RESUMO
A novel, simple, and rapid method is demonstrated for measuring the pore size and pore size distribution of filtration membranes (FMs) used in aqueous applications with fluorescence probes. Because the selected fluorescent probes are mixable and have strong signals, combined with the operation of dead-end filtration, this method only requires small amounts of reagents; additionally, it is time-efficient by avoiding multiple rounds of filtration. This method detects the size of a FM pore throat (i.e., the narrowest position of a pore tunnel), which is more consistent with the actual filtration situation. The conditions, such as probe concentration, temperature, transmembrane pressure difference, and types of surfactants, have been optimized. The experimental results show that the fluorescence probe method has good accuracy and reproducibility for measuring the pore size and pore size distribution of both organic and inorganic FMs. The method is particularly suitable for rapid testing of the filtration performance (nominal pore size≥0.02 µm) of purchased or synthetic membranes in the laboratory.
RESUMO
Silicon carbide (SiC) membrane has emerged as a promising class of inorganic ceramic membranes with many advantageous attributes and has been used for a variety of industrial microfiltration (MF) processes. The state-of-the-art industrial manufacturing of SiC membranes based on the particle sintering method can only achieve an average pore size that ranges from 40 nm to a few micrometers, which is still unsatisfactory for ultrafiltration (UF) applications. Thus, the pore size control of SiC membranes remains a focus of continuing study. Herein, we provide an in situ sol-gel modification strategy to tailor the pore size of SiC membranes by a superficial deposition of SiO2 onto the membrane surface and membrane pore channels. Our in situ sol-gel modification method is simple and effective. Furthermore, the physical characteristics and the filtration performance of the membrane can easily be controlled by the in situ reaction time. With an optimal in situ reaction time of 30 min, the average pore size of the membrane can be reduced from macropores (400 nm) to mesopores (below 20 nm), and the retention ability for 20 nm fluorescent PS microspheres can be improved from 5% to 93%; the resultant SiC/SiO2 composite membranes are imparted with water permeance of 77 L·m-2·h-1·bar-1, improved anti-protein-fouling properties, excellent performance, and anti-acid stabilities. Therefore, modified SiC/SiO2 membranes based on the in situ sol-gel process have great potential as UF membranes for a variety of industrial processes.
RESUMO
Zero-valent iron (ZVI) and modified ZVI have been investigated extensively for groundwater remediation. However, ZVI based powder was difficult to be applied directly as permeable reactive barrier (PRB) materials due to their low water permeability and usage rate. In this study, sulfide iron-copper bimetal was prepared by ball milling, which is environment-friendly without second contamination. The optimal preparation parameters of sulfide iron-copper bimetal for Cr(VI) removal were determined (Cu/Fe ratio (w/w), 0.018; FeS/Fe ratio (w/w), 0.1213; ball milling speed, 450 rpm; ball milling time, 5 h). A composite permeable material was prepared by sintering a mixture of sulfide iron-copper bimetal, sludge, and kaolin. The parameters for composite permeable material preparation including sludge content and particle size, and sintering time were optimized, which were 60%, 60-75 mesh, and 4 h, respectively. The optimal composite permeable material was characterized by SEM-EDS, XRD, and FTIR. The results demonstrated preparation parameters can affect the hydraulic conductivity and hardness of composite permeable material. High sludge content, small particles size, and moderate sintering time resulted in high permeability of composite permeable material and were beneficial for Cr(VI) removal. The dominant Cr(VI) removal mechanism was reduction, and the reaction followed pseudo-first order kinetics. Conversely, low sludge content and large particle size, and long sintering time lead to low permeability of composite permeable material. Chromate removal was mainly by chemisorption following pseudo-second order kinetics. The hydraulic conductivity and hardness of the optimal composite permeable material achieved 1.732 cm/s and 50, respectively. The results of column experiments indicated that its Cr(VI) removal capacity was 0.54 mg/g, 0.39 mg/g and 0.29 mg/g at pH 5, 7 and 9, respectively. The ratio of Cr(VI) to Cr(III) on composite permeable material surface was similar under acidic and alkaline conditions. This study will provide an effective reactive material of PRB for field application.
