Anammox with alternative electron acceptors: perspectives for nitrogen removal from wastewaters.

In the context of the anaerobic ammonium oxidation process (anammox), great scientific advances have been made over the past two decades, making anammox a consolidated technology widely used worldwide for nitrogen removal from wastewaters. This review provides a detailed and comprehensive description of the anammox process, the microorganisms involved and their metabolism. In addition, recent research on the application of the anammox process with alternative electron acceptors is described, highlighting the biochemical reactions involved, its advantages and potential applications for specific wastewaters. An updated description is also given of studies reporting the ability of microorganisms to couple the anammox process to extracellular electron transfer to insoluble electron acceptors; particularly iron, carbon-based materials and electrodes in bioelectrochemical systems (BES). The latter, also referred to as anodic anammox, is a promising strategy to combine the ammonium removal from wastewater with bioelectricity production, which is discussed here in terms of its efficiency, economic feasibility, and energetic aspects. Therefore, the information provided in this review is relevant for future applications.

Biocatalyst developed with recovered iron-rich minerals enhances the biotransformation of SARS-CoV-2 antiviral drugs in anaerobic bioreactors.

The biotransformation of the SARS-CoV-2 antiviral drugs, ribavirin and tenofovir, was studied in methanogenic bioreactors. The role of iron-rich minerals, recovered from a metallurgic effluent, on the biotransformation process was also assessed. Enrichment of anaerobic sludge with recovered minerals promoted superior removal efficiency for both antivirals (97.4 % and 94.7 % for ribavirin and tenofovir, respectively) as compared to the control bioreactor lacking minerals, which achieved 58.5 % and 37.9 % removal for the same drugs, respectively. Further analysis conducted by liquid chromatography coupled to mass spectroscopy revealed several metabolites derived from the biotransformation of both antivirals. Interestingly, tracer analysis with 13CH4 revealed that anaerobic methane oxidation coupled to Fe(III) reduction occurred in the enriched bioreactor, which was reflected in a lower content of methane in the biogas produced from this system, as compared to the control bioreactor. This treatment proposal is suitable within the circular economy concept, in which recovered metals from an industrial wastewater are applied in bioreactors to create a biocatalyst for promoting the biotransformation of emerging pollutants. This strategy may be appropriate for the anaerobic treatment of wastewaters originated from hospitals, as well as from the pharmaceutical and chemical sectors.

Enhanced anaerobic treatment of synthetic protein-rich wastewater promoted by organic xerogels.

Carbon-based materials have been shown to enhance anaerobic digestion processes by promoting direct interspecies electron transfer in methanogenic consortia. However, little is known on their effects during the treatment of complex substrates, such as those derived from protein-rich wastewaters. Here, organic xerogels (OX) are tested, for the first time, as accelerators of the methanogenic activity of an anaerobic consortium treating a synthetic protein-rich wastewater. Three OX with distinct pore size distribution (10 and 1000 nm for OX-10 and OX-1000, respectively) and structural conformation (graphene oxide integration into OX-10-GO polymeric matrix) were synthesized. OX-1000 promoted the highest methane production rate (5.21 mL/g*h, 13.5% increase with respect to the control incubated without OX) among the synthesized OX. Additionally, batch bioreactors amended with OX achieved higher chemical oxygen demand (COD) removal (up to 88%) as compared to the control, which only showed 50% of COD removal. Interestingly, amendment of bioreactors with OX also triggered the production of medium-chain fatty acids, including caprylate and caproate. Moreover, OX decreased the accumulation of ammonium, derived from proteins hydrolysis, partly explained by their adsorption capacities, and probably involving their electron-accepting capacity promoting anaerobic ammonium oxidation. This is the first time that OX were successfully applied as methanogenic accelerators for the anaerobic treatment of synthetic protein-rich wastewater, increasing the methane production rate and COD removal as well as triggering the production of medium chain fatty acids and attenuating the accumulation of ammonium. Therefore, OX are proposed as suitable materials to boost the efficiency of anaerobic systems to treat complex industrial wastewaters.

