Purification of monoclonal antibodies using novel 3D printed ordered stationary phases.

3D printing offers the unprecedented ability to fabricate chromatography stationary phases with bespoke 3D morphology as opposed to traditional packed beds of spherical beads. The restricted range of printable materials compatible with chromatography is considered a setback for its industrial implementation. Recently, we proposed a novel ink that exhibits favourable printing performance (printing time ∼100 mL/h, resolution ∼200 µm) and broadens the possibilities for a range of chromatography applications thanks to its customisable surface chemistry. In this work, this ink was used to fabricate 3D printed ordered columns with 300 µm channels for the capture and polishing of therapeutic monoclonal antibodies. The columns were initially assessed for leachables and extractables, revealing no material propensity for leaching. Columns were then functionalised with protein A and SO3 ligands to obtain affinity and strong cation exchangers, respectively. 3D printed protein A columns showed >85 % IgG recovery from harvested cell culture fluid with purities above 98 %. Column reusability was evaluated over 20 cycles showing unaffected performance. Eluate samples were analysed for co-eluted protein A fragments, host cell protein and aggregates. Results demonstrate excellent HCP clearance (logarithmic reduction value of > 2.5) and protein A leakage in the range of commercial affinity resins (<100 ng/mg). SO3 functionalised columns employed for polishing achieved removal of leaked Protein A (down to 10 ng/mg) to meet regulatory expectations of product purity. This work is the first implementation of 3D printed columns for mAb purification and provides strong evidence for their potential in industrial bioseparations.

A workflow for the development of template-assisted membrane crystallization downstream processing for monoclonal antibody purification.

Monoclonal antibodies (mAbs) are commonly used biologic drugs for the treatment of diseases such as rheumatoid arthritis, multiple sclerosis, COVID-19 and various cancers. They are produced in Chinese hamster ovary cell lines and are purified via a number of complex and expensive chromatography-based steps, operated in batch mode, that rely heavily on protein A resin. The major drawback of conventional procedures is the high cost of the adsorption media and the extensive use of chemicals for the regeneration of the chromatographic columns, with an environmental cost. We have shown that conventional protein A chromatography can be replaced with a single crystallization step and gram-scale production can be achieved in continuous flow using the template-assisted membrane crystallization process. The templates are embedded in a membrane (e.g., porous polyvinylidene fluoride with a layer of polymerized polyvinyl alcohol) and serve as nucleants for crystallization. mAbs are flexible proteins that are difficult to crystallize, so it can be challenging to determine the optimal conditions for crystallization. The objective of this protocol is to establish a systematic and flexible approach for the design of a robust, economic and sustainable mAb purification platform to replace at least the protein A affinity stage in traditional chromatography-based purification platforms. The procedure provides details on how to establish the optimal parameters for separation (crystallization conditions, choice of templates, choice of membrane) and advice on analytical and characterization methods.

Evaluating 3D-printed bioseparation structures using multi-length scale tomography.

X-ray computed tomography was applied in imaging 3D-printed gyroids used for bioseparation in order to visualize and characterize structures from the entire geometry down to individual nanopores. Methacrylate prints were fabricated with feature sizes of 500 µm, 300 µm, and 200 µm, with the material phase exhibiting a porous substructure in all cases. Two X-ray scanners achieved pixel sizes from 5 µm to 16 nm to produce digital representations of samples across multiple length scales as the basis for geometric analysis and flow simulation. At the gyroid scale, imaged samples were visually compared to the original computed-aided designs to analyze printing fidelity across all feature sizes. An individual 500 µm feature, part of the overall gyroid structure, was compared and overlaid between design and imaged volumes, identifying individual printed layers. Internal subvolumes of all feature sizes were segmented into material and void phases for permeable flow analysis. Small pieces of 3D-printed material were optimized for nanotomographic imaging at a pixel size of 63 nm, with all three gyroid samples exhibiting similar geometric characteristics when measured. An average porosity of 45% was obtained that was within the expected design range, and a tortuosity factor of 2.52 was measured. Applying a voidage network map enabled the size, location, and connectivity of pores to be identified, obtaining an average pore size of 793 nm. Using Avizo XLAB at a bulk diffusivity of 7.00 × 10-11 m2s-1 resulted in a simulated material diffusivity of 2.17 × 10-11 m2s-1 ± 0.16 × 10-11 m2s-1.

