Assessing peri-implant bone microarchitecture: conventional vs. osseodensification drilling - ex vivo analysis.

The aim was to evaluate primary implant stability and bone microarchitecture in two drilling situations, by comparing the conventional technique (CT) and osseodensification (OD) (Versah Burs - Jackson - Mississippi - USA). The implant insertion torque (IT), implant stability quotient (ISQ), and the peri-implant trabecular microstructure were assessed on bone fragments obtained from pig's tibia (n=12), divided between CT (n=6) and OD (n=6). After the drilling procedure, the implants were installed (3.5x8.5 mm, Epikut - SIN - São Paulo - Brazil). The IT and ISQ were measured using a digital torque wrench and resonance frequency analysis. Then, the bone fragments containing the implants were removed with a trephine and analyzed by Microtomography (µCT, 8.0 µm). The comparison between groups was performed using the unpaired t-test (α=0.05). The results revealed that OD promotes a higher insertion torque (CT: 7.67±2.44 Ncm; OD: 19.78±5.26 Ncm) (p=0.0005), although ISQ was not different (CT: 61.33±4.66; OD: 63.25±4.58) (p=0.48). There was a significant increase in peri-implant bone volume (CT: 23.17±3.39 mm3; OD: 32.01±5.75 mm3) (p=0.008), and trabecular parameters: separation (CT: 0.4357±0.03 mm; OD: 0.3865±0.04 mm) (p=0.0449), number (CT: 1.626±0.18 1/mm; OD: 1.946±0.13 1/mm) (p=0.007), and thickness (CT: 0.1130±0.009 mm; OD: 0.1328±0.015 mm) (p=0.02). Structure model index (SMI) data demonstrate no significant differences between groups (CT: 1.7±0.2; OD: 1.4±0.4) (p=0.12). In conclusion, OD increases the insertion torque values and promotes beneficial changes regarding bone microarchitecture compared with CT, revealing more peri-implant bone volume with consequent higher primary stability.

Desquamative gingivitis treatment with topical tacrolimus applied to a custom tray: an open trial regarding its efficacy on patients' symptoms.

OBJECTIVE: To evaluate the efficacy of topical tacrolimus offered on a custom tray to treat desquamative gingivitis (DG). STUDY DESIGN: Eighteen patients with symptomatic DG related to oral lichen planus (OLP) or mucous membrane pemphigoid (MMP) were selected, of which 13 completed the study. Periodontal treatment was followed by the fabrication of a custom silicone tray to apply a tacrolimus gel formulation (0.1%). Clinical evaluation (complaint of pain and burning - visual analog scale from 0 to 10; and the presence of erythema, desquamation, vesicle/blister, erosion, ulcer, and bleeding) was performed by the same examiner on day 1, and every 15 days for 90 days. RESULTS: Total remission was found in 4 patients (30.76%). Partial remission was found in 69.24% of the patients, classified with an excellent (30.76%), good (30.76%), and regular (7.69%) recovery, respectively. There was a reduction of about 60% in pain and 65% in burning sensation complaints. Wilcoxon test revealed significant differences between pre- and post-treatment pain and burning sensation symptoms (P < .01). CONCLUSION: Topical application of 0.1% tacrolimus gel was effective in the treatment of DG in controlling pain and burning sensation, leading to the clinical remission of gingival lesions in patients with OLP and MMP.

Assessing peri-implant bone microarchitecture: conventional vs. osseodensification drilling - ex vivo analysis

Abstract: The aim was to evaluate primary implant stability and bone microarchitecture in two drilling situations, by comparing the conventional technique (CT) and osseodensification (OD) (Versah Burs - Jackson - Mississippi - USA). The implant insertion torque (IT), implant stability quotient (ISQ), and the peri-implant trabecular microstructure were assessed on bone fragments obtained from pig's tibia (n=12), divided between CT (n=6) and OD (n=6). After the drilling procedure, the implants were installed (3.5x8.5 mm, Epikut - SIN - São Paulo - Brazil). The IT and ISQ were measured using a digital torque wrench and resonance frequency analysis. Then, the bone fragments containing the implants were removed with a trephine and analyzed by Microtomography (µCT, 8.0 µm). The comparison between groups was performed using the unpaired t-test (α=0.05). The results revealed that OD promotes a higher insertion torque (CT: 7.67±2.44 Ncm; OD: 19.78±5.26 Ncm) (p=0.0005), although ISQ was not different (CT: 61.33±4.66; OD: 63.25±4.58) (p=0.48). There was a significant increase in peri-implant bone volume (CT: 23.17±3.39 mm3; OD: 32.01±5.75 mm3) (p=0.008), and trabecular parameters: separation (CT: 0.4357±0.03 mm; OD: 0.3865±0.04 mm) (p=0.0449), number (CT: 1.626±0.18 1/mm; OD: 1.946±0.13 1/mm) (p=0.007), and thickness (CT: 0.1130±0.009 mm; OD: 0.1328±0.015 mm) (p=0.02). Structure model index (SMI) data demonstrate no significant differences between groups (CT: 1.7±0.2; OD: 1.4±0.4) (p=0.12). In conclusion, OD increases the insertion torque values and promotes beneficial changes regarding bone microarchitecture compared with CT, revealing more peri-implant bone volume with consequent higher primary stability.

