RESUMO
This paper reports on the design and experimental validation of a fully-metallic double-ridged waveguide 10 × 10 Rotman lens additively manufactured as a single part. The wide band operation of this quasi-optical beamformer enables us to cover the uplink and downlink frequencies allocated to satellite communications in the K/Ka-band, from 17.3 GHz to 30 GHz. The feeding port design was adjusted to enable vertical printing, thus minimizing the use of supporting structures. A prototype was manufactured and tested. The reported results indicate losses in the range of 0.5 dB in the lower-frequency band and 0.8 dB in the upper-frequency band, including the waveguide transitions added for test purposes. The measured reflection and coupling coefficients remain below -11.5 dB over the operating band. The standard deviation of the residual phase error across the array ports is below 5° in simulation and below 10° in measurements. Array factors synthesized using the scattering parameters confirm the good stability of the beamforming functionality over the wide frequency band analyzed. This monolithic design is a promising step toward more integrated antenna systems, such as a compact dual-stack configuration for planar array design.
RESUMO
A double-layer lens consists of a first gradient-index/geodesic profile in an upper waveguide, partially surrounded by a mirror that reflects the wave into a lower guide where there is a second profile. Here, we derive a new family of rotational-symmetric inhomogeneous index profiles and equivalent geodesic lens shapes by solving an inverse problem of pre-specified focal points. We find an equivalence where single-layer lenses have a different functionality as double-layer lenses with the same profiles. As an example, we propose, manufacture, and experimentally validate a practical implementation of a geodesic double-layer lens that is engineered for a low-profile antenna with a compact footprint in the millimeter wave band. Its unique double-layer configuration allows for two-dimensional beam scanning using the same footprint as an extension of the presented design. These lenses may find applications in future wireless communication systems and sensing instruments in microwave, sub-terahertz, and optical domains.
RESUMO
This paper presents the design and fabrication of a mechanically reconfigurable filter at W band based on the concept of glide symmetry. The tunability is achieved by breaking and regenerating the glide symmetry. The filters are made of two glide-symmetric pieces that can be displaced in a certain direction, and therefore, break the symmetry. The high filtering capacity of these designs is demonstrated by simulation and measurement and can also be adjusted mechanically. The transmission level in the manufactured filter varies from a value between -1 and -2 dB when the filter is in the glide symmetry position to values close to -40 dB in the stop-band when it is in the broken symmetry position. The transmission band obtained in the symmetrical mode is around 20%, but, after breaking the symmetry, it is split into two passbands of 6.5% and 11% separated by a stop-band of 6%. The position, bandwidth, filtering level and filter roll-off can be adjusted for both modes of operation by appropriately selecting the unit cell design parameters and the number of unit cells.
RESUMO
This work studies the propagation characteristics of a rectangular waveguide with aligned/misaligned double-sided dielectric-filled metallic corrugations. Two modes are found to propagate in the proposed double-sided configuration below the hollow-waveguide cutoff frequency: a quasi-resonant mode and a backward mode. This is in contrast to the single-sided configuration, which only allows for backward propagation. Moreover, the double-sided configuration can be of interest for waveguide miniaturization on account of the broader band of its backward mode. The width of the stopband between the quasi-resonant and backward modes can be controlled by the misalignment of the top and bottom corrugations, being null for the glide-symmetric case. The previous study is complemented with numerical results showing the impact of the height of the corrugations, as well as the filling dielectric permittivity, on the bandwidth and location of the appearing negative-effective-permeability band. The multi-modal transmission-matrix method has also been employed to estimate the rejection level and material losses in the structure and to determine which port modes are associated with the quasi-resonant and backward modes. Finally, it is shown that glide symmetry can advantageously be used to reduce the dispersion and broadens the operating band of the modes.
RESUMO
Conformal transformation optics is employed to enhance an H-plane horn's directivity by designing a graded-index all-dielectric lens. The transformation is applied so that the phase error at the aperture is gradually eliminated inside the lens, leading to a low-profile high-gain lens antenna. The physical space shape is modified such that singular index values are avoided, and the optical path inside the lens is rescaled to eliminate superluminal regions. A prototype of the lens is fabricated using three-dimensional printing. The measurement results show that the realized gain of an H-plane horn antenna can be improved by 1.5-2.4 dB compared to a reference H-plane horn.
RESUMO
Dielectric metasurfaces have opened promising possibilities to enable a versatile platform in the miniaturization of optical elements at visible and infrared frequencies. Due to high efficiency and compatibility with CMOS fabrication technology, silicon-based metasurfaces have a remarkable potential for a wide variety of optical devices. Adding tunability mechanisms to metasurfaces could be beneficial for their application in areas such as communications, imaging and sensing. In this paper, we propose an all-silicon reconfigurable metasurface based on the concept of glide symmetry. The reconfigurability is achieved by a phase modulation of the transmitted wave activated by a lateral displacement of the layers. The misalignment between the layers creates a new inner periodicity which leads to the formation of a metamolecule with a new sort of near-field interaction. The proposed approach is highly versatile for developing multifunctional and tunable metadevices at optical frequencies. As a proof of concept, in this paper, we design a bifunctional metadevice, as well as a tunable lens and a controllable beam deflector operating at 1.55 µm.
