National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments.

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers.

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products.

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products.

The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

Effects of ovariectomization and ractopamine hydrochloride inclusion on heifer feedlot performance, meat yield, and tenderness of select muscles.

Forty-eight British cross heifers were used to examine the effects of ovariectomization (OVX v. intact; INT) and ractopamine-HCl inclusion (0 or 0.41 mg/kg of BW day(-1); NORAC or RAC) for the final 31 days on performance, meat yield, and tenderness of select muscles. Ractopamine supplemented heifers had heavier BW (P≤0.05) and greater dressing percent than NORAC. Dressing percent was also greater (P<0.01) for INT v. OVX. LM area tended to be larger for RAC (P=0.07) and was larger for INT (P=0.05). Neither ractopamine inclusion nor sex class affected (P>0.08) organ weights or percent intramuscular fat. Ractopamine inclusion increased (P≤0.05) subprimal weight for the shoulder clod and bottom round. However, ractopamine inclusion and sex class had minimal effects on subprimal yields or slice shear force. Heifers receiving ractopamine had increased BW, DP, carcass weight and select subprimal weights without impacting meat quality. Ovariectomization did not influence the affects of ractopamine supplementation.

Survey of transportation procedures, management practices, and health assessment related to quality, quantity, and value for market beef and dairy cows and bulls.

This survey consisted of data collected from 23 beef harvest plants to document transportation procedures, management practices, and health assessments of market beef and dairy cows and bulls (about n ≅ 7,000 animals). Gooseneck/bumper-pulled trailers were used more often to transport dairy cattle than beef cattle to market whereas tractor-trailers were used more often to transport beef cattle than dairy cattle. All loads (n = 103) met the American Meat Institute Foundation guidelines for spacing. Loads where more than 3% of the cattle slipped during unloading were observed in 27.3% of beef loads and 29.0% of the dairy loads. Beef loads had numerically greater usage of electrical prods (32.4%) versus dairy loads (15.4%) during unloading and were more likely to have a variety of driving aids used more aggressively on them. Fewer cattle had horns, brands, and mud/manure contamination on hides than in the previous survey in 1999. The predominant hide color for beef cows was black (44.2%) whereas the predominant color for dairy cows was the Holstein pattern (92.9%). Fewer cattle displayed evidence of bovine ocular neoplasia (2.9%) than in previous surveys in 1994 (8.5%) and 1999 (4.3%). Knots on live cattle were found less in the round (0.5%) and more in the shoulder region (4.6%) than in 1999 (1.4% and 0.4%, respectively). Dairy cows were more frequently lame in 2007 (48.7%) than 1999 (39.2%) whereas beef cows had numerically less lameness (16.3% vs. 26.6%, respectively). Most beef cows (62.3%) and dairy cows (68.9%) received midpoint body condition scores (3, 4, and 5 for beef; 2 and 3 for dairy). Beef cows had higher numerical percentages of no defects present (72.0%) versus dairy cows (63.0%) when evaluated for a variety of reproductive, health, or management conditions. Continued improvements in several key factors related to transportation, management, and health were observed in this survey, which could result in increased value in market beef and dairy cows and bulls.

Effects of feeding extruded full-fat cottonseed pellets in place of tallow as a fat source for finishing heifers on feedlot performance, carcass characteristics, sensory traits, display color, and fatty acid profiles.