Resumo O objetivo deste estudo foi avaliar a estabilidade de implante e a microarquitetura óssea em duas técnicas de fresagem, comparando a técnica convencional (CT) e a osseodensificação (OD) (Versah Burs - Jackson - Mississippi - EUA). O torque de inserção do implante (IT), quociente de estabilidade primária (ISQ) e a estrutura trabecular peri-implantar foram avaliados em fragmentos ósseos obtidos de tíbia de porco (n=12), divididos entre CT (n=6) e OD (n=6). Após o procedimento de fresagem, foram instalados implantes (3,5x8,5 mm, Epikut - SIN - São Paulo - Brasil). O IT e o ISQ foram aferidos por meio de um torquimetro digital e análise de frequência de ressonância. Em seguida, os fragmentos ósseos contendo os implantes foram removidos com trefina e analisados ​​por microtomografia computadorizada (µCT, 8,0 µm). A comparação entre os grupos foi realizada por meio do teste-t não-pareado (α=0.05). Os resultados revelaram que a OD promove maior torque de inserção (CT: 7,67 ± 2,44º Ncm; OD: 19,78 ± 5,26 Ncm) (p=0,0005), embora a estabilidade primária não tenha sido diferente (CT: 61.33 ± 4.66; OD:63.25 ± 4.58) (p=0,48). Houve um aumento significativo no volume ósseo peri-implantar (CT: 23,17±3,39 mm3; OD: 32,01±5,75 mm3) (p=0,0089) e parâmetros trabeculares: separação (CT: 0,4357 ± 0,03 mm; OD: 0,3865 ± 0,04 mm) (p=0,0449), número (CT: 1,626 ± 0,18 1/mm; OD: 1,946 ± 0,13 1/mm) (p=0,007) e espessura (CT: 0,1130 ± 0,009 mm; OD: 0,1328 ± 0,015 mm) (p=0,02) O índice de modelo estrutural (SMI) não demostrou diferença estatisticamente significativa (p=0.1228). Concluindo, OD apresenta maiores valores de torque de inserção e promove mudanças benéficas na microarquitetura óssea em comparação com a TC, revelando maior volume ósseo peri-implantar.

Effect of micro-CT acquisition parameters and individual analysis on the assessment of bone repair.

This study aimed to investigate whether two acquisition parameters, voxel size and filter thickness, used in a micro-computed tomography (micro-CT) scan, together with the examiner's experience, influence the outcome of bone repair analysis in an experimental model. Bone defects were created in rat tibiae and scanned using two voxel sizes of 6- or 12-µm and two aluminum filter thickness of 0.5- or 1-mm. Then, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) were analyzed twice by two groups of operators: experienced and inexperienced examiners. For BV/TV, no significant differences were found between scanning voxel sizes of 6 and 12 µm for the experienced examiners; however, for the inexperienced examiners, the analysis performed using a 12-µm voxel size resulted in higher BV/TV values (32.4 and 32.9) than those acquired using a 6-µm voxel size (25.4 and 24.8) (p < 0.05). For Tb.Th, no significant differences between the analyses performed by experienced and inexperienced groups were observed when using the 6-µm voxel size. However, inexperienced examiners' analysis revealed higher Tb.Th values when using the 12-µm voxel size compared with 6 µm (0.05 vs. 0.03, p < 0.05). Filter thickness had no influence on the results of any group. In conclusion, voxel size and operator experience affected the measured Tb.Th and BV/TV of a region with new bone formation. Operator experience in micro-CT analysis is more critical for BV/TV than for Tb.Th, whereas voxel size significantly affects Tb.Th evaluation. Operators in the initial phases of research training should be calibrated for bone assessments.

