Tailoring the Weight of Surface and Intralayer Edge States to Control LUMO Energies.

The energies of the frontier molecular orbitals determine the optoelectronic properties in organic films, which are crucial for their application, and strongly depend on the morphology and supramolecular structure. The impact of the latter two properties on the electronic energy levels relies primarily on nearest-neighbor interactions, which are difficult to study due to their nanoscale nature and heterogeneity. Here, an automated method is presented for fabricating thin films with a tailored ratio of surface to bulk sites and a controlled extension of domain edges, both of which are used to control nearest-neighbor interactions. This method uses a Langmuir-Schaefer-type rolling transfer of Langmuir layers (rtLL) to minimize flow during the deposition of rigid Langmuir layers composed of π-conjugated molecules. Using UV-vis absorption spectroscopy, atomic force microscopy, and transmission electron microscopy, it is shown that the rtLL method advances the deposition of multi-Langmuir layers and enables the production of films with defined morphology. The variation in nearest-neighbor interactions is thus achieved and the resulting systematically tuned lowest unoccupied molecular orbital (LUMO) energies (determined via square-wave voltammetry) enable the establishment of a model that functionally relates the LUMO energies to a morphological descriptor, allowing for the prediction of the range of accessible LUMO energies.

Combining nitric oxide and calcium sensing for the detection of endothelial dysfunction.

Cardiovascular diseases are the leading cause of death worldwide and are not typically diagnosed until the disease has manifested. Endothelial dysfunction is an early, reversible precursor in the irreversible development of cardiovascular diseases and is characterized by a decrease in nitric oxide production. We believe that more reliable and reproducible methods are necessary for the detection of endothelial dysfunction. Both nitric oxide and calcium play important roles in the endothelial function. Here we review different types of molecular sensors used in biological settings. Next, we review the current nitric oxide and calcium sensors available. Finally, we review methods for using both sensors for the detection of endothelial dysfunction.

Supramolecular Control of Photonic Response and Sensing of Nitricoxide using Iron(III) Corrole Monolayers and Their Stacks.

In this work, we assemble amphiphilic iron(III) corroles at air-water interfaces into well-defined quasi-two-dimensional molecular monolayers and theirs stacks for sensing of nitric oxide (NO). For this purpose, we use the Langmuir-Blodgett (LB) technique, which allows varying the packing density of iron(III) corroles anchored to the aqueous subphase via one molecular side. The stacks of ten down to three molecular monolayers on the front and back sides of the substrates are sufficiently optically dense to detect NO binding to the layers photometrically. This sensing with few layers demonstrates the potential for electronic detection, where very thin surface functionalizations enable efficient electronic communication between the layer and the (semi)conductor. Despite increasing optical densities, the spectral responses to NO exposure become smaller with increasing packing density until the collapse point of the monolayers is reached. This demonstrates that the highest molecular efficiency for binding and detection of NO is achieved at the smallest packing densities. This finding is relevant to all molecular sensor films with axial binding of analytes to the sensor molecules and demonstrates the advantage of sensor molecule assembly into monolayers on water-air interfaces using the LB technique.

Bifacial Dye Membranes: Ultrathin and Free-Standing although not Being Covalently Bound.

Layers of aligned dyes are key to photo-driven charge separation in dye sensitized solar cells, but cannot be exploited as rectifying membranes in photocatalysis to separate half-cells because they are not sufficiently stable. While impressive work on the fabrication of stable noncovalent membranes has been recently demonstrated, these membranes are inherently suffering from non-uniform orientation of the constituting dyes. To stabilize layers made from uniformly assembled and aligned dyes, they can be covalently cross-linked via functional groups or via chromophores at the expense of their optical properties. Here stable membranes from established dyes are reported that do not need to be elaborately functionalized nor do their chromophores need to be destroyed. These membranes are free-standing, although being only non-covalently linked. To enable uniform dye-alignment, Langmuir layers made from linear, water-insoluble dyes are used. That water-soluble charge transfer dyes adsorb onto and intercalate into the Langmuir layer from the aqueous subphase, thus yielding free-standing, molecularly thin membranes are demonstrated. The developed bifacial layers consist almost entirely of π-conjugated units and thus can conduct charges and can be further engineered for optoelectronic and photocatalytic applications.