The objective of this study was to examine the effects of supplemental feeding of full-fat extruded cottonseed pellets (FFECS) compared with tallow on carcass characteristics, sensory traits, retail display color, and fatty acid profiles, especially CLA isomers in finishing heifers. Twenty-one Angus heifers (450 ± 5 kg) were assigned randomly to 1 of 3 experimental diets: 1) 100% supplemental fat from tallow at 4.1% of ration DM (TAL), 2) a 50:50 ratio of supplemental fat from a combination of tallow at 2.1% and FFECS at 12.8% of ration DM (TAL/ECS), and 3) 100% supplemental fat from FFECS at 25.6% ration DM (ECS). All rations were formulated to contain 7.5% fat on a DM basis. Heifers were individually fed, ad libitum, for 82 d, and BW, G:F, DMI, ADG, and body composition via ultrasound were collected at 3 to 4 wk intervals. After 82 d on feed heifers were slaughtered under federal inspection, and carcass characteristics were measured (at 24 h). The LM was removed for retail display color (1, 3, 6, 10 d), Warner-Bratzler shear force (1, 3, 7, 14, 21 d postmortem aging), sensory analysis (1, 7, 14, 21 d postmortem aging), and fatty acid profile analysis. Subcutaneous fat, including all layers, was removed from the LM for fatty acid profile analysis, and ground beef patties (80:20) were produced with lean from the brisket and fat from the plate for retail color analysis (1, 2, 4, 7 d). Supplemental fat source did not influence feedlot performance for any of the traits measured (P > 0.12) or any carcass traits related to yield, quality, or LM color at the 12th- to 13th-rib interface (P > 0.15). Supplemental fat source did not affect Warner-Bratzler shear force or any sensory traits (P > 0.20), but LM steaks became more tender as postmortem aging time increased up to 14 d (P < 0.01). During retail display of LM steaks and beef patties, the only difference was LM steaks from ECS were darker (lower L* value) than TAL or TAL/ECS steaks (P < 0.02). As display time increased, LM steak and beef patty objective and subjective color deteriorated (P < 0.01). Although feeding FFECS compared with tallow increased linoleic acid (C18:2(n-6)) in both intramuscular and subcutaneous fat (P < 0.04), this did not lead to an increase in total CLA content (P > 0.90). Full-fat extruded cottonseed pellets are interchangeable with tallow in heifer finishing diets without impacting feeding performance, meat quality, shelf life color, or CLA content of adipose sites.

Use of corn gluten feed and dried distillers grains plus solubles as a replacement for soybean meal and corn for supplementation in a corn silage-based stocker system.

Corn gluten feed and dried distillers grains plus solubles (DDGS) were evaluated as replacements for soybean meal and ground ear corn when supplemented with corn silage during 2 yr of a beef cattle stockering program. Experiment 1: In YR 1, 104 steers (initial BW = 305 ± 30 kg), and in YR 2, 56 steers and 38 heifers (initial BW = 301 ± 32 kg) were stratified by weight and assigned to 1 of 9 groups. Each group was randomly assigned to 1 of 3 corn silage-based (75% of DM) diets supplemented with: i) corn gluten feed (CGF), ii) DDGS, or iii) soybean meal and ground ear corn (CSBM) at 25% of DM. On d 0, 28, 56, and 84, BW and BCS were recorded. Additionally, ribeye area, 12th rib fat thickness, intramuscular fat, and rump fat thickness were assessed via ultrasound on 9 (YR1) and 4 (YR 2) steers per pen that were randomly assigned as observational units. Average daily gain was greater (P < 0.05) for steers fed DDGS and CSBM compared with CGF (1.08, 1.08, and 0.94 kg/d, respectively). Average DMI (P < 0.05) was less for DDGS compared with CSBM with CGF intermediate (18.1, 18.8, 20.2 g/kg BW, respectively), and the resulting G:F was greatest for DDGS (P = 0.01). Cost per kilogram of BW gain was least for DDGS (P > 0.05). Ultrasound data indicated no differences (P ≥ 0.13) in predicted carcass traits among treatments. Experiment 2: Diets from Exp. 1 were subjected to in vitro digestion for incubation times of 0, 2, 4, 8, 16, 24, 48, and 72 h to estimate DM degradation, gas production kinetics, and CP fractions. The potentially degradable DM fraction was greater (P = 0.01) for CSBM compared with CGF and DDG. Total gas production and rate of gas production was not different among treatments (P > 0.42). Rumen degradable protein was greatest for CSBM and least for DDG (P = 0.001). These data indicate that DDGS can be used to replace soybean meal and corn in silage-based stocker systems to decrease feed costs without compromising animal performance and CGF may decrease animal performance.

Strain and sex effects on growth performance and carcass traits of contemporary commercial broiler crosses.

