Reversible Snapping of Constrained Anisotropic Hydrogels Upon Light Stimulations.

Creatures, such as Venus flytrap and hummingbirds, capable of rapid predation through snap-through transition, provide paradigms for the design of soft actuators and robots with fast actions. However, these artificial "snappers" usually need contact stimulations to trigger the flipping. Reported here is a constrained anisotropic poly(N-isopropylacrylamide) hydrogel showing fast snapping upon light stimulation. This hydrogel is prepared by flow-induced orientation of nanosheets (NSs) within a rectangular tube. The precursor containing gold nanoparticles is immediately exposed to UV light for photopolymerization to fix the ordered structure of NSs. Two ends of the slender gel are clamped to form a buckle with bistability nature, which snaps to the other side upon laser irradiation. Systematic experiments are conducted to investigate the influences of power intensity and irradiation angle of the laser, as well as thickness and buckle height of the gel, on the snapping behaviors. The fast snapping is further used to kick a plastic bead and control the switch state. Furthermore, synergetic or oscillated snapping of the gel with two buckles of opposite directions is realized by inclined irradiation of a laser or horizontal irradiation with two lasers, respectively. Such light-steered snapping of hydrogels should merit designing soft robots, energy harvests, etc.

Impact of Microbubble Degradation and Flow Velocity on Subharmonic-aided Pressure Estimation (SHAPE): An Experimental Investigation.

OBJECTIVE: This study aimed to investigate the impact of microbubble degradation and flow velocity on Sub-Harmonic Aided Pressure Estimation (SHAPE), and to explore the correlation between subharmonic amplitude and pressure as a single factor. METHODS: We develop an open-loop vascular phantom platform system and utilize a commercial ultrasound machine and microbubbles for subharmonic imaging. Subharmonic amplitude was measured continuously at constant pressure and flow velocity to assess the impact of microbubble degradation. Flow velocity was varied within a range of 4-14 cm/s at constant pressure to investigate its relationship to subharmonic amplitude. Furthermore, pressure was varied within a range of 10-110 mm Hg at constant flow velocity to assess its isolated effect on subharmonic amplitude. RESULTS: Under constant pressure and flow velocity, subharmonic amplitude exhibited a continuous decrease at an average rate of 0.221 dB/min, signifying ongoing microbubble degradation during the experimental procedures. Subharmonic amplitude demonstrated a positive correlation with flow velocity, with a variation ratio of 0.423 dB/(cm/s). Under controlled conditions of microbubble degradation and flow velocity, a strong negative linear correlation was observed between pressure and subharmonic amplitude across different Mechanical Index (MI) settings (all R2 > 0.90). The sensitivity of SHAPE was determined to be 0.025 dB/mmHg at an MI of 0.04. CONCLUSION: The assessment of SHAPE sensitivity is affected by microbubble degradation and flow velocity. Excluding the aforementioned influencing factors, a strong linear negative correlation between pressure and subharmonic amplitude was still evident, albeit with a sensitivity coefficient lower than previously reported values.

The PTM profiling of CTCF reveals the regulation of 3D chromatin structure by O-GlcNAcylation.

CCCTC-binding factor (CTCF), a ubiquitously expressed and highly conserved protein, is known to play a critical role in chromatin structure. Post-translational modifications (PTMs) diversify the functions of protein to regulate numerous cellular processes. However, the effects of PTMs on the genome-wide binding of CTCF and the organization of three-dimensional (3D) chromatin structure have not been fully understood. In this study, we uncovered the PTM profiling of CTCF and demonstrated that CTCF can be O-GlcNAcylated and arginine methylated. Functionally, we demonstrated that O-GlcNAcylation inhibits CTCF binding to chromatin. Meanwhile, deficiency of CTCF O-GlcNAcylation results in the disruption of loop domains and the alteration of chromatin loops associated with cellular development. Furthermore, the deficiency of CTCF O-GlcNAcylation increases the expression of developmental genes and negatively regulates maintenance and establishment of stem cell pluripotency. In conclusion, these results provide key insights into the role of PTMs for the 3D chromatin structure.

Development and characterization of discontinuous atmospheric pressure interface - Dual pressure chamber miniature mass spectrometer.