Assuntos
Ferro , Poluentes Químicos da Água , Ferro/química , Cobre , Cinética , Esgotos , Poluentes Químicos da Água/análise , Cromo/química , SulfetosRESUMO
Solar photovoltaics (PVs) installation would increase 20-fold by 2050; however, considerable greenhouse gas (GHG) emissions are generated during the cradle-to-gate production, with spatiotemporal variances depending on the grid emission. Thus, a dynamic life cycle assessment (LCA) model was developed to assess the accumulated PV panels with a heterogeneous carbon footprint if manufactured and installed in the United States. The state-level carbon footprint of solar electricity (CFE PV-avg) from 2022 to 2050 was estimated using several cradle-to-gate production scenarios to account for emissions stemming from electricity generated from solar PVs. The CFE PV-avg (min 0.032, max 0.051, weighted avg. 0.040 kg CO2-eq/kWh) in 2050 will be significantly lower than that of the comparison benchmark (min 0.047, max 0.068, weighted avg. 0.056 kg CO2-eq/kWh). The proposed dynamic LCA framework is promising for planning solar PV supply chains and, ultimately, the supply chain of an entire carbon-neutral energy system to maximize the environmental benefits.
RESUMO
This paper comprehensively evaluates the dynamic effects on China's environment and economy during the COVID-19 pandemic. Results show that the COVID-19 lockdown resulted in a temporary improvement in air quality. Furthermore, nitrogen dioxide (NO2) levels in the atmosphere in China were 36% lower than in the week after last year's Lunar New Year holiday, but this also led to an economic downturn. Moreover, the aerosol optical depth (AOD) decreased significantly. During the back-to-work period, the economy recovered and there was an increase in energy consumption, and CO2, NO2 emissions sharply increased to pre-lockdown levels. In the post-lockdown period, the AOD was lower than that of the same period last year. This study can provide reference for environmental policy making, as it demonstrates to what extent the control of pollution sources can improve air quality. Precise emission reduction and regional joint prevention and control are important and effective means for the prevention and control of O3 pollution. The health and economic benefits of COVID-19 pandemic control measures are incalculable. And this can provide an effective scientific basis and theoretical support for the prevention and control of air pollution.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , COVID-19 , Humanos , COVID-19/epidemiologia , COVID-19/prevenção & controle , SARS-CoV-2 , Dióxido de Nitrogênio/análise , Pandemias/prevenção & controle , Poluentes Atmosféricos/análise , Monitoramento Ambiental , Controle de Doenças Transmissíveis , Poluição do Ar/prevenção & controle , China/epidemiologia , Material ParticuladoRESUMO
Mn3O4 powders with nanometer size are successfully synthesized by a simple one-step method via flame spray pyrolysis. The precursor droplet is generated by heating under high temperature flame with fixed flow rate, and the exothermic reaction is induced to form nanosized Mn3O4 powders. When used as anode material for lithium-ion battery, the Mn3O4 exhibits good cycling capacity and rate performance. It delivers a specific capacity of 1,182 mA h g-1 over 110 cycles at a current density of 200 mA g-1, and has a high capacity of 140 mA h g-1 at 5,000 mA g-1.
RESUMO
The use of antibiotics has become an indispensable part of the production and life of human society. Among them, sulfonamide antibiotics widely used in humans and animals are considered to be one of the most crucial antibiotics. However, antibiotics are difficult to degrade naturally, leading to an accumulation in the environment and a potential hazard to human health. In this paper, WS2 as a co-catalyst could reduce trace Fe(III) to Fe(II) which exhibited a great activating ability to PS through the exposed W(IV) active sites, and formed the Fe(III)/Fe(II) cycle to degrade sulfachloropyridazine (SCP) continuously. This paper systematically discussed the degradation of SCP under different conditions in the PS/WS2/Fe(III) system, including the amount of WS2, Fe(III) concentration, PS concentration, initial pH, natural organic matter (NOM) and common anions (NO3-, Cl-, HCO3-, HPO42- and H2PO4-). The experimental results showed that PS/WS2/Fe(III) system possessed a strong degradation ability for SCP in a wide pH range. NO3- and Cl- could promote the degradation of SCP a little. HCO3-, HPO42- and H2PO4- could significantly inhibit the degradation of SCP. The main types of free radicals that degraded SCP were explored. In addition, the stability and reusability of WS2 were examined, and two possible degradation pathways of SCP were proposed.
