In Silico Prediction of Plasma Concentrations of Fluconazole Capsules with Different Dissolution Profiles and Bioequivalence Study Using Population Simulation.

A biowaiver is accepted by the Brazilian Health Surveillance Agency (ANVISA) for immediate-release solid oral products containing Biopharmaceutics Classification System (BCS) class I drugs showing rapid drug dissolution. This study aimed to simulate plasma concentrations of fluconazole capsules with different dissolution profiles and run population simulation to evaluate their bioequivalence. The dissolution profiles of two batches of the reference product Zoltec® 150 mg capsules, A1 and A2, and two batches of other products (B1 and B2; C1 and C2), as well as plasma concentration-time data of the reference product from the literature, were used for the simulations. Although products C1 and C2 had drug dissolutions < 85% in 30 min at 0.1 M HCl, simulation results demonstrated that these products would show the same in vivo performance as products A1, A2, B1, and B2. Population simulation results of the ln-transformed 90% confidence interval for the ratio of Cmax and AUC0-t values for all products were within the 80-125% interval, showing to be bioequivalent. Thus, even though the in vitro dissolution behavior of products C1 and C2 was not equivalent to a rapid dissolution profile, the computer simulations proved to be an important tool to show the possibility of bioequivalence for these products.

Effect of Different Sampling Schedules on Results of Bioavailability and Bioequivalence Studies: Evaluation by Means of Monte Carlo Simulations.

Bioavailability and bioequivalence study is one of the most frequently performed investigations in clinical trials. Bioequivalence testing is based on the assumption that 2 drug products will be therapeutically equivalent when they are equivalent in the rate and extent to which the active drug ingredient or therapeutic moiety is absorbed and becomes available at the site of drug action. In recent years there has been a significant growth in published papers that use in silico studies based on mathematical simulations to analyze pharmacokinetic and pharmacodynamic properties of drugs, including bioavailability and bioequivalence aspects. The goal of this study is to evaluate the usefulness of in silico studies as a tool in the planning of bioequivalence, bioavailability and other pharmacokinetic assays, e.g., to determine an appropriate sampling schedule. Monte Carlo simulations were used to define adequate blood sampling schedules for a bioequivalence assay comparing 2 different formulations of cefadroxil oral suspensions. In silico bioequivalence studies comparing different formulation of cefadroxil oral suspensions using various sampling schedules were performed using models. An in vivo study was conducted to confirm in silico results. The results of in silico and in vivo bioequivalence studies demonstrated that schedules with fewer sampling times are as efficient as schedules with larger numbers of sampling times in the assessment of bioequivalence, but only if Tmax is included as a sampling time. It was also concluded that in silico studies are useful tools in the planning of bioequivalence, bioavailability and other pharmacokinetic in vivo assays.

Loading of halloysite nanotubes with BSA, α-Lac and ß-Lg: a Fourier transform infrared spectroscopic and thermogravimetric study.

Halloysite nanotubes (HNTs) are considered as ideal materials for biotechnological and medical applications. An important feature of halloysite is that it has a different surface chemistry on the inner and outer sides of the tubes. This property means that negatively-charged molecules can be selectively loaded inside the halloysite nanoscale its lumen. Loaded HNTs can be used for the controlled or sustained release of proteins, drugs, bioactive molecules and other agents. We studied the interaction between HNTs and bovine serum albumin, α lactalbumin and ß -lactoglobulin loaded into HTNs using Fourier transform infrared spectroscopy and thermogravimetry. These techniques enabled us to study the protein conformation and thermal stability, respectively, and to estimate the amount of protein loaded into the HNTs. TEM images confirmed the loading of proteins into HTNs.

