Cooking methods determine chemical composition and functional properties of squash blossoms: A study of microstructural and bioaccessibility changes.

This research aimed to evaluate the effect of different cooking methods (boiling, stir-frying, and steaming) on the microstructure, moisture, fat, protein, and glucose-derived carbohydrate contents, and the bioactive compounds (total carotenoids: CAR, total chlorophyll: CHLO, and total phenolic compounds: TPC) and antioxidant capacity (AC) of squash blossoms. Furthermore, we characterized polyphenolic compounds using HPLC and evaluated their bioaccessibility via in vitro digestions. Our results show that steaming and boiling do not affect moisture content. Only stir-frying decreased (p < 0.05) this parameter by 8 %. Additionally, the cooking methods increased (p < 0.05) protein and glucose-derived carbohydrate contents. All cooking methods changed the microstructure of the blossoms, probably due to the thermal and mechanical variations that result in moisture loss and degradation of cell wall components. As for the functional properties, boiling caused a greater loss of TPC (up to 96 %) and AC (up to 91 %). Stir-frying caused the greatest loss of CAR (up to 81 %) and CHLO (up to 84 %). The in vitro digestion assays showed changes in the bioaccessibility of CAR, CHLO, TPC, and AC in the cooked flowers compared to the fresh ones. Finally, kaempferol and gallic acid were the most resistant polyphenols to the cooking methods and in vitro digestion.

Improving Pea Protein Emulsifying Capacity by Glycosylation to Prepare High-Internal-Phase Emulsions.

Pea protein has been extensively studied because of its high nutritional value, low allergenicity, environmental sustainability, and low cost. However, the use of pea protein in some food products is hindered due to the low functionality of pea protein, especially as an emulsifier. High-internal-phase emulsions (HIPEs) are attracting attention because of their potential application in the replacement of hydrogenated plastic fats in foods. In this study, the use of glycated pea protein isolate (PPI) as an emulsifier to prepare HIPEs is proposed. The functionalization of a commercial PPI in two ratios of maltodextrin (MD) (1:1 and 1:2) via glycosylation (15 and 30 min), to act as an emulsifier in HIPEs, is investigated. HIPE properties, such as oil loss and texture, were evaluated and related to microstructural properties. Glycated-PPI-stabilized HIPEs showed high consistency, firmness, viscosity, and cohesiveness values; a tight and homogeneous structure; and physical stability throughout storage. The results showed that emulsions were more stable when using a 1:2 ratio and 30 min of heat treatment. However, the reaction time was more determinant for improving the textural properties when a 1:1 ratio was used for glycosylation than when a 1:2 ratio was used. Glycosylation with MD via the Maillard reaction is a suitable method to enhance the emulsifying and stabilizing properties of PPI.

High Internal Phase Emulsions Preparation Using Citrus By-Products as Stabilizers.

The citrus juice industry produces about 50% of by-products. Citrus pomace (CP) contains many polysaccharides (mainly cellulose and pectin), which could act as stabilizers and emulsifiers. The aim of this work was to obtain high internal phase emulsions (HIPEs) using unmodified CP at different concentrations to valorize citrus by-products. The synergic effect of pea protein isolate (PPI) with CP to stabilize the HIPEs was also studied. HIPEs structure was analyzed using rheological and microscopy studies as well as color and physical stability of the emulsions. According to rheological data, all samples exhibited a solid-like behavior, as elastic modulus (G') was higher than viscous modulus (G'') within the viscoelastic linear region; as % CP and % PPI increased, greater values of G' and apparent viscosity (η) were achieved. Microscopic images showed that oil droplets had a polyhedral shape and were enclosed by a thin layer of CP and PPI. Increasing concentrations of CP and PPI enhanced oil droplets packaging. Emulsions' physical stability was better when adding PPI. The results showed that stable HIPEs with 1.25% of CP and PPI over 0.5% can be obtained. These HIPEs could be used to formulate emulsions for food applications, such as mayonnaises, fillings, or creams.

Providing Stability to High Internal Phase Emulsion Gels Using Brewery Industry By-Products as Stabilizers.