Miniaturized mass spectrometers have become increasingly prevalent for real-time detection and analysis, owing to their compact size and portability. The pursuit of performance enhancement in these instruments is a pivotal objective within the domain of mass spectrometry miniaturization. This study introduces a novel miniature mass spectrometer featuring a discontinuous atmospheric pressure interface and a dual pressure chamber. Compared to conventional single-chamber, discontinuous sampling interface mass spectrometers, the newly developed instrument demonstrates a more than tenfold improvement in detection efficiency. This significant enhancement is achieved without the need for complex control of switch coupling time series, thereby streamlining the circuit design and improving the instrument's fault tolerance. Furthermore, by capitalizing on the benefits of discontinuous sampling, the instrument reduces the operational pressure relative to traditional continuous sampling in differential pressure vacuum chambers. It accommodates larger inlet capillary (0.38 mm) and skimmer (0.5 mm) diameters, leading to a ninefold increase in response strength for risperidone and lowering the detection limit to 0.5 ppb. The instrument's capacity for rapid drug detection, along with enhanced resolution and detection limits, underscores its potential utility. Additionally, it facilitates the use of smaller mechanical pumps, significantly diminishing both the instrument's volume and power consumption. This presents a promising avenue for further miniaturization of mass spectrometers.

Closed Twisted Hydrogel Ribbons with Self-Sustained Motions under Static Light Irradiation.

Self-sustained motions are widespread in biological systems by harvesting energy from surrounding environments, which inspire scientists to develop autonomous soft robots. However, most-existing soft robots require dynamic heterogeneous stimuli or complex fabrication with different components. Recently, control of topological geometry has been promising to afford soft robots with physical intelligence and thus life-like motions. Reported here are a series of closed twisted ribbon robots, which exhibit self-sustained flipping and rotation under constant light irradiation. Both Möbius strip and Seifert ribbon robots are devised for the first time by using an identical hydrogel, which responds to light irradiation on either side. Experiment and simulation results indicate that the self-regulated motions of the hydrogel robots are related to fast and reversible response of muscle-like gel, self-shadowing effect, and topology-facilitated refresh of light-exposed regions. The motion speeds and directions of the hydrogel robots can be tuned over a wide range. These closed twisted ribbon hydrogels are further applied to execute specific tasks in aqueous environments, such as collecting plastic balls, climbing a vertical rod, and transporting objects. This work presents new design principle for autonomous hydrogel robots by benefiting from material response and topology geometry, which may be inspirative for the robotics community.

Isorhamnetin ameliorates cisplatin-induced acute kidney injury in mice by activating SLPI-mediated anti-inflammatory effect in macrophage.

OBJECTIVE: Isorhamnetin (IH) has been reported to have significant anti-inflammatory effects in various diseases, but its role and mechanism in AKI remain unclear. This study aimed to explore the potential role and mechanism of isorhamnetin in inhibiting macrophage related inflammation and improving AKI injury. METHODS: We established an AKI mouse model by intraperitoneal injection of cisplatin in vivo, and constructed an inflammatory cell model by stimulating RAW264.7 cells with LPS. Creatinine and urea nitrogen were measured to evaluate the changes of renal function in AKI mice. The changes of renal pathological structure were observed by H&E staining. The inflammatory factor-related proteins and RNA expression levels were detected by Western blot and real time PCR. RESULTS: Isorhamnetin protected the kidney from cisplatin induced AKI and significantly inhibited the mRNA and protein levels of inflammatory cytokines (IL-1ß, IL-6, and TNF-α) both in AKI kidney and LPS-stimulated RAW264.7 cells. Interestingly, the data also demonstrated that isorhamnetin significantly upregulated the expression of secretory leukocyte peptidase inhibitor (SLPI), an anti-inflammatory factor, in AKI kidney and LPS-stimulated macrophages, as well as inhibited the M1 macrophage and activated M2 macrophage in vitro. Blocking of SLPI by siRNA activated Mincle-associated inflammatory signaling in macrophages, and the inhibitory effect of isorhamnetin on inflammation was significantly attenuated. CONCLUSION: Isorhamnetin inhibits macrophage inflammation and protects kidney in AKI may be related to downregulating Mincle/Syk/NF-κB-maintained macrophage phenotype by activating SLPI.

Precise prediction of phase-separation key residues by machine learning.

Understanding intracellular phase separation is crucial for deciphering transcriptional control, cell fate transitions, and disease mechanisms. However, the key residues, which impact phase separation the most for protein phase separation function have remained elusive. We develop PSPHunter, which can precisely predict these key residues based on machine learning scheme. In vivo and in vitro validations demonstrate that truncating just 6 key residues in GATA3 disrupts phase separation, enhancing tumor cell migration and inhibiting growth. Glycine and its motifs are enriched in spacer and key residues, as revealed by our comprehensive analysis. PSPHunter identifies nearly 80% of disease-associated phase-separating proteins, with frequent mutated pathological residues like glycine and proline often residing in these key residues. PSPHunter thus emerges as a crucial tool to uncover key residues, facilitating insights into phase separation mechanisms governing transcriptional control, cell fate transitions, and disease development.