Dissolution efficiency and bioequivalence study using urine data from healthy volunteers: a comparison between two tablet formulations of cephalexin / Eficiência de dissolução e estudo de bioequivalência utilizando dados de urina de voluntários saudáveis: uma comparação entre duas formulações de comprimidos de cefalexina

The aim of the present study was to assess the bioequivalence of two cephalexin tablet formulations available in the Brazilian market (product A as reference formulation and product B as test formulation). Dissolution efficiency (DE%) was calculated for both formulations to evaluate their in vitrobiopharmaceutical features. The oral bioequivalence study was performed in twenty-four healthy volunteers in a crossover design. Single oral dose (tablet containing 500 mg of cephalexin) of each product was administered with two weeks of washout period. Urinary concentrations of cephalexin were measured by high-performance liquid chromatography (HPLC) method and pharmacokinetics parameters were estimated by urinary excretion data. The bioequivalence was determined by the following parameters: the cumulative amount of cephalexin excreted in the urine, the total amount of cephalexin excreted in the urine and the maximum urinary excretion rate of cephalexin. DE values of immediate-release cephalexin tablets (500 mg) were 68.69±4.18% for product A and 71.03±6.63% for product B. Regarding the dissolution test of the two brands (A and B) analysed, both were in compliance with the official pharmacopeial specifications, since the dissolution of both formulations was superior to 80% of the amount declared in the label after 45 minutes of test (A=92.09%±1.84; B=92.84%±1.08). The results obtained indicated that the products A and B are pharmaceutical equivalents. Confidence intervals for the pharmacokinetic parameters were in compliance with the international standards, indicating that products A and B can be considered bioequivalents and, therefore, interchangeable...

O objetivo do presente estudo foi avaliar a bioequivalência de duas formulações de cefalexina disponíveis no mercado brasileiro (produto A como formulação referência e produto B como formulação teste). A eficiência de dissolução (DE%) foi calculada para ambas as formulações para avaliar suas características biofarmacêuticas. O estudo de bioequivalência oral foi realizado em vinte e quatro voluntários sadios utilizando um desenho cruzado. Uma dose oral única (comprimido contendo 500 mg de cefalexina) de cada produto foi administrada com um período de washout de duas semanas. Concentrações urinárias de cefalexina foram mensuradas por método de cromatografia líquida de alta eficiência (CLAE) e os parâmetros farmacocinéticos foram estimados por dados de excreção urinária. A bioequivalência foi determinada pelos seguintes parâmetros: quantidade acumulada da cefalexina excretada na urina, quantidade total da cefalexina excretada na urina e a taxa de excreção máxima da cefalexina. Os valores de DE dos comprimidos de liberação imediata de cefalexina (500 mg) foram 68,69±4,18% para o produto A e de 71,03±6,63% para o produto B. Com relação ao teste de dissolução das duas marcas analisadas (A e B), ambas apresentaram-se de acordo com as especificações farmacopéicas, uma vez que a dissolução de ambas formulações foi superior a 80% da quantidade declarada após 45 minutos de teste (A=92,09%±1,84; B=92,84% ±1,08). Os resultados obtidos indicaram que os produtos A e B são equivalentes farmacêuticos. Os intervalos de confiança para os parâmetros farmacocinéticos estavam de acordo com os padrões internacionais, demonstrando que os produtos A e B podem ser considerados bioequivalentes e, portanto, intercambiáveis...

Average bioequivalence of single 500 mg doses of two oral formulations of levofloxacin: a randomized, open-label, two-period crossover study in healthy adult Brazilian volunteers