The modern brewing industry generates high amounts of solid wastes containing biopolymers-proteins and polysaccharides-with interesting technological and functional properties. The novelty of this study was to use raw by-product from the brewing industry in the development of high internal phase emulsion (HIPE) gels. Thus, the influence of the emulsion's aqueous phase pH and the by-product's concentration on structural and physical stability of the emulsions was studied. The microstructure was analyzed using cryo-field emission scanning electron microscopy. To evaluate the rheological behavior, oscillatory tests (amplitude and frequency) and flow curves were conducted. Moreover, the physical stability of the emulsions and the color were also studied. The increase in by-product concentration and the pH of the aqueous phase allowed development of HIPE gels with homogeneously distributed oil droplets of regular size and polyhedral structure. The data from the rheology tests showed a more stable structure at higher pH and higher by-product concentration. This study widens the possibilities of valorizing the brewing industry's by-products as stabilizers when designing emulsions.

Use of Oleogels to Replace Margarine in Steamed and Baked Buns.

Bakery products are usually formulated with solid fats, like margarines and shortenings, which contain high levels of saturated and trans-fatty acids and have negative effects on human health. In this study, hydroxypropyl methylcellulose (HPMC) and xanthan gum (XG) were used as oleogelators to prepare oleogels, using sunflower and olive oil, as substitutes for margarine in baked or steamed buns. The effect of oleogels on the physical properties of the buns was evaluated by analyzing the crumb structure, specific volume, height, and texture. In addition, a triangular discriminatory sensory test was conducted, and lipid digestibility was assessed through in vitro digestion studies. Replacement of margarine with oleogels produced steamed buns with no differences in the crumb structure, volume, height, and texture; however, in baked buns, a less porous and harder structure was produced. No differences in texture were observed between the margarine buns and buns made with oleogels when the triangular test was conducted. The extent of lipolysis was not affected when margarine was replaced by oleogels in the baked and steamed buns. The results suggest that using oleogels instead of margarine in buns could represent an interesting strategy to prepare healthier bakery products.

Interactions between Blackcurrant Polyphenols and Food Macronutrients in Model Systems: In Vitro Digestion Studies.

Blackcurrant pomace, rich in fiber and polyphenols, can be used as added-value ingredient for food formulation. However, the bounding of polyphenols to pomace and the interactions that take place with food nutrients modify polyphenol bioaccessibility. This work studied the interactions between polyphenols and the main macronutrients in foods, and the changes that occurred during in vitro digestion, using model systems. Model systems were formulated with (i) water, (ii) wheat starch, (iii) olive oil, (iv) whey protein, and (v) a model combining all the ingredients. Polyphenols were added from two sources: as pomace and as a polyphenolic pomace extract. Interactions between polyphenols and macronutrients were studied using light microscopy; total phenolic content (TPC) and antioxidant capacity (AC) were determined before and after the in vitro digestion process. Lastly, the bioaccessibility of the samples was calculated. Polyphenols incorporated into the model systems as pomace increased their bioaccessibility if compared to polyphenols added as extract. For single-nutrient model systems formulated with pomace, the bioaccessibility was higher than when the system contained all the nutrients. Of all the components studied, the greatest effect on bioaccessibility was observed for proteins.

Chitosan and crosslinked chitosan nanoparticles: Synthesis, characterization and their role as Pickering emulsifiers.

Chitosan has been modified in order to produce nanoparticles with promising characteristics in diverse food applications, e.g. Pickering emulsions. Chitosan deprotonation and ionic crosslinking with tripolyphosphate were assessed in this work. Chitosan nanoparticles produced by these two methods were characterized according to surface charge, particle size distribution, chemical structure, wettability and microstructure imaging. The nanoparticles' performance in the formation of oil-in-water Pickering emulsions was studied by physicochemical and rheological assays. Chitosan nanoparticles produced by amino deprotonation were larger and resulted in emulsions with larger oil droplets, with rheological behavior of the emulsions being greatly affected by increasing concentration of chitosan, which formed a network structure in the continuous phase. On the contrary, the tripolyphosphate-crosslinked chitosan nanoparticles were smaller and produced emulsions with smaller droplets, which remained less viscous even when chitosan concentration was increased and showed evidences of Pickering stabilization when analyzed by microscopy techniques.

Optimizing High Pressure Processing Parameters to Produce Milkshakes Using Chokeberry Pomace.

