Tribological Properties of Blocky Composites with Carbon Nanotubes.

A large amount of primary energy is lost due to friction, and the study of new additive materials to improve friction performance is in line with the concept of low carbon. Carbon nanotubes (CNTs) have advantages in drag reduction and wear resistance with their hollow structure and self-lubricating properties. This review investigated the mechanism of improving friction properties of blocky composites (including polymer, metal, and ceramic-based composites) with CNTs' incorporation. The characteristic tubular structure and the carbon film make low wear rate and friction coefficient on the surface. In addition, the effect of CNTs' aggregation and interfacial bond strength on the wear resistance was analyzed. Within an appropriate concentration range of CNTs, the blocky composites exhibit better wear resistance properties. Based on the differences in drag reduction and wear resistance in different materials and preparation methods, further research directions of CNTs have been suggested.

Photoinduced Solid-Liquid Phase Transition and Energy Storage Enabled by the Design of Linked Double Photoswitches.

We demonstrate an effective design strategy of photoswitchable phase change materials based on the bis-azobenzene scaffold. These compounds display a solid phase in the E,E state and a liquid phase in the Z,Z state, in contrast to their monoazobenzene counterparts that exhibit less controlled phase transition behaviors that are largely influenced by their functional groups.

Visible light activated energy storage in solid-state Azo-BF2 switches.

We present here a group of Azo-BF2 photoswitches that store and release energy in response to visible light irradiation. Unmodified Azo-BF2 switches have a planar structure with a large π-conjugation system, which hinders E-Z isomerization when in a compacted state. To address this challenge, we modified the switches with one or two aliphatic groups, which altered the intermolecular interactions and arrangement of the photochromes in the solid state. The derivative with two substituents exhibited a non-planar configuration that provided particularly large conformational freedom, allowing for efficient isomerization in the solid phase. Our discovery highlights the potential of using double aliphatic functionalization as a promising approach to facilitate solid-state switching of large aromatic photoswitches. This finding opens up new possibilities for exploring various photoswitch candidates for molecular solar thermal energy storage applications.

Optically Controlled Recovery and Recycling of Homogeneous Organocatalysts Enabled by Photoswitches.

We address a critical challenge of recovering and recycling homogeneous organocatalysts by designing photoswitchable catalyst structures that display a reversible solubility change in response to light. Initially insoluble catalysts are UV-switched to a soluble isomeric state, which catalyzes the reaction, then back-isomerizes to the insoluble state upon completion of the reaction to be filtered and recycled. The molecular design principles that allow for the drastic solubility change over 10 times between the isomeric states, 87 % recovery by the light-induced precipitation, and multiple rounds of catalyst recycling are revealed. This proof of concept will open up opportunities to develop highly recyclable homogeneous catalysts that are important for the synthesis of critical compounds in various industries, which is anticipated to significantly reduce environmental impact and costs.

Photon Energy Storage in Strained Cyclic Hydrazones: Emerging Molecular Solar Thermal Energy Storage Compounds.

The generally small Gibbs free energy difference between the Z and E isomers of hydrazone photoswitches has so far precluded their use in photon energy storing applications. Here, we report on a series of cyclic and acyclic hydrazones, which possess varied degrees of ring strain and, hence, stability of E isomers. The photoinduced isomerization and concurrent phase transition of the cyclic hydrazones from a crystalline to a liquid phase result in the storage of a large quantity of energy, comparable to that of azobenzene derivatives. We demonstrate that the macrocyclic photochrome design in combination with phase transition is a promising strategy for molecular solar thermal energy storage applications.

Design of phase-transition molecular solar thermal energy storage compounds: compact molecules with high energy densities.

A series of compact azobenzene derivatives were investigated as phase-transition molecular solar thermal energy storage compounds that exhibit maximum energy storage densities around 300 J g-1. The relative size and polarity of the functional groups on azobenzene were manifested to significantly influence the phase of isomers and their energy storage capacity.

A Flexible-Robust Copper(II) Metal-Organic Framework Constructed from a Fluorinated Ligand for CO2/R22 Capture.

A flexible-robust copper(II) metal-organic framework, denoted as LIFM-100, has been successfully synthesized using a fluorinated linear dicarboxylate to link copper ions. LIFM-100 exhibits a breathing effect, which can transform reversibly between a large form (lp) and a narrow form (np) from single crystal to single crystal. In addition, LIFM-100 shows good thermal and chemical stability. By the introduction of trifluoromethyl functional groups and uncoordinated carboxyl acids, LIFM-100 features a good CO2/R22 adsorption/separation performance at 298 K, showing potential in natural gas purification and CO2/R22 capture.

Self-Generation of Surface Roughness by Low-Surface-Energy Alkyl Chains for Highly Stable Superhydrophobic/Superoleophilic MOFs with Multiple Functionalities.

