Evaluation of the efficacy of marine natural products against PARP-1/2 proteins in high-grade serous ovarian cancer: insights into MD and SMD simulations.

High-grade serous ovarian cancer (HGSOC) is the most malignant and ubiquitous phenotype of epithelial ovarian cancer. Originating in the fallopian tubes and rapidly spreading to the ovaries, this highly heterogeneous disease is a result of serous tubal intraepithelial carcinoma. The proteins known as poly(ADP-ribose) polymerase (PARP) aid in the development of HGSOC by repairing the cancer cells that proliferate and spread metastatically. By using molecular docking to screen 1100 marine natural products (MNPs) from different marine environments against PARP-1/2 proteins, prominent PARP inhibitors (PARPi) were identified. Four compounds, alisiaquinone A, alisiaquinone C, ascomindone D and (+)-zampanolide referred to as MNP-1, MNP-2, MNP-3 and MNP-4, respectively, were chosen based on their binding affinity towards PARP-1/2 proteins, and their bioavailability and drug-like qualities were accessed using ADMET analysis. To investigate the structural stability and dynamics of these complexes, molecular dynamics simulations were performed for 200 ns. These results were compared with the complexes of olaparib (OLA), a PARPi that has been approved by the FDA for the treatment of advanced ovarian cancer. We determined that MNP-4 exhibited stronger binding energies with PARP-1/2 proteins than OLA by using MM/PBSA calculations. Hotspot residues from PARP-1 (E883, M890, Y896, D899 and Y907) and PARP-2 (Y449, F450, A451, S457 and Y460) showed strong interactions with the compounds. To comprehend the unbinding mechanism of MNP-4 complexed with PARP-1/2, steered molecular dynamics (SMD) simulations were performed. We concluded from the free energy landscape (FEL) map that PARP-1/2 are well-stabilised when the compound MNP-4 is bound rather than being pulled away from its binding pockets. This finding provides significant evidence regarding PARPi, which could potentially be employed in the therapeutic treatment of HGSOC.Communicated by Ramaswamy H. Sarma.

Microhydration of small protonated polyaromatic hydrocarbons: a first principles study.

Using first principles methodology, we investigate the microsolvation of protonated benzene (BzH+), protonated coronene (CorH+) and protonated dodecabenzocoronene (DbcH+). Gas phase complexes of these small protonated polyaromatic hydrocarbons (H+PAHs) with mono-, di-, and tri-hydrated water molecules are considered. Their most stable forms are presented, where we discuss their structural, energetic aromaticity and IR and UV spectral features. In particular, we focus on the analysis of the bonding and various non-bonded interactions between these protonated aromatics and water clusters. The strength of non-bonded interactions is quantified and correlated with their electron density profiles. Furthermore, insights into the interfacial interactions and stability of these complexes were obtained through non-covalent index and symmetry-adapted perturbation theory (SAPT0) analyses. We also discuss the effects of the extension of the π aromatic cloud on the water solvation of these protonated aromatics. In particular, we extended our predictions for the S0 → S1 and S0 → T1 wavelength transitions of micro hydrated H+PAHs to deduce those of these species solvated in aqueous solution. The present findings should be useful for understanding, at the microscopic level, the effects of water interacting with H+PAHs, which are relevant for organic chemistry, astrochemistry, atmospheric chemistry, combustion and materials science.

Dual Anti-Inflammatory and Anticancer Activity of Novel 1,5-Diaryl Pyrazole Derivatives: Molecular Modeling, Synthesis, In Vitro Activity, and Dynamics Study.