High hydrostatic pressure is a non-thermal treatment of great interest because of its importance for producing food with additional or enhanced benefits above their nutritional value. In the present study, the effect of high hydrostatic pressure processing parameters (200-500 MPa; 1-10 min) is investigated through response surface methodology (RSM) to optimize the treatment conditions, maximizing the phenol content and antioxidant capacity while minimizing microbiological survival, in milkshakes prepared with chokeberry pomace (2.5-10%). The measurement of fluorescence intensity of the samples was used as an indicator of total phenolic content and antioxidant capacity. The results showed that the intensity of the treatments had different effects on the milkshakes. The RSM described that the greatest retention of phenolic compounds and antioxidant capacity with minimum microbiological survival were found at 500 MPa for 10 min and 10% (w/v) chokeberry pomace. Therefore, this study offers the opportunity to develop microbiologically safe novel dairy products of high nutritional quality.

Pork meat prepared by different cooking methods. A microstructural, sensorial and physicochemical approach.

The influences of four different cooking methods-pan, ohmic, vacuum and sous vide-were studied with regard to the microstructural, sensorial and physicochemical characteristics of pork meat. The end point temperature to all cooking methods was 70 °C. Pan cooking resulted in a softer meat with higher overall liking by the consumers, and ohmic cooking produced firmer (p < .05) meats and myofibrils, with higher alignment compared to the pan-cooked meat as well as a golden colour. Sous vide-cooked meats were perceived as insipid, while vacuum-cooked meats showed loss of structure and were perceived as drier (p < .01) and paler (p < .01). No statistically significant differences were found for cooking loss and water-holding capacity (p > .05). The results suggest that consumers preferred pan-cooking, as they described these samples as juicy, tender and tasty. Ohmic-cooked meat, which required shorter cooking times, showed similar characteristics to pan-cooked meat and could be used as alternative to pan cooking in the catering industry.

Composition and physicochemical properties of dried berry pomace.

BACKGROUND: Berry pomace is a valuable but little used by-product of juice manufacturing. When processed to a stable fruit powder, the composition differs from that of the whole fruit. To facilitate application in foods, a detailed knowledge of its composition and physicochemical properties is essential. RESULTS: Blackcurrant, redcurrant, chokeberry, rowanberry and gooseberry were selected for analysis. All pomace powders had a high fibre content (> 550 g kg-1 ) and a fat content of up to 200 g kg-1 . Despite identical milling conditions, the particle sizes of the pomace powders varied. This can be traced back to seed content and brittleness, which also becomes apparent with respect to surface characteristics. Blackcurrant pomace powder differed from other varieties in terms of its low water-binding capacity (3.2 g g-1 ) and a moderate moisture uptake, whereas chokeberry pomace powder showed the highest polyphenol content and rowanberry pomace powder was rich in flavonols. CONCLUSION: The results obtained in the present study provide a comprehensive overview of the properties of berry pomace powder and allow conclusions to be made regarding their applicability for use in complex food systems. © 2018 Society of Chemical Industry.

Improving the Antimicrobial Power of Low-Effective Antimicrobial Molecules Through Nanotechnology.

The objective of this work was on the one hand to assess the antibacterial activity of amines anchored to the external surface of mesoporous silica particles against Listeria monocytogenes in comparison with the same dose of free amines as well. It was also our aim to elucidate the mechanism of action of the new antimicrobial device. The suitability of silica nanoparticles to anchor, concentrate and improve the antimicrobial power of polyamines against L. monocytogenes has been demonstrated in a saline solution and in a food matrix. Moreover, through microscope observations it has been possible to determine that the attractive binding forces between the positive amine corona on the surface of nanoparticles and the negatively charged bacteria membrane provoke a disruption of the cell membrane. The surface concentration of amines on the surface of the nanoparticles is so effective that immobilized-amines were 100 times more effective in killing L. monocytogenes bacteria than the same amount of free polyamines. This novel approach for the creation of antimicrobial nanodevices opens the possibility to put in value the antimicrobial power of natural molecules that have been discarded because of its low antimicrobial power. PRACTICAL APPLICATION: Consumers demand for high-quality products, free from chemical preservatives, with an extended shelf-life. In this study, a really powerful antimicrobial agent based on a nanomaterial functionalized with a non-antimicrobial organic molecule was developed as a proof of concept. Following this approach it could be possible to develop a new generation of natural and removable antimicrobials based on their anchoring to functional surfaces for food, agricultural or medical purposes.

Using different fibers to replace fat in sponge cakes: In vitro starch digestion and physico-structural studies.