Average bioequivalence of two 500 mg levofloxacin formulations available in Brazil, Tavanic(c) (Sanofi-Aventis Farmacêutica Ltda, Brazil, reference product) and Levaquin(c) (Janssen-Cilag Farmacêutica Ltda, Brazil, test product) was evaluated by means of a randomized, open-label, 2-way crossover study performed in 26 healthy Brazilian volunteers under fasting conditions. A single dose of 500 mg levofloxacin tablets was orally administered, and blood samples were collected over a period of 48 hours. Levofloxacin plasmatic concentrations were determined using a validated HPLC method. Pharmacokinetic parameters Cmax, Tmax, Kel, T1/2el, AUC0-t and AUC0-inf were calculated using noncompartmental analysis. Bioequivalence was determined by calculating 90% confidence intervals (90% CI) for the ratio of Cmax, AUC0-t and AUC0-inf values for test and reference products, using logarithmic transformed data. Tolerability was assessed by monitoring vital signs and laboratory analysis results, by subject interviews and by spontaneous report of adverse events. 90% CIs for Cmax, AUC0-t and AUC0-inf were 92.1% - 108.2%, 90.7% - 98.0%, and 94.8% - 100.0%, respectively. Observed adverse events were nausea and headache. It was concluded that Tavanic(c) and Levaquin(c) are bioequivalent, since 90% CIs are within the 80% - 125% interval proposed by regulatory agencies.

A bioequivalência média de duas formulações de levofloxacino disponíveis no Brasil, Tavanic(c) (Sanofi-Aventis Farmacêutica Ltda, Brasil, produto referência) e Levaquin(c) (Janssen-Cilag Farmacêutica Ltda, Brasil, produto teste) foi determinada por meio da realização de ensaio aleatório, aberto, cruzado, com dois períodos e duas sequências, em 26 voluntários sadios em condições de jejum. Amostras de sangue dos voluntários foram obtidas ao longo de um período de 48 horas após administração de dose única de 500 mg de levofloxacino. As concentrações plasmáticas do fármaco foram determinadas por método cromatográfico validado. Os parâmetros farmacocinéticos Cmax, Tmax, Kel, T1/2el, AUC0-t e AUC0-inf foram calculados por análise não compartimental. A bioequivalência foi determinada pelo cálculo de intervalos de confiança 90% (IC 90%) para as razões entre os valores de Cmax, AUC0-t e AUC0-inf obtidos para os produtos teste e referência, usando dados transformados logaritmicamente. A tolerabilidade foi avaliada pelo acompanhamento dos sinais vitais e resultados de exames laboratoriais, por consultas e por relato espontâneo dos voluntários. ICs 90% para Cmax, AUC0-t e AUC0-inf foram 92.1% - 108.2%, 90.7% - 98.0%, e 94.8% - 100.0%, respectivamente. Os eventos adversos observados foram náusea e cefaleia. Concluiu-se que os produtos Tavanic(c) e Levaquin(c) são bioequivalentes, uma vez que os ICs 90% estão dentro da faixa de 80%-125% proposta pelas agências reguladoras.

FTIR study of ageing of fast drying oil colour (FDOC) alkyd paint replicas.

We propose ATR-FTIR spectroscopy for the characterization of the spectral changes in alkyd resin from the Griffin Alkyd Fast Drying Oil Colour range (Winsor & Newton), occurring over 550 days (∼18 months) of natural ageing and over six months of artificial ageing under an acetic acid atmosphere. Acetic acid is one of the atmospheric pollutants found inside museums in concentrations that can have a significant effect on the works exhibited. During natural ageing we observed an increase and broadening of the OH group band around 3300 cm(-1) and an increase in bands in the region 1730-1680 cm(-1) due to carbonyl stretching. We found a broad band around 1635 cm(-1) likely due to CO stretching vibrations of ß dichetons. These spectral changes are the result of autooxidation reactions during natural ageing and crosslinking, which then form f alcohols and carbonyl species. The increase in absorbance at 1635 cm(-1) was selected as a parameter to monitor the ageing process of paintings prepared with FDOC, without the need for any extractive procedure. FTIR spectra of paint replicas kept under an acetic acid atmosphere indicated the chemical groups involved in the reaction with acid, thus suggesting which spectral FTIR regions could be investigated in order to follow any degradation in real paintings. A red paint sample from a hyper-realistic artwork ("Racconta storie", 2003) by the Italian painter Patrizia Zara was investigated by FTIR in order to evaluate the effects of 10 years natural ageing on alkyd colours. The results obtained suggested that after the end of chemical drying (autooxidation), alkyd colours are very stable.