A series of novel 1,5-diaryl pyrazole derivatives targeting the COX enzyme were designed by combined ligand and structure-based approach. The designed molecules were then further subjected to ADMET and molecular docking studies. Out of 34 designed compounds, the top-10 molecules from the computation studies were synthesized, characterized, and evaluated for COX-2 inhibition and anti-cancer activity. Initially, the target compounds were screened for the protein denaturation assay. The results of the top-five molecules T2, T3, T5, T6, and T9 were further subjected to in vitro COX-2 enzymatic assay and anti-cancer activity. As far as COX-2 inhibitory activity is considered, two compounds, T3 and T5, exhibited the half maximum inhibitory concentration (IC50) at 0.781 µM and 0.781 µM respectively. Further, the two compounds T3 and T5, when evaluated for COX-1 inhibition, exhibited excellent inhibitory activity with T3 IC50 of 4.655µM and T5 with IC50 of 5.596 µM. The compound T5 showed more significant human COX-2 inhibition, with a selectivity index of 7.16, when compared with T3, which had a selectivity index of 5.96. Further, in vitro anti-cancer activity was screened against two cancer cell lines in which compounds T2 and T3 were active against A549 cell lines and T6 was active against the HepG2 cell line. Stronger binding energy was found by comparing MM-PBSA simulations with molecular docking, which suggests that compounds T3 and T5 have a better possibility of being effective compounds, in which T5 showed higher binding affinity. The results suggest that these compounds have the potential to develop effective COX-2 inhibitors as anti-cancer agents.

Identification of indole-based natural compounds as inhibitors of PARP-1 against triple-negative breast cancer: a computational study.

Triple-negative breast cancer (TNBC) is the most aggressive kind of breast cancer known to mankind. It is a heterogeneous disease that is formed due to the missing estrogen, progesterone and human epidermal growth factor 2 receptors. Poly(ADP-ribose) polymerase-1 (PARP-1) protein helps in the development of TNBC by repairing the cancer cells, which proliferate and spread metastatically. To determine the potential PARP-1 inhibitors (PARPi), 0.2 million natural products from Universal Natural Product Database were screened using molecular docking and six hit compounds were selected based on their binding affinity towards PARP-1. The bio-availability and drug-like properties of these natural products were evaluated using ADMET analysis. Molecular dynamics simulations were conducted for these complexes for 200 ns to examine their structural stability and dynamic behaviour and further compared with the complex of talazoparib (TALA), an FDA-approved PARPi. Using MM/PBSA calculations, we conclude that the complexes HIT-3 and HIT-5 (-25.64 and -23.14 kcal/mol, respectively) show stronger binding energies with PARP-1 than TALA with PARP-1 (-10.74 kcal/mol). Strong interactions were observed between the compounds and hotspot residues, Asp770, Ala880, Tyr889, Tyr896, Ala898, Asp899 and Tyr907, of PARP-1 due to the existence of various types of non-covalent interactions between the compounds and PARP-1. This research offers critical information about PARPi, which could potentially be incorporated into the treatment of TNBC. Moreover, these findings were validated by comparing them with an FDA-approved PARPi.

Formation of Eigen or Zundel Features at Protonated Water Cluster-Aromatic Interfaces.

Interfacial interactions of protonated water clusters adsorbed at aromatic surfaces play an important role in biology, and in atmospheric, chemical and materials sciences. Here, we investigate the interaction of protonated water clusters ((H+ H2 O)n (where n=1-3)) with benzene (Bz), coronene (Cor) and dodecabenzocoronene (Dbc)). To study the structure, stability and spectral features of these complexes, computations are done using DFT-PBE0(+D3) and SAPT0 methods. These interactions are probed by AIM electron density topography and non-covalent interactions index (NCI) analyses. We suggest that the excess proton plays a crucial role in the stability of these model interfaces through strong inductive effects and the formation of Eigen or Zundel features. Also, computations reveal that the extension of the π-aromatic system and the increase of the number of water molecules in the H-bounded water network led to a strengthening of the interactions between the corresponding aromatic compound and protonated water molecules, except when a Zundel ion is formed. The present findings may serve to understand in-depth the role of proton localized at aqueous medium interacting with large aromatic surfaces such as graphene interacting with acidic liquid water. Besides, we give the IR and UV-Vis spectra of these complexes, which may help for their identification in laboratory.