This study assessed the effect of substituting 30% of fat by soluble, insoluble fiber, or a mix of both fibers in sponge cake quality, structure, acceptability, and starch digestibility. The apparent viscosity of the different formulations was measured and micro-baking was simulated. Texture profile tests were carried out and the crumb structure was examined. In vitro digestion was performed to study the digestibility of starch and a sensory test was carried out to know consumer acceptance. The soluble fiber (maltodextrin) affected the structure and quality of the cakes less than the insoluble fiber (potato fiber) and the use of soluble fiber in the formulation resulted in lower glucose release under in vitro conditions. Moreover, the consumer did not find differences among the control cake and the cakes prepared with soluble fiber. Considering the results as a whole, soluble fiber may be used for partial replacement of fat in sponge cake formulations and may constitute an appropriate strategy for obtaining healthy sponge cakes.

Structural changes in biscuits made with cellulose emulsions as fat replacers.

Biscuits are a popular baked cereal food much appreciated by consumers. In the last few years, cellulose derivatives have been successfully used as fat replacers in biscuits. In this way, not only is the total amount of fat reduced but also the saturated fatty acids and the trans fatty acids are eliminated. The aim of this study is to increase understanding of the functionality of different cellulose ether emulsions used as fat replacers in biscuits. For this purpose, three emulsions with different cellulose ethers were designed: hydroxypropyl methylcellulose, methylcellulose and methylcellulose with greater methoxyl substitution (MCH). The microstructure and textural properties of the doughs and biscuits prepared with these emulsions were studied and the effects of cellulose types and glycerol as textural improver were also analysed. The results showed that the incorporation of glycerol in the doughs made with methylcellulose and hydroxypropyl methylcellulose cellulose emulsions seems to make the dough softer, bringing the values closer to those of the control dough; however, this effect disappears once the dough is baked. The presence of glycerol does not seem to have an effect on the hardness of the doughs and biscuits made using the methylcellulose with greater methoxyl substitution (MCH) emulsion.

New hydrocolloid-based emulsions for replacing fat in panna cottas: a structural and sensory study.

BACKGROUND: Dairy desserts are popular traditional products, but because of their high calorie or fat content, they can be unsuitable for people who have certain dietary requirements. The aim of this study was to design panna cottas with similar organoleptic and textural properties to the traditional ones but with a lower fat content, by replacing part of the cream with new emulsions prepared with hydrocolloids (cellulose ethers), namely methylcellulose (MC) and hydroxypropyl methylcellulose (HPMC). RESULTS: Incorporating the MC and HPMC emulsions modified the textural properties (firmness and stiffness) of the panna cottas. Regarding the sensory results, the panna cottas prepared with the MC and HPMC emulsions were considered lumpy and soft respectively. CONCLUSION: Considering the results as a whole, the cellulose type and the amount of cream are factors to take into account. Although the texture and taste of the control panna cotta are better than those of the panna cottas prepared with the MC and HPMC emulsions, it is possible to replace 75% of the cream in traditional panna cottas with HPMC emulsion and obtain good consumer acceptance and purchase intention. The panna cottas with 75% substitution by HPMC emulsion were described as creamy, with smooth appearance and moist mouth feel. © 2017 Society of Chemical Industry.

Oil-in-water emulsions stabilised by cellulose ethers: stability, structure and in vitro digestion.

The effect of cellulose ethers in oil-in-water emulsions on stability during storage and on texture, microstructure and lipid digestibility during in vitro gastrointestinal digestion was investigated. All the cellulose ether emulsions showed good physical and oxidative stability during storage. In particular, the methylcellulose with high methoxyl substituents (HMC) made it possible to obtain emulsions with high consistency which remained almost unchanged during gastric digestion, and thus could enhance fullness and satiety perceptions at gastric level. Moreover, the HMC emulsion slowed down lipid digestion to a greater extent than a conventional protein emulsion or the emulsions stabilised by the other cellulose ethers. Therefore, HMC emulsions could be used in weight management to increase satiation capacity and decrease lipid digestion.

Importance of consumer perceptions in fiber-enriched food products. A case study with sponge cakes.

Sponge cakes enriched with fiber from different sources (maltodextrin, wheat, apple, blackcurrant and a mixture of potato and Plantago ovata) were studied. Profiling of the different cakes was carried out, first using a check-all-that-apply (CATA) question then evaluating the consumers' likings using a hedonic scale. The consumers also completed a nutrition knowledge (NK) questionnaire that was used to classify them according to their NK level. The instrumental texture of the cakes was evaluated by the texture profile analysis (TPA) method. The consumers' response was not linked to their NK level, but it mainly depended on the importance they gave to the cakes' distinctive sensory characteristics. In general, liking increased for samples considered easy to chew, spongy, soft and sweet, and decreased for samples perceived as tasteless, dry or having a fruity or an odd flavor. The sponge cakes containing maltodextrin or wheat fiber, which mostly resembled a conventional cake, were the most liked in general. Those containing the other three fibers were rejected by part of the consumers, for being tasteless in the case of potato plus Plantago ovata fiber, for being dry and doughy in the case of apple fiber and for having an odd flavor in the case of blackcurrant fiber.

