Morphostructural studies of pure and mixed metal oxide nanoparticles of Cu with Ni and Zn.

Nano-scale interactions between pure metal or metal-oxide components within an oxide matrix can improve functional performance over basic metal oxides. This study reports on the synthesis of monometallic (CuO), bimetallic (CuO-NiO) and trimetallic (CuO-NiO-ZnO) oxide nanoparticles (NPs) via the co-precipitation method and investigation of morphostructural properties. All of the synthesized metal oxide NPs were calcined at 550 °C temperature and annealed under vacuum. In this work, we applied Scherrer formula, modified Scherrer equation, Williamson-Hall plots, and Halder-Wagner plots to calculate the average crystallite size. The XRD data analysis showed that average crystallite sizes of the as-synthesized metal oxide phases were between 4 nm and 76 nm and average diameters calculated from SEM image were between 15 nm and 83 nm. The XRD studies also disclosed that average crystallite size and lattice microstrain of the CuO phases remain almost same (43 nm-46 nm and 2.074×10-3 to 2.665×10-3) for pure CuO and mixed CuO-NiO; but in case of mixed CuO-NiO-ZnO it is found to decrease in size to 11 nm where lattice microstrain increases to 9.653×10-3. Line broadening of diffraction peaks from microstrain contribution was between 0.02 and 0.01. Degree of crystallinity (%) of CuO phases found to decrease from 81 to 71. Dislocation density of CuO phases found to increase from 6.63×10-4nm-2 to 12.68×10-3nm-2. X-ray density of CuO phases increased from 6.48 to 6.53 g/cm3. Where this calculated small dislocation density well agreed with the high crystallinity. Crystal structure and specific surface area were determined from lattice constants and X-ray density. These synthesized nanopowders showed the existence of monoclinic, cubic, and hexagonal phases. The obtained NPs of multi-metal oxide explained more than one phases with different size, shape, and morphology at nano scale.

Bioactive properties and organosulfur compounds profiling of newly developed garlic varieties of Bangladesh.

Studies are being carried out on achieving the maximum quality of garlic through various approaches. In Bangladesh, new garlic varieties (BARI 1-4, BAU-1, BAU-2, BAU-5) have been recently developed by artificial selection to enhance their quality. The present study aimed to evaluate their potency in terms of bioactive properties and organosulfur compounds content using different bioassay and GC-MS techniques while comparing them with other accessible varieties (Chinese, Indian, Local). The new variety, BARI-3 showed the highest antioxidant activity and total phenolic content. It was also found with the highest level of a potent blood pressure-lowering agent, 2-vinyl-4H-1,3-dithiine (78.15 %), which is never reported in any garlic at this percentage. However, the local variety exhibited greater inhibitory properties against the tested organisms including multidrug-resistant pathogens compared to other varieties. This study primarily shows the potential of these two kinds of garlic for their further utilization and development.

Analysis of bioactive compounds present in different crude extracts of Benincasa hispida and Cucurbita moschata seeds by gas chromatography-mass spectrometry.

Plant seeds are the resources of many different bioactive components. The chemical composition of the different crude extracts from Benincasa hispida (White pumpkin) and Cucurbita moschata (Pumpkin) seeds with three different polarity-based solvents (n-hexane, n-hexane-chloroform (2:1), and methanol) was analyzed to identify the biologically active compounds. Each of the extracts was analyzed by gas chromatography-mass spectrometry. Different extracts of targeted seeds showed different biologically active compounds that have different pharmacological potentialities. 9, 12-Octadecadienoic acid (ZZ) was the most potent bioactive compound present in three different extracts of both B. hispida and C. moschata. Another bioactive compound comparatively low percentage present in both plants was n-hexadecanoic acid. Other major pharmacologically active compounds present in both plants were 9- Octadecenoic acid (Z)-, methyl ester, and 9, 12-Octadecadienoic acid methyl ester (E, E). Besides these compounds, a few more biologically active compounds were present in the two plants separately. The findings of this study support the use of these seeds in modern functional foods, nutraceuticals, and medicinal purposes, and the whole seeds would give better health benefits rather than use any extract. Although further pharmacological examinations should be carried out to conclude the medicinal application of the seeds of these two plants as well as to understand the mechanism of the potential health benefits.

Facile acid fermentation extraction of silkworm pupae oil and evaluation of its physical and chemical properties for utilization as edible oil.

Considering the increasing demand for edible oil in recent times, their price in the world market is becoming skyrocketing. In this research, we produced cost-effective edible oil from desilked silkworm pupae (Bombyx mori) applying a facile acid fermentation process, for the first time. The extraction was performed using two different types of organic acids, 3% of each acetic and citric acid. The yield of the extracted oil was 3.52 ± 0.23% from fresh silkworm pupae. The produced oil was then characterized physically and chemically to know its suitability to be used as edible oil. The oil was found with a low peroxide and acid value of 4.82 meq/kg and 1.35 mg KOH/g oil, respectively, and comprised of different fatty acids, in which palmitic acid (32.04%) and oleic acid (34.62%) were in large portions among the total fatty acids. Additionally, the extracted oil included linoleic, α-linolenic, and dihomo-gamma-linolenic acid which have health benefits. The oil was rich with minerals such as Iron, Sodium, Potassium, Calcium, Magnesium, Zinc, and Phosphorus with a negligible concentration of toxic elements such as Manganese, Cobalt, Nickel, Copper, Lead, Cadmium, Chromium, Arsenic, and Silver, indicating a good nutritive value of the extracted oil. Overall, the outcomes of all the characterizations showed that the extracted oil could be used as good edible oil and the corresponding acid fermentation extraction process has the potential to be used as an effective oil extraction method for silkworm pupae.