RESUMO
This study describes the comparison between the interaction of a series of peptide-functionalized chitosan-based nanocapsules and liposomes with two cell lines, i.e., mouse macrophages RAW 264.7 and human endothelial cells EA.hy926. Both types of nanocarriers are loaded with magnetic nanoparticles and designed for anti-inflammatory therapy. The choice of these magnetic nanostructures is argued based on their advantages in terms of size, morphology, chemical composition, and the multiple possibilities of modifying their surface. Moreover, active targeting might be ensured by using an external magnetic field. To explore the impact of chitosan-based nanocapsules and liposomes on cell cytophysiology, the cell viability, using the MTT assay, and cell morphology were investigated. The results revealed low to moderate cytotoxicity of free nanocapsules and significant cytotoxicity induced by chitosan-coated liposomes loaded with dexamethasone, confirming its release from the delivery system. Thus, after 48 h of treatment with nanocapsules, the viability of RAW 264.7 cells varied between 88.18% (OCNPM-1I, 3.125 µg/mL) and 76.37% (OCNPM-1, 25 µg/mL). In the same conditions, EA.hy926 cell viability was between 99.91% (OCNPM-3, 3.125 µg/mL) and 75.15% (OCNPM-3, 25 µg/mL) at the highest dose (25 µg/mL), the values being comparable for both cell lines. Referring to the cell reactivity after dexamethasone-loaded liposome application, the lowest viability of RAW 264.7 cells was 41.25% (CLDM5CP-1, 25 µg/mL) and 58.20% (CLDMM2CP-1 1.25 µg/mL) in the endothelial cell line, proving a selective character of action of nanocarriers. The cell morphology test, performed to support and confirm the results obtained by the MTT test, revealed a differentiated response for the two types of nano-carriers. As expected, an intense cytotoxic effect in the case of dexamethasone-loaded liposomes and a lack of cytotoxicity for drug-free nanocapsules were noticed. Therefore, our study demonstrated the biocompatible feature of the studied nanocarriers, which highlights them for future research as potential drug delivery systems for pharmacological applications, including anti-inflammatory therapy.
Assuntos
Anti-Inflamatórios , Sobrevivência Celular , Quitosana , Lipossomos , Nanocápsulas , Lipossomos/química , Quitosana/química , Camundongos , Nanocápsulas/química , Animais , Anti-Inflamatórios/farmacologia , Anti-Inflamatórios/química , Anti-Inflamatórios/administração & dosagem , Humanos , Células RAW 264.7 , Sobrevivência Celular/efeitos dos fármacos , Dexametasona/farmacologia , Dexametasona/química , Dexametasona/administração & dosagem , Linhagem Celular , Nanopartículas de Magnetita/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologiaRESUMO
Adding carbonyl groups into the hydrogel matrix improves the stability and biocompatibility of the hydrogels, making them suitable for different biomedical applications. In this review article, we will discuss the use of hydrogels based on polysaccharides modified by oxidation, with particular attention paid to the introduction of carbonyl groups. These hydrogels have been developed for several applications in tissue engineering, drug delivery, and wound healing. The review article discusses the mechanism by which oxidized polysaccharides can introduce carbonyl groups, leading to the development of hydrogels through cross-linking with proteins. These hydrogels have tunable mechanical properties and improved biocompatibility. Hydrogels have dynamic properties that make them promising biomaterials for various biomedical applications. This paper comprehensively analyzes hydrogels based on cross-linked proteins with carbonyl groups derived from oxidized polysaccharides, including microparticles, nanoparticles, and films. The applications of these hydrogels in tissue engineering, drug delivery, and wound healing are also discussed.