In total, 3,840 sexed birds from 6 commercial cross broiler strains (4 male and 3 female) were raised and processed to analyze the effect of strain and sex on growth performance and carcass traits. Chicks from M1 × F1, M2 × F1, M3 × F1, M4 × F1, M3 × F2, and M4 × F3 crosses were sexed. Fifty female and 40 male chicks were randomly allocated to 24 floor pens (119 × 300 cm) covered with pine shavings in each of 4 rooms. The FCR was adjusted for the weight of dead birds (AFCR). Four birds/pen were processed at 7 wk of age. Carcasses were deboned after 2 h of chilling (n = 32 birds per treatment). There were significant strain by sex interactions for BW gain from 0 to 21 and 0 to 48 d. Strain differences in growth rate and mortality increased with age. The cross with the fastest growth rate also had the highest mortality. Because of differences in mortality and carcass yields, birds with the fastest growth (0-48 d) did not produce the most salable meat. Both the heaviest live BW per bird at 48 d (3.45 kg) and highest mortality (13.40%) were observed with the M4 × F3 cross. However, the heaviest live BW per 1,000 chicks placed was from the M3 × F2 cross (3,107 kg). The highest chilled carcass yield was from the M3 × F2 cross (76.05% of live BW) as was the highest meat yield (2,364 kg per 1,000 chicks placed) and highest pectoralis meat yield (805 kg per 1,000 chicks placed). The M3 × F2 cross produced the most total white meat (1,058 kg per 1,000 chicks placed), but interestingly the slowest-growing strain (M1 × F1) produced more white meat (breast + tenders + wings) than did the fastest-growing M4 × F3 strain (980 kg vs. 1,002 kg per 1,000 chicks placed). These results demonstrate the complexity of choosing between commercial strain crosses. The most profitable choice will be dependent on whether whole birds or parts are marketed and the relative values of the parts.

Effects of organic selenium supplementation on growth performance, carcass measurements, tissue selenium concentrations, characteristics of reproductive organs, and testis gene expression profiles in boars.

The objective was to compare growth and physiological responses in boars fed diets supplemented with organic or inorganic sources of Se. At weaning, crossbred boars (n = 117; 8.3 kg of BW) were placed in nursery pens (3 boars/pen) and assigned within BW blocks to receive on an ad libitum basis 1 of 3 dietary treatments: I) basal diets with no supplemental Se (controls), II) basal diets supplemented with 0.3 mg/kg of organic Se, and, III) basal diets supplemented with 0.3 mg/kg of sodium selenite (13 pens/dietary treatment). Average daily gain (470 g/d), ADFI (896 g/d), and G:F (0.54) were similar among groups. Blood Se concentrations were greater (P < 0.01) for boars consuming organic Se (107.5 ± 4.8 µg/L) or sodium selenite (114.7 ± 4.8 µg/L) compared with controls (28.4 ± 4.8 µg/L). Intact pens of boars (11 pens/dietary treatment) were moved to a grow-finish barn and continued to receive appropriate diets on an ad libitum basis. Average daily gain (1,045 g/d) and ADFI (2,716 g/d) were similar among groups. Gain:feed was affected by treatment (P = 0.02) and was greater (P < 0.06) for boars fed organic Se (0.378 ± 0.004) compared with boars fed sodium selenite (0.368 ± 0.004) or controls (0.363 ± 0.004). Blood Se concentrations were greater (P < 0.01) in grow-finish boars consuming organic Se (198.9 ± 5.5 µg/L) than boars consuming sodium selenite (171.4 ± 5.4 µg/L) or controls (26.7 ± 5.4 µg/L). Treatment did not affect (P > 0.15) HCW, dressing percent, carcass length, LM area, standardized fat-free lean, lean percentage, backfat thickness, visual color, firmness, marbling, or Minolta loin color scores. Selenium supplementation did not affect (P > 0.17) testis or accessory sex gland sizes. Concentrations of Se in loin, liver, kidney, testis, cauda epididymis, and accessory sex glands were greatest (P < 0.01) in boars receiving organic Se, intermediate in boars receiving sodum selenite, and least in control boars. Microarray analysis of testis gene expression did not detect differences (P > 0.05) due to dietary treatment. Testis gene expression of glutathione peroxidase 4, as determined using quantitative PCR, was increased (P < 0.01) in boars fed organic Se compared with those fed sodium selenite. In summary, dietary supplementation of boars with organic Se failed to alter ADG or ADFI but enhanced G:F during grow-finish. More research is needed to discern the mechanism by which organic Se improves feed efficiency in boars.

