Putting Forward NUS-8-CO2H/PIM-1 as a Mixed Matrix Membrane for CO2 Capture.

Mixed matrix membranes (MMMs) composed of NUS-8 metal-organic framework (MOF) nanosheets dispersed into a polymer of intrinsic microporosity 1 (PIM-1) polymer matrix are known to be promising candidates for CO2/N2 separation because of a solubility-driven separation mechanism. In this work, we predict that a chemical functionalization of the organic linker of NUS-8 by a CO2-philic function confers an even better separation performance to the resulting MMM. Our simulations revealed that the NUS-8-CO2H/PIM-1 composite exhibits a 3-fold increase in CO2/N2 selectivity versus the NUS-8/PIM-1 analogue while achieving a high CO2 permeability (6700 barrer). We demonstrated that this improved level of performance is due to an increase both in the total MOF/polymer interfacial pore volume and in the CO2-affinity due to the chemical functionalization. These results suggest that an appropriate choice of chemical functionalization of a MOF is a promising strategy to improve gas separation performances for MMM composites that exhibit a solubility-driven separation mechanism.

Multifaceted Study of the Interactions between CPO-27-Ni and Polyurethane and Their Impact on Nitric Oxide Release Performance.

A multifaceted study involving focused ion beam scanning electron microscopy techniques, mechanical analysis, water adsorption measurements, and molecular simulations is employed to rationalize the nitric oxide release performance of polyurethane films containing 5, 10, 20, and 40 wt % of the metal-organic framework (MOF) CPO-27-Ni. The polymer and the MOF are first demonstrated to exhibit excellent compatibility. This is reflected in the even distribution and encapsulation of large wt % MOF loadings throughout the full thickness of the films and by the rather minimal influence of the MOF on the mechanical properties of the polymer at low wt %. The NO release efficiency of the MOF is attenuated by the polymer and found to depend on wt % of MOF loading. The formation of a fully connected network of MOF agglomerates within the films at higher wt % is proposed to contribute to a more complex guest transport in these formulations, resulting in a reduction of NO release efficiency and film ductility. An optimum MOF loading of 10 wt % is identified for maximizing NO release without adversely impacting the polymer properties. Bactericidal efficacy of released NO from the films is demonstrated against Pseudomonas aeruginosa, with a >8 log10 reduction in cell density observed after a contact period of 24 h.

Toward an Understanding of the Microstructure and Interfacial Properties of PIMs/ZIF-8 Mixed Matrix Membranes.

A study integrating advanced experimental and modeling tools was undertaken to characterize the microstructural and interfacial properties of mixed matrix membranes (MMMs) composed of the zeolitic imidazolate framework ZIF-8 nanoparticles (NPs) and two polymers of intrinsic microporosity (PIM-1 and PIM-EA-TB). Analysis probed both the initial ZIF-8/PIM-1 colloidal suspensions and the final hybrid membranes. By combination of dynamic light scattering (DLS) and transmission electron microscopy (TEM) analytical and imaging techniques with small-angle X-ray scattering (SAXS), the colloidal suspensions were shown to consist mainly of two distinct kinds of particles, namely, polymer aggregates of about 200 nm in diameter and densely packed ZIF-8-NP aggregates of a few 100 nm in diameter with a 3 nm thick polymer top-layer. Such aggregates are likely to impart the granular texture of ZIF-8/PIMs MMMs as shown by SEM-XEDS analysis. At the molecular scale, modeling studies showed that the surface coverage of ZIF-8 NPs by both polymers appears not to be optimal with the presence of microvoids at the interfaces that indicates only a moderate compatibility between the polymer and ZIF-8. This study shows that the microstructure of MMMs results from a complex interplay between the ZIF-8/PIM compatibility, solvent, surface chemistry of the ZIF-8 NPs, and the physicochemical properties of the polymers such as molecular structure and rigidity.

Microscopic Model of the Metal-Organic Framework/Polymer Interface: A First Step toward Understanding the Compatibility in Mixed Matrix Membranes.