Discovery of novel HDAC8 inhibitors from natural compounds by in silico high throughput screening.

A class I histone deacetylase HDAC8 is associated with several diseases, including cancer, intellectual impairment and parasite infection. Most of the HDAC inhibitors that have so far been found to inhibit HDAC8 limit their efficacy in the clinic by producing toxicities. It is therefore very desirable to develop specific HDAC8 inhibitors. The emergence of HDAC inhibitors derived from natural sources has become quite popular. In recent decades, it has been shown that naturally occurring HDAC inhibitors have strong anticancer properties. A total of 0.2 million natural compounds were screened against HDAC8 from the Universal Natural Product Database (UNPD). Molecular docking was performed for these natural compounds and the top six hits were obtained. In addition, molecular dynamics (MD) simulations were used to evaluate the structural stability and binding affinity of the inhibitors, which showed that the protein-ligand complexes remained stable throughout the 100 ns simulation. MM-PBSA method demonstrated that the selected compounds have high affinity towards HDAC8. We infer from our findings that Hit-1 (-29.35 kcal mol-1), Hit-2 (-29.15 kcal mol-1) and Hit-6 (-30.28 kcal mol-1) have better binding affinity and adhesion to ADMET (absorption, distribution, metabolism, excretion and toxicity) characteristics against HDAC8. To compare our discussions and result in an effective way. We performed molecular docking, MD and MM-PBSA analysis for the FDA-approved drug romidepsin. The above results show that our hits show better binding affinity than the compound romidepsin (-12.03 ± 4.66 kcal mol-1). The important hotspot residues Asp29, Ile34, Trp141, Phe152, Asp267, Met274 and Tyr306 have significantly contributed to the protein-ligand interaction. These findings suggest that in vitro testing and additional optimization may lead to the development of HDAC8 inhibitors.Communicated by Ramaswamy H. Sarma.

Compounds from diverse natural origin against triple-negative breast cancer: A comprehensive review.

Triple-negative breast cancer (TNBC) is caused due to the lack of estrogen receptors (ER), progesterone receptors (PR), and human epidermal growth factor 2 (HER2) expression. Triple-negative breast cancer is the most aggressive heterogeneous disease that is capable of producing different clones and mutations. Tumorigenesis in TNBC is caused due to the mutation or overexpression of tumor suppressor genes. It is also associated with mutations in the BRCA gene which is linked to hereditary breast cancer. In addition, PARP proteins and checkpoint proteins also play a crucial function in causing TNBC. Many cell signaling pathways are dysregulated in TNBC. Even though chemotherapy and immunotherapy are good options for TNBC treatment, the response rates are still low in general. Many phytochemicals that are derived from natural compounds have shown very good inhibitions for TNBC. Natural compounds have the great advantage of being less toxic, having lesser side effects, and being easily available. The secondary metabolites such as alkaloids, terpenoids, steroids, and flavonoids in natural products make them promising inhibitors of TNBC. Their compositions also offer vital insights into inhibitory action, which could lead to new cancer-fighting strategies. This review can help in understanding how naturally occurring substances and medicinal herbs decrease specific tumors and pave the way for the development of novel and extremely efficient antitumor therapies.

Counteractive Effects of Choline Geranate (CAGE) ILs and Ethanol on Insulin's Stability-A Leap Forward towards Oral Insulin Formulation.