Embedding an Amphiphilic 4-Hydroxy Thiazole Dye in Langmuir Matrices: Studying Miscibilities with Arylic and Alkylic Matrix Amphiphiles via Langmuir Isotherms and Photo-induced Force Microscopy.

We present here a fundamental study on the miscibility between a prototype amphiphilic dye and alkylic and arylic Langmuir monolayers. Embedding dyes in such matrices is crucial for utilizing dyes in any photo-energy conversion process if the involved dyes form aggregates that provide thermal deactivation channels. Because miscibility in Langmuir matrices depends on the blending ratio between the dye and matrix and on the Langmuir film density, as characterized via the surface pressure and the mean molecular area, we employ Langmuir miscibility studies to identify ideal miscibility parameters for each matrix. Atomic force microscopy (AFM) results support miscibility between the dye and both matrix materials at low surface pressures, where smooth and homogeneous films are obtained. AFM and photo-induced force microscopy (PiFM) reveal phase separation if the Langmuir monolayers are deposited at surface pressures above 8 mN/m at which reorientation of the chromophores has been reported. The nanoscale chemical fingerprint mapping enabled by PiFM enables assigning segregated spots to small stearic acid (SA)-enriched domains that have not been detected via AFM, thus demonstrating the value of the IR-spectroscopic contrast provided by PiFM. In this work, we have presented a so far unexploited matrix material (terphenylene carboxylic acid; TPCA) and found it equally suitable for embedding dyes as the standard amphiphile SA. In contrast to SA, TPCA is composed of rigid and electrically conducting π-electron systems, hence, being predestined for aligning dyes in Langmuir matrices and for application in optoelectronic systems.

Supramolecular Reorientation During Deposition Onto Metal Surfaces of Quasi-Two-Dimensional Langmuir Monolayers Composed of Bifunctional Amphiphilic, Twisted Perylenes.

Supramolecular dye structures, which are often ruled by π-π interactions between planar chromophores, crucially determine the optoelectronic properties of layers and interfaces. Here, we present the interfacial assembly of perylene monoanhydride and monoimide that do not feature a planar chromophore but contain chlorine substituents in the bay positions to yield twisted chromophores and hence modified π-stacking. The assembly of the twisted perylene monoanhydride and monoimide is driven by their amphiphilicity that ensures proper Langmuir layer formation. The shielding of the hydrophilic segment upon attaching an alkyl chain to the imide moiety yielded a more rigid Langmuir layer, even though the degrees of freedom were increased due to this modification. For the characterization of the Langmuir layer's supramolecular structure, the layers were deposited onto glass, silver, and gold substrates via Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) techniques and were investigated with atomic force microscopy and surface-enhanced resonance Raman spectroscopy (SERRS). From the similarity between all SERR spectra of the LS and LB layers, we concluded that the perylenes have changed their orientation upon LB deposition to bind to the silver surface of the SERRS substrate via sulfur atoms. In the Langmuir layer, the perylenes, which are π-stacked with half of the twisted chromophores, must already be inclined and cannot achieve full parallel alignment because of the twisting-induced steric hindrance. However, upon rotation, the energetically most favorable antiparallel aligned structures can be formed and bind to the SERRS substrate. Thus, we present, to the best of our knowledge, the first fabrication of quasi-two-dimensional films from twisted amphiphilic perylene monoimides and their reassembly during LB deposition. The relation between the molecular structure, supramolecular interfacial assembly, and its adoption during adsorption revealed here is crucial for the fabrication of defined functionalizations of metal surfaces, which is key to the development of organic (opto)electronic devices.

Langmuir-Blodgett Films of Diketopyrrolopyrroles with Tunable Amphiphilicity.