Effect of long-term corn by-product feeding on beef quality, strip loin fatty acid profiles, and shelf life.

The objective of this study was to evaluate the meat quality and shelf life of steaks from steers fed dried distillers grains with solubles (DDGS) or dried corn gluten feed (CGF) compared with soybean meal with corn (SBM) as a protein supplement from weaning to slaughter. Angus cross steers (n = 81; BW = 306 ± 26.1 kg) were randomly assigned to pens (n = 9) and fed a stocker diet of corn silage (75% of DM) with DDGS, CGF, or SBM and ground ear corn. After 84 d of stockering, 12 steers (BW = 397 ± 15.3 kg) were randomly selected from each treatment and finished using the same protein supplement at 25% of DM for 100 d. Carcass data were collected (24 h) and the longissimus lumborum was fabricated into steaks at 48 h postmortem. Steaks were assigned to proximate analysis, Warner-Bratzler shear force (7-, 14-, or 21-d aging), and retail display (1, 3, 6, or 9 d). Protein source did not affect carcass yield, quality, or longissimus lumborum composition (P > 0.05). After 7 d of aging, DDGS and CGF steaks were more tender (P < 0.01) than SBM, but were similar (P = 0.30) after 14 and 21 d of aging. Feeding corn by-products did not influence subjective overall color acceptance (P = 0.17) in this study, but acceptance declined over time (P < 0.01). Subjective redness was similar (P > 0.05) among diets except SBM steaks were more red (P < 0.01) than DDGS after 9 d. On d 3 and 6 of retail display, CGF steaks exhibited more discoloration (P < 0.04) than SBM or DDGS steaks. However, after 9 d DDGS steaks were more discolored (P < 0.01) than CGF or SBM. Objective L* was lighter for CGF (P < 0.04) over 9 d of display, and all treatments became darker (P < 0.01) as time increased. Redness (a*) declined (P < 0.01) over time with SBM steaks maintaining more color in the red spectrum than CGF and DDGS after 6 d of display. Protein source did not affect (P > 0.05) the rate of lipid oxidation. Total SFA concentrations were similar (P > 0.05) among treatments; however, total MUFA were less (P < 0.05) and total PUFA concentrations were greater (P < 0.05) in DDGS steaks compared with SBM or CGF steaks. These data show that DDGS or CGF can be fed as a protein supplement at 25% DM from weaning until slaughter while maintaining meat quality when compared with steers fed soybean meal as a protein supplement.

Effect of body composition on diet selection in finishing pigs.

The objective of this work was to determine if pigs of similar BW, but differing in 10th-rib backfat thickness, would differ in their selection of dietary protein. The first experiment was conducted with gilts and was designed in a 2 x 2 factorial arrangement with the main effects of body fat (lean vs. fat) and feeding program (single vs. choice). Crossbred gilts (n = 32) with an initial BW of 79 kg were sorted into high (2.24 cm, fat) and low backfat (1.51 cm, lean; P < 0.001) groups based on real-time ultrasound scans at the 10th rib. Diets were 1) a low-protein corn-based diet supplemented with crystalline AA (8.5% CP, 0.58% Lys) and 2) a high-protein corn- and soybean meal-based diet (22.7% CP, 1.275% Lys). During wk 1, all pigs were fed a 50:50 mix of the low-protein and high-protein diets. From d 7 to 28, one-half the pigs in the lean and fat groups were given a choice of low- and high-protein diets in separate feeders, whereas the others remained on the 50:50 mix. Initial differences in 10th-rib backfat thickness were maintained through d 28 (fat, 3.02 cm; lean, 2.42 cm; P < 0.001). Circulating leptin concentrations were greater in the fat pigs than in the lean pigs (3.84 vs. 3.35 ng/mL; P < 0.05). Average daily gain (1.06 kg/d) and ADFI (2.64 kg/d) were not different between treatment groups. However, the pattern of selection was different in the choice groups such that lean pigs consumed more (64.4%) of the high-protein diet than did fat pigs (35.6%, P < 0.01), resulting in a difference in the percentage of protein consumed (lean = 16.9% CP; fat = 12.8% CP; P < 0.01). A second experiment of similar design, but with barrows (n = 32; initial BW 69 kg), was conducted. Barrows classified as fat had 2.33 cm of 10th-rib backfat as compared with 1.75 cm in the lean group (P < 0.01). The percentage of protein in the diet selected by the fat barrows was not different from that selected by the lean barrows (15.9 vs. 17.4%). The lack of difference in selection pattern in barrows may be accounted for by the relatively smaller difference in body composition between the fat and lean classifications in the barrows in the choice feeding program as compared with body composition of the gilts. These results demonstrate that gilts of similar BW, but differing in composition, likely have different nutrient requirements and diet selection patterns. Although allowing pigs to self-select did not alter growth rate, the results indicated that diet selection can be used to allow pigs to meet their individual nutrient requirements more closely.