Choline geranate (CAGE) ionic liquids (ILs) stabilize insulin, thereby aiding its oral delivery, whereas ethanol (EtOH) affects its stability by disrupting the hydrophobic interactions. In this study, cognizance of the stabilization mechanism of insulin dimer in the presence of both CAGE ILs and EtOH mixtures is achieved through biased and unbiased molecular dynamics (MD) simulations. Here, two order parameters are employed to study the insulin dimer dissociation using well-tempered metadynamics (WT-MetaD). The stability of insulin is found to be strongly maintained until a 0.20 mole fraction of EtOH. Besides, higher concentrations of EtOH marginally affect the insulin stability. Moreover, geranate anions form a higher number of H-bonding interactions with water molecules, which aids insulin stabilization. Conversely, the addition of EtOH minimizes the water-mediated H-bonding interactions of geranate. Additionally, geranate traps the EtOH molecules, thereby preventing the interactions between insulin and EtOH. Furthermore, the free energy landscape (FEL) reveals the absence of dimer dissociation along with noticeable deviations in the distances R and the number of contacts Q. The dimerization free energy of insulin was calculated to be -16.1 kcal/mol at a 0.20 mole fraction of EtOH. Moreover, increments in mole fractions of EtOH effectuate a decrease in the insulin stability. Thus, the present study represents CAGE ILs as efficient insulin dimer stabilizes at low concentrations of EtOH.

Design of Ascorbic Acid Eutectic Mixtures With Sugars to Inhibit Oxidative Degradation.

L-Ascorbic acid (ASC), commonly known as vitamin C, acts as an anti-oxidant in the biological system. It is extensively used as an excipient in pharmaceutical industry, food supplements in fruit juices, and food materials due to its free radicals scavenging activity. Main drawback of ASC is its poor aqueous stability owing to the presence of lactone moiety that is easily oxidized to dehydroascorbic acid and further degraded. To improve aqueous stability and inhibit oxidative degradation, ASC was co-crystallized to constitute binary eutectic compositions with mono and di-saccharides such as glucose, sucrose, lactose, and mannitol. The eutectics were confirmed by their (single) lower melting endotherm compared to ASC and sugars, although Powder X-ray diffraction (PXRD) and Fourier transform Infrared spectroscopy (FT-IR) data confirmed the characteristics of their physical mixture. Scanning electron microscope (SEM) images of the binary eutectics confirmed their irregular morphology. The ASC eutectics exhibited improved shelf-life by 2-5-fold in weakly acidic (pH 5) and neutral (pH 7) aqueous buffer medium, whereas the eutectic with glucose enhanced shelf-life only by 1.1-1.2-fold in acidic medium (pH 3.3 and 4). Notably, stabilizing effect of the sugar eutectics decreased with increasing acidity of the medium. In addition, higher binding energy of the disaccharide eutectics partially supports the aqueous stability order of ASC in the neutral pH medium due to more number of non-bonded interactions than that of monosaccharides.

Antiviral activities of natural compounds and ionic liquids to inhibit the Mpro of SARS-CoV-2: a computational approach.

The recalcitrant spread of the COVID-19 pandemic produced by the novel coronavirus SARS-CoV-2 is one of the most destructive occurrences in history. Despite the availability of several effective vaccinations and their widespread use, this line of immunization often faces questions about its long-term efficacy. Since coronaviruses rapidly change, and multiple SARS-CoV-2 variants have emerged around the world. Therefore, finding a new target-based medication became a priority to prevent and control COVID-19 infections. The main protease (Mpro) is a salient enzyme in coronaviruses that plays a vital role in viral replication, making it a fascinating therapeutic target for SARS-CoV-2. We screened 0.2 million natural products against the Mpro of SARS-CoV-2 using the Universal Natural Product Database (UNPD). As well, we studied the role of ionic liquids (ILs) on the structural stabilization of Mpro. Cholinium-based ILs are biocompatible and used for a variety of biomedical applications. Molecular docking was employed for the initial screening of natural products and ILs against Mpro. To predict the drug-likeness features of lead compounds, we calculated the ADMET properties. We performed MD simulations for the selected complexes based on the docking outcomes. Using MM/PBSA approaches, we conclude that compounds NP-Hit2 (-25.6 kcal mol-1) and NP-Hit3 (-25.3 kcal mol-1) show stronger binding affinity with Mpro. The hotspot residues of Thr25, Leu27, His41, Met49, Cys145, Met165, and Gln189 strongly interacted with the natural compounds. Furthermore, naproxenate, ketoprofenate, and geranate, cholinium-based ILs strongly interact with Mpro and these ILs have antimicrobial properties. Our findings will aid in the development of effective Mpro inhibitors.