In this work, we present the formation of H- and J-aggregates of amphiphilic centrosymmetric diketopyrrolopyrroles containing aliphatic or aromatic amino groups. The inherent amphiphilicity of these dyes predestines their assembly at interfaces to form ordered supramolecular structures. In this work, we employed the Langmuir-Blodgett (LB) technique to generate, manipulate, and deposit such supramolecular structures. The aforementioned amines provide an additional means to control the formation of the supramolecular assemblies. In the resulting LB films, both H- and J-aggregates of the dyes can be realized, leading to very broad absorption spectra. In contrast to many reports on H- and J-aggregates, the interactions between the symmetric diketopyrrolopyrroles are controlled via interface assembly and π-stacking and not by dipolar interactions. We show that in the case of the aliphatic, but not for the aromatic amine functionalization, the usage of an acidic subphase enables the transition from H- to J-aggregate-dominated LB films via an increase in the surface pressure during deposition.

In situ photothermal deflection spectroscopy revealing intermolecular interactions upon self-assembly of dye monolayers.

We demonstrate the potential of photothermal deflection spectroscopy (PDS) to study the self-assembly of dye monolayers in situ. Beyond the determination of adsorption kinetics at specific wavelengths, PDS gains its strength from yielding UV-vis absorptance spectra of SAMs in situ, unaffected by scattering, from which supramolecular interactions can be deduced.

Macroscopic quantum electrodynamics and density functional theory approaches to dispersion interactions between fullerenes.

The processing and material properties of commercial organic semiconductors, for e.g. fullerenes is largely controlled by their precise arrangements, specially intermolecular symmetries, distances and orientations, more specifically, molecular polarisabilities. These supramolecular parameters heavily influence their electronic structure, thereby determining molecular photophysics and therefore dictating their usability as n-type semiconductors. In this article we evaluate van der Waals potentials of a fullerene dimer model system using two approaches: (a) Density Functional Theory and, (b) Macroscopic Quantum Electrodynamics, which is particularly suited for describing long-range van der Waals interactions. Essentially, we determine and explain the model symmetry, distance and rotational dependencies on binding energies and spectral changes. The resultant spectral tuning is compared using both methods showing correspondence within the constraints placed by the different model assumptions. We envision that the application of macroscopic methods and structure/property relationships laid forward in this article will find use in fundamental supramolecular electronics.

Self-Assembled Graphene/MWCNT Bilayers as Platinum-Free Counter Electrode in Dye-Sensitized Solar Cells.

We describe the preparation and properties of bilayers of graphene- and multi-walled carbon nanotubes (MWCNTs) as an alternative to conventionally used platinum-based counter electrode for dye-sensitized solar cells (DSSC). The counter electrodes were prepared by a simple and easy-to-implement double self-assembly process. The preparation allows for controlling the surface roughness of electrode in a layer-by-layer deposition. Annealing under N2 atmosphere improves the electrode's conductivity and the catalytic activity of graphene and MWCNTs to reduce the I3- species within the electrolyte of the DSSC. The performance of different counter-electrodes is compared for ZnO photoanode-based DSSCs. Bilayer electrodes show higher power conversion efficiencies than monolayer graphene electrodes or monolayer MWCNTs electrodes. The bilayer graphene (bottom)/MWCNTs (top) counter electrode-based DSSC exhibits a maximum power conversion efficiency of 4.1 % exceeding the efficiency of a reference DSSC with a thin film platinum counter electrode (efficiency of 3.4 %). In addition, the double self-assembled counter electrodes are mechanically stable, which enables their recycling for DSSCs fabrication without significant loss of the solar cell performance.

On combining the conductor-like screening model and optimally tuned range-separated hybrid density functionals.

Range-separated hybrid functionals whose range-separation parameter γ has been nonempirically tuned to a particular molecule have been shown to yield frontier orbital energies and other properties in very good agreement with experiments. However, many cases, such as organic optoelectronic devices, require the description of molecules embedded in an environment. This can be done by combining the γ-tuning procedure with polarizable continuum models in general and the very versatile conductor-like screening model in particular. There are at least two different ways of performing this combination. The partially vertical γ-tuning employs equilibrium solvation throughout. The strictly vertical γ-tuning, on the other hand, employs nonequilibrium solvation to obtain ionization energies. In this article, we compare ground-state and excited-state properties of several different molecules relevant to organic optoelectronics that were obtained using both of the two different tuning procedures. While there are significant differences in the ground-state properties, we see virtually no difference in the excited-state properties. Given these results, we conclude that both tuning procedures have to be used in conjunction for the correct description of both ground-state and excited-state properties.

