A modular and multi-functional purification strategy that enables a common framework for manufacturing scale integrated and continuous biomanufacturing.

Biopharmaceutical manufacture is transitioning from batch to integrated and continuous biomanufacturing (ICB). The common framework for most ICB, potentially enables a global biomanufacturing ecosystem utilizing modular and multi-function manufacturing equipment. Integrating unit operation hardware and software from multiple suppliers, complex supply chains enabled by multiple customized single-use flow paths, and large volume buffer production/storage make this ICB vision difficult to achieve with commercially available manufacturing equipment. Thus, we developed SymphonX™, a downstream processing skid with advanced buffer management capabilities, a single disposable generic flow path design that provides plug-and-play flexibility across all downstream unit operations and a single interface to reduce operational risk. Designed for multi-product and multi-process cGMP facilities, SymphonX™ can perform stand-alone batch processing or ICB. This study utilized an Apollo™ X CHO-DG44 mAb-expressing cell line in a steady-state perfusion bioreactor, harvesting product continuously with a cell retention device and connected SymphonX™ purification skids. The downstream process used the same chemistry (resins, buffer composition, membrane composition) as our historical batch processing platform, with SymphonX™ in-line conditioning and buffer concentrates. We used surge vessels between unit operations, single-column chromatography (protein A, cation and anion exchange) and two-tank batch virus inactivation. After the first polishing step (cation exchange), we continuously pooled product for 6 days. These 6 day pools were processed in batch-mode from anion exchange to bulk drug substance. This manufacturing scale proof-of-concept ICB produced 0.54 kg/day of drug substance with consistent product quality attributes and demonstrated successful bioburden control for unit-operations undergoing continuous operation.

Dissecting cell death pathways in fed-batch bioreactors.

Chinese hamster ovary (CHO) cells are widely used for production of biologics including therapeutic monoclonal antibodies. Cell death in CHO cells is a significant factor in biopharmaceutical production, impacting both product yield and quality. Apoptosis has previously been described as the major form of cell death occurring in CHO cells in bioreactors. However, these studies were undertaken when less was known about non-apoptotic cell death pathways. Here, we report the occurrence of non-apoptotic cell death in an industrial antibody-producing CHO cell line during fed-batch culture. Under standard conditions, crucial markers of apoptosis were not observed despite a decrease in viability towards the end of the culture; only by increasing stress within the system did we observe caspase activation indicative of apoptosis. In contrast, markers of parthanatos and ferroptosis were observed during standard fed-batch culture, indicating that these non-apoptotic cell death pathways contribute to viability loss under these conditions. These findings pave the way for targeting non-conventional cell death pathways to improve viability and biologic production in CHO cells.

Coupling picodroplet microfluidics with plate imaging for the rapid creation of biomanufacturing suitable cell lines with high probability and improved multi-step assurance of monoclonality.

BACKGROUND: There is an expectation from regulatory agencies that cell lines used in the commercial production of biopharmaceuticals are derived from a single cell progenitor. Traditional methods of single cell cloning include the use of the limiting dilution cloning method which often requires multiple rounds of low cell density cell plating and either microscopic evaluation that wells contain single cells and/or the calculation of a statistically derived probability of monoclonality. METHODS AND RESULTS: We have combined the single cell screening, deposition and picodroplet imaging ability of Sphere Fluidics' Cyto-Mine technology with the plate imaging capability of the Solentim Cell Metric to create a novel workflow for the generation of high producing clonal cell lines with both high probability and assurance of monoclonality. The efficiency of three key stages of the process (single cell picodroplet encapsulation, single picodroplet dispensation and single cell settling in the focal plane of the plate imager) was determined and a probability calculation was derived using the Wilson Score Interval method. The combined probability that a single cell is encapsulated into a picodroplet, is deposited into the correct well of a 96-well plate and that a cell settles into the focal plane of the plate imager yields a combined > 99% probability of monoclonality. Furthermore, visual verification of a single cell progenitor is obtained at multiple steps throughout the cloning workflow. CONCLUSION: This novel methodology for the rapid creation of high quality clonal cell lines for biomanufacturing purposes has many advantages over more traditional approaches including improved assurance of single cell derivation, integrated imaging capability, assay flexibility, equipment utilization time and in-process cell line segregation.

