Heteronuclear Dirhodium-Gold Anionic Complexes: Polymeric Chains and Discrete Units.

In this article, we report on the synthesis and characterization of the tetracarboxylatodirhodium(II) complexes [Rh2(µ-O2CCH2OMe)4(THF)2] (1) and [Rh2(µ-O2CC6H4-p-CMe3)4(OH2)2] (2) by metathesis reaction of [Rh2(µ-O2CMe)4] with the corresponding ligand acting also as the reaction solvent. The reaction of the corresponding tetracarboxylato precursor, [Rh2(µ-O2CR)4], with PPh4[Au(CN)2] at room temperature, yielded the one-dimensional polymers (PPh4)n[Rh2(µ-O2CR)4Au(CN)2]n (R = Me (3), CH2OMe (4), CH2OEt (5)) and the non-polymeric compounds (PPh4)2{Rh2(µ-O2CR)4[Au(CN)2]2} (R = CMe3 (6), C6H4-p-CMe3 (7)). The structural characterization of 1, 3·2CH2Cl2, 4·3CH2Cl2, 5, 6, and 7·2OCMe2 is also provided with a detailed description of their crystal structures and intermolecular interactions. The polymeric compounds 3·2CH2Cl2, 4·3CH2Cl2, and 5 show wavy chains with Rh-Au-Rh and Rh-N-C angles in the ranges 177.18°-178.69° and 163.0°-170.4°, respectively. A comparative study with related rhodium-silver complexes previously reported indicates no significant influence of the gold or silver atoms in the solid-state arrangement of these kinds of complexes.

pH- and Time-Dependent Release of Phytohormones from Diruthenium Complexes.

The controlled release of functionally active compounds is important in a variety of applications. Here, we have synthesized, characterized, and studied the magnetic properties of three novel metal-metal-bonded tris(formamidinato) Ru25+ complexes. We have used different auxin-related hormones, indole-3-acetate (IAA), 2,4-dichlorophenoxyacetate (2,4-D), and 1-naphthaleneacetate (NAA), to generate [Ru2Cl(µ-DPhF)3(µ-IAA)] (RuIAA), [Ru2Cl(µ-DPhF)3(µ-2,4-D)] (Ru2,4-D), and [Ru2Cl(µ-DPhF)3(µ-NAA)] (RuNAA) (DPhF = N,N'-diphenylformamidinate). The crystal structures of RuIAA, RuIAA·THF, Ru2,4-D·CH2Cl2, and RuNAA·0.5THF have been determined by single-crystal X-ray diffraction. To assess the releasing capacity of the bound hormone, we have employed a biological assay that relied on Arabidopsis thaliana plants expressing an auxin reporter gene and we demonstrate that the release of the phytohormones from RuIAA, Ru2,4-D, and RuNAA is pH- and time-dependent. These studies serve as a proof of concept showing the potential of these types of compounds as biological molecule carriers.

Synthesis and Structural Characterization of a Series of One-Dimensional Heteronuclear Dirhodium-Silver Coordination Polymers.

Herein, we describe the preparation of heteronuclear dirhodium-silver complexes by reaction between molecular Rh(II)-Rh(II) compounds [Rh2(µ-O2CR)4L2] (R = Me, Ph (1), CH2OEt (2); L = solvent molecules) with paddlewheel structure and PPh4[Ag(CN)2]. One-dimensional coordination polymers of (PPh4)n[Rh2(µ-O2CR)4Ag(CN)2]n (R = Me (3), Ph (4), CH2OEt (5)) formula have been obtained by replacement of the two labile molecules in the axial positions of the paddlewheel structures by a [Ag(CN)2]- bridging unit. The crystal structures of 3⁻5 display a similar arrangement, having anionic chains with a wavy structure and bulky (PPh4)⁺ cations placed between the chains. The presence of the (PPh4)⁺ cations hinders the existence of intermolecular Ag-Ag interactions although several C-H····π interactions have been observed. A similar reaction between [Rh2(µ-O2CCMe3)4(HO2CCMe3)2] and PPh4[Ag(CN)2] led to the molecular compound (PPh4)2{Rh2(µ-O2CCMe3)4[Ag(CN)2]2} (6) by replacement of the axial HO2CCMe3 ligands by two [Ag(CN)2]- units. The trimethylacetate ligand increases the solubility of the complex during the crystallization favouring the formation of discrete heteronuclear species.