Designing dairy desserts for weight management: Structure, physical properties and in vitro gastric digestion.

The first aim of this study was to observe the effect of adding dairy proteins and reducing the cream content in order to obtain healthier dairy desserts for use in weight management. The extra-whey protein low-cream sample had the densest, firmest matrix, which is related to increased satiety. The second aim was to investigate the in vitro gastric digestion behavior of whey and casein proteins in a heat-treated semisolid real food. The extra-casein protein sample matrix broke down more slowly than the others because the caseins clotted at the gastric pH. Despite being heated, the whey proteins in the panna cottas were more resistant to pepsin digestion than caseins; this is related with a higher satiety capacity. These findings suggest that the combination of reducing fat content (to obtain a reduced energy density product) and adding whey protein (to increase satiety capacity) allows obtaining dairy desserts for weight management.

Designing a Clean Label Sponge Cake with Reduced Fat Content.

The fat in a sponge cake formulation was partially replaced (0%, 30%, 50%, and 70%) with OptiSol™5300.This natural functional ingredient derived from flax seeds, rich in fiber and alpha-linoleic acid, provides a natural substitute for guar and xanthan gums, avoiding E-numbers on labels. The structure and some physicochemical properties of the formulations were examined, sensory analysis was conducted and changes in starch digestibility due to adding this ingredient were determined. Increasing quantities of OptiSol™5300 gave harder cakes, with less weight loss during baking, without affecting the final cake height. There were no significant differences (P > 0.05) in texture, flavor and overall acceptance between the control and the 30% substitution cake, nor in the rapidly digestible starch values. Consequently, replacing up to 30% of the fat with OptiSol™5300 gives a new product with health benefits and a clean label that resembles the full-fat sponge cake.

High hydrostatic pressure as a method to preserve fresh-cut Hachiya persimmons: A structural approach.

The "Hachiya" persimmon is the most common astringent cultivar grown in California and it is rich in tannins and carotenoids. Changes in the microstructure and some physicochemical properties during high hydrostatic pressure processing (200-400 MPa, 3 min, 25 ℃) and subsequent refrigerated storage were analyzed in this study in order to evaluate the suitability of this non-thermal technology for preservation of fresh-cut Hachiya persimmons. The effects of high-hydrostatic pressure treatment on the integrity and location of carotenoids and tannins during storage were also analyzed. Significant changes, in particular diffusion of soluble compounds which were released as a result of cell wall and membrane damage, were followed using confocal microscopy. The high-hydrostatic pressure process also induced changes in physicochemical properties, e.g. electrolyte leakage, texture, total soluble solids, pH and color, which were a function of the amount of applied hydrostatic pressure and may affect the consumer acceptance of the product. Nevertheless, the results indicate that the application of 200 MPa could be a suitable preservation treatment for Hachiya persimmon. This treatment seems to improve carotenoid extractability and tannin polymerization, which could improve functionality and remove astringency of the fruit, respectively.

Tissue microstructure, physicochemical properties, and bioactive compound locations in different sweet pepper types.

This article focuses on the location and content of some bioactive compounds in three different California sweet pepper types (red, green and yellow). The location was studied using different microscopic techniques, such as scanning electron microscopy at low temperatures (cryo-SEM) and light microscopy. Several physicochemical properties of the samples (carotenoid content, total soluble phenol content, antioxidant activity, dietary fibre content, total soluble solids content, pH and textural properties) were also examined. The degree of compaction and structuring of the cell wall was found to be indirectly related to solute transport at the cellular level and directly related to total dietary fibre content. The three types of pepper displayed formation and accumulation of phenolic aggregates and an active circulation of solutes. Yellow pepper tissue had the most labile cell walls and the highest transport of solutes. Red peppers could be suitable for obtaining extracts rich in carotenoid compounds, yellow peppers for obtaining phenolic compounds with a high antioxidant activity and green peppers for extracts with high dietary fibre content.