Assuntos
Materiais Biocompatíveis , Sistemas de Liberação de Medicamentos , Hidrogéis , Polissacarídeos , Proteínas , Engenharia Tecidual , Cicatrização , Hidrogéis/química , Polissacarídeos/química , Humanos , Materiais Biocompatíveis/química , Engenharia Tecidual/métodos , Cicatrização/efeitos dos fármacos , Proteínas/química , Animais , Reagentes de Ligações Cruzadas/química , OxirreduçãoRESUMO
Bovine serum albumin (BSA) hydrogels are non-immunogenic, low-cost, biocompatible, and biodegradable. In order to avoid toxic cross-linking agents, gellan was oxidized with NaIO4 to obtain new functional groups like dialdehydes for protein-based hydrogel cross-linking. The formed dialdehyde groups were highlighted with FT-IR and NMR spectroscopy. This paper aims to investigate hydrogel films for biomedical applications obtained by cross-linking BSA with oxidized gellan (OxG) containing immobilized ß-cyclodextrin-curcumin inclusion complex (ß-CD-Curc) The ß-CD-Curc improved the bioavailability and solubility of Curc and was prepared at a molar ratio of 2:1. The film's structure and morphology were evaluated using FT-IR spectroscopy and SEM. The swelling degree (Q%) values of hydrogel films depend on hydrophilicity and pH, with higher values at pH = 7.4. Additionally, the conversion index of -NH2 groups into Schiff bases increases with an increase in OxG amount. The polymeric matrix provides protection for Curc, is non-cytotoxic, and enhances antioxidant activity. At pH = 5.5, the skin permeability and release efficiency of encapsulated curcumin were higher than at pH = 7.4 because of the interaction of free aldehyde and carboxylic groups from hydrogels with amine groups from proteins present in the skin membrane, resulting in a better film adhesion and more efficient curcumin release.
RESUMO
Lung infections, such as: pneumonia, chronic obstructive cystic fibrosis, tuberculosis are generally caused by viruses, bacteria and fungi. As these infections are very difficult to treat, new therapeutic approaches are investigated in order to maximize the efficiency of the treatment and to reduce the major complications that can occur. The main objective of this study was focused on the preparation of drug-loaded peptides-functionalized microcapsules, obtained by a double emulsion, based on carboxylated chitosan (CMCS), poly(vinyl alcohol) (PVA) and an activator [4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride] (DMT-MM), for the dual active targeting and treatment of pulmonary infections. The microcapsules were functionalized on the surface with both CGSPGWVRC and indolicidin (IN) peptides, as effective ligands for the active targeting of both alveolar capillary endothelial cells and bacterial cells. FTIR spectroscopy confirmed the formation of ester and amide bonds into the structure of prepared microcapsules. Microcapsules diameter varied between 893 and 965 nm. The swelling degree in PBS, at pH 7.4, ranged between 1760 %- 2100 %. All the analyzed samples showed hemolysis degrees lower than 2 %, which demonstrated their non-hemolytic character. Evaluation of the impact of microcapsules on WI-38 normal human lung cells and RAW 264.7 mouse macrophages revealed a non-toxic or slightly cytotoxic effect. Internalization assay proved that microcapsules were localized at intracellular level.
Assuntos
Quitosana , Pneumonia , Animais , Camundongos , Humanos , Quitosana/química , Cápsulas/química , Células Endoteliais , Peptídeos , PulmãoRESUMO
Nanotechnology is the science of creating materials at the nanoscale by using various devices, structures, and systems that are often inspired by nature. Micro- and nanoparticles (MPs, NPs) are examples of such materials that have unique properties and can be used as carriers for delivering drugs for different biomedical applications. Chitosan (CS) is a natural polysaccharide that has been widely studied, but it has a problem with low water solubility at neutral or basic pH, which limits its processability. The goal of this work was to use a chemically modified CS with poly(ethylene glycol) methyl ether acrylate (PEGA) to prepare CS micronic and submicronic particles (MPs/NPs) that can deliver different types of antibiotics, respectively, levofloxacin (LEV) and Ciprofloxacin (CIP). The particle preparation procedure employed a double crosslinking method, ionic followed by a covalent, in a water/oil emulsion. The studied process parameters were the precursor concentration, stirring speeds, and amount of ionic crosslinking agent. MPs/NPs were characterized by FT-IR, SEM, light scattering granulometry, and Zeta potential. MPs/NPs were also tested for their water uptake capacity in acidic and neutral pH conditions, and the results showed that they had a pH-dependent behavior. The MPs/NPs were then used to encapsulate two separate drugs, LEV and CIP, and they showed excellent drug loading and release capacity. The MPs/NPs were also found to be safe for cells and blood, which demonstrated their potential as suitable drug delivery systems for biomedical applications.