Tetracarbonatodiruthenium Fragments and Lanthanide(III) Ions as Building Blocks to Construct 2D Coordination Polymers.

Two-dimensional coordination polymers of [Pr(DMSO)2(OH2)3][Ru2(CO3)4(DMSO)(OH2)]·5H2O (Prα) and [Ln(OH2)5][Ru2(CO3)4(DMSO)]·xH2O (Ln = Sm (Smß), Gd (Gdß)) formulae have been obtained by reaction of the corresponding Ln(NO3)3·6H2O dissolved in dimethyl sulphoxide (DMSO) and K3[Ru2(CO3)4]·4H2O dissolved in water. Some DMSO molecules are coordinated to the metal atoms reducing the possibilities of connection between the [Ru2(CO3)4]3- and Ln3+ building blocks giving rise to the formation of two-dimensional networks. The size of the Ln3+ ion and the synthetic method seem to have an important influence in the type of two-dimensional structure obtained. Slow diffusion of the reagents gives rise to Prα that forms a 2D net that is built by Ln3+ ions as triconnected nodes and two types of Ru25+ units as bi- and tetraconnected nodes with (2-c)(3-c)2(4-c) stoichiometry (α structure). An analogous synthetic procedure gives Smß and Gdß that display a grid-like structure, (2-c)2(4-c)2, formed by biconnected Ln3+ ions and two types of tetraconnected Ru25+ fragments (ß structure). The magnetic properties of these compounds are basically explained as the sum of the individual contributions of diruthenium and lanthanide species, although canted ferrimagnetism or weak ferromagnetism are observed at low temperature.

Novel tetranuclear Ni(II) Schiff base complex containing Ni4O4 cubane core: synthesis, X-ray structure, spectra and magnetic properties.

Novel tetranuclear nickel(II) Schiff base complex having symmetric Ni4O4 cubane-core, [Ni4O2(OAc)2(L)2] (1) has been synthesized. Single crystal of the complex exhibits four nickel atoms in the alternate corner of the cubane and other four sites are occupied by phenolate-O and µ3-O(2-). Variable temperature magnetic moment data suggests the Ni centres are weakly antiferromagnetically coupled with J1=-4.82cm(-1) and J2=-4.83cm(-1). The electronic spectra, emission properties and life time measurement of ligand, HL and complex 1 have been studied.

Structural, magnetic and electrical properties of one-dimensional tetraamidatodiruthenium compounds.

The first bromo and iodo tetraamidatodiruthenium compounds of the type [Ru2X(µ-NHOCC6H4-R)4]n [X = Br, R = o-Me (1), m-Me (2), p-Me (3); X = I, R = o-Me (4), m-Me (5), p-Me (6)] have been prepared using solvothermal or microwave activation procedures. In these reactions ethanol or methanol as solvents have been used to make the synthesis procedures more environment-friendly. Solvothermal synthesis has allowed us to isolate single crystals of these extremely insoluble compounds and the crystal structures of all of them have been determined using single crystal X-ray diffraction. The change of the bridging halide ligand permits us to discuss the properties of these complexes on the basis of their structure. Complex 1 shows a Ru-Br-Ru angle of 180.0° whereas in complexes 2-6 the Ru-X-Ru angle varies from 110.16(2) to 115.39(4)°. In all compounds the ruthenium atom has a cis-RuN2O2 environment except in compound 1 that shows a positional disorder of N and O atoms. The bromide complex 1 shows a linear arrangement of the paddlewheel units in the resulting 1D coordination polymer. The fit of the magnetic data indicates that these compounds have non-negligible values of zero-field splitting with D values ranging from 41.10 to 60.10 cm(-1) and antiferromagnetic coupling constants from 0.00 to -4.13 cm(-1). Compound 1 is the first linear paddlewheel diruthenium compound that does not show a maximum in the representation of the magnetic susceptibility towards temperature. The electrical conductivity measurements in the temperature range 300-400 K of compounds 1, 4 and [Ru2Cl(µ-NHOCC6H4-o-Me)4]n (7) show that these compounds present semiconducting behaviours with conductivity values at 400 K in the range 0.3-3.0 × 10(-8) S cm(-1) for the Cl derivative (7), 7-18 × 10(-8) S cm(-1) for the Br derivative (1) and 27-68 × 10(-8) S cm(-1) for the I derivative (4) with average values of 1.4 × 10(-8), 13 × 10(-8) and 47 × 10(-8) S cm(-1), respectively.