New bimetallic adsorbent material based on cerium-iron nanoparticles highly selective and affine for arsenic(V).

Bimetallic oxy(hydroxides) have gain great interest in water treatment systems based on adsorption processes. Their high OH groups density, in addition to inheriting the oxides properties make them highly promising adsorbents of anions. In this work, highly affine and selective bimetallic oxyhydroxides of cerium and iron (Ce:Fe-P's) for arsenic(V) were synthesized by implementing an assisted microwave methodology. The Ce:Fe-P's were characterized by various techniques (SEM, FTIR, XRD and XPS) and the As(V) adsorption capacity and kinetics as well as the effect of pH and the presence of coexisting anions were determined. The results showed that Ce:Fe-P's have an outstanding As(V) adsorption capacity (179.8 mg g-1 at Ce = 3 mg L-1) even at low concentrations (120 mg g-1 at Ce = 37 µg L-1). Moreover, the adsorption equilibrium was reached very fast, just in 3 min, with an adsorption rate of 0.123 mg min-1, that is, 80% of the initial As(V) concentration of 5 mg L-1 was removed in the first 3 min. The arsenic adsorption capacity decreased only up to 20% at pH above 7, attributed to electrostatic repulsions due to the adsorbent's pHPZC, which was 6.8. On the other hand, the arsenic adsorption capacity of Ce:Fe-P's decreased just 21% in the presence of 10 mg L-1 of each of the following competing anions: F-, Cl-, SO42-, NO3-, PO43- and CO32-, which usually coincide in contaminated water with As(V). Ce:Fe-P's has proven to be one of the most promising As(V) adsorbent materials reported so far in the literature, because it presented an outstanding adsorption capacity and at the same time a very fast adsorption speed. Furthermore, the pH and the concentration of coexisting anions caused little interference in the adsorption processes. Due to the above, the Ce:Fe-P's is already in the process of intellectual protection.

Synthesis of Bamboo-like Multiwall Carbon Nanotube-Poly(Acrylic Acid-co-Itaconic Acid)/NaOH Composite Hydrogel and its Potential Application for Electrochemical Detection of Cadmium(II).

A poly(acrylic acid-co-itaconic acid) (PAA-co-IA)/NaOH hydrogel containing bamboo-type multiwall carbon nanotubes (B-MWCNTs) doped with nitrogen (PAA-co-IA/NaOH/B-MWCNTs) was synthesized and characterized by SEM, absorption of water, point of zero charges, infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The possible use of the PAA-co-IA/NaOH/B-MWCNT hydrogel as an electrode modifier and pre-concentrator agent for Cd(II) sensing purposes was then evaluated using carbon paste electrodes via differential pulse voltammetry. The presence of the B-MWCNTs in the hydrogel matrix decreased its degree of swelling, stabilized the structure of the swollen gel, and favored the detection of 3 ppb Cd(II), which is comparable to the World Health Organization's allowable maximum value in drinking water. A calibration curve was obtained in the concentration range of 2.67 × 10-8 to 6.23 × 10-7 M (i.e., 3 and 70 ppb) to determine a limit of detection (LOD) of 19.24 µgL-1 and a sensitivity of 0.15 µC ppb-1. Also, the Zn(II), Hg(II), Pb(II) and Cu(II) ions interfered moderately on the determination of Cd(II).

Effects of graphene oxide and reduced graphene oxide on acetoclastic, hydrogenotrophic and methylotrophic methanogenesis.

This study describes the effects of graphene oxide (GO) and reduced graphene oxide (rGO) on the acetoclastic, hydrogenotrophic and methylotrophic pathways of methanogenesis by an anaerobic consortium. The results showed that GO negatively affected the hydrogenotrophic and acetoclastic pathways at a concentration of 300 mg/L, causing a decrease of ~ 38% on the maximum specific methanogenic activity (MMA) with respect to the controls lacking GO. However, the presence of rGO (300 mg/L) promoted an improvement of the MMA (> 45%) achieved with all substrates, except for the hydrogenotrophic pathway, which was relatively insensitive to rGO. The presence of either rGO or GO enhanced the methylotrophic pathway and resulted in an increase of the MMA of up to 55%. X-ray photoelectron spectroscopy (XPS) analysis revealed that GO underwent microbial reduction during the incubation period. Electrons derived from substrates oxidation were deviated from methanogenesis towards the reduction of GO, which may explain the MMA decreased observed in the presence of GO. Furthermore, XPS evidence indicated that the extent of GO reduction depended on the metabolic pathway triggered by a given substrate.