An innovative computational methodology integrating density functional theory calculations and force field-based molecular dynamics simulations was developed to provide a first microscopic model of the interactions at the metal-organic framework (MOF) surface/polymer interface. This was applied to the case of the composite formed by the polymer of intrinsic microporosity, PIM-1, and the zeolitic imidazolate framework, ZIF-8, as a model system. We found that the structure of the composite at the interface is the result of both the chemical affinity between PIM-1 and ZIF-8 and the rigidity of the polymer. Specifically, there is a preferential interaction between the -CN groups of PIM-1 and the NH terminal functions of the organic linker at the ZIF-8 surface. Additionally, the resulting conformation of the polymer gives rise to interfacial microvoids at the vicinity of the MOF surface. The porosity, rigidity, and density of the interfacial polymer were analyzed and compared to those for the bulk polymer. It was shown that the polymer still feels the impact of the MOF surface even at long distances above 15-20 Å. Further, both the polydispersity of the polymer and the flexibility of the MOF surface were revealed to only slightly affect the properties of the MOF/interface. This work, which delivers a microscopic picture of the MOF surface/polymer interactions at the interface, would lead, in turn, to the understanding of the compatibility in MOF-based mixed-matrix membranes.

Flexible porous metal-organic frameworks for a controlled drug delivery.

Flexible nanoporous chromium or iron terephtalates (BDC) MIL-53(Cr, Fe) or M(OH)[BDC] have been used as matrices for the adsorption and in vitro drug delivery of Ibuprofen (or alpha- p-isobutylphenylpropionic acid). Both MIL-53(Cr) and MIL-53(Fe) solids adsorb around 20 wt % of Ibuprofen (Ibuprofen/dehydrated MIL-53 molar ratio = 0.22(1)), indicating that the amount of inserted drug does not depend on the metal (Cr, Fe) constitutive of the hybrid framework. Structural and spectroscopic characterizations are provided for the solid filled with Ibuprofen. In each case, the very slow and complete delivery of Ibuprofen was achieved under physiological conditions after 3 weeks with a predictable zero-order kinetics, which highlights the unique properties of flexible hybrid solids for adapting their pore opening to optimize the drug-matrix interactions.

On the breathing effect of a metal-organic framework upon CO(2) adsorption: Monte Carlo compared to microcalorimetry experiments.

Grand Canonical Monte Carlo simulations have explained the breathing of a metal-organic framework upon CO(2) adsorption, first suggested by microcalorimetry.

Spectroscopically distinct sites present in methyltrioxorhenium grafted onto silica-alumina, and their abilities to initiate olefin metathesis.

Deposition of CH3ReO3 onto the surface of dehydrated, amorphous silica-alumina generates a highly active, supported catalyst for the metathesis of olefins. However, silica-alumina with a high (10 wt %) Re loading is no more active than silica-alumina with low (1 wt %) loading, while CH3ReO3 on silica is completely inactive. Catalysts prepared by grafting CH3ReO3 on silica-alumina contain two types of spectroscopically distinct sites. The more strongly bound sites are responsible for olefin metathesis activity and are formed preferentially at low Re loadings (< or =1 wt %). They are created by two Lewis acid/base interactions: (1) the coordination of an oxo ligand to an Al center of the support and (2) interaction of one of the adjacent bridging oxygens (AlOSi) with the Re center. At higher Re loadings (1-10 wt %), CH3ReO3 also interacts with surface silanols by H-bonding. This gives rise to highly mobile sites, most of which can be observed by 13C solid-state NMR even without magic-angle spinning. Their formation can be prevented by capping the surface hydroxyl groups with hexamethyldisilazane prior to grafting CH3ReO3, resulting in a metathesis catalyst that is more selective, more robust, and more efficient in terms of Re use.

Incidence and properties of nanoscale defects in silicalite.

Crystal intergrowths are predicted to form more readily than other extended defects in a model zeolite membrane and cause a reduction in molecular flux.

Cation mobility and the sorption of chloroform in zeolite NaY: molecular dynamics study.

Molecular dynamics simulations at temperatures of 270, 330, and 390 K have been carried out to address the question of cation migration upon chloroform sorption in sodium zeolite Y. The results show that sodium cations located in different sites exhibit different types of mobility. These may be summarized as follows: (1) SII cations migrate toward the center of the supercage upon sorption, due to interactions with the polar sorbate molecules. (2) SI' cations hop from the sodalite cage into the supercage to fill vacant SII sites. (3) SI' cations migrate to other SI' sites within the same sodalite cage. (4) SI cations hop out of the double six-rings into SI' sites. In some instances, concerted motion of cations is observed. Furthermore, former SI' and SI cations, having crossed to SII sites, may then further migrate within the supercage, as in (1). The cation motion is dependent on the level of sorbate loading, with 10 molecules per unit cell not being enough to induce significant cation displacements, whereas the sorption of 40 molecules per unit cell results in a number of cations being displaced from their original positions. Further rearrangement of the cation positions is observed upon evacuation of the simulation cell, with some cations reverting back to sites normally occupied in bare NaY.