3D-printed near-infrared-light-responsive on-demand drug-delivery scaffold for bone regeneration.

Although several bioactive 3D-printed bone scaffolds loaded with multiple kinds of biomolecules for enhanced bone regeneration have been recently developed, the manipulation of on-demand release profiles of different biomolecules during bone regeneration remains challenging. Herein, a 3D-printed dual-drug-loaded biomimetic scaffold to regulate the host stem cell recruitment and osteogenic differentiation in a two-stage process for bone regeneration was successfully fabricated. First, a chemotactic small-molecule drug, namely, simvastatin (SIM) was directly incorporated into the hydroxyapatite/collagen bioink for printing and could be rapidly released during the early stage of bone regeneration. Further, near-infrared (NIR)-light-responsive polydopamine-coated hydroxyapatite nanoparticles were designed to deliver the osteogenic drug, i.e., pargyline (PGL) in a controllable manner. Together, our scaffold displayed an on-demand sequential release of those two drugs and could optimize their therapeutic effects to align with the stem cell recruitment and osteoblastic differentiation, thereby promoting bone regeneration. The results confirmed the suitable mechanical strength, high photothermal conversion efficiency, good biocompatibility of our scaffold. The scaffold loaded with SIM could efficiently accelerate the migration of stem cells. In addition, the scaffold with on-demand sequential release promoted alkaline phosphatase (ALP) activity, significantly upregulated gene expression levels of osteogenesis-related markers, and enhanced new-bone-formation capabilities in rabbit cranial defect models. Altogether, this scaffold not only offers a promising strategy to control the behavior of stem cells during bone regeneration but also provides an efficient strategy for controllable sequential release of different biomolecule in bone tissue engineering.

Photo-steered rapid and multimodal locomotion of 3D-printed tough hydrogel robots.

Hydrogels are an ideal material to develop soft robots. However, it remains a grand challenge to develop miniaturized hydrogel robots with mechanical robustness, rapid actuation, and multi-gait motions. Reported here is a facile strategy to fabricate hydrogel-based soft robots by three-dimensional (3D) printing of responsive and nonresponsive tough gels for programmed morphing and locomotion upon stimulations. Highly viscoelastic poly(acrylic acid-co-acrylamide) and poly(acrylic acid-co-N-isopropyl acrylamide) aqueous solutions, as well as their mixtures, are printed with multiple nozzles into 3D constructs followed by incubation in a solution of zirconium ions to form robust carboxyl-Zr4+ coordination complexes, to produce tough metallo-supramolecular hydrogel fibers. Gold nanorods are incorporated into ink to afford printed gels with response to light. Owing to the mechanical excellence and small diameter of gel fibers, the printed hydrogel robots exhibit high robustness, fast response, and agile motions when remotely steered by dynamic light. The design of printed constructs and steering with spatiotemporal light allow for multimodal motions with programmable trajectories of the gel robots. The hydrogel robots can walk, turn, flip, and transport cargos upon light stimulations. Such printed hydrogels with good mechanical performances, fast response, and agile locomotion may open opportunities for soft robots in biomedical and engineering fields.

Animating hydrogel knotbots with topology-invoked self-regulation.

Steering soft robots in a self-regulated manner remains a grand challenge, which often requires continuous symmetry breaking and recovery steps for persistent motion. Although structural morphology is found significant for robotic functions, geometric topology has rarely been considered and appreciated. Here we demonstrate a series of knotbots, namely hydrogel-based robots with knotted structures, capable of autonomous rolling and spinning/rotating motions. With symmetry broken by external stimuli and restored by self-regulation, the coupling between self-constraint-induced prestress and photothermal strain animates the knotbots continuously. Experiments and simulations reveal that nonequilibrium processes are regulated dynamically and cooperatively by self-constraints, active deformations, and self-shadowing effect of the photo-responsive gel. The active motions enable the knotbots to execute tasks including gear rotation and rod climbing. This work paves the way to devise advanced soft robots with self-regulated sustainable motions by harnessing the topology.

Two-dimensional liquid chromatography measurement of meropenem concentration in synovial fluid of patients with periprosthetic joint infection.