Cortical microarchitecture and remodeling-associated gene expression related to oral cancer prognosis.

The objective of this study was to assess the remodeling-associated gene expression in the mandible of patients diagnosed with oral squamous cell carcinoma (OSCC), investigating the cortical microarchitecture, and their influence on disease-free survival (DFS) and overall survival (OS) rates. A total of twenty-four patients who underwent mandibulectomy for OSCC treatment had two bone fragments harvested from the mandible for gene expression (RANK, RANKL, OPG, and SOST), and microarchitecture analysis, including bone volume, surface, mineral density, degree of anisotropy, and fractal dimension. The prognosis of the patients was assessed. The results revealed that RANK, RANKL, and SOST were predominantly downregulated, while OPG was completely downregulated. Tumors located adjacent to the posterior region of the mandible (p = 0.02), with a bone mineral density below 1.03 g/cm3 HA (p = 0.001), and a bone volume less than 86.47% (p = 0.03) were associated with poor outcomes. In conclusion, bone-remodeling-associated genes exhibited downregulation in the cortex of the mandible in OSCC patients. Additionally, the tumor's location within the mandible, bone volume, and cortical bone mineral density were identified as factors impacting DFS.

Fractal analysis of the mandible cortical bone: correlation among fractal dimension values obtained by two processing methods from periapical radiograph and micro-computed tomography with cone-beam computed tomography.

The objectives of the present study were to assess Fractal Dimension (FD) values in the mandible cortical bone obtained from digital periapical radiographs (DPR), high-resolution microtomography (µCT), and cone-beam computed tomography (CBCT), by two processing methods: binarization (FD.b) and grayscale-based method (FD.f) and, finally, to identify the correlation among these values with other micro-architectural parameters. For this, a prospective study was conducted on 18 healthy individuals (mean age 23 ± 2.4 years old) who underwent third molar extraction. Pre-operative CBCT scans were conducted, bone fragments were removed from the retro-molar region, and DPR and µCT were performed on those bone samples. FD.b and FD.f values were calculated using three parasagittal sections for CBCT, one image for DPR, and three sections for µCT. The 3D bone microarchitecture was analyzed in µCT (voxel size: 19 µm). As a result, FD.b mean values of 1.55 ± 0.02 and 1.80 ± 0.01 were obtained for CBCT and µCT, respectively. Furthermore, FD.f mean values of 1.22 ± 0.12 for DPR, 0.99 ± 0.04 for CBCT, and 1.30 ± 0.07 for µCT were obtained. Both FD.b and FD.f values showed a good agreement. FD.f was negatively correlated with the standard deviation of the mean gray value (p = 0.003) for DPR and intra-cortical bone surface (p = 0.02) for µCT. In conclusion, image processing with or without binarization revealed different values for FD, although showing agreement. The grayscale-based method retrieved FD values correlated with the gray levels and the cortical porous network, which means that FD can be a valuable index for mandibular cortical bone evaluation. FD is associated with mineralization and microarchitecture. Nevertheless, there was no correlation between FD values obtained from low- (DPR) and high-resolution (µCT) X-ray modalities with FD obtained from the in vivo CBCT.

Fractal dimension, lacunarity, and cortical thickness in the mandible: Analyzing differences between healthy men and women with cone-beam computed tomography.

Purpose: The objective of this study was to assess the fractal dimension, lacunarity, trabecular microarchitecture parameters, and cortical linear measurements in the mandibles of male and female individuals to identify differences between them. Materials and Methods: In total, 116 cone-beam computed tomography scans of healthy individuals of different ages (57 men and 59 women, aged between 20 and 60 years) were selected. The following bone parameters were measured: 1) buccal, lingual, and basal cortical bone thickness in 5 standard parasagittal sections (the midline, the left and right sides of the lower lateral incisors, and the left and right sides of the lower canines); 2) the bone volume fraction of 10 sequential axial sections from each patient by creating a volume of interest in the area between the lower canines; and 3) fractal dimension and lacunarity using grayscale images of the same region of the volume of interest in the anterior mandible. Spearman correlation coefficients and the Mann-Whitney test were used. Results: A significant and positive correlation was found between age and cortical thickness, especially in the region of the central incisors. Significant differences between sexes in terms of fractal dimension, lacunarity, and bone volume were found. Women revealed lower fractal dimension values and higher lacunarity and bone volume ratio values than men. Conclusion: Fractal dimension, lacunarity, trabecular bone volume, and cortical thickness were different between men and women of different ages.