Pharmacokinetics and bioequivalence evaluation of cyclobenzaprine tablets.

The purpose of this study was to investigate cyclobenzaprine pharmacokinetics and to evaluate bioequivalence between two different tablet formulations containing the drug. An open, randomized, crossover, single-dose, two-period, and two-sequence design was employed. Tablets were administered to 23 healthy subjects after an overnight fasting and blood samples were collected up to 240 hours after drug administration. Plasma cyclobenzaprine was quantified by means of an LC-MS/MS method. Pharmacokinetic parameters related to absorption, distribution, and elimination were calculated. Cyclobenzaprine plasma profiles for the reference and test products were similar, as well as absorption pharmacokinetic parameters AUC (reference: 199.4 ng ∗ h/mL; test: 201.6 ng ∗ h/mL), Cmax (reference: 7.0 ng/mL; test: 7.2 ng/mL), and T(max) (reference: 4.5 h; test: 4.6 h). Bioequivalence was evaluated by means of 90% confidence intervals for the ratio of AUC (93%-111%) and C(max) (93%-112%) values for test and reference products, which were within the 80%-125% interval proposed by FDA. Cyclobenzaprine pharmacokinetics can be described by a multicompartment open model with an average rapid elimination half-life (t(1/2)ß) of 3.1 hours and an average terminal elimination half-life (t(1/2)γ) of 31.9 hours.

Interaction of collagen with chlorosulphonated paraffin tanning agents: Fourier transform infrared spectroscopic analysis and molecular dynamics simulations.

The binding of chlorosulphonated paraffins to collagen triple helices is studied by means of classical molecular dynamics simulations and experimental spectroscopic techniques in order to disclose the principal characteristics of their interaction during the leather fattening process. Indeed, collagen is the main target to develop new leather modifying agents with specific characteristics, and an accurate design of the collagen binders, supported by predictive computational strategies, could be a successful tool to obtain new effective eco-compatible compounds able to impart to the leather the required functionalities and distinctive mechanical properties. Possible effects caused by the tanning agents on the collagen matrix have been identified from both experimental and theoretical points of view. Computational data in agreement with experiment have revealed that chlorosulphonated paraffins can interact favorably with the collagen residues having amine groups in their side chains (Arg, Lys, Asn and Gln) and reduce the tendency of the solvated collagen matrix to swell. However, the interference of chlorosulphonated paraffins with the unfolding process, which is operated mainly by the action of water, can be due both to covalent cross-linking of the collagen chains and intermolecular hydrogen bonding interactions involving also the hydroxyl groups of Hyp, Ser and Thr residues.

Biowaiver monographs for immediate release solid oral dosage forms: metronidazole.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing metronidazole are reviewed. Metronidazole can be assigned to Biopharmaceutics Classification System Class I. Most BE studies that were identified reported the investigated formulations to be bioequivalent, indicating the risk of bioinequivalence to be low. Formulations showing differences in bioavailability showed dissimilarities in in vitro dissolution profiles. Furthermore, metronidazole has a wide therapeutic index. It is concluded that a biowaiver for solid IR formulations is justified, provided: (a) the test product and its comparator are both rapidly dissolving; (b) meet similarity of the dissolution profiles at pH 1.2, 4.5, and 6.8; (c) the test product contains only excipients present in IR drug products approved in International Conference on Harmonisation (ICH) or associated countries in the same dosage form; and (d) if the test product contains sorbitol, sodium laurilsulfate, or propylene glycol, the test product needs to be qualitatively and quantitatively identical to its comparator with respect to these excipients [corrected]..

Bioequivalence evaluation of single doses of two tramadol formulations: a randomized, open-label, two-period crossover study in healthy Brazilian volunteers.