RESUMO
Glioblastoma multiforme (GBM) is a highly aggressive malignant tumor, and the most prevalent primary malignant tumor affecting the brain and central nervous system. Recent research indicates that the genetic profile of GBM makes it resistant to drugs and radiation. However, the main obstacle in treating GBM is transporting drugs through the blood-brain barrier (BBB). Albumin is a versatile biomaterial for the synthesis of nanoparticles. The efficiency of albumin-based delivery systems is determined by their ability to improve tumor targeting and accumulation. In this review, we will discuss the prevalence of human glioblastoma and the currently adopted treatment, as well as the structure and some essential functions of the BBB, to transport drugs through this barrier. We will also mention some aspects related to the blood-tumor brain barrier (BTBB) that lead to poor treatment efficacy. The properties and structure of serum albumin were highlighted, such as its role in targeting brain tumors, as well as the progress made until now regarding the techniques for obtaining albumin nanoparticles and their functionalization, in order to overcome the BBB and treat cancer, especially human glioblastoma. The albumin drug delivery nanosystems mentioned in this paper have improved properties and can overcome the BBB to target brain tumors.
RESUMO
Amylase is an enzyme used to hydrolyze starch in order to obtain different products that are mainly used in the food industry. The results reported in this article refer to the immobilization of α-amylase in gellan hydrogel particles ionically cross-linked with Mg2+ ions. The obtained hydrogel particles were characterized physicochemically and morphologically. Their enzymatic activity was tested using starch as a substrate in several hydrolytic cycles. The results showed that the properties of the particles are influenced by the degree of cross-linking and the amount of immobilized α-amylase enzyme. The temperature and pH at which the immobilized enzyme activity is maximum were T = 60 °C and pH = 5.6. The enzymatic activity and affinity of the enzyme to the substrate depend on the particle type, and this decreases for particles with a higher cross-linking degree owing to the slow diffusion of the enzyme molecules inside the polymer's network. By immobilization, α-amylase is protected from environmental factors, and the obtained particles can be quickly recovered from the hydrolysis medium, thus being able to be reused in repeated hydrolytic cycles (at least 11 cycles) without a substantial decrease in enzymatic activity. Moreover, α-amylase immobilized in gellan particles can be reactivated via treatment with a more acidic medium.
Assuntos
Hidrogéis , alfa-Amilases Pancreáticas , Suínos , Estabilidade Enzimática , Enzimas Imobilizadas/química , alfa-Amilases/metabolismo , Temperatura , Íons , Amido , Concentração de Íons de Hidrogênio , AnimaisRESUMO
Polymeric microcapsules are extensively investigated as drug delivery systems for a broad range of applications. In the present study, Dexamethasone-loaded carboxylated chitosan (CCS)/poly (vinyl alcohol) (PVA)-based microcapsules were prepared in view of their potential administration by inhalation for the treatment of lung diseases. The crosslinking between PVA and CCS was activated by [4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride] (DMT-MM) and the FTIR results proved the formation of ester bonds between the two polymers. The sizes of the obtained microcapsules are influenced by the ratio between the polymers but also by the concentration of the DMT-MM activator. Moreover, the amount of PVA in the system has an important influence on swelling degree, encapsulation efficiency, drug release degree, biodegradation and protein adsorption. The sample with the highest amount of PVA has the highest crosslinking density and thus the lowest swelling degree and encapsulation efficiency. However, an encapsulation degree of 61.3% was obtained for the sample MCP-6 with the lowest PVA content. The same sample showed the lowest BSA adsorption. A controlled and sustained Dexamethasone release of around 90% was observed in PBS at pH 7.4 and 37 °C during 24 h. All the obtained samples were hemocompatibles and thus can be used as efficient drug delivery systems.
