Patterning damage mechanisms for two-dimensional crystalline polymers and evaluation for a conjugated imine-based polymer.

High-quality patterning determines the properties of patterned emerging two-dimensional (2D) conjugated polymers and is essential for potential applications in future electronic nanodevices. However, the most suitable patterning method for 2D polymers has yet to be determined because we still do not have a comprehensive understanding of their damage mechanisms by visualizing the structural modification that occurs during the patterning process. Here, the damage mechanisms during patterning of 2D polymers, induced by various patterning methods, are unveiled based on a systematic study of structural damage and edge morphology in an imine-based 2D polymer (polyimine). Patterning using a focused electron beam, focused ion beam (FIB) and mechanical carving is evaluated. The focused electron beam successively introduces a sputtering effect, knock-on displacement damage and massive radiolysis with increasing electron dose from9.46×107electrons nm-2to1.14×1010electrons nm-2. Successful patterning is enabled by knock-on damage but impeded by carbon contamination beyond a critical sample thickness. A FIB creates current-dependent edge morphologies and extensive damage from ion implantation caused by the tail of the unfocused beam. A precisely controlled tip can tear the polyimine film through grain boundaries and hence create a patterning edge with suitable edge roughness for certain application scenarios when beam damage is avoided. Taking structural damage and the resulting quantitative edge roughness into consideration, this study provides a detailed instruction on the proper patterning techniques for 2D crystalline polymers and paves the way for tailored intrinsic properties and device fabrication using these novel materials.

Pr3+-doped YPO4 nanocrystal embedded into an optical fiber.

Optical fiber with YPO4:Pr3+ nanocrystals (NCs) is presented for the first time using the glass powder-NCs doping method. The method's advantage is separate preparation of NCs and glass to preserve luminescent and optical properties of NCs once they are incorporated into optical fiber. The YPO4:Pr3+ nanocrystals were synthesized by the co-precipitation and hydrothermal methods, optimized for size (< 100 nm), shape, Pr3+ ions concentration (0.2 mol%), and emission lifetime. The core glass was selected from the non-silica P2O5-containing system with refractive index (n = 1.788) close to the NCs (no = 1.657, ne = 1.838). Optical fiber was drawn by modified powder-in-tube method after pre-sintering of glass powder-YPO4:Pr3+ (wt 3%) mixture to form optical fiber preform. Luminescent properties of YPO4:Pr3+ and optical fiber showed their excellent agreement, including sharp Pr3+ emission at 600 nm (1D2-3H4) and 1D2 level lifetime (τ = 156 ± 5 µs) under 488 nm excitation. The distribution of the YPO4:Pr3+ NCs in optical fiber were analyzed by TEM-EDS in the core region (FIB-SEM-prepared). The successful usage of glass powder-NCs doping method was discussed in the aspect of promising properties of the first YPO4:Pr3+ doped optical fiber as a new way to develop active materials for lasing applications, among others.

Morphology and Mechanical Properties of Fossil Diatom Frustules from Genera of Ellerbeckia and Melosira.

Fossil frustules of Ellerbeckia and Melosira were studied using laboratory-based nano X-ray tomography (nano-XCT), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). Three-dimensional (3D) morphology characterization using nondestructive nano-XCT reveals the continuous connection of fultoportulae, tube processes and protrusions. The study confirms that Ellerbeckia is different from Melosira. Both genera reveal heavily silicified frustules with valve faces linking together and forming cylindrical chains. For this cylindrical architecture of both genera, valve face thickness, mantle wall thickness and copulae thickness change with the cylindrical diameter. Furthermore, EDS reveals that these fossil frustules contain Si and O only, with no other elements in the percentage concentration range. Nanopores with a diameter of approximately 15 nm were detected inside the biosilica of both genera using TEM. In situ micromechanical experiments with uniaxial loading were carried out within the nano-XCT on these fossil frustules to determine the maximal loading force under compression and to describe the fracture behavior. The fracture force of both genera is correlated to the dimension of the fossil frustules. The results from in situ mechanical tests show that the crack initiation starts either at very thin features or at linking structures of the frustules.

Thermophoretic trap for single amyloid fibril and protein aggregation studies.

The study of the aggregation of soluble proteins into highly ordered, insoluble amyloid fibrils is fundamental for the understanding of neurodegenerative disorders. Here, we present a method for the observation of single amyloid fibrils that allows the investigation of fibril growth, secondary nucleation or fibril breakup that is typically hidden in the average ensemble. Our approach of thermophoretic trapping and rotational diffusion measurements is demonstrated for single Aß40, Aß42 and pyroglutamyl-modified amyloid-ß variant (pGlu3-Aß3-40) amyloid fibrils.

Portable and low-cost biosensor towards on-site detection of diclofenac in wastewater.

Wastewater treatment plants are the main release sources of pharmaceutical compounds present in surface waters. Even at low concentrations, many of these substances have long-term adverse effects on the environment. For an efficient control of pharmaceutical removal, a real-time recognition is a prerequisite. Currently, quantification of such compounds is done in special equipped laboratories and is rather time-consuming and expensive. Here, we introduce a novel biosensor for the detection of the pharmaceutical compound diclofenac, which can be produced with low costs, is easy in handling and can be applied directly on-site. Recognition of diclofenac is based on genetically engineered yeast cells which produce green fluorescent protein in a diclofenac concentration-dependent manner. Centerpiece of the sensor is a foil-based microfluidic flow cell, which allows supply with nutrient solution and analyte while preventing loss of reporter cells. Readout of data is accomplished by a newly developed spectrometric detection unit. With this device, we are able to determine diclofenac concentrations in a range from 10 to 50 µM.