Assuntos
Sulfacloropiridazina , Poluentes Químicos da Água , Ânions , Antibacterianos , Compostos Férricos/química , Compostos Ferrosos , Humanos , Oxirredução , Sulfatos/química , Poluentes Químicos da Água/análiseRESUMO
The alkali digestion pretreatment method in the United States Environmental Protection Agency (USEPA) Method 3060A could underestimate the content of Cr(VI) in Cr-contaminated soils, especially for soils mixed with chromite ore processing residue (COPR), which leads to a misjudgment of the Cr(VI) level in soils after remediation, causing secondary pollution to the environment. In this study, a new pretreatment method to analyze Cr(VI) concentration in contaminated soils was established. The impacts of soil quality, particle size, alkali digestion time and the rounds of alkali digestion on Cr(VI) detection in contaminated soils was explored and the alkali digestion method was optimized. Compared with USEPA Method 3060A, the alkaline digestion time was prolonged to 6 h and multiple alkali digestion was employed until the amount of Cr(VI) in the last extraction was less than 10% of the total amount of Cr(VI). Because Cr(VI) in COPR is usually embedded in the mineral phase structure, the hydration products were dissolved and Cr(VI) was released gradually during the alkaline digestion process. The amount of Cr(VI) detected showed high correlation coefficients with the percentage of F1 (mild acid-soluble fraction), F2 (reducible fraction) and F4 (residual fraction). The Cr(VI) contents detected by the new alkaline digestion method and USEPA Method 3060A showed significant differences for soil samples mixed with COPR due to their high percentage of residual fraction. This new pretreatment method could quantify more than 90% of Cr(VI) in Cr-contaminated soils, especially those mixed with COPR, which proved to be a promising method for Cr(VI) analysis in soils, before and after remediation.
Assuntos
Resíduos Industriais , Poluentes do Solo , Álcalis/análise , Álcalis/metabolismo , Cromo/análise , Resíduos Industriais/análise , Solo/química , Poluentes do Solo/análiseRESUMO
The binder is an indispensable battery component that maintains the integrity of the electrode. Polyvinylidene fluoride (PVDF) is most commonly used as a binder in rechargeable batteries; however, it is associated with the toxic and expensive N-methyl-2-pyrrolidone organic solvent. Here, through the cross-linking of sodium alginate (SA) with metal cations, a high-performance hydrogel binder is developed that maintains the stability of MnO2 cathodes in an aqueous electrolyte. Owing to the strong adhesion, high hydrophilicity, and good mechanical stability resulting from the strong bonding of Ca2+ with SA, a commercial microsized MnO2 cathode with a Ca-SA binder delivered a capacity above 300 mAh/g at 1â C, which was larger than those of Mn-SA and Zn-SA (â¼200â mAh/g) and PVDF (â¼150â mAh/g) binders, and a capacity of 250â mAh/g at 3â C for over 200â cycles. These encouraging results could unlock the enormous potential of aqueous binders for practical applications in aqueous batteries.
RESUMO
The manganese is successfully induced as a "bridge joint" to fabricate a new adsorbent (CNC-Mn-PEI) connecting cellulose nanocrystal (CNC) and polyethyleneimine (PEI) respectively. It was used to remove As (III) from waste water. It has been proved that the incompact CNC and PEI were successfully connected by Mn ions, which induced the formation of O-Mn-O bonds and the removal efficiency is maintained in the broad pH range of 4-8, even with the influence of NO3- and CO32-. The CNC-Mn-PEI was characterized by Brunauer-Emmett-Telley (BET) method and the results showed that the nanoparticle of the specific surface area was 106.5753 m2/g, it has a significant improvement, compared with CNC-Mn-DW (0.1918 m2/g). The isotherm and kinetic parameters of arsenic removal on CNC-Mn-PEI were well-fitted by the Langmuir and pseudo-second-order models. The maximum adsorption capacities toward As (III) was 78.02 mg/g. After seven regeneration cycles, the removal of As (III) by the adsorbent decreased from 80.78% to 68.2%. Additionally, the hypothetical adsorption mechanism of "bridge joint" effect was established by FTIR and XPS, which provided the three activated sites from CNC-Mn-PEI can improve the arsenic removal efficiency, and providing a new stratagem for the arsenic pollution treatment.
