makes it difficult to validate them. Phantoms are often used for the validation, but most reported phantoms have a simple architecture. Fluence models developed in these simplistic objects are not accurate for application on the complex tissues of the breast. AIM: We present a sophisticated breast phantom platform for photoacoustic (PA) and ultrasound (US) imaging in general, and specifically for QPAT. The breast phantom is semi-anthropomorphic in distribution of optical and acoustic properties and contains wall-less channels with blood. APPROACH: 3D printing approaches are used to develop the solid 3D breast phantom from custom polyvinyl chloride plastisol formulations and additives for replicating the tissue optical and acoustic properties. A flow circuit was developed to flush the channels with bovine blood with a controlled oxygen saturation level. To showcase the phantom's functionality, PA measurements were performed on the phantom with two oxygenation levels. Image reconstructions with and without fluence compensation from Monte Carlo simulations were analyzed for the accuracy of oxygen saturation estimations. RESULTS: We present design aspects of the phantom, demonstrate how it is developed, and present its breast-like appearance in PA and US imaging. The oxygen saturations were estimated in two regions of interest with and without using the fluence models. The fluence compensation positively influenced the SO2 estimations in all cases and confirmed that highly accurate fluence models are required to minimize estimation errors. CONCLUSIONS: This phantom allows studies to be performed in PA in carefully controlled laboratory settings to validate approaches to recover both qualitative and quantitative features sought after in in-vivo studies. We believe that testing with phantoms of this complexity can streamline the transition of new PA technologies from the laboratory to studies in the clinic.

Pendant breast immobilization and positioning in photoacoustic tomographic imaging.

This work describes the design, development and added value of breast-supporting cups to immobilize and position the pendant breast in photoacoustic tomographic imaging. We explain the considerations behind the choice of the material, the shape and sizes of a cup-shaped construct for supporting the breast in water in an imaging tank during full-breast imaging. We provide details of the fabrication, and other processing and testing procedures used. Various experiments were conducted to demonstrate the added value of using these cups. We show that breast movement during a measurement time of four minutes is reduced from maximum 2 mm to 0.1 mm by the use of cups. Further, the presence of the cup, centered in the aperture leading to the imaging tank, ensures that the breast can be reproducibly positioned at the center of the field-of-view of the detection aperture in the tank. Finally, since an accurate delineation of the water-tissue boundary can now be made, the use of the cup enables accurate application of a two-speed of sound model for reconstruction. All in all, we demonstrate that the use of cups to support the breast provides clear enhancement in contrast and resolution of breast images in photoacoustic imaging.