Periprosthetic joint infection (PJI) is a catastrophic complication following joint replacement surgery. One potential treatment approach for PJI could be the combination of one-stage revision and intra-articular infusion of antibiotics. Meropenem is one of the commonly used intra-articular antibiotics in our institution. Determining the concentration of meropenem in the joint cavity could be crucial for optimizing its local application, effectively eradicating biofilm infection, and improving PJI treatment outcomes. In this study, we developed a simple, precise, and accurate method of two-dimensional liquid chromatography (2D-LC) for determining the concentration of meropenem in human synovial fluid. The method was then validated based on the guidelines of the Food and Drug Administration and the Chinese Pharmacopoeia. Meropenem showed good linearity in the range of 0.31-25.01 µg/mL (r ≥ .999). Selectivity, intra-day and inter-day precision and accuracy, extraction recovery, and stability validation results were all within the acceptance range. This method has been successfully applied to the determination of synovial fluid samples from PJI patients, providing a useful detection method for meropenem therapeutic drug monitoring (TDM) in PJI patients.

FAT1 inhibits AML autophagy and proliferation via downregulating ATG4B expression.

BACKGROUND: Emerging studies have shown that FAT atypical cadherin 1 (FAT1) and autophagy separately inhibits and promotes acute myeloid leukemia (AML) proliferation. However, it is unknown whether FAT1 were associated with autophagy in regulating AML proliferation. METHODS: AML cell lines, 6-week-old male nude mice and AML patient samples were used in this study. qPCR/Western blot and cell viability/3H-TdR incorporation assays were separately used to detect mRNA/protein levels and cell activity/proliferation. Luciferase reporter assay was used to examine gene promoter activity. Co-IP analysis was used to detect the binding of proteins. RESULTS: In this study, we for the first time demonstrated that FAT1 inhibited AML proliferation by decreasing AML autophagy level. Moreover, FAT1 weakened AML autophagy level via decreasing autophagy related 4B (ATG4B) expression. Mechanistically, we found that FAT1 reduced the phosphorylated and intranuclear SMAD family member 2/3 (smad2/3) protein levels, thus decreasing the activity of ATG4B gene promoter. Furthermore, we found that FAT1 competitively bound to TGF-ßR II which decreased the binding of TGF-ßR II to TGF-ßR I and the subsequent phosphorylation of TGF-ßR I, thus reducing the phosphorylation and intranuclear smad2/3. The experiments in nude mice showed that knockdown of FAT1 promoted AML autophagy and proliferation in vivo. CONCLUSIONS: Collectively, these results revealed that FAT1 downregulates ATG4B expression via inhibiting TGFß-smad2/3 signaling activity, thus decreasing the autophagy level and proliferation activity of AML cells. GENERAL SIGNIFICANCE: Our study suggested that the "FAT1-TGFß-smad2/3-ATG4B-autophagy" pathway may be a novel target for developing new targeted drugs to AML treatment.

Localization of Ectopic Hyperparathyroidism: Ultrasound Versus 99mTc-sestamibi, 4-Dimensional Computed Tomography, and 11C-choline Positron Emission Tomography/Computed Tomography.

OBJECTIVE: To investigate the usefulness of ultrasound (US) for the localization of ectopic hyperparathyroidism and compare it with 99mTc-sestamibi (99mTc-MIBI), 4-dimensional computed tomography (4D-CT), and 11C-choline positron emission tomography/ computed tomography (PET/CT). METHODS: Of the 527 patients with surgically confirmed primary hyperparathyroidism, 79 patients with ectopic hyperparathyroidism were enrolled. The diagnostic performance of US, 99mTc-MIBI, US + MIBI, 4D-CT, and 11C-choline PET/CT was calculated, and the factors affecting the sensitivity of US and 99mTc-MIBI were analyzed. RESULTS: Eighty-three ectopic parathyroid lesions were found in 79 patients. The sensitivity was 75.9%, 81.7%, 95.1%, 83.3%, and 100% for US, 99mTc-MIBI, US + MIBI, 4D-CT, and 11C-choline PET/CT, respectively. The difference in sensitivity among these different modalities did not achieve statistical significance (P > .05). The US sensitivity was significantly higher for ectopic lesions in the neck region than for those in the anterior mediastinum/chest wall (85.9% vs. 42.1%, P < .001). The 99mTc-MIBI and 4D-CT sensitivity was not significantly different between these two groups (84.1% vs. 94.6%, P = .193 and 81.3% vs. 85.7%, P = 1). The 11C-choline PET/CT sensitivity was 100% in both groups. CONCLUSIONS: US is a valuable tool for the localization of ectopic hyperparathyroidism, especially for ectopic lesions in the neck region.

