Influence of Hazelnut and Walnut Oil Cakes Powder on Thermal and Rheological Properties of Wheat Flour.

The aim of the study was to assess the influence of the addition of powdery hazelnut oil cakes (HOC) or walnut oil cakes (WOC) to wheat flour (WF) on its selected thermal and rheological properties. In the research material, part of the wheat flour (5%, 10%, 15%) was substituted with powdery oil cakes based on hazelnuts and walnuts. The control sample was wheat flour (100% WF). In the tested systems with the addition of hazelnut oil cakes (WFHOC) and walnuts (WFWOC), the characteristics of the gelatinization and retrogradation processes were determined using the DSC method, the gelatinization characteristics of 10% pastes using the RVA method, flow curves and viscosity curves, as well as mechanical spectra. Based on the results obtained, it was found that the type of oil cakes and the level of their addition significantly influenced the thermal and rheological properties of the tested systems. Partial replacement of wheat flour with HOC or WOC significantly influenced most DSC parameters. The highest values of gelatinization enthalpy ∆HG and retrogradation ∆HR were characteristic of the WFWOC5% sample (5.9 J/g) and the control sample (1.3 J/g), respectively. All tested systems showed the properties of shear-thinning non-Newtonian fluids, and the partial replacement of wheat flour with HOC or WOC resulted in a significant reduction in the maximum viscosity of pastes, increasing with the increase in the proportion of oil cakes. WFHOC-based pastes were characterized by higher values of the G' and G″ modulus, while their values and the values of the K' and K″ parameters decreased as the share of oil cakes increased. Gels based on all tested systems showed the nature of weak gels (tan δ = G″/G' > 0.1). Replacing part of the wheat flour with nut oil cakes modified the thermal and rheological properties of pastes and gels, and the observed changes were influenced by both the origin and the level of addition of powdered oil cakes. It was found that WFHOC/WFWOC15% systems had reduced viscosity and weakened viscoelastic properties compared to systems with a lower OC content, which is not a favorable feature from the technological point of view. However, these systems were the most stable, which is an advantageous feature. However, for baking purposes, research should be carried out on the rheological properties of dough made from these mixtures.

Influence of the Addition of Vital Wheat Gluten on Thermal and Rheological Properties of Triticale Flour.

The aim of this study was to evaluate the effect of the addition of vital wheat gluten to triticale flour on its thermal and rheological properties. In the tested systems (TG), triticale flour from Belcanto grain was replaced with vital wheat gluten in the amounts of 1%, 2%, 3%, 4% and 5%. Wheat flour (WF) and triticale flour (TF) were also tested. For the tested flours and mixtures with gluten, the falling number, gluten content, as well as the parameters of gelatinization and retrogradation characteristics using differential scanning calorimetry (DSC) and characteristics of pasting using a viscosity analyzer (RVA) were determined. In addition, viscosity curves were plotted, and viscoelastic properties of the obtained gels were also assessed. It was observed that there were no statistically significant differences between the TF and TG samples in terms of falling number. The average value of this parameter in TG samples was 317 s. It was found that the replacement of TF with vital gluten reduced the gelatinization enthalpy and increased the retrogradation enthalpy, as well as the degree of retrogradation. The highest viscosity was characterized by the WF paste (1784 mPa·s) and the lowest by the TG5% mixture (1536 mPa·s). Replacing TF with gluten resulted in a very visible decrease in the apparent viscosity of the systems. In addition, the gels based on the tested flours and TG systems had the character of weak gels (tan δ = G″/G' > 0.1), while the values of the parameters G' and G″ decreased as the share of gluten in the systems increased.

Chemical Profiling, Bioactive Properties, and Anticancer and Antimicrobial Potential of Juglans regia L. Leaves.