Fractal analysis of dental periapical radiographs: A revised image processing method.

OBJECTIVE: To assess trabecular bone structure as calculated with fractal analysis by 2 binarization processes: White and Rudolph's original method (WR.o) and a revised version (WR.r). Fractal dimension (FD) values calculated with WR.r (FD.r) and a gray-scale-based method (FD.f) were also compared. FD, histogram parameters, and lacunarity were compared by dentate status, jaw location, and sex. STUDY DESIGN: Regions of interest from digital periapical radiographs were defined below the teeth roots and in the edentulous sites of 37 patients. Histograms were assessed for pixel values. Binarization was performed with WR.o and then with WR.r, in which the outliers were removed. FD was assessed using WR.r (FD.r) and (FD.f). Histograms were assessed to obtain pixel values. Lacunarity was calculated. RESULTS: WR.r revealed fewer trabeculae, branches, and junctions than WR.o (P < .0001). The majority of the mean differences between FD.r and FD.f were within the 95% CI. Dentate areas had greater mean gray levels than partially edentulous areas (P = .0027). FD.f was higher in the mandible (P = .01), but gray-level SD (P < .0001) and lacunarity (P = .02) were greater in the maxilla. FD.f and lacunarity were higher (P = .0005) and lower (P = .0014) in males, respectively. CONCLUSION: WR.r was effective in revealing skeletonized bone trabeculae by removing non-trabecular noise. FD.r and FD.f revealed good agreement. FD.f, histogram parameters, and lacunarity differed based on dentate status, jaw location, and sex.

Cortical microarchitecture and remodeling-associated gene expression related to oral cancer prognosis

Abstract The objective of this study was to assess the remodeling-associated gene expression in the mandible of patients diagnosed with oral squamous cell carcinoma (OSCC), investigating the cortical microarchitecture, and their influence on disease-free survival (DFS) and overall survival (OS) rates. A total of twenty-four patients who underwent mandibulectomy for OSCC treatment had two bone fragments harvested from the mandible for gene expression (RANK, RANKL, OPG, and SOST), and microarchitecture analysis, including bone volume, surface, mineral density, degree of anisotropy, and fractal dimension. The prognosis of the patients was assessed. The results revealed that RANK, RANKL, and SOST were predominantly downregulated, while OPG was completely downregulated. Tumors located adjacent to the posterior region of the mandible (p = 0.02), with a bone mineral density below 1.03 g/cm3 HA (p = 0.001), and a bone volume less than 86.47% (p = 0.03) were associated with poor outcomes. In conclusion, bone-remodeling-associated genes exhibited downregulation in the cortex of the mandible in OSCC patients. Additionally, the tumor's location within the mandible, bone volume, and cortical bone mineral density were identified as factors impacting DFS.

Effect of micro-CT acquisition parameters and individual analysis on the assessment of bone repair

Abstract This study aimed to investigate whether two acquisition parameters, voxel size and filter thickness, used in a micro-computed tomography (micro-CT) scan, together with the examiner's experience, influence the outcome of bone repair analysis in an experimental model. Bone defects were created in rat tibiae and scanned using two voxel sizes of 6- or 12-µm and two aluminum filter thickness of 0.5- or 1-mm. Then, bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) were analyzed twice by two groups of operators: experienced and inexperienced examiners. For BV/TV, no significant differences were found between scanning voxel sizes of 6 and 12 µm for the experienced examiners; however, for the inexperienced examiners, the analysis performed using a 12-µm voxel size resulted in higher BV/TV values (32.4 and 32.9) than those acquired using a 6-µm voxel size (25.4 and 24.8) (p < 0.05). For Tb.Th, no significant differences between the analyses performed by experienced and inexperienced groups were observed when using the 6-µm voxel size. However, inexperienced examiners' analysis revealed higher Tb.Th values when using the 12-µm voxel size compared with 6 µm (0.05 vs. 0.03, p < 0.05). Filter thickness had no influence on the results of any group. In conclusion, voxel size and operator experience affected the measured Tb.Th and BV/TV of a region with new bone formation. Operator experience in micro-CT analysis is more critical for BV/TV than for Tb.Th, whereas voxel size significantly affects Tb.Th evaluation. Operators in the initial phases of research training should be calibrated for bone assessments.

Automated bone healing evaluation: New approach to histomorphometric analysis.

