Haemodynamics of stent-mounted neural interfaces in tapered and deformed blood vessels.

The endovascular neural interface provides an appealing minimally invasive alternative to invasive brain electrodes for recording and stimulation. However, stents placed in blood vessels have long been known to affect blood flow (haemodynamics) and lead to neointimal growth within the blood vessel. Both the stent elements (struts and electrodes) and blood vessel wall geometries can affect the mechanical environment on the blood vessel wall, which could lead to unfavourable vascular remodelling after stent placement. With increasing applications of stents and stent-like neural interfaces in venous blood vessels in the brain, it is necessary to understand how stents affect blood flow and tissue growth in veins. We explored the haemodynamics of a stent-mounted neural interface in a blood vessel model. Results indicated that blood vessel deformation and tapering caused a substantial change to the lumen geometry and the haemodynamics. The neointimal proliferation was evaluated in sheep implanted with an endovascular neural interface. Analysis showed a negative correlation with the mean Wall Shear Stress pattern. The results presented here indicate that the optimal stent oversizing ratio must be considered to minimise the haemodynamic impact of stenting.

Impact of soybean protein isolate concentration on chitosan-cellulose nanofiber edible films: Focus on structure and properties.

Chitosan and cellulose nanofiber films are frequently employed as biodegradable materials for food packaging. However, many exhibit suboptimal hydrophobicity and antioxidant properties. To address these shortcomings, we enhanced the performance by adding different concentrations of soybean protein isolate (SPI) to chitosan-cellulose nanofiber (CS-CNF) films. As SPI concentration varied, the turbidity, particle size, and ζ-potential of the film-forming solutions initially decreased and subsequently increased. This suggests that 1 % SPI augments the electrostatic attraction and compatibility. Rheological analysis confirmed a pronounced apparent viscosity at this concentration. Analyses using Fourier transform infrared spectra, Raman spectra, X-ray diffraction, and Scanning electron microscope revealed the presence of hydrogen bonds and electrostatic interactions between SPI and CS-CNF, indicative of superior compatibility. When SPI concentration was set at 1 %, notable enhancements in film attributes were observed: improvements in tensile strength and elongation at break, a reduction in water vapor permeability by 8.23 %, and an elevation in the contact angle by 18.85 %. Furthermore, at this concentration, the ABTS+ and DPPH scavenging capacities of the film surged by 61.53 % and 46.18 %, respectively. Meanwhile, the films we prepare are not toxic. This research offers valuable insights for the advancement and application of protein-polysaccharide-based films.

Computational Fluid Dynamics of Stent-Mounted Neural Interfaces in an Idealized Cerebral Venous Sinus.

Hemodynamic changes in stented blood vessels play a critical role in stent-associated complications. The majority of work on the hemodynamics of stented blood vessels has focused on coronary arteries but not cerebral venous sinuses. With the emergence of endovascular electrophysiology, there is a growing interest in stenting cerebral blood vessels. We investigated the hemodynamic impact of a stent-mounted neural interface inside the cerebral venous sinus. The stent was virtually implanted into an idealized superior sagittal sinus (SSS) model. Local venous blood flow was simulated. Results showed that blood flow was altered by the stent, generating recirculation and low wall shear stress (WSS) around the device. However, the effect of the electrodes on blood flow was not prominent due to their small size. This is an early exploration of the hemodynamics of a stent-mounted neural interface. Future work will shed light on the key factors that influence blood flow and stenting outcomes.Clinical Relevance-The study investigates blood flow through a stent-based electrode array inside the cerebral venous sinus. The hemodynamic impact of the stent can provide insight into neointimal growth and thrombus formation.

Vascular remodeling in sheep implanted with endovascular neural interface.

Objective.The aim of this work was to assess vascular remodeling after the placement of an endovascular neural interface (ENI) in the superior sagittal sinus (SSS) of sheep. We also assessed the efficacy of neural recording using an ENI.Approach.The study used histological analysis to assess the composition of the foreign body response. Micro-CT images were analyzed to assess the profiles of the foreign body response and create a model of a blood vessel. Computational fluid dynamic modeling was performed on a reconstructed blood vessel to evaluate the blood flow within the vessel. Recording of brain activity in sheep was used to evaluate efficacy of neural recordings.Main results.Histological analysis showed accumulated extracellular matrix material in and around the implanted ENI. The extracellular matrix contained numerous macrophages, foreign body giant cells, and new vascular channels lined by endothelium. Image analysis of CT slices demonstrated an uneven narrowing of the SSS lumen proportional to the stent material within the blood vessel. However, the foreign body response did not occlude blood flow. The ENI was able to record epileptiform spiking activity with distinct spike morphologies.Significance. This is the first study to show high-resolution tissue profiles, the histological response to an implanted ENI and blood flow dynamic modeling based on blood vessels implanted with an ENI. The results from this study can be used to guide surgical planning and future ENI designs; stent oversizing parameters to blood vessel diameter should be considered to minimize detrimental vascular remodeling.

