Muonic atom spectroscopy with microgram target material.

Muonic atom spectroscopy-the measurement of the x rays emitted during the formation process of a muonic atom-has a long standing history in probing the shape and size of nuclei. In fact, almost all stable elements have been subject to muonic atom spectroscopy measurements and the absolute charge radii extracted from these measurements typically offer the highest accuracy available. However, so far only targets of at least a few hundred milligram could be used as it required to stop a muon beam directly in the target to form the muonic atom. We have developed a new method relying on repeated transfer reactions taking place inside a 100 bar hydrogen gas cell with an admixture of 0.25% deuterium that allows us to drastically reduce the amount of target material needed while still offering an adequate efficiency. Detailed simulations of the transfer reactions match the measured data, suggesting good understanding of the processes taking place inside the gas mixture. As a proof of principle we demonstrate the method with a measurement of the 2p-1s muonic x rays from a 5  µ g gold target.

Competition between Allowed and First-Forbidden ß Decay: The Case of

The ß decay of ^{208}Hg into the one-proton hole, one neutron-particle _{81}^{208}Tl_{127} nucleus was investigated at CERN-ISOLDE. Shell-model calculations describe well the level scheme deduced, validating the proton-neutron interactions used, with implications for the whole of the N>126, Z<82 quadrant of neutron-rich nuclei. While both negative and positive parity states with spin 0 and 1 are expected within the Q_{ß} window, only three negative parity states are populated directly in the ß decay. The data provide a unique test of the competition between allowed Gamow-Teller and Fermi, and first-forbidden ß decays, essential for the understanding of the nucleosynthesis of heavy nuclei in the rapid neutron capture process. Furthermore, the observation of the parity changing 0^{+}→0^{-}ß decay where the daughter state is core excited is unique, and can provide information on mesonic corrections of effective operators.

Cutting efficiency of conventional and heat-treated nickel-titanium rotary or reciprocating glide path instruments.

AIM: To compare the cutting efficiency of several glide path files: HyFlex EDM Glidepath File (HEGF), One G (OG), R-Pilot (RP) and WaveOne Gold Glider (WOGG) at different cutting inclinations. METHODOLOGY: Cutting efficiency of 120 new HEGF, OG, RP and WOGG was tested at 90°, 70° and 45° inclination in relation to the sample. Depending on manufacturer instructions, instruments were tested in continuous rotation or reciprocating motion against standardized gypsum samples for 120 s using a customized apparatus. Cutting efficiency was determined by measuring the weight loss and the length of the sample cut. Data were analysed using two-way analysis of variance and Tukey t-test (P < 0.05). RESULTS: RP and WOGG had greater cutting ability than HEGF and OG in all tested angles. RP tested at 45° had significantly greater cutting efficiency than when tested at 90° and 70° (P < 0.05). OG was not significantly different in terms of cutting ability at 90°, 70° and 45° (P > 0.05). HEGF and WOGG had significantly greater cutting efficiency at 45° and 70° compared to 90° (P < 0.05), with no significant difference between 45° and 70° (P > 0.05). RP had the greatest cutting ability at all tested angles. CONCLUSIONS: Reciprocating glide path instruments had greater cutting efficiency compared to those in continuous rotation. An inclined insertion (45° or 70°) increased the cutting ability of glide path files except for One G conventional NiTi files.

Colorimetric study about the stratification's effect on colour perception of resin composites.

To evaluate the influence of a different order of dentin and enamel layers on stratification appearance of different resin composites. 144 Dentin (D) and Enamel (E) composite samples (Clearfil Majesty ES-2 Premium, Brilliant EverGlow, Estelite Asteria), 1 mm thick, were divided into 12 configurations for each composite, with Enamel-Dentin-Dentin-Enamel (EDDE) assumed as target. The colour specification was conducted using a spectrophotometer, elaborating the results with the CIE L*a*b* colour coordinates and calculating the colour difference in terms of [Formula: see text] quantity. A value of this last major of 3.3 was considered not clinically acceptable. Moreover, data were analyzed using two-way analysis of variance and Tukey post hoc test (P < 0.05). For Clearfil Majesty ES-2 Premium and Brilliant EverGlow, six configurations showed [Formula: see text] > 3.3 compared to gold standard EDDE. [Formula: see text] was influenced especially by b* and L* coordinates (P < 0.05). EDED showed no visual difference (0 < [Formula: see text] < 1.1) for both composites. For Estelite Asteria, two configurations reported [Formula: see text] > 3.3 compared to EDDE. In particular, the L* coordinate influenced [Formula: see text] results (P < 0.05). EDDD was the best configuration (0 < [Formula: see text] < 1.1). Within the limits of a vitro study, Brilliant EG showed more dependence from order and thickness of stratification (resulting more similar to Clearfil Majesty ES-2 Premium); therefore, it could be indicated for more complex aesthetic restorations. Estelite Asteria seems to be able to balance small differences in thickness of dentin and enamel layers, and consequently, it is more indicated to different clinical situations.

Retreatability of two hydraulic calcium silicate-based root canal sealers using rotary instrumentation with supplementary irrigant agitation protocols: a laboratory-based micro-computed tomographic analysis.