Influence of surface chemistry of activated carbon electrodes on electro-assisted adsorption of arsenate.

In this work, the influence of oxygen-containing surface groups of activated carbon electrodes on the charge efficiency of electro-assisted adsorption of As(V) was investigated. It was distinguished between activated carbons modified through acidic (oxidation) and thermal (reduction) treatments, starting with a granular pristine commercial activated carbon of bituminous origin. The textural characterization of the three materials showed that the treatments did not produce significant changes in the surface area and in the distribution of pores. The three carbon samples were used to fabricate packed electrodes with stainless-steel mesh as electric current collector. This work report that the application of anodic potentials (1.01 and 1.41 V vs. NHE) increased the adsorption capacity and rate of arsenate uptake in solutions containing only this contaminant (2.5 mg L-1) at pH 7. The oxidized carbon electrode presented the lowest capacitance and adsorption capacity during electroadsorption (0.33 mg g-1), compared to pristine material (1.77 mg g-1). On the other hand, the reduced electrode displayed the highest adsorption capacity of arsenate (3.14 mg g-1) when applying a potential of 1.01 V. The results were correlated with the potential of zero charge values. In addition, for this material, the rate of kinetics increased 26.7 % compared to experiments without applied potential.

Graphene oxide triggers mass transfer limitations on the methanogenic activity of an anaerobic consortium with a particulate substrate.

Graphene oxide (GO) is an emerging nanomaterial widely used in many manufacturing applications, which is frequently discharged in many industrial effluents eventually reaching biological wastewater treatment systems (WWTS). Anaerobic WWTS are promising technologies for renewable energy production through biogas generation; however, the effects of GO on anaerobic digestion are poorly understood. Thus, it is of paramount relevance to generate more knowledge on these issues to prevent that anaerobic WWTS lose their effectiveness for the removal of pollutants and for biogas production. The aim of this work was to assess the effects of GO on the methanogenic activity of an anaerobic consortium using a particulate biopolymer (starch) and a readily fermentable soluble substrate (glucose) as electron donors. The obtained results revealed that the methanogenic activity of the anaerobic consortium supplemented with starch decreased up to 23-fold in the presence of GO compared to the control incubated in the absence of GO. In contrast, we observed a modest improvement on methane production (>10% compared to the control lacking GO) using 5 mg of GO L-1 in glucose-amended incubations. The decrease in the methanogenic activity is mainly explained by wrapping of starch granules by GO, which caused mass transfer limitation during the incubation. It is suggested that wrapping is driven by electrostatic interactions between negatively charged oxygenated groups in GO and positively charged hydroxyl groups in starch. These results imply that GO could seriously hamper the removal of particulate organic matter, such as starch, as well as methane production in anaerobic WWTS.

Impact of emerging, high-production-volume graphene-based materials on the bioavailability of benzo(a)pyrene to brine shrimp and fish liver cells.

