Liquid crystal microlens arrays recorded by polarization holography.

We report the characterization of diffractive microlens arrays (MAs) using a polarization holographic approach assisted by a spatial light modulator (SLM), in a nematic liquid crystal (NLC) cell. The MAs were recorded in the photoaligning substrates of the cell and then replicated in the NLC bulk, through the surface interactions. The transparency of the NLC on a wide range of wavelengths and the ability to tune its optical birefringence, through an external voltage, allowed us to create MAs with high efficiency. We have presented the results obtained for diverse MAs configurations, composed by spherical and cylindrical microlenses and characterized by different focal lengths. The efficiency reaches a value of 90%, at a wavelength of 633 nm.

A bifunctional amorphous polymer exhibiting equal linear and circular photoinduced birefringences.

The large and reversible photoinduced linear and circular birefringences in azo-compounds are at the basis of the interest in these materials, which are potentially useful for several applications. Since the onset of the linear and circular anisotropies relies on orientational processes, which typically occur on the molecular and supramolecular length scale, respectively, a circular birefringence at least one order of magnitude lower than the linear one is usually observed. Here, the synthesis and characterization of an amorphous polymer with a dimeric repeating unit containing a cyanoazobenzene and a cyanobiphenyl moiety are reported, in which identical optical linear and circular birefringences are induced for proper light dose and ellipticity. A pump-probe technique and an analytical method based on the Stokes-Mueller formalism are used to investigate the photoinduced effects and to evaluate the anisotropies. The peculiar photoresponse of the polymer makes it a good candidate for applications in smart functional devices.

Polarization holograms in a bifunctional amorphous polymer exhibiting equal values of photoinduced linear and circular birefringences.

Light-controlled molecular alignment is a flexible and useful strategy introducing novelty in the fields of mechanics, self-organized structuring, mass transport, optics, and photonics and addressing the development of smart optical devices. Azobenzene-containing polymers are well-known photocontrollable materials with large and reversible photoinduced optical anisotropies. The vectorial holography applied to these materials enables peculiar optical devices whose properties strongly depend on the relative values of the photoinduced birefringences. Here is reported a polarization holographic recording based on the interference of two waves with orthogonal linear polarization on a bifunctional amorphous polymer that, exceptionally, exhibits equal values of linear and circular birefringence. The peculiar photoresponse of the material coupled with the holographic technique demonstrates an optical device capable of decomposing the light into a set of orthogonally polarized linear components. The holographic structures are theoretically described by the Jones matrices method and experimentally investigated.

Single-step polarization holographic method for programmable microlens arrays.

Optical microsystems have become important tools for imaging, optofluidics, and sensor applications. Here we show a versatile method to create microlens arrays (MAs) exploiting spatial-light-modulator-assisted polarization holography, which enables an efficiency of diffraction up to 100%. We demonstrate the large flexibility of the proposed approach by codifying mixed MAs, i.e., composed of spherical and cylindrical lenses with different focal lengths, either positive or negative. Reconfigurable MAs with 70% total diffraction efficiency have been recorded on a photosensitive polymer that exhibits linear photoinduced birefringence with long time stability as well as optical and thermal reversibility. The good quality of the MA has been shown by a digital holographic test.

Pure two-dimensional polarization patterns for holographic recording.

Two-dimensional (2D) polarization patterns are achieved by the interference of two pairs of beams with perpendicular planes of incidence and orthogonal polarizations (i.e. linear or circular). In both cases, imposing a phase shift of π/2 between consecutive beams contains the amplitude modulation of the optical field in the superposition region and, thus, pure 2D polarization patterns are created. The recording of these interference fields in a polarization-sensitive material, namely an amorphous azopolymer, creates reconfigurable 2D periodic microstructures with peculiar diffraction properties.

Method for artifact-free circular dichroism measurements based on polarization grating.

We propose a simple method to perform real-time measurements of circular dichroism (CD), which suppresses the artifacts introduced by anisotropic samples and nonideal optical elements in conventional spectrometers. A single polarization holographic grating is adopted, whose first orders of diffraction have amplitudes that are proportional to the right and left circular polarization component of the input light. We demonstrate that, exploiting unpolarized white light and the intrinsic spectral selectivity of the grating, the true CD spectrum is evaluated in parallel in the spectral range of interest from the intensities of the two diffraction orders, I(+1) and I(-1).

Polarization holographic recording in amorphous polymer with photoinduced linear and circular birefringence.

Polarization grating recording in an amorphous and nonchiral azo copolymer has been investigated. The reported study shows that the amorphous polymeric film undergoes a light-guided inhomogeneous supramolecular modification as a consequence of the illumination with proper polarized light patterns, acquiring new functionalities. Both linear and circular, spatially modulated, photoinduced birefringences occur, attaining their peak values in the linearly and circularly polarized regions of the light pattern, respectively. The photoinduced anisotropic structures strongly affect the polarization state of the light propagating through them, and the characterization of their optical diffraction enables measurement of the amplitude of the linear and circular birefringences. The recorded gratings show long-time stability and full reconfigurability functional to the multiple holographic recording.

Polarization gradient: exploring an original route for optical trapping and manipulation.

We report a study of the capabilities of an optical tweezer based on polarization gradient. We use a light polarization pattern that is able to simultaneously exert forces and torques in opposite directions depending on the particle's position. It allows to perform oscillatory displacements and control the sense of rotation of several particles inside a uniformly illuminated region. Unconventional trapping of spinning particles in circularly polarized fringes has been observed, which suggests the involvement of hydrodynamic forces.

Spectrograph based on a single diffractive element for real-time measurement of circular dichroism.

In this study, a novel and simple diffractive spectrographic method for real-time measurements of circular dichroism (CD) is considered from a theoretical and experimental approach. A demonstrator prototype of the CD spectrograph has been developed and its performance has been compared with a commercial phase-modulation CD spectrometer. The main element of the device is a polarization holographic grating, recorded in a thin photosensitive organic film, by two interfering opposite circularly polarized beams. A peculiarity of this grating is that the amplitude of the +1 (-1) order of diffraction is proportional to the right (left) circular polarization component of the incoming beam. Here we demonstrate that the CD spectrum of a specimen can be easily evaluated from the intensities of the diffracted beams. A white light beam passing through the specimen is diffracted from the grating and the intensities of the +/-1 orders of diffraction are measured. Due to the spectral selectivity of the grating, the CD at each wavelength can be evaluated at the same time using two linear array detectors.

Photopolarimeter based on two gratings recorded in thin organic films.

A photopolarimeter based on two different kinds of diffraction gratings (a two-grating photopolarimeter) has been developed for real-time measurements of the four elements of the Stokes vector. The main elements of the device are a pure polarization grating and an ordinary transmission grating, both recorded by means of holographic techniques in thin films of organic materials. The first one consists of a diffraction grating recorded by two interfering opposite circularly polarized beams in a Langmuir-Blodgett film of an azo-compound material. The second component is a grating recorded by two interfering parallel circularly polarized beams in a thin film of a photosensitive polymer. Both gratings offer long time stability and good diffraction efficiency. Four photodiodes collect the first-order diffracted beams from these gratings, the output signals of which are read through an analog-to-digital converter by a PC. The optical alignment of the device is easy and the calibration is realized in a one-step procedure.