Application of gums as techno-functional hydrocolloids in meat processing and preservation: A review.

The global consumption of meat products is on the rise, leading to concerns about sustainability, fat content, and shelf life. Synthetic additives and preservatives used to extend the shelf life of meat often have negative health and environmental implications. Natural polysaccharides such as seed gums possess unique techno-functional properties, including water holding capacity, emulsifying, and film forming, offering potential alternatives in meat processing and preservation. This study explores the use of gums in meat and meat product processing and preservation. The water holding and emulsifying properties of gums can potentially bind fat and reduce overall lipid content, while their antimicrobial and film-forming properties can inhibit the microbial growth and reduce oxidation, thereby extending the shelf life. Incorporating gums as a fat replacer and edible coating shows promise for reducing fat content and extending the shelf life of meat and meat products.

A review on mechanisms and impacts of cold plasma treatment as a non-thermal technology on food pigments.

Food characteristics like appearance and color, which are delicate parameters during food processing, are important determinants of product acceptance because of the growing trend toward more diverse and healthier diets worldwide, as well as the increase in population and its effects on food consumption. Cold plasma (CP), as a novel technology, has marked a new trend in agriculture and food processing due to the various advantages of meeting both the physicochemical and nutritional characteristics of food products with minimal changes in physical, chemical, nutritional, and sensorial properties. CP processing has a positive impact on food quality, including the preservation of natural food pigments. This article describes the influence of CP on natural food pigments and color changes in vegetables and fruits. Attributes of natural pigments, such as carotenoids, chlorophyll, anthocyanin, betalain, and myoglobin, are presented. In addition, the characteristics and mechanisms of CP processes were studied, and the effect of CP on mentioned pigments was investigated in recent literature, showing that the use of CP technology led to better preservation of pigments, improving their preservation and extraction yield. While certain modest and undesirable changes in color are documented, overall, the exposure of most food items to CP resulted in minor loss and even beneficial influence on color. More study is needed since not all elements of CP treatment are currently understood. The negative and positive effects of CP on natural food pigments in various products are discussed in this review.

Study of the Apoptotic Impacts of Hazelnut Oil on the Colorectal Cancer Cell Line.

Background: Hazelnut oil has a unique structure with a high oleic acid content, tocopherol, tocotrienols, and other bioactive compounds, such as phytosterols. These biochemical compounds have been widely studied because of their potential health properties. Understanding the process of apoptosis is the basis of new therapies contributing to cancer cells' death. Recently, the potential role of the evolutionary-reserved bcl-2 protein family in tumor progression and prognosis of some malignancies has been addressed in several studies. The present study is aimed at evaluating the effect of apoptotic properties of hazelnut oil on colorectal cancer cells through the major members of this family (bax and bcl-2). Materials and Methods: MTT assay, apoptotic cell staining (using Annexin V and propidium iodide), flow cytometry, and real-time PCR were used to evaluate the toxicity, percentage of apoptotic cells, and bax and bcl-2 genes' expression after exposing HT29 cells to hazelnut oil. Results: After hazelnut treatment, significant decreases in cell viability, and the gene expression of bax and bcl-2 were observed compared to the control group (P < 0.05). In addition, the total percentage of apoptotic cells after hazelnut oil treatment showed a significant increase in comparison with the negative control group (P < 0.05). Conclusion: Hazelnut oil appears to cause the death of cancerous cells through an apoptotic mechanism.

Physicochemical and control releasing properties of date pit (Phoenix dactylifera L.) phenolic compounds microencapsulated through fluidized-bed method.

This study aimed to investigate the effect of different ethanol/water solvents on phenolic compound extraction and microencapsulated extract of date pit powder. The highest and the lowest amounts of total phenolic compounds were 742.37 and 236.07 mg GAE/g dm, respectively, observed in water-ethanol composite solvent (25% W: 75% E) and water solvent (100% W). In this regard, the highest and lowest values of IC50 were 6.83 and 0.90 µg/ml, measured in water solvent (100% W) and water-ethanol solvent (25% W: 75% E), respectively. In the second phase, using maltodextrin (10%, 20%, and 30% W/V) as the first layer, date pit extract was microencapsulated. Alhagi maurorum gum (10%, 20%, and 30% W/V) as the second layer and medium-chain triglycerides (MCT oil) (15% W/W) as the third layer were used by a fluidized-bed drying technique. By increasing temperature, the microencapsulated extract powder solubility was increased as well. In contrast, the moisture content, bulk density, tapped density, and compressibility index decreased. By increasing temperature, the maltodextrin and A. maurorum gum concentration, the coating efficiency, and the loading capacity of the samples increased initially and decreased eventually. Moisture content, powder solubility, bulk density, and compressibility index increased, with increasing maltodextrin concentration, however, tapped density decreased. The optimal physicochemical properties of the phenolic compounds' microcapsules were determined at 45°C and at a concentration of 20% of each of the maltodextrin and A. maurorum gum. According to scanning electron images, the powder particles were spherical and had a relatively smooth surface. Notably, the release rate of phenolic compounds reached its maximum (64%) after 24 h.