Assuntos
Arsênio , Arsenitos , Nanocompostos , Nanopartículas , Poluentes Químicos da Água , Adsorção , Arsênio/química , Arsenitos/química , Celulose/química , Concentração de Íons de Hidrogênio , Íons , Cinética , Manganês/química , Nanopartículas/química , Polietilenoimina/química , Poluentes Químicos da Água/análiseRESUMO
Wound repair remains a huge clinical challenge, which can cause bleeding, infection, and patient death. In our current research, a bioactive, injectable, multifunctional composite hydrogel doped with nanospheres was prepared with antibacterial and angiogenesis-promoting functions for the treatment of wounds. Amino groups in ε-polylysine (ε-EPL) undergo dynamic Schiff base reaction cross-linking with oxidized hyaluronic acid (OHA), and F127 exhibits unique temperature sensitivity to form an injectable thermosensitive hydrogel (FHE10), which can form a hydrogel to cover the wound at body temperature. Nanospheres (PNs) prepared using poly (glyceryl-sebacate-acrylate) (PGSA) were loaded into hydrogels (FHE10) for promoting wound repair. The prepared FHE10 exhibited rapid gelation, good injectable abilities, and showed resistance to the flourish of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In vitro investigations showed that FHE10 had good hemocompatibility and cytocompatibility. FHE10@PNs exhibited good proliferation, migration, and tube formation of human umbilical vein endothelial cells (HUVECs) and human foreskin fibroblasts (HFF-1). Furthermore, FHE10@PNs significantly promoted reepithelialization and collagen deposition as well as micro-vascularization compared with the use of FHE10 or PNs alone, thereby accelerating the repair of wounds. In general, this study demonstrated that the multifunctional injectable composite hydrogel showed great potential in wound treatment.
RESUMO
Facile and low-cost preparation are essential in the conversation of agricultural waste into biochar. In this work, nitrogen-doped biochar (NBC-350-0.1) was prepared by thermal decomposition of urea (urea/biochar = 0.1:1 mass ratio) at a low temperature of 350 °C. NBC-350-0.1 showed good performance for Pb(II) removal with the maximum adsorption capacity of 130.87 mg g-1 at 25 °C, which was five times that of pristine biochar (BC). Adsorption kinetics, isotherms and thermodynamics studies indicated that the adsorption of Pb(II) by NBC-350-0.1 or BC was the homogeneous monolayer adsorption with chemical action as the rate-limiting step, and was accompanied by spontaneous endothermic. Further analysis showed that the removal of Pb(II) on NBC-350-0.1 and BC depended on the complexation with unsaturated carbon bonds and ion exchange with Ca(II). Moreover, graphitic- and pyridinic-N in NBC-350-0.1 exerted a key part in the adsorption of Pb(II). NBC-350-0.1 regenerated by NaOH exhibited excellent recycling performance keeping the original removal efficiency at 84% after five cycles. In addition, this N doping method is suitable for improving the performance of coffee grounds, sawdust, and bagasse biochar. These results would provide an idea for obtaining recyclable N-doped biochar to treat the Pb(II) polluted wastewater.
Assuntos
Pirólise , Poluentes Químicos da Água , Adsorção , Carvão Vegetal , Cinética , Chumbo , Nitrogênio , Temperatura , Poluentes Químicos da Água/análiseRESUMO
Increasing the energy band gap under the premise to maintain a large nonlinear optical (NLO) response is a challenging issue for the exploration and molecular design of mid-infrared nonlinear optical crystals. Utilizing a charge-transfer engineering method, we designed and synthesized a rare earth chalcogenide, KYGeS4. With an NLO effect as large as that in AgGaS2, KYGeS4 breaks through the limitation of energy band gap, i.e., the "3.0 eV wall", in NLO rare earth chalcogenides, and thus exhibits an excellent comprehensive NLO performance. First-principles electronic structure analysis demonstrates that the large band gap in KYGeS4 is ascribed to the decreased covalency of Y-S bonds by transferring charge from [YS7] to [GeS4] polyhedra. The charge-transfer engineering strategy would have significant implications for the exploration of good-performance NLO crystals.