Carbon dioxide adsorption and activation on ionic liquid decorated Au(111) surface: A DFT study.

We use first principle approaches to study the adsorption and catalytic activation mechanism of CO2 on ionic liquids (ILs, [CnMIm]+[Cl]- (n = 0-6)) attached to a Au(111) surface. The adsorption of CO2 at this liquid-solid model interface occurs via either (i) parallel π-stacking mode or (ii) CO2 oxygen lone pair (lp)···π interaction. These CO2 physisorption modes, which depend on the CO2 landing angle at this interface, are identified as an efficient way to activate CO2 and its further conversion into value-added products. For illustration, we discuss the conversion of CO2 into formic acid where the ILs@Au(111) decorated interface allows reduction of the activation energy for the CO2 + H2 → HCOOH reaction. In sum, our electrode/electrolyte based interface model provides valuable information to design novel heterogeneous catalysts for CO2 conversion. Indeed, our work establishes that a suitable interface material is enough to activate CO2.

The molecular mechanism behind the stabilization of insulin by choline and geranate (CAGE) ionic liquids - computational insights into oral insulin drug formulation.

Insulin is a principal hormone that is involved in the regulation of glucose levels in the blood. Oral insulin formulation is a recent development in drug delivery systems. Biocompatible choline-based ionic liquids (ILs) show promising antibacterial activity and are useful for oral and transdermal drug delivery applications. Choline and geranate (CAGE) ILs enhance the stability and oral efficacy of insulin delivery. The molecular mechanism behind insulin formulation in the oral form is at issue. In the present work, the molecular-level understanding of CAGE ILs in insulin is scrutinized by employing atomistic molecular dynamics (MD) simulations. To identify the stability of insulin in an IL medium, we have studied a series of concentration (mole fraction 0.05-1.00) of CAGE ILs with an insulin dimer. It can be well evidenced from the experimental reports that in an aqueous medium, there is a refashioning of CAGE nanostructures at 0.50 mole fraction. It is found from our calculations that the first solvation shell of insulin is readily occupied by choline and geranate ions in the presence of water. Moreover, the geranate ions strongly interacted with the water molecules and thereby, eliminating the intermolecular hydrogen bonding (H-bonding) interactions towards the insulin at 0.30-0.50 mole fraction of CAGE ILs. The most desirable 0.30-0.50 mole fraction of CAGE invigorates water-mediated H-bonding interactions with geranate ions, which also enhances the electrostatic behavior around the vicinity of the insulin dimer. These important findings can help in the development of oral insulin drug delivery and related applications.

Novel SeS2-loaded Co MOF with Au@PANI comprised electroanalytical molecularly imprinted polymer-based disposable sensor for patulin mycotoxin.

An SeS2-loaded Co MOF and Au@PANI nanocomposite comprising the base matrix of the electrode was developed with electropolymerized molecularly imprinted polymer (MIP) consisting of p-aminobenzoic acid (PABA) and patulin (PT) to detect PT molecules based on the PT imprinted cavities. SeS2@Co MOF and Au@PANI were synthesized using hydrothermal synthesis and interfacial polymerization strategies, respectively. A suitable functional monomer to fabricate the MIP platform was selected using the density functional theory (DFT/M06-2X method). Higher electrochemical active surface area (0.985 cm2 which is 6.99 times higher than the bare SPE) and a lower charge transfer resistance (Rct = 27.8 Ω) at the MIP/Au@PANI/SeS2@Co MOF electrode was achieved based on the higher number of adsorptive sites and enhanced conductivity (electron transfer rate constant (ks = 3.24 × 10-3 s-1) of the sensing platform. The fabricated MIP sensor performance was studied in 10 mM PBS (pH = 6.4), where an improved detection limit (0.66 pM) for PT and a broad logarithmic linear dynamic range (0.001-100 nM) were both observed. The sensor possessed higher selectivity (Imprinting factor = 15.4 for PT), excellent reusability (%RSD of 10 cycles = 2.49%), high storage stability (6.7% lost after 35 days), and robust reproducibility (%RSD = 3.22%) The as-prepared MIP-based PT sensor was applied to detect PT in a real-time apple juice sample (10% diluted with PBS) with a recovery % ranging from 94.5 to 106.4%. The proposed sensor possesses great advantages in terms of cost-effectiveness, providing a simple detection strategy for long-term storage stability, and reversible cycle measurements.