The aim of this study was to assess the biological potential of the polyphenolic fraction isolated from J. regia leaves, collected in the Subcarpathian region (Poland). The phenolic profile was determined using the UPLC-PDA-MS/MS method. Biological activity was determined by evaluating the antioxidant, anticancer, antibacterial, and antifungal effects. Prior to this study, the purified polyphenolic fraction was not been tested in this regard. A total of 40 phenolic compounds (104.28 mg/g dw) were identified, with quercetin 3-O-glucoside and quercetin pentosides dominating. The preparation was characterized by a high ability to chelate iron ions and capture O2•- and OH• radicals (reaching IC50 values of 388.61, 67.78 and 193.29 µg/mL, respectively). As for the anticancer activity, among the six tested cell lines, the preparation reduced the viability of the DLD-1, Caco-2, and MCF-7 lines the most, while in the antibacterial activity, among the seven tested strains, the highest susceptibility has been demonstrated against K. pneumoniae, S. pyogenes, and S. aureus. Depending on the needs, such a preparation can be widely used in the design of functional food and/or the cosmetics industry.

Selected Physicochemical, Thermal, and Rheological Properties of Barley Starch Depending on the Type of Soil and Fertilization with Ash from Biomass Combustion.

The following study analyzed the impact of fertilizing barley with fly ash from biomass combustion grown on two types of soil, Haplic Luvisol (HL) and Gleyic Chernozem (GC), on the properties of starch. The experiment was conducted in 2019 (A) and 2020 (B), and barley was fertilized with ash doses (D1-D6) differing in mineral content. In the tested barley starch samples, the amylose content, the clarity of the paste, and the content of selected minerals were determined. The thermodynamic characteristics of gelatinization and retrogradation were determined using the DSC method. Pasting characteristics, flow curves, and viscoelastic properties of starch pastes were performed. Starches differed in amylose content and paste clarity. The highest gelatinization and retrogradation enthalpy (ΔHG and ΔHR) values were recorded for samples GCD1A and HLD5B. None of the tested factors significantly affected the pasting temperature (PT), but they had a significant impact on the remaining parameters of the pasting characteristics. The average PT value of barley starches was 90.9 °C. However, GCD2A starch had the highest maximum viscosity and the highest rheological stability during heating. GCD2A paste was characterized by the highest apparent viscosity. It was shown that all pastes showed non-Newtonian flow and shear-thinning and had a predominance of elastic features over viscous ones. The resulting gels had the characteristics of weak gels. Ash from burning wood biomass is an innovative alternative to mineral fertilizers. It was shown that the use of such soil fertilization influenced the properties of barley starch.

Rheological Characteristics of Wheat Dough Containing Powdered Hazelnuts or Walnuts Oil Cakes.

This study assessed edible oil industry byproducts, oil cakes (OC) based on hazelnuts and walnuts (HOC, WOC), to replace wheat flour dough (WD) based on farinograph and extensograph parameters and rheological measurements. The research hypothesis of this work is that replacing part of wheat flour with ground nut oil cakes modifies the rheological characteristics of the dough. WF was replaced at the level of 5%, 10% and 15%. It was shown that use of OC in flour mixtures at various levels significantly influenced the rheological properties of the dough. The water absorption of wheat flour and oil cake mixtures was higher than that of the control sample, and the average value of this indicator was 53.4%. The control sample had the lowest dough development time (DDT), and the presence of HOC or WOC in the system resulted in a significant increase in this parameter (p < 0.05). The average DDT of WDHOC cakes was 4.7 min and was lower compared to WDWOC which was 5.9 min. The WDWOC10% and WDWOC15% samples were characterized by the highest dough stability value and the lowest degree of softening (p < 0.05). The presence of OC in the flour mixtures increased the values of the storage and loss moduli, which was reflected in the K' and K″ values. The values of these parameters also increased as the level of OC addition increased. WDHOC doughs were characterized by higher values of the K' and K″ parameters compared to WDWOC. The results of the creep and recovery test showed that the dough with the addition of nut OC was less susceptible to deformation compared to the control dough (p < 0.05). The resistance to deformation increased with the increasing share of HOC or WOC in the mixtures. The average value of viscoelastic compliance (J1) of this parameter for WDHOC dough was on average 1.8 × 10-4 Pa-1, and for WDWOC 2.0 × 10-4 Pa-1. Nut oil cakes are an interesting technological addition to the dough. Their use may have a positive impact on the characteristics of the finished product and expand their application possibilities in the food industry. This is because the dough with the addition of nut cakes was more stiff and less flexible and susceptible to deformation.