The influence of thiazolidinediones on adipogenesis in vitro and in vivo: potential modifiers of intramuscular adipose tissue deposition in meat animals.

Thiazolidinediones (TZD) are insulin sensitizing agents currently used for the treatment of type 2 diabetes and are widely used as adipogenic agents because they are ligands of peroxisome proliferator-activated receptor gamma (PPARgamma), a key adipogenic transcription factor. In vivo and in vitro studies of TZD as potential modifiers of intramuscular or marbling adipogenesis are reviewed. Thiazolidinedione-induced adipogenesis has been reported in numerous cell culture systems, including rodent, human, bovine, and porcine adipose tissue stromal-vascular (S-V) cell cultures. Studies of porcine S-V cell cultures derived from semitendinosus muscle show that TZD can potentially modify intramuscular or marbling adipogenesis. Preadipocyte recruitment was TZD-dependent in muscle S-V cultures but TZD-independent in adipose S-V cultures. There appear to be differences between adipocytes in muscle and subcutaneous adipose tissue, reminiscent of differences observed in adipocytes from different adipose tissue depots. Troglitazone, a TZD, induces marbling adipogenesis without inhibiting myogenesis when cells are grown on laminin precoated culture dishes. Additionally, troglitazone treatment does not increase lipid content in porcine adipose tissue or muscle S-V cell cultures. Thiazolidinedione treatment increases lipid content of muscle in rodents and humans; however, rosiglitazone treatment for 49 d in pigs did not influence muscle lipid content and meat quality, but several significant changes in muscle fatty acid composition were observed. Although timing of treatment with TZD needs to be optimized, evidence suggests these compounds may enhance marbling deposition in swine.

The effect of anabolic implants on intramuscular lipid deposition in finished beef cattle.

Two experiments were conducted to determine the effects of anabolic implants on performance, changes in ultrasound measurements, carcass quality, cellularity of i.m. and s.c. adipose depots, and mRNA expression of acetyl CoA carboxylase (ACC), stearoyl CoA desaturase (SCD), and lipoprotein lipase (LPL) in i.m. adipose tissue of finished beef cattle. Angus heifers (experiment 1: n = 10; 411 kg of BW) and steers (experiment 2: n = 18; 279 kg of BW) were randomly allotted as control (C) or implanted with Synovex-Plus (SP) at d 0 and midway through the finishing period. The cattle were fed a high-concentrate diet and were weighed at approximately 28-d intervals. Heifers and steers were finished for 108 and 133 d, respectively. At slaughter, a section of the LM (sixth to ninth rib) was removed, and i.m. adipose tissue was dissected for mRNA analysis. Subcutaneous and i.m. adipose tissues also were collected for determination of cellularity. At 48 h postmortem, carcass data were collected, and a steak (12th rib) was removed for analysis of lipid and fatty acid composition. Body weight did not differ (P > 0.10) between treatments until after reimplanting of the heifers (d 55) or steers (d 73). Average daily gain was 36 and 16% faster (P < or = 0.01) for implanted heifers and steers, respectively, compared with their control counterparts. Implanting resulted in larger (P < or = 0.10) HCW and LM area for heifers and steers. However, implanting did not affect (P > 0.10) dressing percent, fat thickness, percentage of KPH, yield grade, or marbling score. Intramuscular lipid content and concentrations of major fatty acids did not differ (P > 0.10) between treatments. Percentage of SC adipocytes was greater at larger diameters ( > 150 microm), whereas the majority of i.m. adipocytes were at small to middle diameters (50 to 150 microm). The number of i.m. adipocytes per gram of tissue was greater (P < 0.05) for SP than C and also were greater (P < 0.05) than the number of s.c. adipocytes in SP heifers. In experiment 2, adipocytes per gram of tissue tended to be greater (P = 0.07) for SP than C and were greater (P < 0.01) for i.m. than s.c. In experiment 1, average cell diameter and volume did not differ (P > 0.10) between treatments and tissues, but in experiment 2 both cellularity traits were greater (P < 0.01) for s.c. than for i.m.. Implanting did not alter mRNA expression of ACC, SCD, or LPL in i.m. adipose tissue. This study shows that anabolic implants do not appear to have direct effects on i.m. lipid deposition.

