First mesomorphic and DFT characterizations for 3- (or 4-) n-alkanoyloxy benzoic acids and their optical applications.

New liquid crystalline hydrogen bonded 3- (or 4)-n-alkanoyloxy benzoic acids were synthesized and probed theoretically and experimentally. The molecular structures of these compounds were elucidated by proton NMR, carbon-13 NMR and elemental analyses. Differential scanning calorimetry (DSC) was used to investigate the thermal and mesomorphic properties of all the symmetrical dimers that bearing identical alkanoyloxy chains. Moreover, polarized optical microscopy (POM) was used to determine their mesophases. The findings show that all the designed symmetrical dimers exhibit the smectic mesophase with relative thermal stability that depends on the length of their terminal side chain. Additionally, the experimental findings of the mesomorphic behavior are further supported by DFT calculations. The alkanoyloxy benzoic acid para-derivatives (In) were shown to be more stable than their meta-substituted (IIn) analogues due to stronger hydrogen bonding interactions. The computed reactivity parameters showed that the position of ester moiety has a significant impact on the acids reactivity. The absorbance spectra of both the 3- (or 4)-n-alkanoyloxy benzoic acids revealed a blue shift with the increment of the of alkyl chain size; however, the energy band gaps of 3-n-alkanoyloxy benzoic derivatives were found to be slightly higher than those of the 4-n-alkanoyloxy benzoic acids. Moreover, the photoluminescence spectrum of the prepared materials is rather broad, and exhibited a red shift as the alkyl chain length increases. The fluorescence lifetime shown to rise as alkyl chain length grows longer, and 3-n-alkanoyloxy benzoic acids have slightly longer lifetime compared to their 4-n-alkanoyloxy benzoic analogues.

Enhancement Properties of Zr Modified Porous Clay Heterostructures for Adsorption of Basic-Blue 41 Dye: Equilibrium, Regeneration, and Single Batch Design Adsorber.

Zirconium porous clay heterostructures (Zr-PCH) were synthesized using intercalated clay minerals by zirconium species with different contents of zirconium. The presence of zirconium and silica species was confirmed by X-ray diffraction, X-ray fluorescence, and magic-angle spinning nuclear magnetic resonance. The insertion of zirconium improved the thermal stability, the specific surface area with a maximum of 950 m2/g, and the acidity concentration of 0.993 mol of protons per g of solid. These materials were used to adsorb the basic blue-41 from aqueous solution. The adsorption efficiency was examined at different conditions, with a maximum adsorbed amount of 346 mg/g as estimated from Langmuir model. This value was dependent on zirconium content in the PCHs. The adsorption process was found to be favorable and spontaneous. The efficiency of the spent materials was maintained after five reuse cycles with a decrease by 15% of the original value for a particular Zr-PCH material with a Zr content of 6.82%. Single stage batch adsorber was suggested using the mass balance equation and Langmuir isotherm model. The amount of PCH materials required depended on the target percentage of adsorption at specific volume and initial concentration of the basic-blue-41 dye solution.

Novel Imidazole Liquid Crystals; Experimental and Computational Approaches.

The liquid crystalline materials named (E)-4-(2-(4-oxo-5,5-diphenyl-4,5-dihydro-1H-imidazol-2-yl)hydrazineylidene)methyl)phenyl and 4-(alkoxy)benzoate, In, were synthesized and their mesomorphic behaviors were examined. The chemical structures of the produced compounds were confirmed by Fourier-transform infrared spectroscopy (FT-IR), NMR, and elemental analysis. Differential scanning calorimetry (DSC) and polarized optical microscopy were used to investigate the mesomorphic properties of designed heterocyclic derivatives. All the compounds tested had suitable thermal stability and enantiotropic behavior of smectogenic temperature ranges. Furthermore, the enantiotropic smectic C phases were observed to cover all the homologues. Moreover, computational investigations corroborated the experimental findings of the mesomorphic behavior. The reactivity parameters were computed for the derivatives and linked with the experimental data. Theoretical calculations revealed that the polarizability of the studied series increases with the chain length, whereas the HOMO-LUMO energy gap or other reactivity descriptors were less sensitive to the size of the system. On the other hand, the predicted thermodynamic parameters revealed the size dependence of thermal stability of the compounds.

