A nanocarrier system based on CQDs for efficient mitoxantrone drug delivery.

Cancer is the second most fatal disease among women. In recent years, utilizing strategies based on carbon quantum dots (CQDs) as targeted drug delivery systems has had a significant impact on advancing and improving cancer treatment. This study is focused on the development of a nanocarrier, based on CQDs, for improving the therapeutic efficiency of mitoxantrone (MTX). Hence, the N-doped CQDs were synthesized by a hydrothermal method. Following its purification, MTX was loaded to the CQD, resulting in an increase in the size from 36.78 ± 0.9 nm to 157.8 ± 12.18 nm, with an ideal drug entrapment efficiency of 97 %. Drug release investigation showed a pH-dependent improvement, from 8 % at pH 7.4 to 11 % at pH 5.2 after 48 h. Based on the Methylthiazolyldiphenyl-tetrazolium bromide (MTT) results after 5 h of treatment on MCF-7 breast cancer cells, the N-doped CQD showed no significant effect on the cancer cells, whereas a half maximal Inhibitory Concentration (IC50) was achieved with the N-doped CQD-MTX complex at a concentration between 0.5 to 0.8 µM. Therefore, the newly developed drug delivery complex was capable of providing a rather identical influence on MCF-7 cells, as the free MTX, however, improving the pharmacokinetic of the drug by its controlled and on-target drug release, due to an alteration in distribution and absorption parameters.

Green synthesis of yeast cell wall-derived carbon quantum dots with multiple biological activities.

Hypothesis: Yeast cell walls are a sustainable biomass source containing carbon and other elements like phosphorus. Converting cell walls into valuable nanomaterials like carbon quantum dots (CQDs) is of interest. Experiments: Cell walls from Saccharomyces cerevisiae were hydrothermally treated in 0.5 M H2SO4 to produce CQDs. Multiple analytical techniques were utilized to confirm phosphorus-doping (P-CQDs), characterize the fluorescence properties, determine quantum yield, and evaluate the sensing, antimicrobial, photocatalytic, and antioxidant capacities. Findings: A successful synthesis of P-CQDs was achieved with strong blue fluorescence under UV excitation, 19 % quantum yield, and excellent stability. The P-CQDs showed sensitive fluorescence quenching in response to ferric ions with a 201 nM detection limit. Antibacterial effects against Escherichia coli and Staphylococcus aureus were demonstrated. P-CQDs also exhibited dye degradation under sunlight and antioxidant activity. So, the prepared P-CQDs displayed promising multifunctional capabilities for metal ion detection, disinfection, and environmental remediation. Further research is required to fully realize and implement the multifunctional potential of P-CQDs in real-world applications.

Development of a carbon quantum dot-based sensor for the detection of acetylcholinesterase and the organophosphate pesticide.

In this study, a proper and reliable fluorometric method is introduced for screening acetylcholinesterase (AChE) and its inhibitors, using carbon quantum dots (CQDs) as the signal reporter. Pure, S-doped, and P-doped CQDs, were synthesized and their recoverable fluorescence quenching properties were observed, when exposed to Hg2+, Cu2+, and Fe3+ quenching ions, respectively. The study on the recovery of their emission showed that after the introduction of another guest substance with a stronger affinity to the quenching ions, their fluorescence is restored. The Design Expert software was employed to compare the performance of the three CQDs, as fluorescent probes, based on their quenching efficiency and the percentage of their emission recovery in the presence of AChE and acetylthiocholine (ATCh). Based on the statistical analysis, among the studied CQDs, S-doped CQD was the most suitable candidate for sensor designing. The detection mechanism for the proposed S-doped CQD-based sensor is as follows: The strong binding of Cu2+ ions to carboxyl groups of S-doped CQD quenches the fluorescence signal. Then, hydrolysis of ATCh into thiocholine (TCh) in the presence of AChE causes fluorescence recovery, due to the stronger affinity of Cu2+ to the TCh, rather than the CQD. Finally, in the presence of malathion and chlorpyrifos inhibitors, AChE loses its ability to hydrolyze ATCh to TCh, so the fluorescence emission remains quenched. Based on the proposed detection technique, the designed sensor showed detection limits of 1.70 ppb and 1.50 ppb for malathion and chlorpyrifos, respectively.

A novel technique to overcome fluid flow influence in carbon quantum dots/paper-based analytical devices.

Paper-based analytical devices are promising choices for rapid tests and lab-on-chip detection techniques. Carbon quantum dots (CQDs), on the other hand, are biocompatible nanomaterials, which are industrially promising, due to their fast and cost-effective gram-scale synthesis techniques, as well as their significantly high and stable photoluminescence (PL) properties, which are durable and reliable over a year. However, there have been limitations in the entrapment of CQDs on cellulose papers in a way that their PL is not influenced by the flowing of the CQDs with the stream of analyte fluid, making the sensors less accurate at very low concentrations of liquid analytes. Therefore, in this investigation, a polyvinyl alcohol/alkaline-based method was systematically generated and developed to entrap CQDs inside a 3D crystalline matrix on paper, in a way that they can be used directly as probes for a simple drop-and-detect method. As a proof of concept, N/P-doped CQD on cellulose paper was used to make fluorescent paper-based analytical devices for identifying traces of Hg2+ of around 100 ppb. The designed sensor was tested over several months, to study its durability and functionality over long periods, for potential industrial applications.

A highly-sensitive vascular endothelial growth factor-A(165) immunosensor, as a tool for early detection of cancer.

