Catharanthus roseus-mediated CuAl2O4 nanocomposites for evaluation of killing kinetics.

The present article portrayed on the killing kinetic of human pathogenic bacteria using bioinspired mesoporous CuAl2O4 nanocomposites (NCs). The NCs was fabricated using leaf extract of medicinal plant Catharanthus roseus (CR) as a green reducer and stabilizer. As bio-fabricated material was calcined at 800 °C and characterized by several analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), Ultraviolet-Visible Diffuse Reflectance Spectroscopy (UV-DRS), Energy Dispersive X-Ray Spectroscopy (EDS), X-Ray Photoelectron Spectroscopy (XPS), Raman, Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM) to authenticate its structure, phase, chemical bonding, chemical state, size and morphology behaviors. XRD and TEM revealed a reduced crystallite and nanoscale sizes of biosynthesized NCs. Moreover, XRD study exposed a cubic-structure of material, while transmission electron microscopy rendered an average particles size in range 10-15 nm. However, BET profile advocates a mesoporous nature of the particles. An effective biological molecular docking modulation assessed by substituting natural inhibitor by bioinspired NCs, while the protein PDB ID 4Z8D FabH as a receptor site for the present investigation. After assessment of molecular docking examination, the antibacterial activity of bioinspired NCs were performed against Staphylococcus aureus, Bacillus subtillis, Klebsiella pneumoniae and Escherichia coli using agar-well method. The broth culture method was employed on different pathogenic strains by kinetic growth assays and colony forming unit.

Bioinspired graphene-based metal oxide nanocomposites for photocatalytic and electrochemical performances: an updated review.

Considering the rapidly increasing population, the development of new resources, skills, and devices that can provide safe potable water and clean energy remains one of the vital research topics for the scientific community. Owing to this, scientific community discovered such material for tackle this issue of environment benign, the new materials with graphene functionalized derivatives show significant advantages for application in multifunctional catalysis and energy storage systems. Herein, we highlight the recent methods reported for the preparation of graphene-based materials by focusing on the following aspects: (i) transformation of graphite/graphite oxide into graphene/graphene oxide via exfoliation and reduction; (ii) bioinspired fabrication or modification of graphene with various metal oxides and its applications in photocatalysis and storage systems. The kinetics of photocatalysis and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) for the optimization of the degradation efficiency of organic dyes, phenol compounds, antibiotics, and pharmaceutical drugs are discussed. Further, we present a brief introduction on different graphene-based metal oxides and a systematic survey of the recently published research literature on electrode materials for lithium-ion batteries (LIBs), supercapacitors, and fuel cells. Subsequently, the power density, stability, pseudocapacitance charge/discharge process, capacity and electrochemical reaction mechanisms of intercalation, and conversion- and alloying-type anode materials are summarized in detail. Furthermore, we thoroughly distinguish the intrinsic differences among underpotential deposition, intercalation, and conventional pseudocapacitance of electrode materials. This review offers a meaningful reference for the construction and fabrication of graphene-based metal oxides as effective photocatalysts for photodegradation study and high-performance optimization of anode materials for LIBs, supercapacitors, and fuel cells.

Biomedical,clinical and environmental applications of platinum-based nanohybrids: An updated review.

Platinum nanoparticles (Pt NPs) have numerous applications in various sectors, including pharmacology, nanomedicine, cancer therapy, radiotherapy, biotechnology and environment mitigation like removal of toxic metals from wastewater, photocatalytic degradation of toxic compounds, adsorption, and water splitting. The multifaceted applications of Pt NPs because of their ultra-fine structures, large surface area, tuned porosity, coordination-binding, and excellent physiochemical properties. The various types of nanohybrids (NHs) of Pt NPs can be fabricated by doping with different metal/metal oxide/polymer-based materials. There are several methods to synthesize platinum-based NHs, but biological processes are admirable because of green, economical, sustainable, and non-toxic. Due to the robust physicochemical and biological characteristics of platinum NPs, they are widely employed as nanocatalyst, antioxidant, antipathogenic, and anticancer agents. Indeed, Pt-based NHs are the subject of keen interest and substantial research area for biomedical and clinical applications. Hence, this review systematically studies antimicrobial, biological, and environmental applications of platinum and platinum-based NHs, predominantly for treating cancer and photo-thermal therapy. Applications of Pt NPs in nanomedicine and nano-diagnosis are also highlighted. Pt NPs-related nanotoxicity and the potential and opportunity for future nano-therapeutics based on Pt NPs are also discussed.

Biosynthesized δ-Bi2O3 Nanoparticles from Crinum viviparum Flower Extract for Photocatalytic Dye Degradation and Molecular Docking.