Scale-Down Model Development in ambr systems: An Industrial Perspective.

High-Throughput (HT) technologies such as miniature bioreactors (MBRs) are increasingly employed within the biopharmaceutical manufacturing industry. Traditionally, these technologies have been utilized for discrete screening approaches during pre-clinical development (e.g., cell line selection and process optimization). However, increasing interest is focused towards their use during late clinical phase process characterization studies as a scale-down model (SDM) of the cGMP manufacturing process. In this review, the authors describe a systematic approach toward SDM development in one of the most widely adopted MBRs, the ambr 15 and 250 mL (Sartorius Stedim Biotech) systems. Recent efforts have shown promise in qualifying ambr systems as SDMs to support more efficient, robust and safe biomanufacturing processes. The authors suggest that combinatorial improvements in process understanding (matching of mass transfer and cellular stress between scales through computational fluid dynamics and in vitro analysis), experimental design (advanced risk assessment and statistical design of experiments), and data analysis (combining uni- and multi-variate techniques) will ultimately yield ambr SDMs applicable for future regulatory submissions.

Model-directed engineering of "difficult-to-express" monoclonal antibody production by Chinese hamster ovary cells.

Despite improvements in volumetric titer for monoclonal antibody (MAb) production processes using Chinese hamster ovary (CHO) cells, some "difficult-to-express" (DTE) MAbs inexplicably reach much lower process titers. These DTE MAbs require intensive cell line and process development activity, rendering them more costly or even unsuitable to manufacture. To rapidly and rationally identify an optimal strategy to improve production of DTE MAbs, we have developed an engineering design platform combining high-yielding transient production, empirical modeling of MAb synthesis incorporating an unfolded protein response (UPR) regulatory loop with directed expression and cell engineering approaches. Utilizing a panel of eight IgG1 λ MAbs varying >4-fold in volumetric titer, we showed that MAb-specific limitations on folding and assembly rate functioned to induce a proportionate UPR in host CHO cells with a corresponding reduction in cell growth rate. Derived from comparative empirical modeling of cellular constraints on the production of each MAb we employed two strategies to increase production of DTE MAbs designed to avoid UPR induction through an improvement in the rate/cellular capacity for MAb folding and assembly reactions. Firstly, we altered the transfected LC:HC gene ratio and secondly, we co-expressed a variety of molecular chaperones, foldases or UPR transactivators (BiP, CypB, PDI, and active forms of ATF6 and XBP1) with recombinant MAbs. DTE MAb production was significantly improved by both strategies, although the mode of action was dependent upon the approach employed. Increased LC:HC ratio or CypB co-expression improved cell growth with no effect on qP. In contrast, BiP, ATF6c and XBP1s co-expression increased qP and reduced cell growth. This study demonstrates that expression-engineering strategies to improve production of DTE proteins in mammalian cells should be product specific, and based on rapid predictive tools to assess the relative impact of different engineering interventions.

Predicting the expression of recombinant monoclonal antibodies in Chinese hamster ovary cells based on sequence features of the CDR3 domain.

Despite the development of high-titer bioprocesses capable of producing >10 g L(-1) of recombinant monoclonal antibody (MAb), some so called "difficult-to-express" (DTE) MAbs only reach much lower process titers. For widely utilized "platform" processes the only discrete variable is the protein coding sequence of the recombinant product. However, there has been little systematic study to identify the sequence parameters that affect expression. This information is vital, as it would allow us to rationally design genetic sequence and engineering strategies for optimal bioprocessing. We have therefore developed a new computational tool that enables prediction of MAb titer in Chinese hamster ovary (CHO) cells based on the recombinant coding sequence of the expressed MAb. Model construction utilized a panel of MAbs, which following a 10-day fed-batch transient production process varied in titer 5.6-fold, allowing analysis of the sequence features that impact expression over a range of high and low MAb productivity. The model identified 18 light chain (LC)-specific sequence features within complementarity determining region 3 (CDR3) capable of predicting MAb titer with a root mean square error of 0.585 relative expression units. Furthermore, we identify that CDR3 variation influences the rate of LC-HC dimerization during MAb synthesis, which could be exploited to improve the production of DTE MAb variants via increasing the transfected LC:HC gene ratio. Taken together these data suggest that engineering intervention strategies to improve the expression of DTE recombinant products can be rationally implemented based on an identification of the sequence motifs that render a recombinant product DTE.