Isostructural cocrystals of metaxalone with improved dissolution characteristics.

Muscle relaxant and pain reliever metaxalone (MET) is a biopharmaceutical classification systems (BCS) class II drug with poor aqueous solubility and high permeability. The presence of an aromatic skeleton and cyclic carboxamate moiety are the probable reasons for the decreased aqueous solubility, which impacts on its low bioavailability. A high dose (800 mg) of the drug often creates adverse side effects on the central nervous system that needs urgent remedy. Cocrystallization of MET with nicotinamide (NAM), salicylamide (SAM), and 4-hydroxybenzoic acid (HBA) resulted in multicomponent solids that were characterized by PXRD, DSC and single crystal X-ray diffraction. Cocrystals with SAM and NAM form 2D isostructural cocrystals, whereas with HBA the result is a differently packed cocrystal hydrate (or anisole hemisolvate) depending upon the crystallization medium. Similar to the reported MET cocrystals, these cocrystals also confirm the preference for an imide⋯imide homosynthon in the drug. The dominance of the drug-drug homodimer over drug-coformer heterodimers was demonstrated based on binding energy calculations. Further, powder dissolution experiments in pH 6.8 phosphate buffer indicate that the cocrystals improved the apparent solubility compared to the native drug by 3-9 fold. The absence of stronger heterosynthons between MET and the coformers, their lower melting points and the high solubility of the coformers are the probable reasons for the enhanced solubility of the bioactive component. The MET-NAM cocrystal exhibited the highest solubility/dissolution rate among the three binary solid forms, which may offer improved bioavailability and a lower dose with minimal side effects.

Sodium ion intercalation and multi redox behavior of a Keggin type polyoxometalate during [PMo10V2O40]5- to [PMo10V2O40]27- as a cathode material for Na-ion rechargeable batteries.

Recently, the development of cathode materials for Na-ion batteries has gained much attention due to the abundance, low cost, and easy availability of resources. Apart from the usual metal oxides, multi-electron redox materials grabbed attention due to their high energy density and practical capacity with long cycle life. Polyoxometalates (POMs) are inorganic clusters of higher valent metals, and act as electron sponges with multi-electron redox properties. Herein we report a Keggin-type polyoxometalate [PMo10V2O40]5- with Na+ and H+ counter cations as a cathode material for Na-ion batteries. Further the formation of POM is evidenced by PXRD, FT-IR, flame photometry and XPS studies. In Na-POM, Na+ ions in the intercluster cavities provide a better pathway and easy diffusion during the charge/discharge process, and contribute to better electrochemical properties than H-POM. The DFT studies further explore the detailed mechanistic pathway of Na+ ions around the clusters in the normal and super-reduced states. Na-POM enables better cycling stability and capacity retention with a specific discharge capacity of 123 mA h g-1 at 0.1C rate at room temperature.

The first microsolvation step for furans: New experiments and benchmarking strategies.