Biomarkers can be ideal indicators for assessing the risk of the presence of a disease. In this study, a label-free electrochemical biosensor was designed to quantify the vascular endothelial growth factor A (165) (VEGF-A(165)) antigen, using reduced graphene oxide-gold nanoparticle for early detection of breast cancer. The conductivity of gold nanoparticle along with its biocompatibility provide an enhanced surface, suitable for anti-VEGF antibody immobilization. 11-mercaptoundecanoic acid was used to facilitate a single-step and convenient bonding of the antibodies to the surface, compared to previous studies. The dynamic range of the biosensor was between 20 to 120 pg/ml and its limit of detection of the biomarker VEGF-A(165) was obtained to be about 0.007 pg/ml, using different electric signal transduction modes. Hence, the biosensor is a beneficial immunosensor with high sensitivity and ideal dynamic range for early-stage diagnosis of breast cancer and other cancers diseases associated with expression of VEGF-A(165). The as-prepared immunosensor could be efficiently employed for designing a point-of-care diagnostic platform.

Antibody-modified magnetic nanoparticles as specific high-efficient cell-separation agents.

Separation of tumor cells is a promising approach that helps not only in early detection of cancer but also as an efficient tool that holds great importance in prohibiting cancer cell mutation, drug resistance to treatments, and in granting successful adjuvant therapies. As one of the highly efficient processes for the separation of single cells, tumor cells, and specific proteins from fresh whole blood, a magnetic iron oxide nanoparticle (IONP)-based immunomagnetic separation technique has been developed in this article. The synthesized IONPs were modified with antibodies (Abs) against human epithelial growth factor receptor 2 (HER2), which is overexpressed and/or amplified in about 15% of breast cancer patients with several types of human cancer cells. The prepared Ab-conjugated IONPs (Ab-IONPs) attach HER2-positive cancer cells exclusively and can serve as specific high-efficient single-cell separation agents. The results showed that the magnetic IONPs have been successfully attached to the Abs via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide linkers. Maximum targeting efficiency of the Ab-IONP complex, which was 94.5 ± 0.8% for BT474 and 70.6 ± 0.4% for mixture of cells (BT474 and MCF7), was achieved with a minimum amount of Abs, to provide an economically efficient single-cell detection device.

Optimization of the interaction of graphene quantum dots with lipase for biological applications.

Graphene quantum dots (GQDs) are known as emerging sub-10 nm nanoparticles (NPs), which are in fact few-layered pieces of graphene, capable of emitting blue fluorescence, when exposed to 360 nm UV light. Understanding the details of the interaction between GQDs and lipase can serve as a critical step for improving the biological outcome of GQD-derived drug-delivery and diagnosis systems. The interaction occurs in the form of surface adsorption, which can subsequently influence the physicochemical properties of both the NP and the protein. Hence, a systematic approach was taken here to optimize the GQDs' synthesis conditions in order to achieve the highest possible quantum yield (QY). Furthermore, to understands the influence of the interaction of GQDs and lipase, on both the activity of lipase and the emission intensity of GQDs, various incubation conditions were tested to achieve optimized conditions over central composite design algorithm by Design-Expert®, using response surface methodology. The results show that the GQDs fabricated by thermal decomposition of citric acid at 160°C, with a heating duration of 55 min, obtain almost three times higher QY than the highest values reported previously. The best enzymatic activity after the formation of the hard corona, as well as the highest fluorescent emission, were achieved at GQD-to-enzyme ratios within the rage of 23-25%, at temperatures between 41 and 42°C, for 6-8 min. In the aforementioned condition, the enzyme retains 91-95% of its activity and the NP preserves about 80-82% of its fluorescence intensity after incubation.

New Insight into the Concept of Carbonization Degree in Synthesis of Carbon Dots to Achieve Facile Smartphone Based Sensing Platform.

Direct pyrolysis of citric acid (CA) has been proved to be a facile bottom-up technique for making pristine carbon dots (CD) with homogenous size distribution. However, limited reports are available on systematic optimization of carbonization degree. In this investigation, pyrolysis temperatures between 160 °C and 220 °C were studied, based on CA thermal decomposition path, using various heating durations. The effect of the formation of more carbonized carbon particles (MCCPs), as the major byproduct of this method, on photoluminescence properties of CDs was also considered. The NaOH amount that neutralizes the solution and the effect of dilution on the emission intensity, were introduced as simple and accessible factors for monitoring carbonization degree, and an estimate of MCCP/CD ratio, respectively. The results show that the CDs fabricated at 160 °C, 50 minutes attain almost twice higher quantum yield (QY) of 29% than highest QY reported based on pyrolysis of CA. The so-prepared CDs can be employed as excellent candidates for turn-off sensing. As a proof of concept, detection limit of 50 nM for Hg2+ was achieved using a facile and inexpensive smartphone set-up that is able to quantify and compare fluorescent intensity in several samples simultaneously.

On finite element modeling of single- and multi-walled carbon nanotubes.

In this study, Single-Walled and Multi-Walled Carbon Nanotubes in their perfect forms were investigated by the Finite Element Method. Details on the modeling of the structure are provided in this paper, including the appropriate elements, the element properties that should be defined based on the atomic structure of Carbon Nanotubes and the corresponding chemical bonds. Non-covalent van der Waals interactions between two neighbor atoms as well as the required approximations for the modeling of the structures with this kind of interaction are also presented. Specific attention was dedicated to the necessity of using some time- and energy-consuming steps in the simulation process. First, the effect of simulating only a single ring of the whole structure is studied to find out if it would represent the same mechanical behavior as the long structure. Results show that by applying an appropriate set of boundary conditions, the stiffness of the shortened structure is practically equal to the long perfect structure. Furthermore, Multi-Walled Carbon Nanotube structures with and without defining the van der Waals force are studied. Based on the observations, applying the van der Waals force does not significantly influence the obtained Young's modulus of the structure in the case of a uniaxial tensile test.