Autonomous Supramolecular Interface Self-Healing Monitored by Restoration of UV/Vis Absorption Spectra of Self-Assembled Thiazole Layers.

Longevity of complex organic devices critically depends on the supramolecular integrity of the constituting layers and interfaces. Because the latter are soft matter, they can structurally respond to perturbation of their supramolecular structure by relaxing back to a thermodynamically favorable state. To use this response for self-healing of optoelectronically active layers and particularly interfaces, the degraded dyes in these layers need to be exchanged with non-degraded ones. Here, we present a dye layer interfaced between a solid surface and a dye reservoir that autonomously self-heals after photo-degradation of single molecules to restore its optical function. Surface sensitive in situ photothermal deflection spectroscopy reveals that this supramolecular self-healing approach critically depends on the thermodynamic stability of the layer, the chemical change of the dye upon degradation, and the medium dissolving the degraded dye and providing the reservoir dyes. Hence, the interplay of these parameters is key to successfully using this supramolecular self-healing approach to thin layers and interfaces in organic device for increased sustainability of organic optoelectronics and related fields.

Assembly of T-Shaped Amphiphilic Thiazoles on the Air-Water Interface: Impact of Polar Chromophore Moieties, as Well as Dipolarity and π-Extension of the Chromophore on the Supramolecular Structure.

The supramolecular structure essentially determines the properties of organic thin films. In this work, we systematically investigate the influence of the chromophore on the supramolecular structure formation at air-water interfaces by means of the Langmuir-Blodgett technique. Therefore, we focus on the recently introduced class of double-anchor T-shaped amphiphilic dyes, namely, 4-hydroxy-thiazole chromophores that are centrally equipped with an amphiphilicity-inducing hexanoic acid. The thiazoles contain hydrophilic subphase-anchor groups in the 2-position (4- N, N-dimethylaminophenyl (Am), 2-pyridyl (Py), and 4-nitrophenyl (Ni)), whereas the chromophores are systematically extended in the 5-position with various substituents. The combination of the Langmuir technique with online fluorescence measurements revealed that the π-π interactions that are pronounced in the case of 4-methoxybiphenyl derivatives yield the most distinct supramolecular structures. Whereas in the case of Py and Ni derivatives ordered J-type supramolecular structures in microdomains are formed, the Am derivative forms ordered supramolecular structures that are more homogeneous, which are, however, not stabilized by J-type dipolar interactions. Because of the synergetic π-π and dipolar stabilizations, the Ni derivative bearing the 4-methoxybiphenyl unit forms exceptionally stable quasi-two-dimensional Langmuir monolayers reaching very high surface pressures beyond 60 mN/m without any sign of disturbance of the Langmuir monolayer.

Ab Initio Prediction of Fluorescence Lifetimes Involving Solvent Environments by Means of COSMO and Vibrational Broadening.

The fluorescence lifetime is a key property of fluorophores that can be utilized for microenvironment probing, analyte sensing, and multiplexing as well as barcoding applications. For the rational design of lifetime probes and barcodes, theoretical methods have been developed to enable the ab initio prediction of this parameter, which depends strongly on interactions with solvent molecules and other chemical species in the emitters immediate environment. In this work, we investigate how a conductor-like screening model (COSMO) can account for variations in fluorescence lifetimes that are caused by such fluorophore-solvent interactions. Therefore, we calculate vibrationally broadened fluorescence spectra using the nuclear ensemble method to obtain distorted molecular geometries to sample the electronic transitions with time-dependent density functional theory (TDDFT). The influence of the solvent on fluorescence lifetimes is accounted for with COSMO. For example, for 4-hydroxythiazole fluorophore containing different heteroatoms and acidic and basic moieties in aprotic and protic solvents of varying polarity, this approach was compared to experimentally determined lifetimes in the same solvents. Our results demonstrate a good correlation between theoretically predicted and experimentally measured fluorescence lifetimes except for the polar solvents ethanol and acetonitrile that can specifically interact with the heteroatoms and the carboxylic acid of the thiazole derivative.