The site-specific first microsolvation step of furan and some of its derivatives with methanol is explored to benchmark the ability of quantum-chemical methods to describe the structure, energetics, and vibrational spectrum at low temperature. Infrared and microwave spectra in supersonic jet expansions are used to quantify the docking preference and some relevant quantum states of the model complexes. Microwave spectroscopy strictly rules out in-plane docking of methanol as opposed to the top coordination of the aromatic ring. Contrasting comparison strategies, which emphasize either the experimental or the theoretical input, are explored. Within the harmonic approximation, only a few composite computational approaches are able to achieve a satisfactory performance. Deuteration experiments suggest that the harmonic treatment itself is largely justified for the zero-point energy, likely and by design due to the systematic cancellation of important anharmonic contributions between the docking variants. Therefore, discrepancies between experiment and theory for the isomer abundance are tentatively assigned to electronic structure deficiencies, but uncertainties remain on the nuclear dynamics side. Attempts to include anharmonic contributions indicate that for systems of this size, a uniform treatment of anharmonicity with systematically improved performance is not yet in sight.

Twisted Eigen Can Induce Proton Transfer at a Hydrophobic-Hydrophilic Interface.

The investigation of proton localization at a hydrophobic-hydrophilic interface is an important problem in chemical and materials sciences. In this study, protonated benzene (i.e., benzenium ion) and water clusters [BZH+Wn (where n = 1-6)] are selected as prototype models to understand the interfacial interactions and proton transfer mechanism between a carbonaceous surface and water molecules. The excess protons can localize in the vicinity of the hydrophobic-hydrophilic interface, and these clusters are stabilized by various kinds of noncovalent interactions. Calculations are carried out using ab initio (MP2) and density functional theory B3LYP methods to shed more light on geometries, energetics, and spectral signatures of the protonated species [H+(H2O)n] at the interfaces. These calculations revealed few low-lying isomers, which have not been reported earlier. Scrutiny of the results reveals that proton localization in the hydrophilic environment is more stable than the hydrophobic benzene π-cloud. Furthermore, the occurrence of an O-H+···π hydrogen bond significantly influences the O-H+···O interactions in the water clusters and also intensively affects the vibrational modes of the Eigen cation. Thus, the aromatic π-clouds can stabilize the Eigen cation and at the same time, a twisted form of Eigen (one O-H+···π → two O-H+···π) can enhance the proton transfer through the water chain via a Grotthuss-type mechanism. The vibrational spectra of these clusters reveal that there is a large red-shifted frequency for the O-H+···O, O-H+···π, and O-H···π modes of interaction. The energetic values and vibrational frequencies obtained from the B3LYP method are in close agreement with the MP2 level and experimental values, respectively.

Selection of a suitable ZIF-8/ionic liquid (IL) based composite for selective CO2 capture: the role of anions at the interface.

The effective capture of CO2 from the atmosphere is much needed to reduce its environmental impact. The design and development of CO2 capturing materials is getting much attention. A zeolitic imidazolate framework (ZIF) can replace many of the conventional materials in gas separation due to its stability and high performance. Here, we analyzed the effect of encapsulation of ionic liquids (ILs) into the pores of ZIF-8 for selective CO2 capture and separation. The [BMIM]+ cation with a series of anions was selected to study suitable carbon capture materials using density functional theory (DFT) approaches. Our calculations suggest that the nitrogen containing anions are not well adsorbed on the ZIF-8 surface but their gas separation performance is not affected by these interfacial interactions. This is confirmed from the CO2/N2 and CO2/CH4 selectivity of these composites, calculated using grand canonical Monte Carlo (GCMC) simulations. A suitable force field for the composites was identified by comparing the available force fields with the experiments. The IL@ZIF-8 composite shows better CO2 selectivity compared to pristine ZIF-8. Fluorinated hydrophobic anions (such as [BF4]-, [PF6]- and [Tf2N]-) in the composites show better CO2 adsorption and significant CO2 selectivity than pristine ZIF-8, especially at low pressure. The nature of the anion plays an important role in CO2 separation, rather than its stability at the pores of ZIF-8. Close scrutiny of the results reveal that the CO2 selectivity of these composite materials depends on the anion of the IL and thus through the selection of a suitable anion we can significantly enhance the CO2 selectivity for different flue gas mixtures. Our molecular level design shows that the selection of suitable anions in IL based composites is very important in identifying potential carbon capture materials for industrial applications.