Impact of gene vector design on the control of recombinant monoclonal antibody production by Chinese hamster ovary cells.

In this study, we systematically compare two vector design strategies for recombinant monoclonal antibody (Mab) synthesis by Chinese hamster ovary (CHO) cells; a dual open reading frame (ORF) expression vector utilizing separate cytomegalovirus (CMV) promoters to drive heavy chain (HC) and light chain (LC) expression independently, and a single ORF vector design employing a single CMV promoter to drive HC and LC polypeptide expression joined by a foot and mouth disease virus F2A polypeptide self-cleaving linker sequence. Initial analysis of stable transfectants showed that transfectants utilizing the single ORF vector designs exhibited significantly reduced Mab production. We employed an empirical modeling strategy to quantitatively describe the cellular constraints on recombinant Mab synthesis in all stable transfectants. In all transfectants, an intracellular molar excess of LC polypeptide over HC polypeptide was observed. For CHO cells transfected with the single ORF vectors, model-predicted, and empirical intracellular intermediate levels could only be reconciled by inclusion of nascent HC polypeptide degradation. Whilst a local sensitivity analysis showed that qMab of all transfectants was primarily constrained by recombinant mRNA translation rate, our data indicated that all single ORF transfectants exhibited a reduced level of recombinant gene transcription and that Mab folding and assembly reactions generically exerted greater control over qMab. We infer that the productivity of single ORF transfectants is limited by ER processing/degradation "capacity" which sets a limit on transcriptional input. We conclude that gene vector design for oligomeric recombinant proteins should be based on an understanding of protein-specific synthetic kinetics rather than polypeptide stoichiometry.

An empirical modeling platform to evaluate the relative control discrete CHO cell synthetic processes exert over recombinant monoclonal antibody production process titer.

In this study we have combined empirically derived mathematical models of intracellular Mab synthesis to quantitatively compare the degree to which individual cellular processes limit recombinant IgG(4) monoclonal antibody production by GS-CHO cells throughout a state-of-the-art industrial fed-batch culture process. Based on the calculation of a production process control coefficient for each stage of the intracellular Mab synthesis and secretion pathway, we identified the major cellular restrictions on Mab production throughout the entire culture process to be recombinant heavy chain gene transcription and heavy chain mRNA translation. Surprisingly, despite a substantial decline in the rate of cellular biomass synthesis during culture, with a concomitant decline in the calculated rate constants for energy-intensive Mab synthetic processes (Mab folding/assembly and secretion), these did not exert significant control of Mab synthesis at any stage of production. Instead, cell-specific Mab production was maintained by increased Mab gene transcription which offset the decline in cellular biosynthetic rates. Importantly, this study shows that application of this whole-process predictive modeling strategy should rationally precede and inform cell engineering approaches to increase production of a recombinant protein by a mammalian host cell--where control of productivity is inherently protein product and cell line specific.

Cell line-specific control of recombinant monoclonal antibody production by CHO cells.

In this study we compare the cellular control of recombinant human IgG(4) monoclonal antibody (Mab) synthesis in different CHO cell lines. Based on comprehensive empirical analyses of mRNA and polypeptide synthetic intermediates we constructed cell line-specific mathematical models of recombinant Mab manufacture in seven GS-CHO cell lines varying in specific production rate (qMab) over 350-fold. This comparative analysis revealed that control of qMab involved both genetic construct and cell line-specific factors. With respect to the former, all cell lines exhibited excess production of light chain (LC) mRNA and polypeptide relative to heavy chain (HC) mediated by more rapid LC transcription and enhanced LC mRNA stability. Downstream of this, cell lines differed markedly in their relative rates of recombinant mRNA translation, Mab assembly and secretion although HC mRNA abundance and the rate of HC translation generally exerted most control over qMab--the latter being directly proportional to qMab. This study shows that (i) cell lines capable of high qMab exceed a threshold functional competency in all synthetic processes, (ii) the majority of cells in parental and transfected cell populations are functionally limited and (iii) cell engineering strategies to increase Mab production should be cell line specific.