Assuntos
Quitosana , Polímeros , Cápsulas , Emulsões , Polímeros/química , Álcool de Polivinil/química , Dexametasona , Quitosana/químicaRESUMO
Semi-interpenetrating polymer networks (semi-IPN) represent a type of polymeric material that has gained increasing amount of interest for their potential biomedical application. This study presents the synthesis, characterization and tetracycline loading/release capacities of semi-IPNs based on hydroxyethyl methacrylate (HEMA) and poly(4-vinylpyridine) (P4VP) or poly (1-vinyl-4-(1-carboxymethyl) pyridinium betaine) (P4VPB-1) and poly (1-vinyl-4-(2-carboxyethyl) pyridinium betaine) (P4VPB-2). The optimization of the semi-IPNs synthesis was achieved by studying the influence of reaction parameters (chemical structure of the cross-linking agent, HEMA:crosslinker ratio, HEMA:linear polymers ratio and the type of solvent of the linear polymers) on the yield of obtaining semi-IPNs and swelling capacity of these systems. Fourier-transform infrared analysis and scanning electron microscopy highlighted the chemical structures and morphologies of the semi-IPNs. The higher swelling capacity was observed in the case of the PHEMA/P4VPB-2 network due to the increased hydrophilicity of P4VPB-2 compared with P4VP and P4VPB-1 polymers. In vitro release studies of tetracycline reveal that the release mechanism is represented by non-Fickian diffusion being controlled by both diffusion and swelling processes. The antimicrobial activity of semi-IPN-tetracycline systems was tested against E. coli and S. aureus, demonstrating that tetracycline is released from the semi-IPN and retains its bactericidal activity. An increased value of the inhibition zone diameter compared with that of tetracycline indicates the possibility that the semi-IPN containing P4VPB-2 also exhibits intrinsic antimicrobial activity due to the presence of the polybetaine in the network structure.
RESUMO
Nowadays, the Magnetically Targeted Drug Delivery System (MTDDS) is among the most attractive and promising strategies for delivering drugs to the target site. The present study aimed to obtain a biopolymer-magnetite-drug nanosystem via a double crosslinking (ionic and covalent) technique in reverse emulsion, which ensures the mechanical stability of the polymer support in the form of original hybrid nanospheres (NSMs) loaded with biologically active principles (the 5-Fluorouracil (5-FU)) as a potential treatment for cancer. Obtained NSMs were characterized in terms of structure (FT-IR), size (DLS), morphology (SEM), swelling, and 5-FU entrapment/release properties, which were dependent on the synthesis parameters (polymer concentration, dispersion speed, and amount of ionic crosslinking agent). SEM analysis results revealed that NSMs presented a spherical shape and are homogeneous and separated. Moreover, NSMs' ability to load/release 5-FU was tested in vitro, the results confirming, as expected, their dependence on the varied synthesis process and NSM swelling ability in physiological liquids. The drug transport mechanism through the polymer matrix of its release is the Fickian type. The morphological, bio-material characteristics and the ability to include and release an antitumor drug highlight the utility of the NSMs obtained for targeting and treating some tumor diseases.