Effect of cold atmospheric plasma torch distance on the microbial inactivation and sensorial properties of ready-to-eat olivier salad.

This study aimed to investigate the effect of the cold atmospheric plasma torch (CAPT) nozzle distance from the surface of Olivier salad and the treatment time in the reduction of microbial load and sensory properties of the product simultaneously. In this study, the CAPT nozzle was placed at 3, 5, and 7 cm distances from the surface of the Olivier salad, and its efficiency in inactivating the microbial population, decimal reduction time (D-value), and sensory evaluation of the product were evaluated. The results showed that reducing the distance and increasing the plasma treatment time (30, 60, 90, and 120 s) both reduced the microbial load of the product. The maximum inactivation and the minimum D-value are related to the 3 cm distance for 120 s, which has been 3.77, 2.91, and 1.52 log CFU/g for Coliform, Total viable count (TVC), mold and yeast, respectively. The lowest D-value was related to Coliform (4.41 s). CAPT treatment had no significant sensible effect on the product's sensory characteristics compared to the control sample. The treated sample at a 3 cm distance for 90 s and the microbial reduction to an acceptable amount and high acceptancy from sensory evaluators were selected as the superior treatment in this study. Also, the results showed that CAPT could be used successfully in ready-to-eat (RTE) products.

Effect of low-pressure cold plasma processing on decontamination and quality attributes of Saffron (Crocus sativus L.).

This study investigated the microbial decontamination of saffron using the low-pressure cold plasma (LPCP) technology. Therefore, other quality characteristics of saffron that create the color, taste, and aroma have also been studied. The highest microbial log reduction was observed at 110 W for 30 min. Total viable count (TVC), coliforms, molds, and yeasts log reduction were equal to 3.52, 4.62, 2.38, and 4.12 log CFU (colony-forming units)/g, respectively. The lowest decimal reduction times (D-values) were observed at 110 W, which were 9.01, 3.29, 4.17, and 8.93 min for TVC, coliforms, molds, and yeasts. LPCP treatment caused a significant increase in the product's color parameters (L*, a*, b*, ΔE, chroma, and hue angle). The results indicated that the LPCP darkened the treated stigma's color. Also, it reduced picrocrocin, safranal, and crocin in treated samples compared to the untreated control sample (p < .05). However, after examining these metabolites and comparing them with saffron-related ISO standards, all treated and control samples were good.

Ovarian toxicity of plant-derived edible oils: a 28 days hormonal and histopathological study in Wistar rat.

Initial evidence on the endocrine-disrupting effects of genetically modified (GM) food motivated us to evaluate the reproductive toxicity of GM and non-GM plant-derived edible oils in female Wistar rats. Sunflower (non-GM), maize (GM), and canola (GM) oils as popular resource dietary oils were purchased from the local market. After tracking the target sequence of CaMV 35S and Nos terminator in all selected batch numbers of edible oils by real-time PCR, oil samples were daily gavaged to 10 weeks Wistar rats for 28 days. Clinical factors, serum lipid levels, sex hormones, and gonadotropins as well as the histopathological changes were compared among groups by statistical analysis. Besides normal lipid profile, gonadotropin levels, and LH/FSH ratio at day 28, serum estradiol levels were raised in both GM (canola oil (p=0.04)) and non-GM (sunflower oil (p=0.008)) groups. In necropsy studies, ovarian atrophies were detected in canola (p<0.001) and sunflower groups (p<0.043) although uterine remained unchanged in all groups. In histopathological evaluations, all sections showed severe congestion and multiple follicular cysts in the sunflower oil group. Simple and secondary cysts in the maize group were the other type of ovarian toxicity in this short period of time. Remarkable estrogenic properties of GM and non-GM plant-derived edible oils with signs of ovarian atrophy, congestion, and cysts may contribute to phthalate or other xenoestrogenic contaminations; therefore, analytical studies of samples and further human populations studies are highly recommended.

CFD simulation and experimental validation of in-container thermal processing in Fesenjan stew.

The purpose of the study was to develop and validate the CFD model for predicting temperature profile and determine the slowest heating zone (SHZ) during the thermal processing of Fesenjan stew. The temperature profile was recorded experimentally at a point where it was predicted to be the SHZ. The results showed that the SHZ was located at the geometric center of the containers, and the temperature reached 120.3 °C. The average temperatures of experiment versus predicted temperatures at the same positions, no significant difference were observed (p < .01). The RMSE calculation showed good agreement between simulation and experimental data (RMSE = 1.36). The container geometrical center F0 was measured 17.68 min and indicated that an additional process was applied. An 11.5 min reduction in holding time was estimated to optimize the process since the F0 of some meat and sauce-based food is about 6-7.65 min.