RESUMO
A polyelectrolyte system consisting of sodium alginate (SA) and quaternary ammonium chitosan (QAC) blended with polydopamine-coated copper sulfide particles (CuS@PDA) was chosen to investigate the function of CuS@PDA in the uniform binary blending of anionic and cationic polyelectrolytes in detail. A smart composite fiber SA/QAC/CuS@PDA was prepared via a dry-wet spinning technique. With the addition of CuS@PDA (about 4.3 % in fiber), the as-prepared SA/QAC/CuS@PDA-0.50 fibers (SQCuS@P-0.50 SCFs) showed notably enhanced intensity 359.2 MPa, excellent moisture response, and photothermal conversion performance, with the temperature increasing from 25.9 to 80.7 °C as irradiated under a 980 nm infrared lamp at distance 20 cm away for 120 s. The photothermal performance was maintained after 6 lighting on-and-off cycles. The tensile strength decreased ~23.8 % after 4 cycles, then remained fixed. The diameter increases to ~480 % in wet state but decreases to the original size in dry state for 10 cycles. When the fabric with 90 wt% SQCuS@P-0.50 SCFs was used as a water evaporator, the water evaporation rate and efficiency were 1.68 kg·m-2·h-1 and 102 % under 1 sun irradiation. This work provides a simple and ecofriendly strategy for fabricating photothermal fabrics by designing and preparing composite fibers.
RESUMO
To solve the inherent problems of conductive hydrogels, such as relatively low mechanical properties and fatigue resistance, inability to work after water loss, and difficulty weaving. In this study, the borax-crosslinked polyvinyl alcohol/k-carrageenan (kC) conducting hydrogels (BPKKOH) were prepared by a simple one-pot method, and KOH treatment was used instead of the cumbersome and time-consuming freeze-thaw cycle to improve the comprehensive properties. The KOH treatment increased the hydrogel hydrogen bonding content by 7.72 % and synergized with the induction of kC by K+ to enhance the tensile and compressive strengths by 8.12 and 34.6 times, respectively. Meanwhile, the BPKKOH hydrogel's fatigue resistance and shape recovery after water loss were improved. Additionally, the BPKKOH hydrogels can be monitored for finger bending, showing clear and stable differences in electrical signals. BPKKOH hydrogels combined with Morse code realize applications in information transmission and encryption/decryption. Notably, introducing KOH ensures the molding and preparation of BPKKOH hydrogel fibers while having good signal responsiveness and monitoring ability. More importantly, it can be woven into fabrics that can be loaded with heavy weights, which has the potential to be directly applied in smart wearables. This work provides new ideas for applying flexible sensors and wearable smart textiles.