RESUMO
The green treatment of dye wastewater has always been a research hotspot in the environmental field. The photocatalytic technology is considered to be a simple and effective strategy to remove dyes in wastewater. A new type of NiWO4/WO3 Z-scheme heterojunction microspheres were synthesized by a simple hydrothermal method and impregnation-calcination process. The crystal structure, microscopic morphology, optical and electrochemical properties of the samples were systematically characterized. The photocatalytic activity of methylene blue (MB) was studied by visible light irradiation. The results show that the direct Z-scheme heterojunction formed by NiWO4/WO3 effectively reduces the transfer resistance of photogenerated carriers and improves the separation efficiency of photogenerated carriers. The degradation rates of NiWO4/WO3-4 Z-scheme heterojunction microspheres to MB dye are 1.8 and 3.2 times higher than that of pure WO3·2H2O and WO3 microspheres, respectively. Combined with the Mott-Schottky curve and the active species capture experiments, a possible Z-scheme photogenerated carrier transfer mechanism is proposed. This study provides a method for the development and design of Z-scheme heterojunction photocatalysts in the field of wastewater purification.
RESUMO
Pattern recognition, also called "array sensing," is a recognition strategy with a wide and expandable analysis range, based on high-throughput analysis data. In this work, we constructed a sensor array for the identification of targets including bacterial pathogens and proteins by using FAM-labeled DNA probes and 2D nanosheet materials. We designed an ordered and extendible DNA library for the collection of recognition probes. Unlike traditional DNA probes with random and massive sequences, our DNA library was constructed following a 5-digit binary number (00000-11111, 0 = CCC, and 1 = TTT), and especially, 8 special symmetry sequences were chosen from the library. Two different nanosheet materials were used as the quencher. When targets were added, the interaction between DNA and the nanosheets was competitively affected, and as a result, the fluorescence signal changed accordingly. Finally, by using our fluorescent sensor array, 17 bacteria and 8 proteins were precisely recognized. We believe that our work has provided a simple and valuable strategy for the improvement of the recognition range and discrimination precision for the development of pattern recognition.
Assuntos
Nanoestruturas , DNA/genética , Sondas de DNA/genética , Corantes Fluorescentes , Biblioteca Gênica , Espectrometria de FluorescênciaRESUMO
Real-world vehicle emission factors (EFs) for the total intermediate volatile organic compounds (total-IVOCs) and volatile organic compounds (VOCs) from mixed fleets of vehicles were quantified in the Yangtze tunnel in Shanghai. Relationships of EFs of IVOCs with fleet compositions and vehicle speed as well as secondary organic formation potentials (SOAFPs) from IVOCs and VOCs were studied. Multiple linear regression (MLR) was used to estimate EFs of total-IVOCs for gasoline and diesel vehicles. IVOCs were classified into unresolved complex mixtures (unspeciated cyclic compounds and branched alkanes (b-alkanes)) and speciated targets (11 n-alkanes and ten polycyclic aromatic hydrocarbons (PAHs)). The results showed that the average EF of total-IVOCs was 24.9 ± 7.8 mg/(km·veh), which was comparable to that of VOCs. Unspeciated cyclic compounds and b-alkanes dominated the main composition (~77% and ~19%), followed by n-alkanes (~4%) and PAHs (~1%). EFs of IVOCs showed a significant, positive relationship with diesel vehicle fractions (p < 0.05). EFs of IVOCs dropped notably with the decrease of the diesel vehicle fractions. SOAFP produced by the total organic compounds (IVOCs + VOCs) was 8.9 ± 2.5 mg/(km·veh), in which up to 86% of SOAFP was from IVOCs. Estimated EFs of total-IVOCs for gasoline vehicles and diesel vehicles were 15.3 and 219.8 mg/(km·veh) respectively. Our results demonstrate that IVOCs emitted from diesel vehicles are the main emission sources under real world conditions and significant contributions of IVOCs emissions to SOA formation is evident, which indicates the necessity of making control policies to reduce IVOCs emissions from vehicles.