Experimental and Theoretical Investigations of Three-Ring Ester/Azomethine Materials.

New three-ring ester/azomethine homologues series, (E)-4-((4-hydroxybenzylidene)amino)phenyl 4-(alkoxy)benzoate In, were prepared and their properties were investigated experimentally and theoretically. FT-IR, NMR, and elemental analyses were used to confirm the chemical structures of the synthesized compounds. The mesomorphic activities of the planned homologues were evaluated using differential scanning calorimetry (DSC) and polarized optical microscopy. All of the homologous examined were found to have non-mesomorphic properties. Theoretical calculations using the density functional theory (DFT) were used to validate the experimental data and determine the most stable conformation of the synthesized compounds. All calculated conformers' thermal properties, dipole moments, and polarizability were discussed. The results show that the terminal alkoxy chain length affects the thermal parameters of the conformers. The correlations between these parameters' values and the conformer type were demonstrated. The base component was expected to be in two conformers according to the orientation of the N atom of imine-linkage. DFT calculations revealed the more probable of the two possible conformers, and the incorporation of the alkoxy terminal chain in one position affect its geometrical and mesomerphic characteristics.

A novel cyclic dinuclear gold(I) complex induces anticancer activity via an oxidative stress-mediated intrinsic apoptotic pathway in MDA-MB-231 cancer cells.

A new dinuclear cyclic gold(I) complex [Au2(DCyPA)2](PF6)2, 1, based on bis[2-(dicyclohexylphosphano)ethyl]amine (DCyPA) has been synthesized and characterized by elemental analysis, IR and NMR spectroscopy, and X-ray crystallography. In the dinuclear complex cation [Au2(DCyPA)2]2+, the two gold(I) ions are bridged by the ligand bis[2-(dicyclohexylphosphano)ethyl]amine (DCyPA) giving rise to a 16-membered ring centrosymmetric metallacycle. The cytotoxicity of the complex was evaluated against the triple-negative human breast cancer cells MDA-MB-231. In order to understand the mechanism of the cytotoxic behavior, a variety of assays, including Annexin V-FITC/Propidium iodide double staining, ROS production, and mitochondrial membrane potential and migration assays were carried out. The results indicated that complex 1 induced cytotoxicity via an oxidative stress-mediated intrinsic apoptotic pathway in MDA-MB-231 cancer cells.

Synthesis, Phase Behavior and Computational Simulations of a Pyridyl-Based Liquid Crystal System.

A homologous set of liquid crystalline materials (Tn) bearing Schiff base/ester linkages were prepared and investigated via experimental and theoretical techniques. Terminal flexible groups of different chain lengths were connected to the end of phenylbenzoate unit while the other end of molecules was attached to the heterocyclic pyridine moiety. The molecular structures of the designed molecules were evaluated by FT-IR, NMR spectroscopic analyses, whereas their mesomorphic properties were investigated by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). They all exhibited dimorphic properties with the exception of the members having the shortest and longest terminal flexible chains (n = 6 and 16), which were monomorphic. The T16 derivative was further found possessing purely smectic A (SmA) mesophase while others have their lengths covered by nematic (N) phase. Moreover, the computational evaluation of the azomethine derivatives was carried out using a DFT approach. The polarity of the investigated derivatives was predicted to be appreciably sensitive to the size of the system. Furthermore, the Frontier molecular orbitals analysis revealed various distributions of electron clouds at HOMO and LUMO levels.

Al and Zr Porous Clay Heterostructures as Removal Agents of Basic Blue-41 Dye from an Artificially Polluted Solution: Regeneration Properties and Batch Design.

The removal of Basic Blue-41 dye molecules was carried out by using two doped porous clay heterostructures by aluminum (Al) or zirconium (Zr) species. The proposed method of synthesis showed its efficiency, starting from Al or Zr intercalated hydrolyzed species, prior to its reaction with dodecylamine (C12 amine) and tetraethyl orthosilicate (TEOS) as a silica source. The intercalated precursors and their porous clay heterostructures (PCH) derivatives were characterized by different techniques. Solid NMR technique proved the presence of Al species into the intercalated silica between the clay sheets, and in addition to Si in different environments within the PCH materials. The Zr-PCH material exhibited a higher surface area and pore volume compared to its Al-PCH counterpart, with a mesoporous character for both materials. A maximum removed amount of 279 and 332 mg/g was achieved and deduced from the Langmuir equation. The regeneration tests revealed that the removal efficiency of Zr-PCH was retained after five regeneration runs, with a loss of 15% of the original value; meanwhile, the Al-PCH lost 45% of its efficiency after only three cycles. A single-stage batch design was proposed based on the Langmuir isotherm parameters. The increase of the removal capacity of Zr-PCH led to the reduction of the required amounts for the target removal of BB-41 dye compared to Al-PCH.