With increasing commercialization of high volume, two-dimensional carbon nanomaterials comes a greater likelihood of environmental release. In aquatic environments, black carbon binds contaminants like aromatic hydrocarbons, leading to changes in their uptake, bioavailability, and toxicity. Engineered carbon nanomaterials can also adsorb pollutants onto their carbon surfaces, and nanomaterial physicochemical properties can influence this contaminant interaction. We used 2D graphene nanoplatelets and isometric carbon black nanoparticles to evaluate the influence of particle morphology and surface properties on adsorption and bioavailability of benzo(a)pyrene, a model aromatic hydrocarbon, to brine shrimp (Artemia franciscana) and a fish liver cell line (PLHC-1). Acellular adsorption studies show that while high surface area carbon black (P90) was most effective at a given concentration, 2D graphene nanoplatelets (G550) adsorbed more benzo(a)pyrene than carbon black with comparable surface area (M120). In both biological models, co-exposure to nanomaterials lead to reduced bioavailability, with G550 graphene nanoplatelets cause a greater reduction in bioavailability or response than the M120 carbon black nanoparticles. However, on a mass basis the high surface area P90 carbon black was most effective. The trends in bioavailability and adsorption were consistent across all biological and acellular studies, demonstrating the biological relevance of these results in different models of aquatic organisms. While adsorption is limited by surface area, 2D graphene nanoplatelets adsorb more benzo(a)pyrene than carbon black nanoparticles of similar surface area and charge, demonstrating that both surface area and shape play important roles in the adsorption and bioavailability of benzo(a)pyrene to carbon nanomaterials.

Tailoring partially reduced graphene oxide as redox mediator for enhanced biotransformation of iopromide under methanogenic and sulfate-reducing conditions.

This work reports the first successful application of graphene oxide (GO) and partially reduced GO (rGO) as redox mediator (RM) to increase the biotransformation of the recalcitrant iodinated contrast medium, iopromide (IOP). Results showed that GO-based materials promoted up to 5.5 and 2.8-fold faster biotransformation of IOP by anaerobic sludge under methanogenic and sulfate-reducing conditions, respectively. Correlation between the extent of reduction of GO and its redox-mediating capacity was demonstrated, which was reflected in faster removal and greater extent of biotransformation of IOP. Further analysis indicated that the biotransformation pathway of IOP involved multiple reactions including deiodination, decarboxylation, demethylation, dehydration and N-dealkylation. GO-based materials could be strategically tailored and integrated in biological treatment systems to effectively enhance the redox conversion of recalcitrant pollutants commonly found in wastewater treatment systems and industrial effluents.

Immobilization of metal-humic acid complexes in anaerobic granular sludge for their application as solid-phase redox mediators in the biotransformation of iopromide in UASB reactors.

Metal-humic acid complexes were synthesized and immobilized by a granulation process in anaerobic sludge for their application as solid-phase redox mediators (RM) in the biotransformation of iopromide. Characterization of Ca- and Fe-humic acid complexes revealed electron accepting capacities of 0.472 and 0.556milli-equivalentsg(-1), respectively. Once immobilized, metal-humic acid complexes significantly increased the biotransformation of iopromide in upflow anaerobic sludge blanket (UASB) reactors. Control UASB reactor (without humic material) achieved 31.6% of iopromide removal, while 80% was removed in UASB reactors supplied with each metal-humic acid complex. Further analyses indicated multiple transformation reactions taking place in iopromide including deiodination, N-dealkylation, decarboxylation and deacetylation. This is the first successful application of immobilized RM, which does not require a supporting material to maintain the solid-phase RM in long term operation of bioreactors. The proposed redox catalyst could be suitable for enhancing the redox conversion of different recalcitrant pollutants present in industrial effluents.

Immobilization of biogenic Pd(0) in anaerobic granular sludge for the biotransformation of recalcitrant halogenated pollutants in UASB reactors.