Walnut Male Flowers (Juglans regia L.) as a Functional Addition to Wheat Bread.

The aim of this study is to assess the effect of adding dried and ground walnut male flowers to wheat flour on selected physicochemical and antioxidant properties of the obtained wheat bread. The control sample was bread without the addition of walnut male flowers. In the tests, the addition of flowers was used in the amounts of 0.5%, 1.0%, 1.5%, 2.0% and 2.5% of the weight of the flour used in the control sample. Bread dough was prepared according to the direct method with the use of yeast. The parameters of the baking process of the control bread and of the test bread were calculated. The selected parameters determining the quality of the obtained bread, including the loaf volume, the specific volume, the crumb porosity, the crumb texture and the color were measured. The antioxidant potential and total polyphenol content were tested both in the dough and in the bread. The test results were analyzed statistically. It was found that the partial replacement of wheat flour with walnut male flowers resulted in a significant reduction in the loaves' volume and in the darkening of both the color of the dough and the crumb. The value of the L* parameter decreased with the increasing addition of walnut flowers. The lowest values of this parameter were found to be 53.87 (crust) and 39.94 (crumb) in the sample with 2.5% addition. The average volume of the loaves ranged from 565 cm3 (0.5%) to 675 cm3 (control). The use of the additive in the amount of 2.5% caused significant changes in the values of most of the examined parameters of the bread crumb texture. The addition of walnut male flowers to the flour had a significant effect on the antioxidant potential and the total polyphenol content of the tested doughs and breads. In the case of bread, the total polyphenol content value ranged from 96.90 mg GAE/g dw to 208.08 mg GAE/g dw. Similarly, the antioxidant potential increased with increasing walnut male flower supplementation. The antioxidant potential determined by the ABTS and FRAP methods ranged from 1.42 mmol TE/g dw to 2.02 mmol TE/g dw and from 0.08 mmol TE/g dw to 0.33 mmol TE/g dw, respectively. The obtained research results prove the application potential of walnut flowers in the design of food, with beneficial pro-health properties, and are an example of the use of plant by-products in the process of food enrichment.

Quality Characteristics of Novel Pasta Enriched with Non-Extruded and Extruded Blackcurrant Pomace.

Fruit pomace is a valuable by-product in terms of its chemical composition, which potential might be used through transformation of the pomace into food ingredients. The aim of this work was to assess the effect of partial (5% and 10%) substitution of powdered non-extruded or extruded blackcurrant pomace for semolina in pasta formula on nutritional and technological properties of the final product. The pasta was assessed for chemical composition, DPPH antiradical activity, color, cooking and textural properties. Presence of the by-products in the pasta resulted in increased total dietary fiber content (from 1.89 ± 0.06 up to 10.03 ± 0.15 g/100 g, dwb), fat content (from 1.29 ± 0.01 up to 2.70 ± 0.05 g/100 g, dwb) and DPPH antiradical activity (from 253 ± 15 up to 1037 ± 7 µmol TE/g, dwb), as well as in significantly different color (p < 0.05) as compared to the semolina-only pasta. The optimal cooking time was shortened by 1.0−1.5 min and by 2.0 min in the case of the lower and higher, respectively, level of pasta supplementation. The water absorption decreased by up to 32% in the enriched pasta. In general, the cooking loss remained unchanged. The uncooked product containing the extruded fruit pomace was characterized by significantly higher breaking strength (p < 0.05) as compared to the standard pasta. Presence of the pomace also affected texture of the cooked pasta, increasing its firmness and hardness and, when using the non-extruded pomace, the tensile strength. In our research, we have shown that durum wheat pasta enriched with 5 or 10% of powdered blackcurrant pomace or their extrudates constitute a food product of improved nutritional value and of appropriate textural characteristics, while maintaining culinary properties that meet pasta industry requirements.