This study aimed to assess different approaches for bone healing evaluation on histological images and to introduce a new automatic evaluation method based on segmentation with distinct thresholds. We evaluated the hyperbaric oxygen therapy (HBO) effects on bone repair in type 1 diabetes mellitus rats. Twelve animals were divided into four groups (n = 3): non-diabetic, non-diabetic + HBO, diabetic, and diabetic + HBO. Diabetes was induced by intravenous administration of streptozotocin (50 mg/kg). Bone defects were created in femurs and HBO was immediately started at one session/day. After 7 days, the animals were euthanized, femurs were removed, demineralized, and embedded in paraffin. Histological sections were stained with hematoxylin and eosin (HE) and Mallory's trichrome (MT), and evaluated using three approaches: (1) conventional histomorphometric analysis (HE images) using a 144-point grid to quantify the bone matrix; (2) a semi-automatic method based on bone matrix segmentation to assess the bone matrix percentage (MT images); and (3) automatic approach, with the creation of a plug-in for ImageJ software. The time required to perform the analysis in each method was measured and subjected to Bland-Altman statistical analysis. All three methods were satisfactory for measuring bone formation and were not statistically different. The automatic approach reduced the working time compared to visual grid and semi-automated method (p < .01). Although histological evaluation of bone healing was performed successfully using all three methods, the novel automatic approach significantly shortened the time required for analysis and had high accuracy.

Type I Diabetes Mellitus and Insulin Therapy on Bone Microarchitecture, Composition and Mechanical Properties.

BACKGROUND: The aim of this study was to evaluate the microarchitecture, composition and mechanical properties of cortical bone of rats with type I diabetes mellitus (TIDM) and submitted to insulin therapy (IT). METHODS: Thirty rats were divided into three groups (n=10): non-diabetic, diabetic and diabetic+insulin. TIDM was induced by intravenous injection of streptozotocin. In diabetic+insulin group, 4IU insulin was administered twice per day (1I U at 7 am and 3I U at 7 pm). The animals were euthanized five weeks after TIDM induction; the tibiae were removed and submitted to microcomputed tomography (micro-CT, 8 µm), fourier transform infrared spectroscopy (FTIR) and dynamic microhardness indentation. RESULTS: Micro-CT analysis showed that diabetic group had lower bone surface/tissue volume ratio (BS/BV) (p=0.018), cortical thickness (Ct.Th) (p<0.001) and degree of anisotropy (Ct.DA) (p=0.034) values compared to non-diabetic group. The diabetic group showed lower Ct.Th than diabetic + insulin group (p=0.018). The non-diabetic group had lower fractal dimension (Ct.FD) values compared to diabetic groups (p<0.001). The ATR-FTIR analyses showed lower values for all measured parameters in the diabetic group than the non-diabetic group (amide I ratio: p=0.046; crystallinity index: p=0.038; matrix:mineral ratios - M:MI: p=0.006; M:MIII: p=0.028). The diabetic+ insulin group showed a lower crystallinity index (p=0.022) and M:MI ratio (p=0.002) than nondiabetic and diabetic groups, respectively. The diabetic group showed lower Vickers hardness values than non-diabetic (p<0.001) and diabetic+insulin (p=0.003) groups. CONCLUSION: TIDM negatively affects bone microarchitecture, collagen maturation, mineralization and bone microhardness. Moreover, insulin minimized the effect of TIDM on cortical thickness and organic/mineral matrix.

Implant site preparation-related bone microdamage: An alternative ex vivo analysis of drilling speed protocols / Microdanos ósseos gerados na preparação do sítio de instalação de implantes: uma alternativa para análise ex vivo de diferentes protocolos de velocidade de perfuração

ABSTRACT Objective: The aim of this study was to evaluate bone microdamage in sites prepared for implant placement by using an ex vivo model with three drilling rotation speeds. Methods: Bovine bone ribs were used for the creation of 18 osteotomy sites at different rotation speeds: 1200 rpm, 800 rpm, and 400 rpm. Specimens were stained with xylenol orange and prepared for histological analysis by using fluorescence and polarized light microscopies. Bone microdamage was evaluated by number and based on total bone area, as follows: microfracture density (Fr.D = n/mm2), microcrack morphology (diffuse or linear), and density (Cr.D = n/mm2), and presence of bone chips. To complement the analysis, linear microcracks were assessed by using confocal microscopy for three-dimensional visualization. Results: Bone microdamage on the osteotomy sites included microcracks, diffuse damages, microfracture, and bone chip formation. There was an association between bone microdamage and cancellous bone (p 0.0016), as well as a positive correlation between Fr.D and Cr.D (p 0.05, r 0.54). BM occurrence was not different between the three rotation speeds. In 3D, the height of the microcrack depth was 60.81 µm. Conclusion: Bone microdamage occurs during osteotomy, and the ex vivo model used was effective for the assessment of these biomechanical parameters. In addition, microdamage was not influenced by the drilling rotation speed in this experimental condition.