Effects of ractopamine on performance and composition of pigs phenotypically sorted into fat and lean groups.

Crossbred barrows (n = 144; 80 kg) from four farrowing groups were phenotypically selected into fat (FAT) and lean (LEAN) pens using ultrasound. The difference in 10th-rib fat depth between the LEAN and FAT groups was > or =0.5 cm. Within a farrowing group, pigs were assigned to pens (five pigs per pen and eight pens per phenotype) to equalize pen weight and fat depth. Pigs were fed a corn-soybean meal diet containing 19% CP, 1.0% added animal/vegetable fat, and 1.1% lysine (as-fed basis). Half the pens received 10 ppm (as-fed basis) of ractopamine (RAC) during the 28-d finishing phase. At 7-d intervals, live weight and feed disappearance were recorded to calculate ADG, ADFI, and G:F, and 10th-rib fat depth and LM area were ultrasonically measured to calculate fat-free lean and fat and muscle accretion rates. During the first 7 d on feed, LEAN pigs fed RAC gained less (P < 0.05) than FAT pigs fed RAC or LEAN and FAT pigs fed the control diet (RAC x phenotype; P = 0.02); however, RAC did not (P > 0.25) affect ADG after the second, third, and fourth weeks, or over the entire 28-d feeding period. Although wk-2 and -3 ADG were higher (P < or = 0.03) in LEAN than in FAT pigs, phenotype did not (P = 0.08) affect overall ADG. Dietary RAC decreased (P < or = 0.05) ADFI over the 28-d feeding trial, as well as in wk 2, 3, and 4, but intake was not (P > 0.20) affected by phenotype. Neither RAC nor phenotype affected (P > 0.10) G:F after 7 d on trial; however, RAC improved (P < or = 0.04) wk-3, wk-4, and overall G:F. Lean pigs were more efficient (P < or = 0.05) in wk 2 and 3 and over the duration of the trial than FAT pigs. Ultrasound LM accretion (ULA) was not (P > or = 0.10) affected by RAC; however, LEAN pigs had greater (P < or = 0.02) ULA in wk 2 and 4 than FAT pigs. Although fat depth was lower (P < 0.01) in RAC-fed pigs than pigs fed the control diet, ultrasound fat accretion rate indicated that RAC-pigs deposited less (P = 0.04) fat only during wk 4. In addition, calculated fat-free lean (using ultrasound body fat, ULA, and BW) was increased (P < 0.05) in RAC pigs after 3 and 4 wk of supplementation. In conclusion, RAC enhanced the performance of finishing swine through decreased ADFI and increased G:F, whereas carcass lean was enhanced through decreases in carcass fat and increases in carcass muscling.

Effects of supplemental rumen-protected conjugated linoleic acid or linoleic acid on feedlot performance, carcass quality, and leptin concentrations in beef cattle.

