Effect of guar gum-chitosan composites edible coating functionalized with essential oils on the postharvest shelf life of Khasi mandarin at ambient condition.

In the present study, the effects of guar gum (0.7 %):chitosan (0.3 %) based composite edible coating functionalized with coconut oil and essential oils like clove bud oil and cinnamon bark oil were investigated on the postharvest shelf life of Khasi mandarins at ambient conditions (25 ± 5 °C, RH 75 ± 5 %) up to 20 days of storage period. The postharvest characteristics such as weight loss, firmness, acidity, total soluble solids (TSS) and reducing sugar of control and treated fruits were evaluated at 5 days intervals throughout the storage period. The obtained results indicated that the application of guar gum/chitosan-based composite edible coating with coconut oil, clove bud and cinnamon bark essential oil was effective in prolonging the postharvest shelf life of Khasi mandarins as compared to control fruits by minimizing the decay and loss of postharvest quality attributes. The treatment of composite such as guar gum/chitosan/coconut oil/clove oil/cinnamon oil (GGCsC-Cl-Cn) was most effective in maintaining postharvest characteristics of fruits compared to other treatments and control. The significant (p < 0.05) lowest weight loss (38 %) with retention of higher firmness (5.9 N), titratable acidity (0.29 %), and total soluble solid (10.8 %) was noticed in the Khasi mandarins treated with GGCsC-Cl-Cn composite coating on 20 days of storage. Furthermore, the present study confirmed the significance of the developed composite formulation in improving the shelf life of Khasi mandarin.

Polylactic acid/polycaprolactone/sawdust based biocomposites trays with enhanced compostability.

The major drawback associated with petroleum-based polymer products is pollution, leading to environmental hazards. Biodegradable polymers and biocomposites have the potential to play a major role in replacing the conventional polymers in specific applications on a case to case basis. In the current study, sawdust reinforced polylactic acid/polycaprolactone (PLA/PCL) biocomposites were developed using the melt extrusion technique. Primary processed fine sawdust was reinforced with PLA/PCL blend in a mini twin screw extruder in different weight fractions (10 %, 20 %, 30 %, and 40 %). The developed biocomposites were subjected to tensile testing, which indicated that the increased weight percent of sawdust reduced the tensile strength. The materials were further characterized, using sophisticated analytical such as field emission scanning electron microscopy, differential scanning calorimetry and thermogravimetry analysis. The composite containing 30 % sawdust concentration presented the best results with tensile strength of 26.5 MPa, tensile strain of 4.4 % and onset degradation temperature of 320 °C. The same formulation was successfully scaled up to the pilot level of 5 kg batch. It was further subjected to secondary processing to produce market ready cutlery items. Biodegradability studies in simulated composting environments revealed that addition of sawdust drastically reduces the lag phase in degradation and total degradation may be obtained in approximately 90 days. Based on the investigation, there is optimism that the PLA/PCL composites, blended with sawdust may ensure commercial application of sustainable polymer blends at affordable prices.

Reduction of pollutant emissions from a heat treatment furnace.

This paper addresses a preliminary study on the emission control of pollutants from an industrial furnace. The stack sampling technique was implemented in this study, and the quantity of pollutants released from the furnace smoke was monitored. The transverse points required to collect the data were selected based on the upstream and downstream disturbances. At first, the investigation was made with the furnace oil. A 15.28% and 5.1% of CO2 and O2 were observed in the flue gas from of regular furnace oil. Hence, by considering the emission level observed, the analysis was repeated with the low sulphur-low stack and the coal tar fuel. The emission of SO2 and N2 was reduced with coal-tar fuel compared with the regular furnace fuel. Thus, the proposed operational adjustment attenuates the pollutant emission, which also helps to reduce the unfavorable impact on the environment. In the future, the authors intend to include a design change in the furnace burner, which would help to increase fuel efficiency and reduce pollution.