RESUMO
All kinds of soil conditioners have been used to improve soil quality. The application of many traditional soil conditioners was limited by single performance. In this study, a novel multifunctional microspheric soil conditioner was prepared based on Arabic gum, gelatin, chitosan and ß-cyclodextrin. Arabic gum and gelatin (AG-GL) microspheric carriers, which could load ferrous sulfate (FS), were synthesized via complex coagulation method. The AG-GL(FS) microspheres were covered by chitosan quaternary ammonium salt (CQAS) through single coagulation method. And ß-cyclodextrin (ß-CD) was used as the outermost shell to improve chemical stability of the soil conditioner by saturated solution method. Finally, the novel multifunctional microspheric soil conditioner AG-GL/CQAS/ß-CD-FS was obtained and characterized by Fourier transform infrared spectroscopy, thermogravimetric analyzer, polarizing microscope, scanning electron microscope and particle size analyzer. The novel soil conditioner shows good nutrient slowly-releasing, water retention, heavy metal ions adsorption and antibacterial performances with the particle size of 14-17 µm and high thermal decomposition temperature, which has the potential application in improving soil quality.
Assuntos
Quitosana/química , Gelatina/química , Goma Arábica/química , Solo/química , beta-Ciclodextrinas/química , Adsorção , Compostos Ferrosos/química , Microesferas , Tamanho da Partícula , Compostos de Amônio Quaternário/química , Sais , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
Since the application of RNA interference (RNAi) is rapidly developing in GMO technology, accurate and sensitive detection of functional RNA molecules was urgently needed, for the safety and functional assessment of RNAi crops. In this work, we developed an electrochemical biosensor for transgene-derived long RNA based on a poly-adenine (polyA) DNA capture probe. The polyA self-assembling monolayer (SAM) provided enhanced interface stability and optimized surface density for the subsequent hybridization of the long RNA molecule. A multiple reporter probe system (MRP) containing 12 reporter probes (RPs) and 2 spacers was applied to open the complex molecular secondary structure and hybridize with the long RNA, with the critical assistance of dimethyl sulfoxide (DMSO). By using 3 addressable RPs, structural recognition was performed among long stem-loop RNA, long dsRNA (no loop), and siRNA. Excellent selectivity was achieved when the extracted total RNA samples were directly analyzed. When reverse transcription recombinase polymerase amplification (RT-RPA) technology was combined, the sensitivity was improved to 10 aM. To the best of our knowledge, this is the first electrochemical biosensor with the excellent capability of quantification and structural analysis of the long RNA of the RNAi GMO. Our work shows great potential in a wide range of RNAi GMO samples.
Assuntos
Técnicas Biossensoriais , Zea mays , Sondas de DNA , Técnicas Eletroquímicas , Poli A , Interferência de RNA , Zea mays/genéticaRESUMO
Rechargeable aqueous Zn-ion batteries promise high capacity, low cost, high safety, and sustainability for large-scale energy storage. The Zn metal anode, however, suffers from the dendrite growth and side reactions that are mainly due to the absence of an appropriate solid electrolyte interphase (SEI) layer. Herein, the in situ formation of a dense, stable, and highly Zn2+ -conductive SEI layer (hopeite) in aqueous Zn chemistry is demonstrated, by introducing Zn(H2 PO4 )2 salt into the electrolyte. The hopeite SEI (≈140 nm thickness) enables uniform and rapid Zn-ion transport kinetics for dendrite-free Zn deposition, and restrains the side reactions via isolating active Zn from the bulk electrolyte. Under practical testing conditions with an ultrathin Zn anode (10 µm), a low negative/positive capacity ratio (≈2.3), and a lean electrolyte (9 µL mAh-1 ), the Zn/V2 O5 full cell retains 94.4% of its original capacity after 500 cycles. This work provides a simple yet practical solution to high-performance aqueous battery technology via building in situ SEI layers.
RESUMO
Biodegradation has been considered as an ideal technique for total petroleum hydrocarbon (TPH) contamination, but its efficiency is limited by its application in the field. Herein, an original TPH-degrading strain, SCYY-5, was isolated from contaminated oil sludge and identified as Acinetobacter sp. by 16S rDNA sequence analysis. The biological function of the isolate was investigated by heavy metal tolerance, carbon, and nitrogen source and degradation tests. To enhance its biodegradation efficiency, the response surface methodology (RSM) based on a function model was adopted to investigate and optimize the strategy of microbial and environmental variables for TPH removal. Furthermore, the performance of the system increased to 79.94% with the further addition of extra nutrients, suggesting that the RSM and added nutrients increased the activity of bacteria to meet the needs of the co-metabolism matrix during growth or degradation. These results verified that it is feasible to adopt the optimal strategy of combining bioremediation with RSM to improve the biodegradation efficiency, for contaminated oil sludge.