Depth filter material process interaction in the harvest of mammalian cells.

Upstream advances have led to increased mAb titers above 5 g/L in 14-day fed-batch cultures. This is accompanied by higher cell densities and process-related impurities such as DNA and Host Cell Protein (HCP), which have caused challenges for downstream operations. Depth filtration remains a popular choice for harvesting CHO cell culture, and there is interest in utilizing these to remove process-related impurities at the harvest stage. Operation of the harvest stage has also been shown to affect the performance of the Protein A chromatography step. In addition, manufacturers are looking to move away from natural materials such as cellulose and Diatomaceous Earth (DE) for better filter consistency and security of supply. Therefore, there is an increased need for further understanding and knowledge of depth filtration. This study investigates the effect of depth filter material and loading on the Protein A resin lifetime with an industrially relevant high cell density feed material (40 million cells/ml). It focuses on the retention of process-related impurities such as DNA and HCP through breakthrough studies and a novel confocal microscopy method for imaging foulant in-situ. An increase in loading of the primary-synthetic filter by a third, led to earlier DNA breakthrough in the secondary filter, with DNA concentration at a throughput of 50 L/m2 being more than double. Confocal imaging of the depth filters showed that the foulant was pushed forward into the filter structure with higher loading. The additional two layers in the primary-synthetic filter led to better pressure profiles in both primary and secondary filters but did not help to retain HCP or DNA. Reduced filtrate clarity, as measured by OD600, was 1.6 fold lower in the final filtrate where a synthetic filter train was used. This was also associated with precipitation in the Protein A column feed. Confocal imaging of resin after 100 cycles showed that DNA build-up around the outside of the bead was associated with synthetic filter trains, leading to potential mass transfer problems.

Analysis of fouling and breakthrough of process related impurities during depth filtration using confocal microscopy.

Titer improvement has driven process intensification in mAb manufacture. However, this has come with the drawback of high cell densities and associated process related impurities such as cell debris, host cell protein (HCP), and DNA. This affects the capacity of depth filters and can lead to carryover of impurities to protein A chromatography leading to early resin fouling. New depth filter materials provide the opportunity to remove more process related impurities at this early stage in the process. Hence, there is a need to understand the mechanism of impurity removal within these filters. In this work, the secondary depth filter Millistak+ X0HC (cellulose and diatomaceous earth) is compared with the X0SP (synthetic), by examining the breakthrough of DNA and HCP. Additionally, a novel method was developed to image the location of key impurities within the depth filter structure under a confocal microscope. Flux, tested at 75, 100, and 250 LMH was found to affect the maximal throughput based on the max pressure of 30 psi, but no significant changes were seen in the HCP and DNA breakthrough. However, a drop in cell culture viability, from 87% to 37%, lead to the DNA breakthrough at 10% decreasing from 81 to 55 L/m2 for X0HC and from 105 to 47 L/m2 for X0SP. The HCP breakthrough was not affected by cell culture viability or filter type. The X0SP filter has a 30%-50% higher max throughput depending on viability, which can be explained by the confocal imaging where the debris and DNA are distributed differently in the layers of the filter pods, with more of the second tighter layer being utilized in the X0SP.

Assessing the preferred solution conformation of an interacting sense-antisense (complementary) peptide pair.

Sense peptides and corresponding antisense peptides, are capable of making specific interactions. Such interactions may result from inter-peptide side-chain/side-chain contacts or because peptides adopt mutually complementary three-dimensional shapes. Using a combined (1)H NMR spectroscopy/molecular modeling approach to study the interactions between one sense peptide and its corresponding antisense peptide, data are produced that provide clear support for the former hypothesis.

Escherichia coli LysU is a potential surrogate for human lysyl tRNA synthetase in interactions with the C-terminal domain of HIV-1 capsid protein.