Photoannealing of Merocyanine Aggregates.

In this work we elucidate the fundamental difference between aggregate formation of donor-π-acceptor merocyanines in their electronic ground and excited states. While increasing the π-bridge size favors formation of π-stacked aggregates in the dark, irradiation with visible light causes reorientation of the dyes to form prototype H-aggregates with compensating dipole moments. This photoannealing changes the supramolecular structure and its UV-vis spectroscopic properties dramatically, thus being of importance for the function of active layers composed of these dyes. Aggregates of the ground state dyes are bound cooperatively through ππ-London dispersion interactions and hydrogen bonds between the polar α-cyano-carboxylic acid groups. However, charge transfer upon photoexcitation leads to repulsion of the polar acid groups. Electronic excitation of the dyes approximately doubles the ground state dipole moment, thus driving molecular reorientation into prototype H-aggregate structures. We show that this photoinduced supramolecular rearrangement can disrupt the large polymeric aggregates formed in the dark. The photoinduced supramolecular structural changes reported in this work will influence the performance of optoelectronic devices composed of these structures and must be controlled to avoid morphological decomposition of active layers upon operation.

A program for automatically predicting supramolecular aggregates and its application to urea and porphin.

Not only the molecular structure but also the presence or absence of aggregates determines many properties of organic materials. Theoretical investigation of such aggregates requires the prediction of a suitable set of diverse structures. Here, we present the open-source program EnergyScan for the unbiased prediction of geometrically diverse sets of small aggregates. Its bottom-up approach is complementary to existing ones by performing a detailed scan of an aggregate's potential energy surface, from which diverse local energy minima are selected. We crossvalidate this approach by predicting both literature-known and heretofore unreported geometries of the urea dimer. We also predict a diverse set of dimers of the less intensely studied case of porphin, which we investigate further using quantum chemistry. For several dimers, we find strong deviations from a reference absorption spectrum, which we explain using computed transition densities. This proof of principle clearly shows that EnergyScan successfully predicts aggregates exhibiting large structural and spectral diversity. © 2018 Wiley Periodicals, Inc.

On the Control of Chromophore Orientation, Supramolecular Structure, and Thermodynamic Stability of an Amphiphilic Pyridyl-Thiazol upon Lateral Compression and Spacer Length Variation.

The supramolecular structure essentially determines the properties of organic thin films. Therefore, it is of utmost importance to understand the influence of molecular structure modifications on supramolecular structure formation. In this article, we demonstrate how to tune molecular orientations of amphiphilic 4-hydroxy thiazole derivatives by means of the Langmuir-Blodgett (LB) technique and how this depends on the length of an alkylic spacer between the thiazole chromophore and the polar anchor group. Therefore, we characterize their corresponding supramolecular structures, thermodynamic, absorption, and fluorescence properties. Particularly, the polarization-dependence of the fluorescence is analyzed to deduce molecular orientations and their possible changes after annealing, i.e., to characterize the thermodynamic stability of the individual solid state phases. Because the investigated thiazoles are amphiphilic, the different solid state phases can be formed and be controlled by means of the Langmuir-Blodgett (LB) technique. This technique also allows to deduce atomistic supramolecular structure motives of the individual solid phases and to characterize their thermodynamic stabilities. Utilizing the LB technique, we demonstrate that subtle molecular changes, like the variation in spacer length, can yield entirely different solid state phases with distinct supramolecular structures and properties.

Absorption and Fluorescence Features of an Amphiphilic meso-Pyrimidinylcorrole: Experimental Study and Quantum Chemical Calculations.