Phytochemical Screening and Bioactive Properties of Juglans regia L. Pollen.

Pollen is one of the major by-products of the walnut tree, yet it is poorly investigated. Thus, the aim of this study was to investigate the total phenolics, flavonoids, antioxidant, anticancer potential, and polyphenol profile of pollen obtained from male Juglans regia flowers. A total of 24 phenolic compounds were identified in Juglans regia pollen and all of them were reported for the first time for this raw material. The content of polyphenols was 408.03 mg/100 g dry weight (dw) and the most abundant components were quercetin 3-O-sophoroside and 4',5,7-trihydroxy-3,6-dimethoxyflavone-7-O-beta-D-glucoside. The concentration of these compounds, as well as the total content of polyphenols and flavonoids, strongly determined the antioxidant and cytotoxic activity of Juglans regia pollen. Antioxidant action using the ABTS and CUPRAC methods had the values of 3.35 and 0.32 mmol TE/g dw, respectively. In turn, in the tests of chelating ability of ferrous ion, O2•- and OH- radical scavenging activity, of which the results were expressed as IC50, the values were equal to 335.01, 459.31, and 92.89 µg/mL, respectively. Among the six cancer cell lines, the strongest effect was demonstrated for Caco-2 (140.65 µg/mL) and MCF-7 (140.98 µg/mL) cells. The results provide valuable and previously unpublished data on the polyphenol composition and biological potential of Juglans regia pollen.

Effect of Soil Type and Application of Ecological Fertilizer Composed of Ash from Biomass Combustion on Selected Physicochemical, Thermal, and Rheological Properties of Potato Starch.

The aim of the study was to assess the effect of soil type and the application of fertilizer composed of ashes from biomass combustion to potatoes on selected physicochemical, rheological, and thermal properties of potato starches isolated by using the laboratory method. Potatoes were grown in Haplic Luvisol (HL) and Gleyic Chernozem (GC) soil and fertilized with different doses of biomass combustion ash (D1−D6) with different mineral contents. The thermodynamic characteristics of gelatinization and retrogradation were identified by DSC. The analyses of rheological properties included the determination of the gelatinization characteristics by using the RVA method, flow curves, and assessment of the viscoelastic properties of starch gels. It was found that the starches tested contained from 24.7 to 29.7 g/100 g d.m. amylose, and the clarity of 1% starch pastes ranged from 59% to 68%. The gelatinization characteristics that were determined showed statistically significant differences between the starches analyzed in terms of the tested factors. The value of maximum viscosity and final viscosity varied, respectively, in the range of 2017−2404 mPa·s and 2811−3112 mPa·s, respectively. The samples of the potato starches studied showed a non-Newtonian flow, shear thinning, and the phenomenon of thixotropy. After cooling, the starch gels showed different viscoelastic properties, all of which were weak gels (tan δ = G″/G' > 0.1).

Phenolic Profile and Antioxidant, Antibacterial, and Antiproliferative Activity of Juglans regia L. Male Flowers.

