Surface Atomic Arrangement of Aluminum Ultra-Thin Layers Grown on Si(111).

Surface atomic arrangement and physical properties of aluminum ultrathin layers on c-Si(111)-7 × 7 and hydrogen-terminated c-Si(111)-1 × 1 surfaces deposited using molecular beam epitaxy were investigated. X-ray photoelectron spectroscopy spectra were collected in two configurations (take-off angle of 0° and 45°) to precisely determine the surface species. Moreover, 3D atomic force microscopy (AFM) images of the air-exposed samples were acquired to investigate the clustering formations in film structure. The deposition of the Al layers was monitored in situ using a reflection high-energy electron diffraction (RHEED) experiments to confirm the surface crystalline structure of the c-Si(111). The analysis of the RHEED patterns during the growth process suggests the settlement of aluminum atoms in Al(111)-1 × 1 clustered formations on both types of surfaces. The surface electrical conductivity in both configurations was tested against atmospheric oxidation. The results indicate differences in conductivity based on the formation of various alloys on the surface.

Computational and experimental characterizations of annealed Cu2ZnSnS4 thin films.

We report on the synthesis and characterization of Cu2ZnSnS4 (CZTS) thin films prepared at different annealing temperatures using the sol-gel method and deposited on glass substrates using the immersing method. The XRD analysis demonstrates that the films annealed at 450 °C exhibit the most stable tetrahedral kesterite structure. Computationally, the Vienna ab initio simulation package (VASP) has been implemented to calculate critical structural properties of as-prepared CZTS) thin films and compared with those extracted from the XRD patterns. An excellent agreement is obtained between the calculated and measured structural parameters. Optical measurement of key optical parameters of annealed CZTS thin films shows a drastic manipulation of all-optical properties compared to the as-prepared thin films. In particular, an optical band gap of 1.62 eV obtained for annealed CZTS thin films at 450 °C makes them eligible to be potential candidates for thin film-based high-efficiency solar cells. Calculations of elastic properties of annealed thin films reveal that crystallite size increases and microstrain decrease compared with those of as-prepared thin films. The sheet resistance of annealed CZTS thin films exhibits a significant decline as the annealing temperature is increased. The electrical properties of annealed CZTS thin films could match some conductors. Remarkably, at 450 °C annealing temperature, the sheet resistance decreases to 74 Ω.cm-1 indicating the possibility of using the annealed CZTS thin films for efficient and low cost solar cell applications.

Synthesis, Optical, Chemical and Thermal Characterizations of PMMA-PS/CeO2 Nanoparticles Thin Film.

We report the synthesis of hybrid thin films based on polymethyl methacrylate) (PMMA) and polystyrene (PS) doped with 1%, 3%, 5%, and 7% of cerium dioxide nanoparticles (CeO2 NPs). The As-prepared thin films of (PMMA-PS) incorporated with CeO2 NPs are deposited on a glass substrate. The transmittance T% (λ) and reflectance R% (λ) of PMMA-PS/CeO2 NPs thin films are measured at room temperature in the spectral range (250-700) nm. High transmittance of 87% is observed in the low-energy regions. However, transmittance decreases sharply to a vanishing value in the high-energy region. In addition, as the CeO2 NPs concentration is increased, a red shift of the absorption edge is clearly observed suggesting a considerable decrease in the band gap energy of PMMA-PS/CeO2 NPs thin film. The optical constants (n and k) and related key optical and optoelectronic parameters of PMMA-PS/Ce NPs thin films are reported and interpreted. Furthermore, Tauc and Urbach models are employed to elucidate optical behavior and calculate the band gaps of the as-synthesized nanocomposite thin films. The optical band gap energy of PMMA-PS thin film is found to be 4.03 eV. Optical band gap engineering is found to be possible upon introducing CeO2 NPs into PMMA-PS polymeric thin films as demonstrated clearly by the continuous decrease of optical band gap upon increasing CeO2 content. Fourier-transform infrared spectroscopy (FTIR) analysis is conducted to identify the major vibrational modes of the nanocomposite. The peak at 541.42 cm-1 is assigned to Ce-O and indicates the incorporation of CeO2 NPs into the copolymers matrices. There were drastic changes to the width and intensity of the vibrational bands of PMMA-PS upon addition of CeO2 NPs. To examine the chemical and thermal stability, thermogravimetric (TGA) thermograms are measured. We found that (PMMA-PVA)/CeO2 NPs nanocomposite thin films are thermally stable below 110 °C. Therefore, they could be key candidate materials for a wide range of scaled multifunctional smart optical and optoelectronic devices.