BACKGROUND: Tramadol is a well tolerated and effective analgesic used to treat moderate to severe pain. Several generic formulations of tramadol are available in Brazil; however, published information regarding their bioequivalence in the Brazilian population is not available. A study was designed for Brazilian regulatory authorities to allow marketing of a generic formulation. OBJECTIVE: The purpose of this study was to compare the bioequivalence of 2 commercial tablet preparations containing tramadol 100 mg marketed for use in Brazil. METHODS: A randomized, open-label, 2 x 2 crossover study was performed in healthy Brazilian volunteers under fasting conditions with a washout period of 12 days. Two tablet formulations of tramadol 100 mg (test and reference formulations) were administered as a single oral dose, and blood samples were collected over 24 hours. Tramadol plasma concentrations were quantified using a validated HPLC method. A plasma concentration-time profile was generated for each volunteer and then mean values were determined, from which C(max), T(max), AUC(0-infinity) k(e), and t(1/2) were calculated using a noncompartmental model. Bioequivalence between the products was determined by calculating 90% CIs for the ratios of C(max) AUC(0-t) and AUC(0-infinity), values for the test and reference products using log-transformed data. Tolerability was assessed by monitoring vital signs (temperature, blood pressure, heart rate), laboratory tests (hematology, blood biochemistry, hepatic function, urinalysis), and interviews with the volunteers before medication administration and every 2 hours during the study. RESULTS: Twenty-six healthy volunteers (13 men, 13 women) were enrolled in and completed the study. Mean (SD) age was 30 (6.8) years (range, 21-44 years), mean weight was 64 (8.3) kg (range, 53-79 kg), and mean height was 166 (6.4) cm (range, 155-178 cm). The 90% CIs for the ratios of Cmax (1.01-1.17), AUC(0-t) (1.00-1.13), and AUC(0-infinity). (1.00-1.14) values for the test and reference products fell within the interval of 0.80 to 1.25 proposed by most regulatory agencies, including the Brazilian regulatory body. No clinically important adverse effects were reported; only mild somnolence was reported by 4 volunteers and mild headaches by 5 volunteers, and there was no need to use medication to treat these symptoms. CONCLUSION: Pharmacokinetic analysis in these healthy Brazilian volunteers suggested that the test and reference formulations of tramadol 100-mg tablets met the regulatory requirements to assume bioequivalence based on the Brazilian regulatory definition.

Dissolution parameters for sodium diclofenac-containing hypromellose matrix tablet.

Sodium diclofenac (SD) release from dosage forms has been studied under different conditions. However, no dissolution method that is discriminatory enough to reflect slight changes in formulation or manufacturing process, and which could be effectively correlated with the biological properties of the dosage form, has been reported. This study sought to develop three different formulae of SD-containing matrix tablets and to determine the effect of agitation speed in its dissolution profiles. F1, F2 and F3 formulations were developed using hypromellose (10, 20 and 30%, respectively for F1, F2 and F3) and other conventional excipients. Dissolution tests were carried out in phosphate buffer pH 6.8 at 37 degrees C using apparatus II at 50, 75 or 100 rpm. Dissolution efficiency (DE), T(50) and T(90) were determined and plotted as functions of the variables agitation speed and hypromellose concentration. Regarding DE, F2 showed more sensitivity to variations in agitation speed than F1 and F3. Increasing hypromellose concentration reduced DE values, independent of agitation speed. Analysis of T(50) and T(90) suggests that F1 is less sensitive to variations in agitation speed than F2 and F3. Most discriminatory dissolution conditions were observed at 50 rpm. Results suggest that the comparison of dissolution performance of SD matrix tablets should take into account polymer concentration and agitation conditions.

Development and validation of a HPLC-MS-MS method for quantification of metronidazole in human plasma.