Juglans regia L., walnut, is a large, long-living tree, cultivated in temperate climates around the world. It is highly appreciated for its nutritional kernels and high-quality timber. Its barks, leaves, and husk are used as dyes and in folk medicine as herbal remedies for several diseases. From a biological and chemical standpoint, relatively little is known about the male flowers of the tree. Therefore, the aim of the study was to evaluate the phenolic profile as well as in vitro antioxidant, antimicrobial, and antiproliferative activity of male Juglans regia L. flowers. Phenolic content was determined by UPLC/PDA/MS/MS analyses; antioxidant activity was assessed by five different methods; antimicrobial activity was evaluated against the six most common pathogenic strains of Gram-positive and Gram-negative bacteria, and antiproliferative properties were assessed against six cell lines. Most of the analyses carried out in this study were performed for the first time for this raw material. J. regia flower extract was characterized by a strong ability to scavenge DPPH˙ free radicals, hydroxyl radicals, and chelating metal ions. Among the examined bacterial strains and neoplastic lines, the strongest antimicrobial activity was shown against S. aureus, L. monocytogenes, and B. cereus, and cytotoxic activity against breast cancer, glioblastoma, and astrocytoma cells. Male J. regia flowers have also been found to be a rich source of phenolic compounds. The content of polyphenols in the extract was 4369.73 mg/100 g d.w., and 24 compounds from the group of flavonoids, phenolic acids, and juglunosides were identified. Additionally, a strong correlation between the content of polyphenols and the antioxidant capacity and cytotoxic activity was observed. This is why the tested J. regia flowers are an excellent source of effective natural antioxidant, antibacterial, and chemopreventive compounds that have potential to be used in the pharmaceutical or food industries.

The Effect of the Addition of Hazelnut or Walnut Flour on the Rheological Characteristics of Wheat Dough.

The aim of this study was to evaluate the effect of the addition of hazelnut or walnut flour on the rheological properties of flour and wheat dough (WD). The research material was a system in which wheat flour was replaced with flour based on hazelnuts (HF) or walnuts (WF), i.e., nut flour, in the amounts of 5%, 10% and 15% (WDH, WDW). As a part of the research methodology, we analysed the wet gluten content, and farinographic and extensographic analyses of the dough were performed. Sweep frequency, creep and recovery tests were used to assess the viscoelastic properties of the tested doughs. It was found that the doughs with the addition of walnuts were characterized by different rheological properties compared to the control sample. The systems in which wheat flour was replaced with nuts were characterized by lower water absorption, and this parameter decreased as the share of nuts in the system increased. The mean value of this parameter for WDH was 48.6%, and in the case of WDW it was 47.9%. The development times of WDH and WDW doughs were longer compared to the control, but they decreased as the addition of nut flour was increased. The WDH doughs were characterized by the lowest stability and the highest degree of softening among the examined doughs. It was shown that the addition of nut flour reduced the values of the storage (G') and loss (G″) modules characterizing the tested doughs, while in each case the G' value was greater than the G″ value, which proves the advantage of the elastic properties. The creep and recovery tests showed that the nut dough was more susceptible to deformation compared to the control, which indicates that the presence of nut flour weakens the formation of the gluten network forming the dough structure, and makes it more susceptible to stress.

The Influence of the Addition of Nuts on the Thermal and Rheological Properties of Wheat Flour.

The aim of the study was to assess the influence of replacing wheat flour with hazelnuts or walnuts, in various amounts, on the thermal and rheological properties of the obtained systems. The research material were systems in which wheat flour was replaced with ground hazelnuts (H) or walnuts (W) in the amount of 5%, 10%, and 15%. The parameters of the thermodynamic gelatinization characteristics were determined by the differential scanning calorimetry method. In addition, the pasting characteristics were determined with the use of a viscosity analyzer and the viscoelastic properties were assessed. Sweep frequency and creep and recovery tests were used to assess the viscoelastic properties of the tested gels. It was found that replacing wheat flour with nuts increased the values of gelatinization temperature, gelatinization, and retrogradation enthalpy, and the degree of retrogradation. The highest viscosity was characteristic of the control sample (2039 mPa·s), and the lowest for the paste with 15% addition of walnuts (1120 mPa·s). Replacing the flour with nuts resulted in a very visible reduction in the viscosity of such systems. In addition, gels based on the systems with the addition of H and W were weak gels (tan δ = G″/G' > 0.1), and the values of G' and G″ parameters decreased with the increased share of nuts in the systems. Creep and recovery analysis indicated that the systems in which wheat flour was replaced with hazelnuts were less susceptible to deformation compared to the systems with the addition of W.