We transformed the hydrophilic metal-organic framework (MOF) UiO-67 into hydrophobic UiO-67-Rs (R=alkyl) by introducing alkyl chains into organic linkers, which not only protected hydrophilic Zr6 O8 clusters to make the MOF interspace superoleophilic, but also led to a rough crystal surface beneficial for superhydrophobicity. The UiO-67-Rs displayed high acid, base, and water stability, and long alkyl chains offered better hydrophobicity. Good hydrophobicity/oleophilicity were also possible with mixed-ligand MOFs containing metal-binding ligands. Thus, a (super)hydrophobic MOF catalyst loaded with Pd centers efficiently catalyzed Sonogashira reactions in water at ambient temperature. Studies of the hydrophobic effects of the coordination interspace and the outer surface suggest a simple de novo strategy for the synthesis of superhydrophobic MOFs that combine surface roughness and low surface energy. Such MOFs have potential for environmentally friendly catalysis and water purification.

Pressure-Induced Multiphoton Excited Fluorochromic Metal-Organic Frameworks for Improving MPEF Properties.

In multiphoton excited fluorescence (MPEF), high-energy upconversion emission is obtained from low-energy excitation by absorbance of two or more photons simultaneously. In a pressure-induced fluorochromic process, the emission energy is switched by outer pressure stimuli. Now, five metal-organic frameworks containing the same ligand with simultaneous multiphoton absorption and pressure-induced fluorochromic attributes were studied. One-, two-, and three-photon excited fluorescence (1/2/3PEF) can be achieved in the frameworks, which exhibit pressure-induced blue-to-yellow fluorochromism. The performances are closely dependent with the topologies, flexibilities, and packing states of the frameworks and chromophores therein. The multiphoton upconversion performance can be intensified by pressure-related structural contraction. Over ten-fold increment in the 2PA active cross-section up to 2217 GM is achieved in pressed LIFM-114 compared with the 210 GM for pristine sample at 780 nm.

Catalysis through Dynamic Spacer Installation of Multivariate Functionalities in Metal-Organic Frameworks.

We demonstrate herein a facile strategy to engineer versatile catalytically active coordination interspace in the same primitive metal-organic framework (MOF) for variable heterogeneous catalysis. Different functional ligands can be reversibly inserted into and removed from proto-LIFM-28 individually or successively to bring in single or binary catalytic sites for specific reactions and switch the parent MOF to multipurpose catalysts. Alcohol-oxidation, Knoevenagel-condensation, click, acetal, and Baylis-Hillman reactions are achievable through simple exchange of a single catalytic spacer, while sequential or stepwise reactions are designable via selective combination of two catalytic spacers with different functionalities, thus making proto-LIFM-28 a multivariate MOF for multiuse and economic catalysis.

A Flexible Cu-MOF as Crystalline Sponge for Guests Determination.

A trifluoromethyl functionalized linker and Cu-O chain composed MOF, LIFM-100, was used as "crystalline sponge" to determine eight hardly crystallized liquids' configurations based on its flexibility conformation, suitable pore size, electron-rich channel environment, and low symmetric space group. The H bond interactions between host-guest and guest-guest were well analyzed.

Tunability of fluorescent metal-organic frameworks through dynamic spacer installation with multivariate fluorophores.

Through dynamic spacer installation, five fluorescent metal-organic frameworks (MOFs) have been constructed based on a proto-MOF LIFM-28 and multivariate ligands as fluorophores. The emissions are tunable via insertion of fluorescent ligands, demonstrating a versatile approach for luminescence tuning by virtue of dynamic spacer installation using swing-role MOFs.

Stepwise engineering of pore environments and enhancement of CO2/R22 adsorption capacity through dynamic spacer installation and functionality modification.

Through stepwise post-synthetic spacer insertion and click reactions, six Zr-MOFs with different types and amounts of functional groups have been constructed based on proto-MOF PCN-700. Their gas adsorption capacities and selectivities have been greatly improved and finely tuned, demonstrating the combinatorial effect of pore surface modification and pore space partition.

Dynamic Spacer Installation for Multirole Metal-Organic Frameworks: A New Direction toward Multifunctional MOFs Achieving Ultrahigh Methane Storage Working Capacity.

A robust Zr-MOF (LIFM-28) containing replaceable coordination sites for additional spacer installation has been employed to demonstrate a swing- or multirole strategy for multifunctional MOFs. Through reversible installation/uninstallation of two types of spacers with different lengths and variable functional groups, different tasks can be accomplished using the same parent MOF. An orthogonal optimizing method is applied with seven shorter (L1-7) and six longer (L8-13) spacers to tune the functionalities, achieving multipurpose switches among gas separation, catalysis, click reaction, luminescence, and particularly, ultrahigh methane storage working capacity at 5-80 bar and 298 K.