RESUMO
In this work, photoluminescent (PL) carbon nano dots (CNDs) prepared from argan waste were embedded in highly optical transparent poly(styrene-co-acrylonitrile) (PSA) and cyclo-olefin copolymer (COC) matrices, which were further processed into thin films. In the first step, the luminescent CNDs were prepared through thermal processing of fine-groundargan waste, followed, in the second step, by direct dispersion in the polymer solutions, obtained by solving PSA and COC in selected solvents. These two polymer matrices were selected due to their high optical transparency, resilience to various environmental factors, and ability to be processed as quality thin films. The structural configuration of the CNDs was investigated through EDX, XPS, and FTIR, while DLS, HR-SEM, and STEM were used for their morphology investigation. The luminescence of the prepared CNDs and resulted polymer nanocomposites was thoroughly investigated through steady-state, absolute PLQY, and lifetime fluorescence. The quality of the resulted CND-polymer nanocomposite thin films was evaluated through AFM. The prepared highly luminescent thin films with a PL conversion efficiency of 30% are intended to be applied as outer photonic conversion layers on solar PV cells for increasing their conversion efficiency through valorization of the UV component of the solar radiation.
RESUMO
The main objective of this work was the removal of eosin Y and green malachite from an aqueous medium by using a cellulose-based biodegradable interpenetrated network (IPN). The IPN was obtained by the sequenced synthesis method. In the first step, cellulose was crosslinked with epichlorohydrin (ECH). In the second step, the obtained gels were swollen in a reactive mixture solution, which was based on the monomers 2-hydroxyethyl methacrylate (HEMA) and 1,6- hexanediol diacrylate (HDDA). After this, swelling equilibrium was reached through the gels' exposition to UV radiation. An infrared spectroscopy (FTIR) was used to analyze the bond stretching, which confirmed the IPN's formation. The swelling kinetics in aqueous mediums with different pH values showed a high swelling at a basic pH value and a low response in neutral and acidic media. The IPNs showed an improvement in water uptake, compared to the networks based on PHEMA or cellulose. The IPN was used to remove dyes from the water. The results showed that a high percentage of green malachite was removed by the IPN in six minutes of contact time. The experimental results were confirmed by the docking/modeling method of the system (IPN/Dye). The different physical interactions between the IPN and the dyes' molecules were investigated. The interactions of the hydrogen bonds with malachite green were stronger than those with eosin Y, which was in good agreement with the experimental results.
RESUMO
In this work, three new polymer aerogels based on 2-hydroxy ethyl methacrylate (HEMA) complexes with Eu(III), Tb(III) and La(III) are prepared and investigated. The polymer aerogels present strong photoluminescence with emissions located in the red, green and blue regions of the visible spectrum. Depending on the water content used during the preparation path, the consistency of the photoluminescent aerogels varies from rigid, regularly shaped monoliths to a flexible, fibrous material with very low density. The morpho-structural investigation was performed by FT-IR, XPS and SEM. Thermal behavior was also evaluated, while steady-state fluorescence spectroscopy, absolute PLQY and lifetime were used for the investigation of their luminescent properties. The impressive photoluminescent emission located in the red, green and blue areas of the visible spectrum is preserved irrespective of the selected porosity. Their photo-emissive properties, tunable porosity and the convenience of the preparation path could be some arguments for applications as photonic conversion mediums in special-purpose optoelectronic devices or sensors.
Assuntos
Polímeros , Água , Polímeros/química , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Three types of precursor microparticles based on glycidyl methacrylate, hydroxyethyl methacrylate and one of the following three crosslinking agents (mono-, di- or triethylene glycol dimethacrylate) were prepared using the suspension polymerization technique. The precursor microparticles were subsequently used to obtain three types of hybrid microparticles. Their synthesis took place by grafting sodium hyaluronate, in a basic medium, to the epoxy groups located on the surface of the precursor microparticles. Both types of the microparticles were characterized by: FTIR spectroscopy, epoxy groups content, thermogravimetric analysis, dimensional analysis, grafting degree of sodium hyaluronate, SEM and AFM analyses, and specific parameters of porous structures (specific surface area, pore volume, porosity). The results showed that the hybrid microparticles present higher specific surface areas, higher swelling capacities as well as higher adsorption capacities of antimicrobial drugs (metronidazole). To examine the interactions between metronidazole and the precursor/hybrid microparticles the adsorption equilibrium, kinetic and thermodynamic studies were carried out. Thus, it was determined the performance of the polymer systems in order to select a polymer-drug system with a high efficiency. The release kinetics reflect that the release mechanism of metronidazole in the case of hybrid microparticles is a complex mechanism characteristic of anomalous or non-Fickian diffusion.