Novel antibacterial drug target against Gram-negative bacteria: lipopolysaccharide transport protein LptDE and its inhibitors / 药学学报

The outer membrane composed predominantly of lipopolysaccharide (LPS) is an essential biological barrier for most Gram-negative (G-) bacteria. Lipopolysaccharide transport protein (Lpt) complex LptDE is responsible for the critical final stage of LPS transport and outer membrane assembly. The structure and function of LptDE are highly conserved in most G- bacteria but absent in mammalian cells, and thus LptDE complex is regarded as an attractive antibacterial target. In recent 10 years, the deciphering of the three-dimensional structure of LptDE protein facilities the drug discovery based on such "non-enzyme" proteins. Murepavadin, a peptidomimetic compound, was reported to be the first compound able to target LptD, enlightening a new class of antibacterial molecules with novel mechanisms of action. This article is devoted to summarize the molecular characteristics, structure-function of LptDE protein complex and review the development of murepavadin and related peptidomimetic compounds, in order to provide references for relevant researches.

Small incision lenticule extraction for the treatment of myopic anisometropia / 国际眼科杂志(Guoji Yanke Zazhi)

AIM: To explore the clinical effect of small incision lenticule extraction(SMILE)on the treatment of myopic anisometropia.METHODS: Clinical data of 76 patients(146 eyes)with myopic anisometropia who received SMILE or femtosecond assisted laser in situ keratomileusis(FS-LASIK)in our hospital from January 2021 to December 2022 were retrospectively analyzed. The patients were divided into SMILE group(39 cases, 77 eyes)and FS-LASIK group(37 cases, 69 eyes)according to surgical methods. Uncorrected visual acuity(UCVA), diopter, anisometropia, corneal aberration and occurrence of postoperative complications were compared between the two groups at 1 wk, 1 and 3 mo after surgery.RESULTS: The UCVA of the two groups was improved after surgery compared with that before surgery, and the coma, trefoil, spherical aberration and total higher-order aberration were significantly increased compared to those before surgery(P&#x003C;0.05), and the coma, trefoil, spherical aberration and total higher-order aberration in the FS-LASIK group were significantly higher than those in the SMILE group(P&#x003C;0.05). After follow-up to 3 mo after surgery, the incidence of postoperative complications was significantly lower in the SMILE group than that in the FS-LASIK group(5.2% vs 15.9%, P&#x003C;0.05).CONCLUSION: Both SMILE and FS-LASIK can effectively enhance the UCVA and improve the visual quality in patients with myopic anisometropia, but SMILE has lower corneal higher order aberrations, lower incidence of postoperative complications and better overall effect.

The ERF transcription factor LTF1 activates DIR1 to control stereoselective synthesis of antiviral lignans and stress defense in Isatis indigotica roots

Lignans are a powerful weapon for plants to resist stresses and have diverse bioactive functions to protect human health. Elucidating the mechanisms of stereoselective biosynthesis and response to stresses of lignans is important for the guidance of plant improvement. Here, we identified the complete pathway to stereoselectively synthesize antiviral (-)-lariciresinol glucosides in Isatis indigotica roots, which consists of three-step sequential stereoselective enzymes DIR1/2, PLR, and UGT71B2. DIR1 was further identified as the key gene in respoJanuary 2024nse to stresses and was able to trigger stress defenses by mediating the elevation in lignan content. Mechanistically, the phytohormone-responsive ERF transcription factor LTF1 colocalized with DIR1 in the cell periphery of the vascular regions in mature roots and helped resist biotic and abiotic stresses by directly regulating the expression of DIR1. These systematic results suggest that DIR1 as the first common step of the lignan pathway cooperates with PLR and UGT71B2 to stereoselectively synthesize (-)-lariciresinol derived antiviral lignans in I. indigotica roots and is also a part of the LTF1-mediated regulatory network to resist stresses. In conclusion, the LTF1-DIR1 module is an ideal engineering target to improve plant Defenses while increasing the content of valuable lignans in plants.

Caregiver-child interaction as an effective tool for identifying autism spectrum disorder: evidence from EEG analysis.