Novel sulphonic acid liquid crystal derivatives: experimental, computational and optoelectrical characterizations.

A novel liquid crystal homologous series based on the benzene sulphonic acid moiety, namely (E)-4-((4-((4-(alkoxy)benzoyl)oxy)benzylidene)amino)benzenesulfonic acid (Sn), was synthesized and examined via different experimental and theoretical measurements. The four synthesized members have terminally connected alkoxy chain groups, which vary between 6 and 12 carbons. FT-IR and NMR spectroscopy, as well as elemental analyses, were used to confirm their molecular structures. Mesomorphic and optical investigations of the prepared homologues were also conducted using differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The DSC and POM characterization revealed that all of the synthesized sulphonic acid members are monomorphic, exhibiting a pure smectic A (SmA) mesophase with enantiotropic properties. Moreover, all compounds in the group have high thermal transition temperatures. The terminal electron-withdrawing group -SO3H plays a considerable role in the stabilization of the molecule, which in return resulted in high thermal SmA stability. Furthermore, the experimental data relating to the mesophase behavior were substantiated via computational studies using the DFT approach. In addition, the terminal -SO3H moiety has an essential impact on the thermal and physical parameters of possible geometries. All members of the synthesized Sn series exhibit ohmic behavior with electrical resistance in the GΩ range, as revealed by electrical measurements. The S10 electrode had the highest electrical conductivity: 35.16 pS. It also showed two direct optical band gaps of 3.58 and 3.23 eV with Urbach energies of 1261.1 and 502.4 meV. Upon decreasing the number of carbon atoms to n = 6, the main bandgap for S6 reduced to 3.3 eV. The highest conductivity, good absorption, and two large bandgaps recorded for the chain derivative S10 make it suitable for investigations relating to energy-based applications.

Spectral characterization, thermochemical studies, periodic SAPT calculations and detailed quantum mechanical profiling various physico-chemical properties of 3,4-dichlorodiuron.

A set of experimental and computational techniques have been applied for the understanding of fundamental spectroscopic and reactive properties of 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron) compound. Experimental techniques employed in this study encompassed spectroscopic characterization via IR and Raman approaches, while optical properties were studied by measurements of UV/Vis spectra. The thermogravimetric analysis was also studied in order to analyze the stability of diuron. Aside from the determination of reactive properties, DFT calculations on isolated molecules were also used to thoroughly visualize and analyze spectroscopic properties such as IR and UV/Vis. MD simulations were used in order to understand interactions with water, while periodic DFT calculations were used in order to analyze band structure and density of states of the diuron crystal structure. Since the crystal structure of diuron is known, it was used in order to extract the relevant molecular pairs and investigate interactions between them by DFT and symmetry adapted perturbation theory approaches (SAPT).

Silver-loaded graphene as an effective SERS substrate for clotrimazole detection: DFT and spectroscopic studies.

Vibrational infrared, Raman and surface-enhanced Raman scattering (SERS) spectra of clotrimazole (CTZ) were documented and evaluated. Density-functional theory, B3LYP/6-311++G(d,p), approach was implemented to identify the possible conformations, develop the electrostatic potential map, evaluate frontier molecular orbitals and calculate the vibrational spectra of the target compound. The silver-loaded graphene was shown to be an effective SERS substrate for CTZ trace detection. The SERS spectrum showed two enhanced bands at 670 cm-1 and 700 cm-1 which confirmed the absorption of the silver substrate through chlorine and nitrogen atoms. A detection limit as low as 5 nM could be reached with a determination coefficient of 0.9988 using the band at 670 cm-1. The protein-ligand interaction with Secreted Aspartic Proteinase 2 (SAP2) of C. albicans showed that the four stable forms of CTZ maintain a free energy of binding of 6-7 kcal/mol, which could give insights into the mode of action in treating Candidiasis.