RESUMO
The physicochemical properties of "smart" or stimuli-sensitive amphiphilic copolymers can be modeled as a function of their environment. In special, pH-sensitive copolymers have practical applications in the biomedical field as drug delivery systems. Interactions between the structural units of any polymer-drug system imply mutual constraints at various scale resolutions and the nonlinearity is accepted as one of the most fundamental properties. The release kinetics, as a function of pH, of a model active principle, i.e., Curcumin, from nanomicelles obtained from amphiphilic pH-sensitive poly(2-vinylpyridine)-b-poly(ethylene oxide) (P2VP-b-PEO) tailor-made diblock copolymers was firstly studied by using the Rietger-Peppas equation. The value of the exponential coefficient, n, is around 0.5, generally suggesting a diffusion process, slightly disturbed in some cases. Moreover, the evaluation of the polymer-drug system's nonstationary dynamics was caried out through harmonic mapping from the usual space to the hyperbolic one. The kinetic model we developed, based on fractal theory, fits very well with the experimental data obtained for the release of Curcumin from the amphiphilic copolymer micelles in which it was encapsulated. This model is a variant of the classical kinetic models based on the formal kinetics of the process.
Assuntos
Curcumina , Fractais , Micelas , Polietilenoglicóis/química , Polímeros/químicaRESUMO
Glaucoma is the second leading cause of blindness in the world. Despite the fact that many treatments are currently available for eye diseases, the key issue that arises is the administration of drugs for long periods of time and the increased risk of inflammation, but also the high cost of eye surgery. Consequently, numerous daily administrations are required, which reduce patient compliance, and even in these conditions, the treatment of eye disease is too ineffective. Micellar polymers are core-shell nanoparticles formed by the self-assembly of block or graft copolymers in selective solvents. In the present study, polymeric micelles (PMs) were obtained by dialysis from smart biocompatible poly(ε-caprolactone)-poly(N-vinylcaprolactam-co-N-vinylpyrrolidone) [PCL-g-P(NVCL-co-NVP)] graft copolymers. Two copolymers with different molar masses were studied, and a good correlation was noted between the micellar sizes and the total degree of polymerisation (DPn) of the copolymers. The micelles formed by Cop A [PCL120-g-P(NVCL507-co-NVP128)], with the lowest total DPn, have a Z-average value of 39 nm, whereas the micellar sizes for Cop B [PCL120-g-P(NVCL1253-co-NVP139)] are around 47 nm. These PMs were further used for the encapsulation of two drugs with applications for the treatment of eye diseases. After the encapsulation of Dorzolamide, a slight increase in micellar sizes was noted, whereas the encapsulation of Indomethacin led to a decrease in these sizes. Using dynamic light scattering, it was proved that both free and drug-loaded PMs are stable for 30 days of storage at 4 °C. Moreover, in vitro biological tests demonstrated that the obtained PMs are both haemo- and cytocompatible and thus can be used for further in vivo tests. The designed micellar system proved its ability to release the encapsulated drugs in vitro, and the results obtained were validated by in vivo tests carried out on experimental animals, which proved its high effectiveness in reducing intraocular pressure.