RESUMO Objetivo: O objetivo desse estudo foi avaliar os microdanos ósseos em locais preparados para a instalação de implantes utilizando um modelo ex vivo acessando três velocidades de rotação de perfuração. Métodos: Fragmentos ósseos de costela bovina foram utilizados para a criação de 18 sítios de osteotomia em diferentes velocidades de rotação: 1200 rpm, 800 rpm e 400 rpm. As amostras foram coradas com Alaranjado de Xilenol e preparadas para análise microscópica em fluorescência e luz polarizada. Os microdanos ósseos foram avaliados em número e calibrados com base na área total óssea: densidade de microfraturas (Fr.D = n/mm2), morfologia (difusa ou linear) e densidade de microtrincas (Cr.D = n / mm2) e presença de espículas ósseas. Para complementar a análise, microtrincas lineares foram avaliadas por meio de microscopia confocal para visualização tridimensional. Resultados: Os microdanos ósseos incluíram microtrincas, danos difusos, microfraturas e formação de espículas. Houve uma associação entre MO e localização em osso esponjoso (p=0,0016), bem como uma correlação positiva entre Fr.D e Cr.D (p=0,05, r = 0,54). A ocorrência de microdanos ósseos não foi diferente entre as três velocidades de rotação utilizadas. Em 3D, a profundidade maior da microfissura atingiu 60,81 µm. Conclusão: Microdanos ósseos ocorrem durante a osteotomia e podem ser acessados em um modelo ex vivo na condução de experimentos em biomecânica. Sugere-se que a presença de microdanos não é influenciada pela velocidade de rotação durante a perfuração.

Cortical Bone Modifications after Radiotherapy: Cortex Porosity and Osteonal Changes Evaluated Over Time.

Aiming to evaluate cortical bone microarchitecture and osteonal morphology after irradiation, twelve male New Zealand rabbits were used. The animals were divided: control group (no radiation-NIr); and 3 irradiated groups, sacrificed after: 7 (Ir7d); 14 (Ir14d) and 21 (Ir21d) days. A single radiation dose of 30 Gy was used. Computed microtomography analyzed the cortical microarchitecture: cortical thickness (CtTh), bone volume (BV), total porosity (Ct.Po), intracortical porosity (CtPo-cl), channel/pore number (Po.N), fractal dimension (FD) and degree of anisotropy (Ct.DA). After scan, osteonal morphology was histologically assessed by means: area and perimeter of the osteons (O.Ar; O.p) and of the Haversian canals (C.Ar; C.p). Microtomographic analysis were performed by ANOVA, followed by Tukey and Dunnet tests. Osteon morphology analyses were performed by Kruskal-Wallis, and test Dunn's. Cortical thickness was significant difference (p<0.010) between the NIr and irradiated groups, with thicker cortex at Ir7d (1.15±0.09). The intracortical porosity revealed significant difference (p<0.001) between irradiated groups and NIr, with lower value for Ir7d (0.29±0.09). Bone volume was lower in Ir14d compared to control. Area and perimeter of the osteons were statistically different (p<0.0001) between NIr and Ir7d. Haversian canals also revealed lower values (p<0.0001) in Ir7d (80.57±9.3; 31.63±6.5) compared to NIr and irradiated groups. Cortical microarchitecture was affected by radiation, and the effects appear to be time-dependent, mostly regarding the osteons morphology at the initial days. Cortex structure in Ir21d revealed similarities to control suggesting that microarchitecture resembles normal condition after a period.