Spectroscopic study of 2-methylindole and 3-methylindole: Solvents interactions and DFT studies.

The interaction between the 2- and 3-methylindole derivatives has been studied using spectroscopic technique and molecular modeling. Solvent polarity was found to play a great role in the interaction with acetonitrile showing greatest interaction with indole derivatives but less hydrogen bonding contribution. Good agreement was found between the models used for the analysis of experimental data and the theoretical calculations. Moreover, on the part of the quenching, benzonitrile was found to be better quencher over chlorobenzene, with 3-methylindole giving higher dynamic quenching constants.

Dimethylphosphinate bridged binuclear Rh(i) catalysts for the alkoxycarbonylation of aromatic C-H bonds.

A variety of binuclear rhodium(i) complexes featuring two bridging dimethylphosphinate ligands ((CH3)2PO2-) have been prepared and tested in the alkoxycarbonylation of aromatic C-H bonds. The complex [Rh(µ-κO,O'-(CH3)2PO2)(cod)]2 has been prepared by a reaction of [Rh(µ-MeO)(cod)]2 with 2 equivalents of dimethylphosphinic acid. Binuclear complexes [Rh(µ-κO,O'-(CH3)2PO2)(CO)L]2 (L = PPh3, P(OMe)Ph2 and P(OPh)3) were obtained by carbonylation of the related mononuclear complexes [Rh(κO-(CH3)2PO2)(cod)(L)], which were prepared in situ by the reaction of [Rh(µ-κO,O'-(CH3)2PO2)(cod)]2 with 2 equivalents of L. Conversely, if L = IPr, the reaction of [Rh(µ-κO,O'-(CH3)2PO2)(CO)L]2 with carbon monoxide affords the mononuclear complex [Rh(κO-(CH3)2PO2)(CO)2IPr]. The subsequent reaction with trimethylamine N-oxide gives the corresponding binuclear complex [Rh(µ-κO,O'-(CH3)2PO2)(CO)(IPr)]2 by abstraction of one of the carbonyl ligands. Complexes [Rh(µ-κO,O'-(CH3)2PO2)(cod)]2 and [Rh(κO-(CH3)2PO2)(cod)(L)] (L = IPr, PPh3, P(OMe)Ph2, P(OPh)3) are active precatalysts in the alkoxycarbonylation of C-H bonds, with the ligand system playing a key role in the catalytic activity. The complexes that feature more labile Rh-L bonds give rise to better catalysts, probably due to the more straightforward substitution of L by a second carbonyl ligand, since a more electrophilic carbonyl carbon atom is more susceptible toward aryl migration. In fact, complexes [Rh(µ-κO,O'-(CH3)2PO2)(CO)2]2 and [Rh(µ-Cl)(CO)2]2, generated in situ from [Rh(µ-κO,O'-(CH3)2PO2)(cod)]2 and [Rh(µ-Cl)(cod)2]2, respectively, are the most active catalysts tested in this work.

Molecular conformational analysis, vibrational spectra, NBO, NLO, HOMO-LUMO and molecular docking studies of ethyl 3-(E)-(anthracen-9-yl)prop-2-enoate based on density functional theory calculations.

FT-IR and FT-Raman spectra of ethyl 3-(E)-(anthracen-9-yl)prop-2-enoate were recorded and analyzed. The conformational behavior of the molecule was also investigated. The vibrational wavenumbers were calculated using DFT quantum chemical calculations. The data obtained from the wavenumber calculations were used to assign vibrational bands obtained experimentally. The geometrical parameters are in agreement with XRD data. The stability of the molecule arising from hyper-conjugative interaction and charge delocalization has been analyzed using NBO analysis. The HOMO and LUMO analysis were used to determine the charge transfer within the molecule and quantum chemical parameters related to the title compound. From the MEP analysis, it is clear that the negative electrostatic potential regions are mainly localized over the carbonyl groups and anthracene ring and are possible sites for electrophilic attack and the positive regions are localized at all the hydrogen atoms as possible sites for nucleophilic attack. NLO and NMR studies are also reported. Molecular docking studies suggest that the title compound might exhibit inhibitory activity against IDE and may act as an insulysin inhibitor. Conformational analysis is also reported.