Thirty-six Angus x Hereford heifers (365 kg) were used to determine effects of dietary lipid supplementation from two sources during the final 32 or 60 d of feeding on serum and adipose tissue leptin concentrations, animal performance, and carcass characteristics. Following an initial feeding period of 56 d, heifers were fed one of three diets in a 3 x 2 factorial arrangement: 1) basal diet, 2) basal diet plus 4% (DM basis) corn oil, or 3) basal diet plus 2% (DM basis) rumen-protected conjugated linoleic acid (a mixture of Ca-salts of palm oil fatty acids with 31% conjugated linoleic acid). Jugular blood samples were collected at 28-d intervals (d 28 to 118) and serum subsequently harvested for leptin quantification via RIA. Real-time ultrasound measurements were collected at 28-d intervals across time on feed. At slaughter, samples were obtained from various adipose depots. Data were analyzed with dietary treatment, length of supplementation, adipose depot (when appropriate), and all two- and three-way (when appropriate) interactions in the repeated measures model. Measures of feedlot performance, including ADG, DMI, and gain:feed did not differ (P > 0.23) with dietary treatment or supplementation length. Heifers supplemented with corn oil tended (P < 0.07) to have higher marbling scores following 32 d of treatment than those supplemented with rumen-protected conjugated linoleic acid, with controls intermediate. Quality grade and hot carcass weight did not differ (P > 0.15) with treatment or length of supplementation. Leptin concentrations were higher (P < 0.05) from d 57 to 118 on feed than the initial period (d 0 to 56) of dietary adaptation when all animals received the basal diet. Circulating leptin concentrations were not affected by dietary treatment. However, leptin concentrations in adipose tissues were greater (P < 0.05) for heifers supplemented with corn oil than either control or rumen-protected conjugated linoleic acid diets, which did not differ. Compared with adipose tissues from rumen-protected conjugated linoleic acid-supplemented animals, tissues from heifers fed corn oil contained 68% greater leptin concentration. Correlations between performance, carcass traits, and serum leptin concentrations were low. Serum leptin concentrations across time on feed were not associated with carcass and performance data, including ADG, DMI, and gain:feed. Based on these data, concentrations of leptin are not related to indices of feedlot performance and carcass quality in beef cattle.

Effect of sire on mu- and m-calpain activity and rate of tenderization as indicated by myofibril fragmentation indices of steaks from Brahman cattle.

The objectives of this study were to assess the influence of sire on mu- and m-calpain activities, to evaluate the relationships of activities of these enzymes to other traits related to beef palatability, and to assess the influence of sire on the rate of tenderization (as measured by myofibril fragmentation index [MFI]) in Brahman longissimus muscle. Brahman calves (n = 87), sired by nine bulls, were born, weaned, fed, and slaughtered in central Florida. Traits evaluated were mu- and m-calpain activities and MFI after 1, 7, 14, and 21 d of aging. Other traits were analyzed to determine their associations with mu- and m-calpain activity and MFI, including calpastatin activity, percentage of raw and cooked lipids, Warner-Bratzler shear force (WBSF) values after 7, 14, and 21 d of aging, and sensory panel rating of tenderness, juiciness, and connective tissue amount after 14 d of aging. Data were analyzed using a model with sire, sex, year, and slaughter group (calves of the same sex slaughtered on the same date) as fixed effects, and adjusted to a constant adjusted 12th-rib fat thickness. Sire affected mu-calpain activity (P < 0.04), calpastatin activity (P < 0.01), d-14 MFI (P < 0.02), d-7 WBSF (P < 0.05), d-14 WBSF (P < 0.04), and sensory panel juiciness score (P < 0.01), but not (P < 0.75) m-calpain activity. Measures of tenderness and palatability were generally moderately to strongly correlated (both simple and residual correlations) with calpastatin and m-calpain activity. Myofibril fragmentation index residuals (adjusted for all model components except sire) after all aging periods were fitted using nonlinear regression to the exponential curve (MFI(i) = kappa0 + kappa1 exp[kappa2 t(i)] + epsilon(i), where t(i) represents aging in days, k0 is ultimate MFI after aging, kappa1 is the difference between initial and ultimate MFI, kappa2 is the rate of increase in MFI, and epsilon(i) is the error term associated with the ith observation, assumed to be independent and identically distributed normally). Sires had different estimates and combinations of estimates, which were used to plot MFI change with time. These curves visually differed for sires and suggested that postmortem tenderization extent and rate differ as well. Use of a combination of these estimated parameters in a selection/carcass sorting program represents an alternative consideration for tenderization improvement programs.