Cortical bone modifications after radiotherapy: cortex porosity and osteonal changes evaluated over time

Abstract Aiming to evaluate cortical bone microarchitecture and osteonal morphology after irradiation, twelve male New Zealand rabbits were used. The animals were divided: control group (no radiation-NIr); and 3 irradiated groups, sacrificed after: 7 (Ir7d); 14 (Ir14d) and 21 (Ir21d) days. A single radiation dose of 30 Gy was used. Computed microtomography analyzed the cortical microarchitecture: cortical thickness (CtTh), bone volume (BV), total porosity (Ct.Po), intracortical porosity (CtPo-cl), channel/pore number (Po.N), fractal dimension (FD) and degree of anisotropy (Ct.DA). After scan, osteonal morphology was histologically assessed by means: area and perimeter of the osteons (O.Ar; O.p) and of the Haversian canals (C.Ar; C.p). Microtomographic analysis were performed by ANOVA, followed by Tukey and Dunnet tests. Osteon morphology analyses were performed by Kruskal-Wallis, and test Dunn's. Cortical thickness was significant difference (p<0.010) between the NIr and irradiated groups, with thicker cortex at Ir7d (1.15±0.09). The intracortical porosity revealed significant difference (p<0.001) between irradiated groups and NIr, with lower value for Ir7d (0.29±0.09). Bone volume was lower in Ir14d compared to control. Area and perimeter of the osteons were statistically different (p<0.0001) between NIr and Ir7d. Haversian canals also revealed lower values (p<0.0001) in Ir7d (80.57±9.3; 31.63±6.5) compared to NIr and irradiated groups. Cortical microarchitecture was affected by radiation, and the effects appear to be time-dependent, mostly regarding the osteons morphology at the initial days. Cortex structure in Ir21d revealed similarities to control suggesting that microarchitecture resembles normal condition after a period.

Resumo Com o objetivo de avaliar a microarquitetura óssea cortical e a morfologia dos osteons após irradiação, foram utilizados doze coelhos machos da Nova Zelândia. Os animais foram divididos: grupo controle (sem radiação-NIr); e 3 grupos irradiados, sacrificados após: 7 (Ir7d); 14 (Ir14d) e 21 (Ir21d) dias. Foi utilizada uma dose única de radiação de 30 Gy. A microtomografia computadorizada analisou a microarquitetura cortical: espessura cortical (CtTh), volume ósseo (BV), porosidade total (Ct.Po), porosidade intracortical (CtPo-cl), número de canal/ poro (Po.N), dimensão fractal (DF) e grau de anisotropia (Ct.DA). Após a varredura, a morfologia dos osteosn foi avaliada histologicamente por meio de: Área e perímetro do osteon (O.Ar; O.p) e dos canais de Havers (C.Ar; C.p). A análise microtomográfica foi realizada por ANOVA, seguida pelos testes de Tukey e Dunnet. As análises morfológicas do osteon foram realizadas por Kruskal-Wallis e testadas por Dunn. A espessura cortical foi diferente (p<0,010) entre os grupos controle e irradiados, com córtex mais espesso no Ir7d (1,15±0,09). A porosidade intracortical revelou diferenças significativas (p<0,001) entre os grupos irradiados e o controle, com menor valor para Ir7d (0,29±0,09). O volume ósseo foi menor no Ir14d em relação ao controle. Área e perímetro do osteon foi diferente (p<0,0001) entre o controle e Ir7d. Os canais haversianos também revelaram valores mais baixos (p<0,0001) em Ir7d (80.57±9.3; 31.63±6.5) em relação ao controle e demais grupos irradiados. A microarquitetura cortical é afetada pela radiação e os efeitos parecem ser dependentes do tempo, principalmente em relação à morfologia dos osteons nos dias iniciais. A estrutura cortical em Ir21d revelou semelhanças com o controle, sugerindo que a microarquitetura se assemelha à condição normal após um período.

Multiscale bone quality analysis in osteoarthritic knee joints reveal a role of the mechanosensory osteocyte network in osteophytes.

Osteophytes - bony outgrowths on joint structures - are found in healthy individuals but are specifically present in late osteoarthritis (OA). Osteophyte development and function is not well understood, yet biomechanical stimuli are thought to be critical. Bone adapts to mechanical forces via the cellular network of osteocytes. The involvement of osteocytes in osteophyte formation and maturation has not been unravelled. Forty-three osteophytes from tibias of 23 OA patients (65 ± 9 years) were analysed. The trabecular bone structure of osteophytes presented with fewer trabeculae of lower bone mineral density compared to subchondral bone. We identified 40% early stage and 60% late stage osteophytes that significantly differed in their trabecular bone characteristics. Osteophyte bone revealed a higher number of osteocytes and a lower number of empty osteocyte lacunae per bone area than the subchondral bone. We found that OA osteophytes consist of younger bone material comprised of woven and lamellar bone with the capacity to develop into a late stage osteophyte potentially via the involvement of the osteocyte network. Our analysis of OA osteophytes implies a transition from woven to lamellar bone as in physiological bone growth within a pathological joint. Therefore, osteophyte development and growth present a valuable research subject when aiming to investigate the osteogenic signalling cascade.