The objective of this study was to describe an analytical validation of a simple, rapid, sensitive, and selective liquid chromatography (LC)-tandem mass spectrometry (MS-MS) method for quantification of metronidazole in human plasma samples from bioavailability studies. The plasma samples were pre-treated by liquid-liquid extraction (LLE) with ethyl acetate. Metronidazole and the internal standard (IS) zidovudine were analyzed by combined reversed-phase LC-MS-MS with positive ion electrospray ionization. Multiple reactions monitoring (MRM) of the transitions were used as follows: m/z 171.97 > 127.97 for metronidazole and m/z 268.08 > 126.96 for IS. The main chromatography conditions used were a Varian C(18) Microssorb model (150 mm x 4.6 mm i.d., 5 microm particle size) column, and the mobile phase was composed of acetonitrile and 10 mM ammonium acetate (80:20, v/v) and 0.1% formic acid. Flow rate used was 1.0 mL/min with splitter. The method was linear over a concentration range of 0.05-8.00 microg/mL. Acceptable precision and accuracy were obtained for concentrations over the standard curve range. The developed method was validated and successfully applied to a pilot bioequivalence study of metronidazole in healthy volunteers.

Bioequivalence assay between orally disintegrating and conventional tablet formulations in healthy volunteers.

The purpose of this study was to evaluate bioequivalence of two commercial 8 mg tablet formulations of ondansetrona available in the Brazilian market. In this study, a simple, rapid, sensitive and selective liquid chromatography-tandem mass spectrometry method is described for the determination of ondansetron in human plasma samples. The method was validated over a concentration range of 2.5-60 ng/ml and used in a bioequivalence trial between orally disintegrating and conventional tablet ondansetron formulations, to assess its usefulness in this kind of study. Vonau flash (Biolab Sanus Farmacêutica, Brazil, as test formulations) and Zofran (GlaxoSmithKline, Brazil, as reference formulation) were evaluated following a single 8 mg dose to 23 healthy volunteers of both genders. The dose was administered after an overnight fast according to a two-way crossover design. Bioequivalence between the products was determinated by calculating 90% confidence interval (90% CI) for the ratio of C(max), AUC(0-t) and AUC(0-infinity) values for the test and reference products, using logarithmically transformed data. The 90% confidence interval for the ratio of C(max) (87.5-103.8%), AUC(0-t) (89.3-107.2%) and AUC(0-infinity) (89.7-106.0%) values for the test and reference products is within the 80-125% interval, proposed by FDA, EMEA and ANVISA. It was concluded that two ondansetron formulations are bioequivalent in their rate and extent of absorption.

Bioequivalence and pharmacokinetics of two zidovudine formulations in healthy Brazilian volunteers: an open-label, randomized, single-dose, two-way crossover study.

BACKGROUND: Zidovudine is a thymidine nucleoside reverse transcriptase inhibitor with activity against HIV type 1. Some (approximately 8) generic formulations of zidovudine are available in Brazil; however, based on a literature search, information concerning their bioavailability and pharmacokinetic properties in the Brazilian population has not been reported. OBJECTIVE: The aim of this study was to compare the bioavailability and pharmacokinetic properties of 2 capsule formulations of zidovudine 100 mg in healthy Brazilian volunteers. METHODS: This open-label, randomized, 2-way crossover study utilized a 1-week washout period between doses. Blood samples were collected for 8 hours after a single dose of zidovudine 100-mg test (Zidovudina, Fundação para o Remédio Popular, São Paulo, Brazil) or reference formulation (Retrovir, GlaxoSmithKline, Philadelphia, Pennsylvania). Plasma zidovudine concentrations were determined using a validated high-performance liquid chromatography method with ultraviolet detection at 265 nm. C(max), T(max), AUC(0-t), AUC(0-infinity), t(1/2), and the elimination constant (k(e)) were determined using noncompartmental analysis. The formulations were considered bioequivalent if the 90% CIs for C(max), AUC(0-t), and AUC(0-infinity) fell within the interval of 80% to 125%,the regulatory definition set by the US Food and Drug Administration (FDA). RESULTS: Twenty-four healthy volunteers (12 males, 12 females; mean age, 27 years; weight, 60 kg; height, 167 cm) were enrolled and completed the study. The 90% CIs of the treatment ratios for the logarithmic transformed values of C(max), AUC(max)0-t, and AUC(0-infinity) were 80.0% to 113.6%, 93.9% to 109.7%, and 93.6% to 110.1%, respectively. The values for the test and reference formulations were within the FDA bioequivalence definition intervals of 80% to 125%. CONCLUSIONS: In this small study in healthy subjects, no statistically significant differences in C(max), AUC(0-t), and AUC(0-infinity) were found between the test and reference formulations of zidovudine 100-mg capsules. The 90% CIs for the mean ratio values for the test and reference formulations of AUC(0-t), AUC(0-infinity), and C(max) indicated that the reported data were entirely within the bioequivalence acceptance range proposed by the FDA of 80% to 125% (using log-transformed data).