Corroles are emerging as an important class of macrocycles with numerous applications because of their peculiar photophysical and metal chelating properties. meso-Pyrimidinylcorroles are easily deprotonated in certain solvents, which changes their absorption and emission spectra as well as their accessible supramolecular structures. To enable control over the formation of supramolecular structures, the dominant corrole species, i.e., the deprotonated form or one of the two NH-tautomers, needs to be identified. Therefore, we focus in the present article on the determination of the UV-vis spectroscopic properties of the free-base NH-tautomers and the deprotonated form of a new amphiphilic meso-pyrimidinylcorrole that can assemble to supramolecular structures at heterointerfaces as utilized in the Langmuir-Blodgett and liquid-liquid interface precipitation techniques. After quantification of the polarities of the free-base NH-tautomers and the deprotonated form by means of quantum chemically derived electrostatic potential distributions at the corroles' van der Waals surfaces, the preferential stabilization of (some of) the considered species in solvents of different polarity is identified by means of absorption spectroscopy. For the solutions with complex mixtures of species, we applied fluorescence excitation spectroscopy to estimate the relative weights of the individual corrole species. This technique might also be applied to identify dominating species in molecularly thin films directly on the subphase' surface of Langmuir-Blodgett troughs. Supported by quantum chemical calculations we were able to differentiate between the spectral signatures of the individual NH-tautomers by means of fluorescence excitation spectroscopy.

Controlling Electronic Transitions in Fullerene van der Waals Aggregates via Supramolecular Assembly.

Morphologies crucially determine the optoelectronic properties of organic semiconductors. Therefore, hierarchical and supramolecular approaches have been developed for targeted design of supramolecular ensembles of organic semiconducting molecules and performance improvement of, e.g., organic solar cells (OSCs), organic light emitting diodes (OLEDs), and organic field-effect transistors (OFETs). We demonstrate how the photonic properties of fullerenes change with the formation of van der Waals aggregates. We identified supramolecular structures with broadly tunable absorption in the visible spectral range and demonstrated how to form aggregates with targeted visible (vis) absorption. To control supramolecular structure formation, we functionalized the C60-backbone with polar (bis-polyethylene glycol malonate-MPEG) tails, thus yielding an amphiphilic fullerene derivative that self-assembles at interfaces. Aggregates of systematically tuned size were obtained from concentrating MPEGC60 in stearic acid matrices, while different supramolecular geometries were provoked via different thin film preparation methods, namely spin-casting and Langmuir-Blodgett (LB) deposition from an air-water interface. We demonstrated that differences in molecular orientation in LB films (C2v type point group aggregates) and spin-casting (stochastic aggregates) lead to huge changes in electronic absorption spectra due to symmetry and orientation reasons. These differences in the supramolecular structures, causing the different photonic properties of spin-cast and LB films, could be identified by means of quantum chemical calculations. Employing supramolecular assembly, we propounded that molecular symmetry in fullerene aggregates is extremely important in controlling vis absorption to harvest photons efficiently, when mixed with a donor molecule, thus improving active layer design and performance of OSCs.

Tuning the Morphology of Solution-Sheared P3HT:PCBM Films.

Organic bulk heterojunction (BHJ) solar cells are a promising alternative for future clean-energy applications. However, to become attractive for consumer applications, such as wearable, flexible, or semitransparent power-generating electronics, they need to be manufactured by high-throughput, low-cost, large-area-capable printing techniques. However, most research reported on BHJ solar cells is conducted using spin coating, a single batch fabrication method, thus limiting the reported results to the research lab. In this work, we investigate the morphology of solution-sheared films for BHJ solar cell applications, using the widely studied model blend P3HT:PCBM. Solution shearing is a coating technique that is upscalable to industrial manufacturing processes and has demonstrated to yield record performance organic field-effect transistors. Using grazing incident small-angle X-ray scattering, grazing incident wide-angle X-ray scattering, and UV-vis spectroscopy, we investigate the influence of solvent, film drying time, and substrate temperature on P3HT aggregation, conjugation length, crystallite orientation, and PCBM domain size. One important finding of this study is that, in contrast to spin-coated films, the P3HT molecular orientation can be controlled by the substrate chemistry, with PEDOT: PSS substrates yielding face-on orientation at the substrate-film interface, an orientation highly favorable for organic solar cells.