The capacity of anaerobic granular sludge to reduce Pd(II), using ethanol as electron donor, in an upflow anaerobic sludge blanket (UASB) reactor was demonstrated. Results confirmed complete reduction of Pd(II) and immobilization as Pd(0) in the granular sludge. The Pd-enriched sludge was further evaluated regarding biotransformation of two recalcitrant halogenated pollutants: 3-chloro-nitrobenzene (3-CNB) and iopromide (IOP) in batch and continuous operation in UASB reactors. The superior removal capacity of the Pd-enriched biomass when compared with the control (not exposed to Pd) was demonstrated in both cases. Results revealed 80 % of IOP removal efficiency after 100 h of incubation in batch experiments performed with Pd-enriched biomass whereas only 28 % of removal efficiency was achieved in incubations with biomass lacking Pd. The UASB reactor operated with the Pd-enriched biomass achieved 81 ± 9.5 % removal efficiency of IOP and only 61 ± 8.3 % occurred in the control reactor lacking Pd. Regarding 3-CNB, it was demonstrated that biogenic Pd(0) promoted both nitro-reduction and dehalogenation resulting in the complete conversion of 3-CNB to aniline while in the control experiment only nitro-reduction was documented. The complete biotransformation pathway of both contaminants was proposed by high-performance liquid chromatography-mass spectrometry (HPLC-MS) analysis evidencing a higher degree of nitro-reduction and dehalogenation of both contaminants in the experiments with Pd-enriched anaerobic sludge as compared with the control. A biotechnological process is proposed to recover Pd(II) from industrial streams and to immobilize it in anaerobic granular sludge. The Pd-enriched biomass is also proposed as a biocatalyst to achieve the biotransformation of recalcitrant compounds in UASB reactors.

Graphene oxide as electron shuttle for increased redox conversion of contaminants under methanogenic and sulfate-reducing conditions.

Graphene oxide (GO) is reported for the first time as electron shuttle to increase the redox conversion of the azo compound, reactive red 2 (RR2, 0.5mM), and the nitroaromatic, 3-chloronitrobenzene (3CNB, 0.5mM). GO (5mgL(-1)) increased 10-fold and 7.6-fold the reduction rate of RR2 and 3CNB, respectively, in abiotic incubations with sulfide (2.6mM) as electron donor. GO also increased by 2-fold and 3.6-fold, the microbial reduction rate of RR2 by anaerobic sludge under methanogenic and sulfate-reducing conditions, respectively. Deep characterization of GO showed that it has a proper size distribution (predominantly between 450 and 700nm) and redox potential (+50.8mV) to promote the reduction of RR2 and 3CNB. Further analysis revealed that biogenic sulfide plays a major role on the GO-mediated reduction of RR2. GO is proposed as an electron shuttle to accelerate the redox conversion of recalcitrant pollutants, such as nitro-benzenes and azo dyes.

Effects of surface-engineered nanoparticle-based dispersants for marine oil spills on the model organism Artemia franciscana.

Fine particles are under active consideration as alternatives to chemical dispersants for large-scale petroleum spills. Fine carbon particles with engineered surface chemistry have been shown to stabilize oil-in-water emulsions, but the environmental impacts of large-scale particle introduction to the marine environment are unknown. Here we study the impact of surface-engineered carbon-black materials on brine shrimp (Artemia franciscana) as a model marine microcrustacean. Mortality was characterized at 50-1000 mg/L, and levels of heat shock protein 70 (hsp70) were characterized at sublethal particle concentrations (25-50 mg/L). Functionalized carbon black (CB) nanoparticles were found to be nontoxic at all concentrations, while hydrophobic (annealed) and as-produced CB induced adverse effects at high concentrations. CB was also shown to adsorb benzene, a model hydrocarbon representing the more soluble and toxic low-molecular weight aromatic fraction of petroleum, but the extent of adsorption was insufficient to mitigate benzene toxicity to Artemia in coexposure experiments. At lower benzene concentrations (25-75 mg/L), coexposure with annealed and as-produced CB increased hsp70 protein levels. This study suggests that surface functionalization for increased hydrophilicity can not only improve the performance of CB-based dispersants but also reduce their adverse environmental impacts on marine organisms.

Direct and quinone-mediated palladium reduction by Geobacter sulfurreducens: mechanisms and modeling.