Effects of selection for ultrasound intramuscular fat percentage in Angus bulls on carcass traits of progeny.

Angus bulls (n = 20) from three pure-bred herds in Georgia were acquired to determine the impact of selecting sires based on phenotypic yearling ultrasound intramuscular fat percentage (UIMF) or UIMF EPD on marbling score of steer progeny. Each year in each herd, pairs of bulls were selected to create large differences based on their age adjusted phenotypic yearling UIMF measurements. The average UIMF, weighted by number of progeny per sire, was 3.75% (SD = 1.10%) and 1.70% (SD = 0.53%) for high UIMF (HU) and low UIMF (LU) bulls, respectively. All available ultrasound measurements collected in the purebred co-operator herds were combined with other ultrasound records collected by the American Angus Association for the computation of genetic values for ultrasound fat thickness, ribeye area, and intramuscular fat percentage. Each year bulls were randomly mated to 14 to 30 commercial Angus females. Carcass weight, fat thickness at the 12th rib, ribeye area at the 12th rib, marbling score, yield grade, and quality-grade measurements were collected on 188 steer progeny. Carcass data were linearly adjusted to 480 d of age at slaughter. Steer progeny sired by HU bulls had higher age-adjusted marbling score and quality grade (P < 0.05), and smaller age-adjusted ribeye area (P < 0.05) than steer progeny sired by LU bulls. No significant differences between phenotypic UIMF lines were found for age-adjusted fat thickness (P = 0.84) and yield grade (P = 0.33) in the steer progeny. The regression of age-adjusted carcass marbling score and quality grade of the steer progeny on ultrasound intramuscular fat percentage EPD of the sires produced highly significant regression coefficients of 90.50 and 49.20, respectively. Thus, yearling Angus bulls selected for high-phenotypic UIMF and UIMF EPD can be expected to produce steer progeny with significantly higher amounts of marbling and quality grade. It also appears that marbling can be increased without corresponding increases in external fat thickness and yield grade.

Gluteus medius and rump fat depths as additional live animal ultrasound measurements for predicting retail product and trimmable fat in beef carcasses.

This study was conducted to determine the ability of additional ultrasound measures to enhance the prediction accuracy of retail product and trimmable fat yields based on weight and percentage. Thirty-two Hereford-sired steers were ultrasonically measured for 12th-rib fat thickness, longissimus muscle area, rump fat thickness, and gluteus medius depth immediately before slaughter. Chilled carcasses were evaluated for USDA yield grade factors and then fabricated into closely trimmed, boneless subprimals with 0.32 cm s.c. fat. The kilogram weight of end-point product included the weight of trimmed, boneless subprimals plus lean trim weights, chemically adjusted to 20% fat, whereas the fat included the weight of trimmed fat plus the weight of fat in the lean trim. Prediction equations for carcass yield end points were developed using live animal or carcass measurements, and live animal equations were developed including ultrasound ribeye area or using only linear measurements. Multiple regression equations, with and without ultrasound rump fat thickness and gluteus medius depth, had similar R2 values when predicting kilograms of product and percentages of product, suggesting that these alternative variables explained little additional variation. Final unshrunk weight and ultrasound 12th-rib fat thickness explained most of the variation when predicting kilograms of fat. Rump fat and gluteus medius depth accounted for an additional 10% of the variation in kilograms of fat, compared with the equation containing final weight, ultrasound ribeye area, and ultrasound 12th-rib fat thickness; however, the two equations were not significantly different. Prediction equations for the cutability end points had similar R2 values whether live animal ultrasound measurements or actual carcass measurements were used. However, when ultrasound ribeye area was excluded from live animal predictions, lower R2 values were obtained for kilograms of product (0.81 vs 0.67) and percentages of product (0.41 vs 0.17). Conversely, the exclusion of ultrasound ribeye area had little effect on the prediction accuracy for kilograms of fat (0.75 vs 0.74) and percentage fat (0.50 vs 0.40). These data substantiate the ability of live animal ultrasound measures to accurately assess beef carcass composition and suggest that the alternative ultrasound measures, rump fat and gluteus medius depth, improve the accuracy of predicting fat-based carcass yields.