Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Sci Adv ; 10(3): eadf8666, 2024 Jan 19.
Artigo em Inglês | MEDLINE | ID: mdl-38241376

RESUMO

Fiber-optic distributed acoustic sensing (DAS) has proven to be a revolutionary technology for the detection of seismic and acoustic waves with ultralarge scale and ultrahigh sensitivity, and is widely used in oil/gas industry and intrusion monitoring. Nowadays, the single-frequency laser source in DAS becomes one of the bottlenecks limiting its advance. Here, we report a dual-comb-based coherently parallel DAS concept, enabling linear superposition of sensing signals scaling with the comb-line number to result in unprecedented sensitivity enhancement, straightforward fading suppression, and high-power Brillouin-free transmission that can extend the detection distance considerably. Leveraging 10-line comb pairs, a world-class detection limit of 560 fε/√Hz@1 kHz with 5 m spatial resolution is achieved. Such a combination of dual-comb metrology and DAS technology may open an era of extremely sensitive DAS at the fε/√Hz level, leading to the creation of next-generation distributed geophones and sonars.

2.
Opt Express ; 15(22): 14936-41, 2007 Oct 29.
Artigo em Inglês | MEDLINE | ID: mdl-19550772

RESUMO

A hybrid fiber-optic sensor consisting of a long-period fiber grating (LPFG) and a micro extrinsic Fabry-Perot (F-P) interferometric (MEFPI) sensor is proposed and demonstrated for simultaneous measurement of high-temperature and strain. The LPFG written by using high-frequency CO(3+) laser pulses is used for high-temperature measurement while the MEFPI sensor fabricated by using 157nm F(2) laser pulses is used for strain measurement under high temperature. The distinguishing feature of such a hybrid fiber-optic sensor is that it can stand for high temperature of up to 650 masculineC and achieve precise measurement of strain under high temperature conditions simultaneously.

3.
Opt Express ; 15(26): 17645-51, 2007 Dec 24.
Artigo em Inglês | MEDLINE | ID: mdl-19551060

RESUMO

We demonstrate experimentally the light coupling effects between two parallel CO(2)-laser written long-period fiber gratings. For gratings written in standard single-mode fibers, the coupling efficiency depends strongly on the fiber orientation with the strongest coupling obtained when the exposed sides of the fibers face each other, while for gratings written in boron-doped fibers, the coupling efficiency is independent of the fiber orientation. We achieve a peak coupling efficiency of approximately 86% with gratings written in boron-doped fibers by using a suitable surrounding refractive index and offset distance between the two gratings. Our results suggest the possibility of realizing efficient broadband all-fiber couplers with CO(2)-laser written long-period fiber gratings.


Assuntos
Lasers de Gás , Fibras Ópticas , Refratometria/instrumentação , Telecomunicações/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Reprodutibilidade dos Testes , Sensibilidade e Especificidade
4.
Opt Lett ; 31(18): 2684-6, 2006 Sep 15.
Artigo em Inglês | MEDLINE | ID: mdl-16936857

RESUMO

A novel tunable fiber ring laser configuration with a combination of bidirectional Raman amplification and dual erbium-doped fiber (EDF) amplification is proposed for realizing high optical signal-to-noise ratio (SNR), long-distance, quasi-distributed fiber Bragg grating (FBG) sensing systems with large capacities and low cost. The hybrid Raman-EDF amplification configuration arranged in the ring laser can enhance the optical SNR of FBG sensor signals significantly owing to the good combination of the high gain of the erbium-doped fiber amplifier (EDFA) and the low noise of the Raman amplification. Such a sensing system can support a large number of FBG sensors because of the use of a tunable fiber Fabry-Perot filter located within the ring laser and spatial division multiplexing for expansion of sensor channels. Experimental results show that an excellent optical SNR of approximately 60 dB has been achieved for a 50 km transmission distance with a low Raman pump power of approximately 170 mW at a wavelength of 1455 nm and a low EDFA pump power of approximately 40 mW at a wavelength of 980 nm, which is the highest optical SNR achieved so far for a 50 km long FBG sensor system, to our knowledge.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...