Effect of Iodine Filler on Photoisomerization Kinetics of Photo-Switchable Thin Films Based on PEO-BDK-MR.

We report the effect of an iodine filler on photoisomerization kinetics of photo-switchable PEO-BDK-MR thin films. The kinetics of photoisomerization and time progression of PEO-BDK-MR/I2 nanocomposite thin films are investigated using UV-Vis, FTIR spectroscopies, and modified mathematical models developed using new analytical methods. Incorporating iodine filler into the PEO-BDK-MR polymeric matrix enhances the isomerization energy barrier and considerably increases the processing time. Our outcomes propose that enhanced photoisomerized and time processed (PEO-BDK-MR)/I2 thin films could be potential candidates for a variety of applications involving molecular solar thermal energy storage media.

Kinematics of Photoisomerization Processes of PMMA-BDK-MR Polymer Composite Thin Films.

We investigate and report on the kinematics of photoisomerization processes of polymer composite thin films based on azo dye methyl red (MR) hosted in polymethylmethacrylate (PMMA) incorporated with Benzyl dimethyl ketal (BDK) as a photo-initiator. Understanding photoisomerization mechanisms is crucial for several optical applications such as Read/Write/Erase (WRE) optical data storage media, UV light Read/Write heads, and UV light sensors. The as-prepared polymer composite thin films are characterized using UV-Vis spectroscopy. Furthermore, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) are employed to investigate the optical, chemical, and morphological properties of trans- and cis-states of PMMA-BDK-MR polymer composite thin films. The presence of the azo dye MR in the composite is essential for the efficient performance of the cis ↔ trans cycles through illumination ↔ thermal relaxation for Write/Read/Erase optical data storage and UV-light sensors. Moreover, UV-Vis and FTIR results confirm the hysteresis cycle of trans- and cis-states and that PMMA-BDK-MR thin films may be regarded as potential candidates for successful Write/Read/Erase optical data storage and UV-light sensors. In addition, the morphology of the thin film surface is investigated by SEM technique. The SEM images indicate that uncured surfaces of PMMA-BDK-MR thin films are inhomogeneous compared with the corresponding surfaces after curing. The transformation from inhomogeneous surfaces to homogeneous surfaces is attributed to the polymerization of thin films by UV curing.

Crystallographic, vibrational modes and optical properties data of α-DIPAB crystal.

The Crystallographic data of the α-DIPAB sample was measured using powder X-ray diffraction (PXRD). The crystal structure was also optimized using density functional based method. The calculations were performed both including van der Waals (vdW) interactions and excluding them to quantify the effects of vdW interaction on the crystal formation. The vibrational modes of DIPAB crystal corresponding to the Bromine deficient samples are calculated and presented. These show the origin of drastic change in dielectric response in Br deficient samples as compared to the ideal stoichiometric DIPAB crystal (Alsaad et al. 2018) [4]. Optical properties of an idealα-DIPAB were calculated using GGA and HSE06 hybrid functional methods implemented in VASP package. We mainly calculated the real and imaginary parts of the frequency-dependent linear dielectric function, as well as the related quantities such as the absorption, reflectivity, energy-loss function, and refractive index of α-DIPAB in the energy window of (0-12) eV.

Recoil-proton polarization in high-energy deuteron photodisintegration with circularly polarized photons.

We measured the angular dependence of the three recoil-proton polarization components in two-body photodisintegration of the deuteron at a photon energy of 2 GeV. These new data provide a benchmark for calculations based on quantum chromodynamics. Two of the five existing models have made predictions of polarization observables. Both explain the longitudinal polarization transfer satisfactorily. Transverse polarizations are not well described, but suggest isovector dominance.

Precision Rosenbluth measurement of the proton elastic form factors.

We report the results of a new Rosenbluth measurement of the proton electromagnetic form factors at Q2 values of 2.64, 3.20, and 4.10 GeV2. Cross sections were determined by detecting the recoiling proton, in contrast to previous measurements which detected the scattered electron. Cross sections were determined to 3%, with relative uncertainties below 1%. The ratio mu(p)G(E)/G(M) was determined to 4%-8% and showed mu(p)G(E)/G(M) approximately 1. These results are consistent with, and much more precise than, previous Rosenbluth extractions. They are inconsistent with recent polarization transfer measurements of similar precision, implying a systematic difference between the techniques.