Human lysyl-tRNA synthetase (hLysRS) is known to interact directly with human immunodeficiency virus type-1 (HIV-1) GagPol polyproteins, and both hLysRS with tRNA(Lys3) are selectively packaged into emerging HIV-1 viral particles. This packaging process appears to be mediated by contact between the motif 1 helix h7 of hLysRS and the C-terminal dimerization domain of the HIV-1 capsid protein (CA) segment of Gag or GagPol. Given similarities between hLysRS and Escherichia coli (E. coli) heat shock protein LysU, we investigate if LysU might be an hLysRS surrogate for interactions with Gag or GagPol proteins. We report on a series of studies involving three CA C-domains: CA(146) (intact domain), CA(151) (truncated domain), and CA(146)-M185A (M185A, CA dimer interface mutant). After confirming that LysU and CA(146) are dimeric whilst CA(151) and M185A remain monomeric, we use glutathione S-transferase (GST) pull-down assays to demonstrate the existence of specific interactions between LysU and all three CA-C domains. By means of (1)H-NMR titration experiments, we estimate K(d) values of 50 µM for the interaction between LysU and CA(146) or >500 µM for interactions between LysU and CA(151) or LysU and M185A. The reason for these binding affinity differences may be that interactions between LysU and CA(146) take place through dimer-dimer interactions resulting in a α(2)ß(2) heterotetramer. LysU/CA-C protein interactions are weaker than those reported between hLysRS and the Gag, CA or CA(146) proteins, and hLysRS/Gag binding interactions have also been suggested to involve only αß heterodimer formation. Nevertheless, we propose that LysU could act as a surrogate for hLysRS with respect to Gag and GagPol polyprotein interactions although arguably not sufficiently for LysU to act as an inhibitor of the HIV-1 life cycle without further adaptation or mutation. Potentially, LysU and/or LysU mutants could represent a new class of anti-HIV-1 therapeutic agent.

The discovery and optimisation of pyrido[2,3-d]pyrimidine-2,4-diamines as potent and selective inhibitors of mTOR kinase.

We describe a novel series of potent inhibitors of the kinase activity of mTOR. The compounds display good selectivity relative to other PI3K-related kinase family members and, in cellular assays, inhibit both mTORC1 and mTORC2 complexes and exhibit good antiproliferative activity.

Identification of a mechanical rheostat in the hydrophobic core of protein L.

The ability of proteins and their complexes to withstand or respond to mechanical stimuli is vital for cells to maintain their structural organisation, to relay external signals and to facilitate unfolding and remodelling. Force spectroscopy using the atomic force microscope allows the behaviour of single protein molecules under an applied extension to be investigated and their mechanical strength to be quantified. protein L, a simple model protein, displays moderate mechanical strength and is thought to unfold by the shearing of two mechanical sub-domains. Here, we investigate the importance of side-chain packing for the mechanical strength of protein L by measuring the mechanical strength of a series of protein L variants containing single conservative hydrophobic volume deletion mutants. Of the five thermodynamically destabilized variants characterised, only one residue (I60 V) close to the interface between two mechanical sub-domains was found to differ in mechanical properties to wild type (Delta F(I60 V-WT)=-36 pN at 447 nm s(-1), Delta x(uI60V-WT)=0.2 nm). Phi-value analysis of the unfolding data revealed a highly native transition state. To test whether the number of hydrophobic contacts across the mechanical interface does affect the mechanical strength of protein L, we measured the mechanical properties of two further variants. protein L L10F, which increases core packing but does not enhance interfacial contacts, increased mechanical strength by 13+/-11 pN at 447 nm s(-1). By contrast, protein L I60F, which increases both core and cross-interface contacts, increased mechanical strength by 72+/-13 pN at 447 nm s(-1). These data suggest a method by which nature can evolve a varied mechanical response from a limited number of topologies and demonstrate a generic but facile method by which the mechanical strength of proteins can be rationally modified.

Occupational arsine gas exposure.

Arsine gas exposure is a rare occupational event and can be completely prevented with the use of appropriate protective gear. Exposure often occurs when arsine gas is generated while arsenic-containing crude ores or metals are treated with acid. Cases of toxicity require an index of suspicion and a good history. In particular, it should be in the differential diagnosis in patients who present acutely with red/bronze skin and hemoglobinuria. Treatment is supportive and may include transfusions and dialysis in severe cases. Clinical severity is proportionate to the level of exposure, and severity is directly related to the onset of symptoms.