Physicochemical and Antioxidant Properties of Wheat Bread Enriched with Hazelnuts and Walnuts.

The aim of this study was to evaluate the effect of wheat bread enrichment using hazelnuts and walnuts (1%, 3%, 6%, 9%) on the nutritional value and selected physicochemical and antioxidant properties. The dough and bread yield, volume, specific volume and porosity were also determined. The crumb texture was analyzed by texture profile analysis (TPA) test using a texture meter. The color of the crumb was assessed in the CIE L*a*b* color space. Antioxidant properties were determined by the ABTS+ radical method. The contents of phenolic acids, flavonoids and total polyphenols were also determined. The test demonstrated that the enrichment of bread with nuts increased the level of minerals, protein, fiber and fat. Breads containing walnuts were characterized by the highest content of these nutrients. The bread with a 9% walnut content by the smallest volume (380 cm3) had lowest value of L*. The crumb of the enriched breads was characterized by greater hardness, gumminess and chewiness, the values of these parameters generally increasing in parallel to the nut content. Breads enriched with walnuts were characterized by a higher average total content of polyphenols (35.77 mg gallic acid equivalent (GAE)/100 g dry mass (DM)) compared to the breads enriched with walnuts (25.35 mg GAE/100 g DM).

Changes in Antioxidant Activity, Profile, and Content of Polyphenols and Tocopherols in Common Hazel Seed (Corylus avellana L.) Depending on Variety and Harvest Date.

The aim of the study was to evaluate the influence of variety and the date of harvest of hazelnut seeds on their antioxidant potential and the profile and content of polyphenols and tocopherols. The research material included the hazelnut seeds of six varieties, harvested from July to September at equal 30-day intervals. Hazelnuts were analyzed for total fat content and antioxidant properties, whereby UPLC-PDA-ESI-MS analysis was used to determine the profile and content of polyphenols, and the HPLC method to determine the content of tocopherols. It was found that the content of fat and tocopherols in nuts increased with the ripening of the nuts. The highest fat content was found in walnut seeds of the Katalonski variety (September) and tocopherols in walnut seeds of the Olbrzym z Halle variety (177.67 mg/kg d.m.). In turn, antioxidant properties and total polyphenols content decreased with the later harvest date. The strongest antioxidant potential was found in the case of Cosford nuts harvested in July (66.93 mmol TE/100 g d.m.). These nuts were also characterized by the highest total polyphenol content (1704.9 mg/100 g d.m.). UPLC-MS analysis allowed the identification of 15 polyphenolic compounds such as phenolic acids, catechins and ellagic acid hexoside in nut seeds.

Impact of the Degree of Maturity of Walnuts (Juglans regia L.) and Their Variety on the Antioxidant Potential and the Content of Tocopherols and Polyphenols.

The aim of the study was to characterize the antioxidant properties; establish the profile of polyphenolic compounds and evaluate the content of tocopherols in walnuts of three varieties (Leopold; Apollo; Resovia) differing in the degree of maturity (harvest date). The profile of polyphenolic compounds was established by UPLC-PDA-ESI-MS. The content of tocopherols was determined by HPLC-FLD. It was found that the content of dry matter and fat increased and the antioxidant properties decreased with the maturation of nuts. Walnuts of the Leopold cultivar harvested in July exhibited the highest content of total polyphenol (2149.08 mg/100 g dry mass). In their polyphenolic profile; 26 compounds were identified; mainly belonging to the class of ellagitannins. The polyphenolic content decreased with the maturation of nuts. The total content of tocopherols in the tested nuts increased with ripening and ranged from 1.76 mg/100g (Apollo VII) to 18.30 mg/100g (Resovia IX).