BACKGROUND: Autism Spectrum Disorder (ASD) is a complex neurodevelopmental disorder that affects individuals across their lifespan. Early diagnosis and intervention are crucial for improving outcomes. However, current diagnostic methods are often time-consuming, and costly, making them inaccessible to many families. In the current study, we aim to test caregiver-child interaction as a potential tool for screening children with ASD in clinic. METHODS: We enrolled 85 preschool children (Mean age: 4.90 ± 0.65 years, 70.6% male), including ASD children with or without developmental delay (DD), and typical development (TD) children, along with their caregivers. ASD core symptoms were evaluated by Childhood Autism Rating Scale (CARS) and Autism Diagnostic Observation Schedule-Calibrated Severity Scores (ADOS-CSS). Behavioral indicators were derived from video encoding of caregiver-child interaction, including social involvement of children (SIC), interaction time (IT), response of children to social cues (RSC), time for caregiver initiated social interactions (GIS) and time for children initiated social interactions (CIS)). Power spectral density (PSD) values were calculated by EEG signals simultaneously recorded. Partial Pearson correlation analysis was used in both ASD groups to investigate the correlation among behavioral indicators scores and ASD symptom severity and PSD values. Receiver operating characteristic (ROC) analysis was used to describe the discrimination accuracy of behavioral indicators. RESULTS: Compared to TD group, both ASD groups demonstrated significant lower scores of SIC, IT, RSC, CIS (all p values < 0.05), and significant higher time for GIS (all p values < 0.01). SIC scores negatively correlated with CARS (p = 0.006) and ADOS-CSS (p = 0.023) in the ASD with DD group. Compared to TD group, PSD values elevated in ASD groups (all p values < 0.05), and was associated with SIC (theta band: p = 0.005; alpha band: p = 0.003) but not IQ levels. SIC was effective in identifying both ASD groups (sensitivity/specificity: ASD children with DD, 76.5%/66.7%; ASD children without DD, 82.6%/82.2%). CONCLUSION: Our results verified the behavioral paradigm of caregiver-child interaction as an efficient tool for early ASD screening.

Plastome phylogenomics and morphological traits analyses provide new insights into the phylogenetic position, species delimitation and speciation of Triplostegia (Caprifoliaceae).

BACKGROUND: The genus Triplostegia contains two recognized species, T. glandulifera and T. grandiflora, but its phylogenetic position and species delimitation remain controversial. In this study, we assembled plastid genomes and nuclear ribosomal DNA (nrDNA) cistrons sampled from 22 wild Triplostegia individuals, each from a separate population, and examined these with 11 recently published Triplostegia plastomes. Morphological traits were measured from herbarium specimens and wild material, and ecological niche models were constructed. RESULTS: Triplostegia is a monophyletic genus within the subfamily Dipsacoideae comprising three monophyletic species, T. glandulifera, T. grandiflora, and an unrecognized species Triplostegia sp. A, which occupies much higher altitude than the other two. The new species had previously been misidentified as T. glandulifera, but differs in taproot, leaf, and other characters. Triplotegia is an old genus, with stem age 39.96 Ma, and within it T. glandulifera diverged 7.94 Ma. Triplostegia grandiflora and sp. A diverged 1.05 Ma, perhaps in response to Quaternary climate fluctuations. Niche overlap between Triplostegia species was positively correlated with their phylogenetic relatedness. CONCLUSIONS: Our results provide new insights into the species delimitation of Triplostegia, and indicate that a taxonomic revision of Triplostegia is needed. We also identified that either rpoB-trnC or ycf1 could serve as a DNA barcode for Triplostegia.

Torsional Behavior of Concrete-Filled Circular Steel Tubes Strengthened with CFRP.

In order to study the torsional performance of steel tube concrete after reinforcement with a carbon-fiber-reinforced polymer (CFRP), the mechanical properties of 18 specimens were studied from both experimental and finite element perspectives. The T-θ curve and τ-γ curve of the specimen were measured in the experiment, and the failure mode of the specimen was analyzed. Subsequently, a reasonable finite element model was established using ABAQUS software, and the variation in various parameters surrounding the performance of the specimen was analyzed. Based on the experimental and finite element results, a formula for calculating the bearing capacity of the specimen was established. According to both the experimental and numerical results, the torsional bearing capacity of C-CF-CFRP-ST, defined as the torque endured by the specimen with maximum shear strain, was determined to be 15,000 µÎµ, together with its corresponding calculation formula. After the test, it was demonstrated that the main components of the concrete-filled CFRP-steel tube composite material-the steel tube and the concrete-could be used as reusable resources.