Bioequivalence study of two oral formulations of cefadroxil in healthy volunteers.

Two different cefadroxil (CAS 50370-12-2) formulations were evaluated for their relative bioavailability in 24 healthy volunteers who received a single 500 mg oral dose of each preparation. An open, randomized clinical trial designed as a two-period crossover study with a 7-day washout period between doses was employed. Plasma samples for assessments of their cefadroxil concentration by HPLC-UV were obtained over 8 h after administration. Values of 48.94 +/- 10.18 pg x h/ml for test, and 48.51 +/- 9.02 microg x h/ml for the reference preparation AUC(0-t) demonstrate a nearly identical extend of drug absorption. Maximum plasma concentration Cmax of 16.04 +/- 4.94 microg/ml and 16.01 + 4.02 microg/ml achieved for the test and reference preparations did not differ significantly. The parametric 90% confidence intervals (CI) of the mean of the difference (test-reference) between log-transformed values of the two formulations were 96.80% to 104.51% and 92.01% to 107.00% for AUC(0-t) and Cmax, respectively. Since for both AUC(0-t) or Cmax the 90% CI values are within the interval proposed by the Food and Drug Administration, the test product is bioequivalent to the reference product for both the rate and extent of absorption after single dose administration.

HPLC-UV determination of metformin in human plasma for application in pharmacokinetics and bioequivalence studies.

In this study, a simple, rapid and sensitive HPLC method with UV detection is described for determination of metformin in plasma samples from bioequivalence assays. Sample preparation was accomplished through protein precipitation with acetonitrile and chromatographic separation was performed on a reversed-phase phenyl column at 40 degrees C. Mobile phase consisted of a mixture of phosphate buffer and acetonitrile at flow rate of 1.0 ml/min. Wavelength was set at 236 nm. The method was applied to a bioequivalence study of two drug products containing metformin, and allowed determination of metformin at low concentrations with a higher throughput than previously described methods.

Bioequivalence evaluation of two different tablet formulations of tinidazole in healthy volunteers.

The bioequivalence of two different tablet formulations of tinidazole (CAS 19387-91-8) was determined in healthy volunteers after a single dose in a randomized crossover study, with a 1-week washout period between the doses. Reference and test products were administered to 24 volunteers with 240 mL water after overnight fasting. Plasma concentrations of tinidazole were monitored by a high-performance liquid chromatographic method (HPLC) over a period of 72 h after the administration. The pharmacokinetic parameters AUC(o-t), AUCo-infinity, C(max), T(max), T((1/2)el) and beta were determined from plasma concentration time profile of both formulations and found to be in good agreement with previously reported values. The calculated pharmacokinetic parameters were compared statistically to evaluate bioequivalence between the two brands. The analysis of variance (ANOVA) did not show any significant difference between the two formulations and 90% confidence intervals for the ratio of C(max) (93.9 -102.6%), AUC(o-t) (94.9-101.1%) and AUC(o-infinity) (94.6-100.8%) values for the test and reference products were within the 80-125% interval, satisfying the bioequivalence criteria of the European Committee for Proprietary Medicinal Products and the US Food and Drug Administration Guidelines. These results Indicate that the test and the reference products of tinidazole are bioequivalent and, thus, may be prescribed interchangeably.