Bioinspired delta-bismuth oxide nanoparticles (δ-Bi2O3 NPs) have been synthesized using a greener reducing agent and surfactant via co-precipitation method. The originality of this work is the use of Crinum viviparum flower extract for the first time for the fabrication of NPs, which were further calcined at 800 °C to obtain δ-Bi2O3 NPs. Physicochemical studies such as FTIR spectroscopy and XPS confirmed the formation of Bi2O3 NPs, whereas XRD and Raman verified the formation of the cubic delta (δ) phase of Bi2O3 NPs. However, HRTEM revealed the spherical shape with diameter 10-20 nm, while BET studies expose mesoporous nature with a surface area of 71 m2/gm. The band gap for δ-Bi2O3 NPs was estimated to be 3.45 eV, which ensured δ-Bi2O3 to be a promising photocatalyst under visible-light irradiation. Therefore, based on the results of physicochemical studies, the bioinspired δ-Bi2O3 NPs were explored as active photocatalysts for the degradation of toxic dyes, viz., Thymol blue (TB) and Congo red (CR) under visible-light irradiation. The study showed 98.26% degradation of TB in 40 min and 69.67% degradation of CR in 80 min by δ-Bi2O3 NPs. The photogenerated holes and electrons were found responsible for this enhancement. Furthermore, molecular docking investigations were also performed for δ-Bi2O3 NPs to understand its biological function as New Delhi metallo-ß-lactamase 1 (NDM-1) [PDB ID 5XP9] enzyme inhibitor, and studies revealed good interaction with various amino acid residues and found good hydrogen bonding with a fine pose energy of -3.851 kcal/mole.

Bioinspired NiO Nanospheres: Exploring In Vitro Toxicity Using Bm-17 and L. rohita Liver Cells, DNA Degradation, Docking, and Proposed Vacuolization Mechanism.

The present work demonstrated a novel Cleome simplicifolia-mediated green fabrication of nickel oxide nanoparticles (NiO NPs) to explore in vitro toxicity in Bm-17 and Labeo rohita liver cells. As-fabricated bioinspired NiO NPs were characterized by several analytical techniques. X-ray diffraction (XRD) revealed a crystalline face-centered-cubic structure. Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) confirmed NiO formation. The chemical composition was confirmed by energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy. Brunauer-Emmett-Teller (BET) revealed the mesoporous nature. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the formation of 97 nm diameter nanospheres formed due to the congregation of 10 nm size particles. Atomic force microscopy (AFM) revealed the nearly isotropic behavior of NiO NPs. Further, a molecular docking study was performed to explore their toxicity by binding with genetic molecules, and it was found that the docking energy was about -9.65284 kcal/mol. On evaluating the in vitro toxicity of NiO NPs for Bm-17 cells, the study showed that when cells were treated with a high concentration of NPs, cells were affected severely by toxicity, while at a lower concentration, cells were affected slightly. Further, on using 50 µg/mL, quick deaths of cells were observed due to the formation of more vacuoles in the cells. The DNA degradation study revealed that NiO NPs are significantly responsible for DNA degradation. For further confirmation, trypan blue assay was observed for cell viability, and morphological assessment was performed using inverted tissue culture microscopy. Further, the cytotoxicity of NiO NPs in L. rohita liver cells was studied. No toxicity was observed at 1 mg/L of NiO NPs; however, when the concentration was 30 and 90 mg/L, dark and shrank hepatic parenchyma was observed. Hence, the main cause of cell lysis is the increased vacuolization in the cells. Thus, the present study suggests that the cytotoxicity induced by NiO NPs could be used in anticancer drugs.

Bioinspired Reduced Graphene Oxide Based Nanohybrids for Photocatalysis and Antibacterial Applications.

Ultra-thin graphene has been receiving significance in the diverse sections of material science, owing to its exceptional physicochemical and thermo-mechanical characteristics. Currently, the fabrication of high-grade graphene in an economical target and green procedures area is a massive concern. Among the diverse techniques, chemical-mediated fabrication is believed to be the finest process since it is simple, scalable, and of low-cost; however, it involves noxious or hazardous chemical reducers for producing functional graphene-based Nanocomposites (NCs). Therefore, around the globe, scientists are endeavoring to adopt the bioinspired techniques to manufacture the functional reduced Graphene Oxide (rGO) and reduced Graphene Oxide-Metal/Metal Oxide (rGO-M/MO) NCs. Hence, keeping this issue in mind, the present review article summarize and integrates the current state of knowledge about the diverse bioinspired strategies developed to obtain rGO and rGO-M/MO NCs and their photocatalytic, antibacterial, and cytotoxic assessments.