Multicomponent solid forms of the uric acid reabsorption inhibitor lesinurad and cocrystal polymorphs with urea: DFT simulation and solubility study.

Lesinurad (systematic name: 2-{[5-bromo-4-(4-cyclopropylnaphthalen-1-yl)-4H-1,2,4-triazol-3-yl]sulfanyl}acetic acid, C17H14BrN3O2S) is a selective uric acid reabsorption inhibitor related to gout, which exhibits poor aqueous solubility. High-throughput solid-form screening was performed to screen for new solid forms with improved pharmaceutically relevant properties. During polymorph screening, we obtained two solvates with methanol (CH3OH) and ethanol (C2H5OH). Binary systems with caffeine (systematic name: 3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione, C8H10N4O2) and nicotinamide (C6H6N2O), polymorphs with urea (CH4N2O) and eutectics with similar drugs, like allopurinol and febuxostat, were prepared using the crystal engineering approach. All these novel solid forms were confirmed by XRD, DSC and FT-IR. The crystal structures were solved by single-crystal and powder X-ray diffraction. The crystal structures indicate that the lesinurad molecule is highly flexible and the triazole moiety, along with the rotatable thioacetic acid (side chain) and cyclopropane ring, is almost perpendicular to the planar naphthalene moiety. The carboxylic acid-triazole heterosynthon in the drug is interrupted by the presence of methanol and ethanol molecules in their crystal structures and forms intermolecular macrocyclic rings. The caffeine cocrystal maintains the consistency of the acid-triazole heterosynthons as in the drug and, in addition, they are bound by several auxiliary interactions. In the binary system of nicotinamide and urea, the acid-triazole heterosynthon is replaced by an acid-amide synthon. Among the urea cocrystal polymorphs, Form I (P-1, 1:1) consists of an acid-amide (urea) heterodimer, whereas in Form II (P21/c, 2:2), both acid-amide heterosynthons and urea-urea dimers co-exist. Density functional theory (DFT) calculations further support the experimentally observed synthon hierarchies in the cocrystals. Aqueous solubility experiments of lesinurad and its binary solids in pH 5 acetate buffer medium indicate the apparent solubility order lesinurad-urea Form I (43-fold) > lesinurad-caffeine (20-fold) > lesinurad-allopurinol (12-fold) ≃ lesinurad-nicotinamide (11-fold) > lesinurad, and this order is correlated with the crystal structures.

Theoretical Insights into the Role of Water Molecules in the Guanidinium-Based Protein Denaturation Process in Specific to Aromatic Amino Acids.

Noncovalent interactions between the guanidinium cation (Gdm+) and aromatic amino acids (AAs) in the water molecules have been studied using quantum chemical calculation and molecular dynamics (MD) simulations. Our studies show that there are two different modes of interactions between Gdm+ and AAs with and without water molecules. It is observed that nonhydrated Gdm+ interacts with AAs through N-H···π interactions, whereas hydrated clusters of Gdm+ are stabilized by stacking interactions with the help of the water-mediated hydrogen bond. Thus, different hydration patterns have significant effects on the predominant cation···π interactions in AAs-Gdm+ complexes. Findings from MD simulation elicit that the interaction pattern of Gdm+ with AAs varies as Phe < Tyr < Trp. Both the QM and MD calculations show a similar trend in the interaction of AAs with Gdm+. Moreover, the interaction of AAs with Gdm+ depends on the spatial orientation of AAs in the protein and the concomitant local structure, that is, the AAs present in the unstructured region of protein such as coils and bends exhibit higher binding for Gdm+ when compared to the AAs present in the structured region of the protein such as the α-helix and the ß-sheet. Our study clearly reveals that H-bonded water molecules and the hydration pattern of Gdm+ as well as the positional presence of these AAs in the protein structure context play determining roles in the denaturation of protein by the Gdm+ cation.