Quantitation of nimesulide in human plasma by high-performance liquid chromatography with ultraviolet absorbance detection and its application to a bioequivalence study.

A rapid and simple high-performance liquid chromatography-reversed phase (HPLC-RV) method with ultraviolet detection (258 nm) was developed and validated for the quantitation of nimesulide (CAS 51803-78-2) in human plasma. After the plasma samples were extracted with 6.0 ml of dichloromethane containing the internal standard phenacetin 2 microg/ml in methanol, the analysis of the nimesulide level in the plasma samples was carried out using a reverse phase Supelcosil LC-18 (15 cm x 4.6 mm x 5 pm) column. The chromatographic separation was accomplished with an isocratic mobile phase consisting of a mixture of methanolphosphate buffer (pH 3.5; 0.01 mol/l) (55:45, v/v). The inter-assay accuracy ranged from 103.4 to 113.2%, while intra-day ranged from 105.6 to 117.5%. The inter-assay precision ranged from 11.7 to 14.6%, while intra-assay ranged from 3.2 to 9.5%. The recovery of nimesulide was determined as part of the assay validation process and was excellent. The linearity of the nimesulide curves ranged from 0.20 to 15.0 microg/ml (y = 0.3857-0.0081, r = 0.9975). Short-term stability showed that nimesulide is stable in plasma for at least 24 h at room temperature, while long-term stability studies showed that nimesulide is stable in plasma for at least 180 days when stored at -20 degrees C. This validated method was successfully applied to the bioequivalence study of nimesulide in tablets in healthy volunteers.

Bioavailability study of two oral formulations of didanosine in healthy volunteers.

An open-label, randomised, crossover single dose study, using 2 periods, 2 sequences, with a minimum washout period of 7 days, was conducted in order to assess the comparative bioavailability of two formulations of didanosine (CAS 69655-05-6) 100 mg tablets. Didanosine plasma concentrations were determined by means of a validated HPLC method [DAD detector, stavudine (CAS 3056-17-5) as an internal standard]. The limit of detection was 30 ng/ml. The results showed that overall classical 90 % confidence intervals (CI) were 92.4-111.2 % for AUC0-inf, 91.8-109.9 %f for AUC0-t, and 87.0-110.0 % for Cmax. Since the 90 % CI for both, AUC and Cmax ratios were within the 80-125 % interval proposed by the European Agency for the Evalution of Medicinal Products (EMEA) and Food and Drug Administration (FDA), it is concluded that the new didanosine formulation is equivalent to the conventional formulation for both, the extent and the rate of absorption after single dose administration in healthy volunteers.

Avaliação biofarmacotécnica in vitro de formas farmacêuticas sólidas contendo doxiciclina / In vitro biopharmaceutical evaluation of solid dosage formas containg doxycycline

A absorção de fármacos a partir de formas farmacêuticas sólidas, administradas por via oral, depende de sua liberação, da dissolução ou solubilização dos mesmos em condições fisiológicas e da permeabilidade das membranas do trato gastrintestinal. Portanto, a dissolução in vitro é fundamental para se prever o desempenho in vivo do fármaco. Pretendeu-se neste trabalho, realizar avaliação biofarmacotécnica in vitro através de testes físico-químicos e avaliação da cinética e eficiência de dissolução de quatro lotes de duas formulações do mercado nacional contendo 100mg de doxiciclina. Utilizou-se o método descrito pela Farmacopéia Americana para realização do ensaio de dissolução. A análise da cinética de dissolução foi avaliada por meio dos parâmetros...