Palladium(II) reduction to Pd(0) nanoparticles by Geobacter sulfurreducens was explored under conditions of neutral pH, 30 °C and concentrations of 25, 50, and 100 mg of Pd(II)/L aiming to investigate the effect of solid species of palladium on their microbial reduction. The influence of anthraquinone-2,6-disulfonate was reported to enhance the palladium reaction rate in an average of 1.7-fold and its addition is determining to achieve the reduction of solid species of palladium. Based on the obtained results two mechanisms are proposed: (1) direct, which is fully described considering interactions of amide, sulfur, and phosphoryl groups associated to proteins from bacteria on palladium reduction reaction, and (2) quinone-mediated, which implies multiheme c-type cytochromes participation. Speciation analysis and kinetic results were considered and integrated into a model to fit the experimental data that explain both mechanisms. This work provides elements for a better understanding of direct and quinone-mediated palladium reduction by G. sulfurreducens, which could facilitate metal recovery with concomitant formation of valuable palladium nanoparticles in industrial processes.

Enhanced microbial decolorization of methyl red with oxidized carbon fiber as redox mediator.

The anaerobic degradation of azo dyes under anaerobic conditions is possible but at a slow rate. Redox mediators (quinones, activated carbon) are used to improve the reduction rate. The aim of this work was to use activated carbon fiber (ACF) as a redox mediator for the anaerobic reduction of the azo dye methyl red. ACF was chemically modified with 8M HNO3 to increase its redox-mediating capacity and used in chemical and anaerobic biological batch assays for the reduction of methyl red. ACF increased its redox-mediating capacity up to 3-fold in chemical assays; in biological assays ACF increased the reduction rate up to 8-fold compared to controls without ACF. However, since the ACF served as support for biomass, a biofilm formed on the fiber significantly reduced its redox-mediating capacity; substrate consumption suggested that the electron transport from ACF to methyl red was the rate-limiting step in the process. These results are the first evidence of the role of ACF as a redox mediator in the reductive decolorization of methyl red, in addition to the effect of biofilm attached to ACF on methyl red reduction. Due to the versatile characteristics of ACF and its redox-mediating capacity, carbon fibers could be used in biological wastewater treatment systems to accelerate the reductive transformation of pollutants commonly found in industrial effluents.

Reactive adsorption of SO2 on activated carbons with deposited iron nanoparticles.

The effect of iron particle size anchored on the surface of commercial activated carbon on the removal of SO(2) from a gas phase was studied. Nanosize iron particles were deposited using forced hydrolysis of FeCl(3) with or without H(3)PO(4) as a capping agent. Dynamic adsorption experiments were carried out on either dry or pre-humidified materials and the adsorption capacities were calculated. The surface of the initial and exhausted materials was extensively characterized by microscopic, porosity, thermogravimetric and surface chemistry. The results indicate that the SO(2) adsorption capacity increased two and half times after the prehumidification process owing to the formation of H(2)SO(4) in the porous system. Iron species enhance the SO(2) adsorption capacity only when very small nanoparticles are deposited on the pore walls as a thin layer. Large iron nanoparticles block the ultramicropores decreasing the accessibility of the active sites and consuming oxygen that rest adsorption centers for SO(2) molecules. Iron nanoparticles of about 3-4 nm provide highly dispersed adsorption sites for SO(2) molecules and thus increase the adsorption capacity of about 80%. Fe(2)(SO(4))(3) was detected on the surface of exhausted samples.

Reduction of palladium and production of nano-catalyst by Geobacter sulfurreducens.

The present study is the first report on the ability of Geobacter sulfurreducens PCA to reduce Pd(II) and produce Pd(0) nano-catalyst, using acetate as electron donor at neutral pH (7.0 ± 0.1) and 30 °C. The microbial production of Pd(0) nanoparticles (NPs) was greatly enhanced by the presence of the redox mediator, anthraquinone-2,6-disulfonate (AQDS) when compared with controls lacking AQDS and cell-free controls. A cell dry weight (CDW) concentration of 800 mg/L provided a larger surface area for Pd(0) NPs deposition than a CDW concentration of 400 mg/L. Sample analysis by transmission electron microscopy revealed the formation of extracellular Pd(0) NPs ranging from 5 to 15 nm and X-ray diffraction confirmed the Pd(0) nature of the nano-catalyst produced. The present findings open the possibility for a new alternative to synthesize Pd(0) nano-catalyst and the potential application for microbial metal recovery from metal-containing waste streams.