The Influence of Chemically Modified Potato Maltodextrins on Stability and Rheological Properties of Model Oil-in-Water Emulsions.

The aim of this study was to determine the effect of the maltodextrins prepared from chemically modified starches (crosslinked, stabilized, crosslinked and stabilized) on the stability and rheological properties of model oil-in-water (o/w) emulsions. Based on the obtained results, it was concluded that emulsion stability depended on hydrolysates dextrose equivalent (DE) value. Maltodextrin with the lowest degree of depolymerization effectively stabilized the dispersed system, and the effectiveness of this action depended on the maltodextrin type and concentration. Addition of distarch phosphate-based maltodextrin stabilized emulsion at the lowest applied concentration, and the least effective was maltodextrin prepared from acetylated starch. Emulsions stabilized by maltodextrins (DE 6) prepared from distarch phosphate and acetylated distarch adipate showed the predominance of the elastic properties over the viscous ones. Only emulsion stabilized by maltodextrin prepared from distarch phosphate (E1412) revealed the properties of strong gel. Additionally, the decrease in emulsions G' and G″ moduli values, combined with an increase in the value of DE maltodextrins, was observed.

Maltodextrins from chemically modified starches. Selected physicochemical properties.

The aim of this work was to evaluate the effect of chemical modification of starch (cross-linking and/or stabilisation) on selected rheological and functional properties of maltodextrins of dextrose equivalent of 6, 11 and 16. It was found that values of glass transition temperatures were decreasing with dextrose equivalent of maltodextrin. The highest values of glass transition temperature (TG) were determined for maltodextrin of DE 6-obtained from distarch phosphate and acetylated distarch phosphate. Increase in DE value of maltodextrin was also accompanied by decrease and increase in values of intrinsic viscosity and the critical concentration, respectively; however, there was no significant effect of kind of chemical modification of starch on the values of these parameters. Maltodextrin solutions at concentrations of from 10 to 70 % exhibited Newtonian flow behaviour. In the case of 50% solutions of maltodextrins of DE 6 the highest viscosity was produced by maltodextrin from native potato starch, while the lowest one by maltodextrin from acetylated starch. On the other hand, among the maltodextrin of DE 11 this one produced from acetylated starch showed the highest viscosity. All the maltodextrins exhibited surfactant properties in a water-air system, with the strongest effect observed for maltodextrins produced from double chemically modified starches and from acetylated starch. The surface activity was increasing with increasing of the DE value of maltodextrin. Moreover, values of surface tension were decreasing with increasing in maltodextrin concentration in the system.

Physicochemical, thermal and rheological properties of starches isolated from malting barley varieties.

The aim of this work was to characterize physicochemical, thermal and rheological properties of starches isolated from malting barley varieties. The analyzed starches contained 19.6-25.2 g of amylose, 42.47-70.67 mg of phosphorus, 0.50-1.26 g of protein and 0.10-0.61 g of fat per 100 g of starch dry mass. The clarity of the 1 % (w/w) starch pastes ranged from 5.4 to 9.8 %. Values of the characteristic gelatinization temperatures were in the ranges of 56.5-58.5 °C, 61.2-63.0 °C and 66.7-68.7 °C, respectively for TO, TP and TE, whereas values of gelatinization enthalpy were from 6.49 to 9.61 J/g. The barley starches showed various tendency to retrogradation, from 24.52 to 44.22 %, measured as R = ∆HR/∆HG value. The pasting curves showed differences in pasting characteristics of the barley starches, where values of peak (PV) and final (FV) viscosities were 133-230 mPa·s and 224-411 mPa·s, respectively. The barley starch pastes exhibited non-Newtonian, shear thinning flow behaviour and thixotropy phenomenon. After cooling the starch gels showed different viscoelastic properties, however, most of them behaved like weak gels (tan δ = G″/G' > 0.1). Significant linear correlations between the parameters of pasting characteristic and some rheological parameters were found.