Assuntos
Glaucoma , Micelas , Animais , Portadores de Fármacos , Glaucoma/tratamento farmacológico , Poliésteres , Polietilenoglicóis , Polímeros , Diálise RenalRESUMO
Chitosan (CS) crosslinking has been thoroughly investigated, but the chemical reactions leading to submicronic hydrogel formulations pose problems due to various physical/chemical interactions that limit chitosan processability. The current study employs the chemical modification of chitosan by Michael addition of poly (ethylene glycol) methyl ether acrylate (PEGA) to the amine groups to further prepare chitosan particulate hydrogels (CPH). Thus, modified CS is subjected to a double crosslinking, ionic and covalent, in water/oil emulsion. The studied process parameters are polymer concentration, stirring speed, and quantity of ionic crosslinker. The CPH were structurally and morphologically characterized through infrared spectroscopy, scanning electron microscopy, light scattering granulometry, and zeta potential, showing that modified CS allows better control of dimensional properties and morphology as compared with neat CS. Swelling properties were studied in acidic and neutral pH conditions, showing that pH-dependent behavior was maintained after grafting and double crosslinking. The applicability of the prepared materials was further tested for drug loading and in vitro delivery of levofloxacin (LEV), showing excellent capacity. CPH were found to be cyto- and hemocompatible demonstrating their potential for effective use as a controlled release system for different biomedical applications.
RESUMO
Bacterial oral diseases are chronic, and, therefore, require appropriate treatment, which involves various forms of administration and dosing of the drug. However, multimicrobial resistance is an increasing issue, which affects the global health system. In the present study, a commercial amphiphilic copolymer, Pluronic F127, was used for the encapsulation of 1-(5'-nitrobenzimidazole-2'-yl-sulphonyl-acetyl)-4-aryl-thiosemicarbazide, which is an original active pharmaceutical ingredient (API) previously synthesized and characterized by our group, at different copolymer/API weight ratios. The obtained micellar systems, with sizes around 20 nm, were stable during 30 days of storage at 4 °C, without a major increase of the Z-average sizes. As expected, the drug encapsulation and loading efficiencies varied with the copolymer/API ratio, the highest values of 84.8 and 11.1%, respectively being determined for the F127/API = 10/1 ratio. Moreover, in vitro biological tests have demonstrated that the obtained polymeric micelles (PMs) are both hemocompatible and cytocompatible. Furthermore, enhanced inhibition zones of 36 and 20 mm were observed for the sample F127/API = 2/1 against S. aureus and E. coli, respectively. Based on these encouraging results, it can be admitted that these micellar systems can be an efficient alternative for the treatment of bacterial oral diseases, being suitable either by injection or by a topical administration.
RESUMO
Drug delivery is an important field of nanomedicine, and its aim is to deliver specific active substances to a precise site of action in order to produce a desired pharmacological effect. In the present study nanocapsules were obtained by a process of interfacial condensation between chitosan (dissolved in the aqueous phase) and poly(N-vinyl pyrrolidone-alt-itaconic anhydride), a highly reactive copolymer capable of easily opening the anhydride ring under the action of amine groups of chitosan. The formed amide bonds led to the formation of a hydrogel membrane. The morphology of the obtained nanocapsules, their behavior in aqueous solution of physiological pH, and their ability to encapsulate and release a model drug can be modulated by the parameters of the synthesis process, such as the molar ratio between functional groups of polymers and the ratio of the phases in which the polymers are solubilized. Although a priori both polymers are biocompatible, this paper reports the results of a very detailed in vivo study conducted on experimental animals which have received the obtained nanocapsules by three administration routes-intraperitoneal, subcutaneous, and oral. The organs taken from the animals' kidney, liver, spleen, and lung and analyzed histologically demonstrated the ability of nanocapsules to stimulate the monocytic macrophage system without producing inflammatory changes. Moreover, their in vivo behavior has been shown to depend not only on the route of administration but also on the interaction with the cells of the organs with which they come into contact. The results clearly argue the biocompatibility of nanocapsules and hence the possibility of their safe use in biomedical applications.
RESUMO
Even though numerous studies on the systemic administration of antimicrobial drugs can be found in the literature, they still have many shortcomings related to the site-specific drug delivery, unwanted side effects and even potential toxicity [...].