Effects of ionizing radiation on woven bone: influence on the osteocyte lacunar network, collagen maturation, and microarchitecture.

OBJECTIVES: Evaluate the effects of ionizing radiation on microarchitecture, the osteocyte lacunar network, and collagen maturity in a bone repair site. MATERIALS AND METHODS: Bone defects were created on tibias of 20 New Zealand rabbits. After 2 weeks, the animals were randomly divided into (n = 10) NoIr (nonirradiated group) and Ir (irradiated group). In the Ir, the animals received single-dose irradiation of 30 Gy on the tibia and were euthanized after 2 weeks. Bone microarchitecture parameters were analyzed by using micro-CT, and the osteocyte lacunar network, bone matrix, and collagen maturation by histomorphometric analysis. The data were analyzed using unpaired Student's t test (α = 0.05). RESULTS: Trabecular thickness in Ir was lower than that in NoIr (P = 0.028). No difference was found for bone volume fraction and bone area. Lacunae filled with osteocytes were more numerous (P < 0.0001) in NoIr (2.6 ± 0.6) than in Ir (1.97 ± 0.53). Empty lacunae were more prevalent (P < 0.003) in Ir (0.14 ± 0.10) than in NoIr (0.1 ± 0.1). The mean osteocyte lacunae size was higher (P < 0.01) in Ir (15.4 ± 4.41) than in NoIr (12.7 ± 3.7). Picrosirius red analysis showed more (P < 0.05) mature collagen in NoIr (29.0 ± 5.3) than in Ir (23.4 ± 4.5). Immature collagen quantification revealed no difference between groups. CONCLUSIONS: Ionizing radiation compromised bone formation and an impairment in bone repair in irradiated woven bone was observed. CLINICAL RELEVANCE: Before radiotherapy, patients usually need surgical intervention, which may be better performed, if clinicians understand the repair process in irradiated bone, using novel approaches for treating these individuals.

Ionizing radiation and bone quality: time-dependent effects.

BACKGROUND: The aim of this study was to evaluate the ionizing radiation (IR) effects on rat bone 30 and 60 days after irradiation. METHODS: Wistar rats were submitted to IR (30 Gy) on the left leg and were euthanized after 30 and 60 days. The legs were divided into four groups according to the treatment and euthanization time: C30 and C60 (right leg-without IR), IR30 and IR60 (left leg-with IR). RESULTS: CT analysis showed more radiodensity in C60 compared with other groups, and IR60 showed more radiodensity than IR30. In histomorphometric analysis, C30 showed lower bone matrix values compared with IR30 and C60. Lacunarity analyses showed more homogeneous bone channel distribution in C30 than IR30. ATR-FTIR showed decrease in ratio of mature and immature crosslinks in IR30 compared with C30. Crystallinity Index was decrease in IR60 compared with C60. The Amide III + Collagen/HA ratio was increased in C60 compared with C30; however this ratio decreased in IR60 compared with IR30. Biomechanical analysis showed lower values in IR groups in both time. CONCLUSIONS: IR damaged bone quality and decreased stiffness. Moreover, the results suggested that the deleterious effects of IR increased in the late time points.

Periodontal therapy for patients before and after adiotherapy: A review of the literature and topics of interest for clinicians

BACKGROUND: This article aims to demonstrate the importance of the TMJ (Temporomandibular Joint) decompression in the treatment of degenerative processes and disc displacements, reporting two clinical cases treated with orthopedic and decompressive correction of TMJ. Material and METHODS: The studies reported in this article show patients with muscle and joint pain who were evaluated pre and post-treatment through MRI (Magnetic Resonance Irradiation) to follow-up bone marrow regeneration and TMJ disc placement. Transcutaneous electrical stimulation (TENS), measurement equipment and IO (Intraoral Orthotic) were used to evaluate and treat the patients. A critical review of literature has also been conducted to confront clinical outcomes. RESULTS: Marrow bone regeneration and disc placement were observed in both patients. CONCLUSIONS: The use of measurement equipment associated with TENS to find the correct rest position of the Jaw an the use of IO to decompress the TMJ was an effective way to promote bone marrow regeneration and disc placement, consequently improving function and quality of life