RESUMO
New high-frequency 5G and satellite communication systems require fully-metallic antennas and electromagnetic components. These components can be implemented with truncated versions of periodic structures. In order to achieve the desired performance of these future devices, it is of crucial importance to have a precise control of the propagation properties, i.e. the frequency dispersion behavior and stop-bands. Here, we demonstrate the potential use of higher symmetries to diminish the frequency dispersion of periodic structures and control the width of stop-bands with a new type of fully-metallic transmission line, which is loaded with holes on a twist-symmetric configuration. Simulated and experimental results confirm the intrinsic link between the propagation characteristics and the symmetries of a periodic structure. Additionally, we provide a definitive explanation of the recently discovered polar glide symmetry and its potential combination with twist symmetries to produce low-dispersive materials and reconfigurable stop-bands. The promising properties of these structures are demonstrated with a fully-metallic reconfigurable filter, which could be used for future high-frequency 5G and satellite communication systems.
RESUMO
In this Letter, we explore the dispersion of spoof surface plasmons supported by a single-layer glide-symmetric structure. This structure consists of an infinitely long double-notched slot perforated in a metal layer. The presence of a degeneracy of the two lowest-order modes at the Brillouin zone boundary, which have non-zero group velocity is explained and experimentally demonstrated. Further, the dependence of the band structure when glide-symmetric configuration is broken is also explored.
RESUMO
This Letter discusses nonresonant modes excited on holey metasurfaces and their influence on the properties of spoof plasmonic states supported by the metasurface when a second surface is placed in its proximity. We consider here a metallic surface with periodic holes drilled in it. The field excited on each hole is projected onto a set of nonresonant modes in order to discuss their relative relevance. While previous simpler models assumed only the presence of the fundamental mode, we show that the simultaneous presence of several modes occurs when the surface is placed next to a metallic plate. Therefore, higher-order modes are responsible for the peculiar physical properties of wave propagation of spoof plasmons between two surfaces, which can lead to new gradient-index flat lenses for transceivers for space communications.
RESUMO
Transformation optics with quasi-conformal mapping is applied to design a Generalized Maxwell Fish-eye Lens (GMFEL) which can be used as a power splitter. The flattened focal line obtained as a result of the transformation allows the lens to adapt to planar antenna feeding systems. Moreover, sub-unity refraction index regions are reduced because of the space compression effect of the transformation, reducing the negative impact of removing those regions when implementing the lens. A technique to reduce the maximum value of the refractive index is presented to compensate for its increase because of the transformation. Finally, the lens is implemented with the bed of nails technology, employing a commercial dielectric slab to improve the range of the effective refractive index. The lens was simulated with a 3D full-wave simulator to validate the design, obtaining an original and feasible power splitter based on a dielectric lens.
RESUMO
In the last decade, a technique termed transformation optics has been developed for the design of novel electromagnetic devices. This method defines the exact modification of magnetic and dielectric constants required, so that the electromagnetic behaviour remains invariant after a transformation to a new coordinate system. Despite the apparently infinite possibilities that this mathematical tool introduces, one restriction has repeatedly recurred since its conception: limited frequency bands of operation. Here we circumvent this problem with the proposal of a full dielectric implementation of a transformed planar hyperbolic lens which retains the same focusing properties of an original curved lens. The redesigned lens demonstrates operation with high directivity and low side lobe levels for an ultra-wide band of frequencies, spanning over three octaves. The methodology proposed in this paper can be applied to revolutionise the design of many electromagnetic devices overcoming bandwidth limitations.
Assuntos
Fenômenos Eletromagnéticos , Lentes , Óptica e Fotônica/instrumentação , Refratometria/instrumentação , Simulação por Computador , Modelos EstatísticosRESUMO
Transformation electromagnetics has opened possibilities for designing antenna structures. Using an analytical approach, we demonstrate here how directive antenna radiation can be achieved from an omnidirectional source behind a diffuse surface. This diffuse surface has been obtained by an optical transformation of a Luneburg lens. Two different transformation approaches have been proposed (polynomial and sinusoidal), and for both cases, the resulting material properties have been simplified to ease the fabrication by using all-dielectric media. Therefore, the proposed design has no upper boundary to the operational frequency. Directive radiation has been achieved from thin diffuse structures, which demonstrates promising future possibilities for this technique.
RESUMO
A modified Luneburg lens based on Hamiltonian optical transformation with planar feeds is proposed in this Letter. The lens, made of conventional all-dielectric materials, does not have any kind of anisotropy. Therefore, in theory, its bandwidth of operation has no upper frequency limitations in contrast with recent designs utilizing metamaterials. Results for wide-angle radiation and broadband operation are presented.