A preclinical Talbot-Lau prototype for x-ray dark-field imaging of human-sized objects.

PURPOSE: Talbot-Lau x-ray interferometry provides information about the scattering and refractive properties of an object - in addition to the object's attenuation features. Until recently, this method was ineligible for imaging human-sized objects as it is challenging to adapt Talbot-Lau interferometers (TLIs) to the relevant x-ray energy ranges. In this work, we present a preclinical Talbot-Lau prototype capable of imaging human-sized objects with proper image quality at clinically acceptable dose levels. METHODS: The TLI is designed to match a setup of clinical relevance as closely as possible. The system provides a scan range of 120 × 30 cm2 by using a scanning beam geometry. Its ultimate load is 100 kg. High aspect ratios and fine grid periods of the gratings ensure a reasonable setup length and clinically relevant image quality. The system is installed in a university hospital and is, therefore, exposed to the external influences of a clinical environment. To demonstrate the system's capabilities, a full-body scan of a euthanized pig was performed. In addition, freshly excised porcine lungs with an extrinsically provoked pneumothorax were mounted into a human thorax phantom and examined with the prototype. RESULTS: Both examination sequences resulted in clinically relevant image quality - even in the case of a skin entrance air kerma of only 0.3 mGy which is in the range of human thoracic imaging. The presented case of a pneumothorax and a reader study showed that the prototype's dark-field images provide added value for pulmonary diagnosis. CONCLUSION: We demonstrated that a dedicated design of a Talbot-Lau interferometer can be applied to medical imaging by constructing a preclinical Talbot-Lau prototype. We experienced that the system is feasible for imaging human-sized objects and the phase-stepping approach is suitable for clinical practice. Hence, we conclude that Talbot-Lau x-ray imaging has potential for clinical use and enhances the diagnostic power of medical x-ray imaging.

Acoustic radiation contrast in MR images for breast cancer diagnostics--initial phantom study.

Acoustic radiation contrast in magnetic resonance images is an approach to visualize the changes in ultrasonic loss and viscoelastic changes of the sample with the resolution of a magnetic resonance imaging (MRI) system. By irradiating ultrasound (US) into a tissue-mimicking sample, a displacement along the US beam path caused by the acoustic radiation force is obtained. This displacement varies with the US intensity, the duration of irradiation, the US attenuation and the viscoelastic properties of the sample. US pulses of 2.5 MHz with a duration of 20 ms and an intensity of <17 W/cm(2) are used. An MRI sequence was programmed to produce images in which the magnitude of the displacement is visualized by gray value changes. In addition, a finite element simulation of the measurements was performed to demonstrate the feasibility of the method. Through examination of the measurements and the simulations, information about viscoelastic changes was achieved. In this work, measurements on different breast phantoms are presented.