Comparative study of different methods for the preparation of tetraamidato- and tetracarboxylatodiruthenium compounds. Structural and magnetic characterization.

Solvothermal and microwave assisted synthesis were used as green and very useful alternative methods to obtain new chloridotetraamidatodiruthenium compounds, [Ru(2)Cl(µ-NHOCR)(4)](n) [R = Me-o-C(6)H(4) (1), Me-m-C(6)H(4) (2), Me-p-C(6)H(4) (3)]. The analogous tetracarboxylato complexes [Ru(2)Cl(µ-O(2)CR)(4)](n) [R = Me-o-C(6)H(4) (4), Me-m-C(6)H(4) (5), Me-p-C(6)H(4) (6)] have also been obtained. These synthetic methods allow the use of greener solvents like water or ethanol. Moreover, solvothermal synthesis permits the direct crystallization of the desired complexes, which are extremely insoluble in common solvents, during the synthetic process. Therefore, the crystal structure of all of them has been established using single crystal X-ray diffraction. Complex 1 shows a Ru-Cl-Ru angle of 180° and constitutes the first example of a chloridotetraamidatodiruthenium derivative displaying linear chains in the solid state. In contrast, complexes 2·0.5EtOH, and 3-6 show polymeric arrangements with the diruthenium units linked by chloride ligands, forming zigzag chains with Ru-Cl-Ru angles ranging between 117.03(6) and 121.45(3)°. All of the complexes show magnetic moments at room temperature corresponding to three unpaired electrons in agreement with the σ(2)π(4)δ(2)(π*δ*)(3) ground-state configuration, which indicates a similar magnetic behaviour in amidato and carboxylato derivatives. In the linear arrangement of complex 1 there is a better magnetic communication between diruthenium units (antiferromagnetic coupling, zJ = -10.5 or -8.7 cm(-1)) than the one observed in the zigzag 2-6 complexes (zJ = -1.23 to -5.75 cm(-1)).

A conducting coordination polymer based on assembled Cu9 cages.

We report on a novel highly semiconducting 1D coordination polymer architecture obtained by the reaction of a Cu(II) salt with 2,2'-dipyridyldisulfide under microwave solvothermal conditions. This reaction proceeds with an unusual C-S and S-S bond cleavage of the 2,2'-dipyridyldisulfide ligand. The unprecedented architecture of this coordination polymer consists of a 1D chain formed by the assembling of Cu9 cluster cages. The electrical conductivity behavior of this novel material suggests new perspectives for the use of coordination polymers as electrical conducting materials.

Time-dependence structures of coordination network wires in solution.

We present a mechanochemistry-based procedure to isolate individual chains on surfaces of a ruthenium MMX polymer. After sonication of solutions containing the two building blocks of the mentioned MMX polymer, time-depending structures are formed in the solution. The architecture of the different structures obtained in this process, as a function of the time, is monitored using atomic force microscopy. The resulting structures exhibit uniform subnanometer diameters over microns length, in agreement with the expected diameter for an individual polymer chain. From the atomic force microscope images, we infer a long persistence length for the linear structures. Finally, the effect of the temperature solution in the formation of the different structures is also addressed.

MMX polymer chains on surfaces.

Fibres of [Ru(2)Br(micro-O(2)CEt)4]n polymer have been isolated on different surfaces under specific conditions, and morphologically characterised by AFM and STM, showing an unexpected helical internal structure.