Mesoporous Octahedron-Shaped Tricobalt Tetroxide Nanoparticles for Photocatalytic Degradation of Toxic Dyes.

The present article reports a facile approach to fabrication of mesoporous octahedron-shaped tricobalt tetroxide nanoparticles (Co3O4 NPs) with a very narrow size distribution for eco-friendly remediation of toxic dyes. Co3O4 NPs were fabricated by a sol-gel process using cobalt chloride hexahydrate (CoCl2·6H2O) and monosodium succinate (C4H5O4Na) as a chelating/structure-directing agent and sodium dodecyl sulfate as a surfactant. Moreover, the phase structure, elemental composition, and thermal and morphological facets of Co3O4 NPs were investigated using XRD, FT-IR, EDS, Raman, XPS, TGA, SEM, and TEM techniques. The face-centered cubic spinel crystalline structure of the Co3O4 NPs was confirmed by XRD and SEM, and TEM analysis revealed their octahedron morphology with a smooth surface. Moreover, the narrow pore size distribution and the mesoporous nature of the Co3O4 NPs were confirmed by Brunauer-Emmett-Teller measurements. The photocatalytic activity of Co3O4 NPs for degradation of methyl red (MR), Eriochrome Black-T (EBT), bromophenol blue (BPB), and malachite green (MG) was examined under visible light irradiation, and the kinetics of the dye degradation was pseudo-zero-order with the rate constant in the order of MR > EBT > MG > BPB. Furthermore, the mechanism of photo-disintegration mechanism of the dye was examined by a scavenging test using liquid chromatography-mass chromatography, and its excellent photodegradation activities were attributed to the photogenerated holes (h+), superoxide (O2 -) anions, and hydroxyl (·OH) radicals. Finally, the synergistic effect of the nano-interconnected channels with octahedron geometry, mesoporous nature, and charge transfer properties along with photogenerated charge separations leads to an enhanced Co3O4 photocatalytic activity.

Metal/Metal Oxide Nanoparticles: Toxicity, Applications, and Future Prospects.

The ever-growing resistance of pathogens to antibiotics and crop disease due to pest has triggered severe health concerns in recent years. Consequently, there is a need of powerful and protective materials for the eradication of diseases. Metal/metal oxide nanoparticles (M/MO NPs) are powerful agents due to their therapeutic effects in microbial infections. In this context, the present review article discusses the toxicity, fate, effects and applications of M/MO NPs. This review starts with an introduction, followed by toxicity aspects, antibacterial and testing methods and mechanism. In addition, discussion on the impact of different M/MO NPs and their characteristics such as size, shape, particle dissolution on their induced toxicity on food and plants, as well as applications in pesticides. Finally, prospective on current and future issues are presented.

Phytosynthesis of nearly monodisperse CuO nanospheres using Phyllanthus reticulatus/Conyza bonariensis and its antioxidant/antibacterial assays.

In the present article we have developed an eco-friendly, phytosynthetic, cost-effective and straightforward method for the synthesis of nearly monodisperse CuO nanospheres (NSP) using leaf extracts of medicinal plants Phyllanthus reticulatus (PR) and Conyza bonariensis (CB) as novel green reducing agents. Copper nitrate (Cu (NO3)2) was used as a precursor. The stoichiometric ratio of both leaf extracts (PR/CB) and Cu(NO3)2 was standardized for the synthesis of NSP. During formation of CuO NSP, a color of solution gradually changed from light greenish-blue to black with a number of intermediate stages and it correlated to the reduction reaction catalyzed by phytochemicals. As-synthesized materials were characterized in detail at the structural, electronic level and morphological authentication by XRD, FT-IR, EDS, UV-DRS, Raman, XPS, SEM, TEM, BET and AFM. SEM studies of phytosynthesized materials revealed nearly monodisperse nanospheres, while TEM rendered average particles size 4-14 nm. Also, AFM profiles suggested a homogenized nature of the nanospheres. Then, the antioxidant property was obtained by α, α-diphenyl-ß-picrylhydrazyl (DPPH). Ethanolic, methanolic extracts were used for the antioxidant activity, while ascorbic acid was used as a standard medium. Each plant extract exhibited noteworthy antioxidant activity. Moreover, the antibacterial activity of CuO NSP (PR/CB) was tested against human pathogenic bacteria viz. gram-positive Staphylococcus aureus, Klebsiella pneumoniae, and gram-negative Escherichia coli. Result rendered effective antibacterial activity against Escherichia coli.