Relationship between flexibility and interfacial functional properties of soy protein isolate: succinylation modification.

BACKGROUND: In this paper, the effects of different succinic anhydride (SA) additions on the flexibility of soy protein isolate (SPI) were investigated, and changes in protein conformation and interfacial functional properties were measured. The structure-effect relationship between conformation, flexibility, and interfacial functional properties was established. RESULTS: SPI was bound to SA through disulfide bonds, and the zeta potential was reduced. The ß-sheet content decreased, the disordered structure increased, and there were changes in tertiary structure and microstructure. The surface hydrophobicity, disulfide bond content, and solution turbidity were reduced to 5063, 1.0967 µmol g-1 , and 0.0036 µmol g-1 respectively. The best flexibility of SPI (0.3977) and interfacial functional properties were obtained when the mass ratio of SA/SPI was 15%. Correlation analysis showed a highly significant positive correlation (P < 0.01) between flexibility and emulsification and foaming properties, with correlation coefficients of 0.960 and 0.942 for flexibility with emulsifying activity and emulsion stability respectively, and 0.972 and 0.929 for flexibility with foaming capacity and foaming stability respectively. CONCLUSION: The results suggest that succinylation-induced conformational changes of SPI improved its interfacial functional properties by changing its flexibility. These results provide theoretical guidelines for the development and application of highly emulsifiable and stable soy protein products utilizing succinylation. © 2022 Society of Chemical Industry.

Non-covalent interaction of soy protein isolate and catechin: Mechanism and effects on protein conformation.

Understanding the molecular mechanism behind protein-polyphenol interactions is critical for the application of protein-polyphenol compounds in foods. The purpose of this research was to investigate the non-covalent interaction mechanism between soy protein isolate (SPI) and catechin and its effect on protein conformation. We observed that particle size, ζ-potential, and polyphenol bound equivalents of SPI increased significantly after non-covalent modification with catechin. These changes caused SPI to aggregate and form a network-like structure. Fourier transform infrared spectroscopy (FTIR) indicated that increased catechin concentrations caused SPI to become looser and more disordered as its α-helix and ß-sheet transformed into ß-turn and random coil. Furthermore, internal structure of SPI was opened and its hydrophobic groups were exposed to a polar environment, which was demonstrated by decreased surface hydrophobicity. Thermodynamic analysis and molecular docking results showed that the main forces present between SPI and catechin were hydrophobic interactions and hydrogen bonds.

Defect Passivation Using Trichloromelamine for Highly Efficient and Stable Perovskite Solar Cells.

Nonradiative recombination losses caused by defects in the perovskite layer seriously affects the efficiency and stability of perovskite solar cells (PSCs). Hence, defect passivation is an effective way to improve the performance of PSCs. In this work, trichloromelamine (TCM) was used as a defects passivator by adding it into the perovskite precursor solution. The experimental results show that the power conversion efficiency (PCE) of PSC increased from 18.87 to 20.15% after the addition of TCM. What's more, the environmental stability of PSCs was also improved. The working mechanism of TCM was thoroughly investigated, which can be ascribed to the interaction between the -NH- group and uncoordinated lead ions in the perovskite. This work provides a promising strategy for achieving highly efficient and stable PSCs.

The Layered Encapsulation of Vitamin B2 and ß-Carotene in Multilayer Alginate/Chitosan Gel Microspheres: Improving the Bioaccessibility of Vitamin B2 and ß-Carotene.

This research underlines the potential of alginate multilayered gel microspheres for the layered encapsulation and the simultaneous delivery of vitamin B2 (VB) and ß-carotene (BC). Chitosan was used to improve the stability and controlled release ability of alginate-based gel microspheres. It was shown that a clear multilayered structure possessed the characteristics of pH response, and excellent thermal stability. The sodium alginate concentration and the number of layers had notable effects on mechanical properties and particle size of gel microspheres. Fourier-transform infrared spectroscopy and X-ray diffraction analyses further proved that VB and BC were encapsulated within the gel microspheres. Compared with the three-layer VB-loaded gel microspheres, the total release of VB from the three-layer VB and BC-loaded gel decreased from 93.23% to 85.58%. The total release of BC from the three-layer VB and BC-loaded gel increased from 66.11% to 69.24% compared with three-layer BC-loaded gel. The simultaneous encapsulation of VB and BC in multilayered gel microspheres can markedly improve their bioaccessibility and bioavailability. These results showed the multilayer gel microspheres synthesized herein have potential for applications in the layered encapsulation and simultaneous delivery of various bioactive substances to the intestinal tract.