AIM: To investigate the retreatability of two calcium silicate-based materials (BioRoot RCS, Septodont, Saint-Maur-des-Fossés, France and GuttaFlow Bioseal, Colténe/Whaledent AG, Langenau, Germany) using rotary instrumentation combined with supplementary irrigant agitation techniques using extracted teeth in a laboratory setting. METHODOLOGY: The root canals of extracted single-rooted mandibular premolars were prepared to size 40, .04 taper and randomly divided into two experimental groups (n = 36) depending on the root filling material. Root canals were filled with gutta-percha and GuttaFlow Bioseal (GB, group 1) or BioRoot RCS (BR, group 2), scanned using a micro-CT scanner and stored in phosphate-buffered saline for 4 months. Removal of root filling was performed with rotary instruments, and specimens were randomly allocated to one of the subgroups for supplementary irrigant agitation (n = 12): subgroup A, syringe irrigation (control); subgroup B, Tornado Brush (M.I.B, Suresnes, France) and subgroup C, ultrasonically activated irrigation. Specimens were re-scanned with micro-CT to calculate the volume of remnant root filling material. Data were analysed statistically by two-way ANOVA and post hoc Tukey's tests (P = 0.05). RESULTS: Specimens filled with GuttaFlow Bioseal were associated with a significantly smaller volume of root filling remnants compared with BioRoot RCS (P < 0.05). There was no significant difference between the supplementary irrigant agitation subgroups in the removal of GB (P > 0.05). In group 2 (BioRoot RCS), subgroups B (Tornado Brush) and C (ultrasonically activated irrigation) were associated with a significantly smaller volume of root filling remnants compared with subgroup A (syringe irrigation) (P < 0.05). There was no significant difference between subgroups B and C (P > 0.05). CONCLUSIONS: Significantly smaller volumes of root filling remnants of GuttaFlow Bioseal, than BioRoot RCS, were present after their removal with rotary instruments and irrigation. Supplementary irrigant agitation techniques were associated with smaller volumes of remnants during the removal of BioRoot RCS but not that of GuttaFlow Bioseal.

Influence of continuous rotation or reciprocation of Optimum Torque Reverse motion on cyclic fatigue resistance of nickel-titanium rotary instruments.

AIM: To evaluate the resistance to cyclic fatigue of ProTaper Next (PTN; Dentsply Sirona, Ballaigues, Switzerland), Revo-S (Micro-Mega, Besançon, France), Mtwo (Sweden & Martina, Padova, Italy), Twisted Files (TF, SybronEndo, Orange, CA, USA) and EndoWave (J Morita Corporation, Osaka, Japan) used in continuous rotation or in reciprocation of Optimum Torque Reverse motion (OTR). METHODOLOGY: A total of 120 nickel-titanium files were tested. Twenty-four instruments for each brand were divided into two groups (n = 12) on the basis of the motion tested: continuous rotation (Group 1) or reciprocation of OTR motion (Group 2). Resistance to cyclic fatigue was determined by recording time to fracture (TtF) in a stainless steel artificial canal with a 60° angle of curvature and 5 mm radius of curvature. The TtF data were analysed by using two-way analysis of variance (anova) and Bonferroni's post hoc tests at 0.05. RESULTS: Mtwo and TF had significantly higher TtF when compared with all other instruments, both in continuous rotation and in reciprocation of OTR motion (P < 0.0001 and P < 0.05, respectively). No difference was observed between Mtwo and TF (P > 0.05), in both motions. PTN was associated with higher cyclic fatigue resistance than Revo-S and EndoWave, both in continuous rotation and in reciprocation of OTR motions (P < 0.0001). No difference was observed between Revo-S and EndoWave, in both motions (P > 0.05). Reciprocating OTR motion improved TtF of all instruments (P < 0.0001). CONCLUSIONS: Reciprocation of OTR motion improved significantly cyclic fatigue resistance of all instruments tested compared with continuous rotation. Mtwo and TF had significantly higher cyclic fatigue than the other instruments, in both continuous rotation and reciprocation of OTR motion.

Cyclic fatigue resistance of two nickel-titanium rotary instruments in interrupted rotation.

AIM: To investigate the influence of interrupted rotation on cyclic fatigue of two nickel-titanium rotary instruments. METHODOLOGY: Cyclic fatigue of 300 new ProTaper Next size X1; X2 and Mtwo size 10, .04 taper; size 15, .05 taper; size 20, .06 taper and size 25, .06 taper instruments was tested in continuous or interrupted rotation. Fifty files of the same brand and size were randomly assigned to five groups (n = 10). Group 1 instruments were tested in continuous rotation; groups 2 and 3 in paused rotation for 1 s every 10 or 20 s, respectively; groups 4 and 5 in interrupted rotation for 5 s every 10 or 20 s, respectively. Cyclic fatigue was expressed in time to fracture (TtF) in an artificial canal with 60° angle and 5 mm radius of curvature. The fracture surface was examined with a scanning electron microscope (SEM). Data were evaluated by two-way analysis of variance. RESULTS: Cyclic fatigue of groups 2 and 4 of ProTaper Next X2 and Mtwo size 25, .06 taper was significantly lower than that of group 1 of the same instruments (P < 0.01). ProTaper Next X2 had significantly reduced cyclic fatigue in groups 3 and 5 (P < 0.05). No differences were found by interrupting the rotation for 1 or 5 s in all instruments (P > 0.05). Fatigue of other instruments was not affected by interrupted rotation (P > 0.05). CONCLUSIONS: Interrupted rotation reduced cyclic fatigue resistance of ProTaper Next X2 and Mtwo size 25, .06 taper, especially when a higher number of interruptions was performed.

Shaping ability of two nickel-titanium instruments activated by continuous rotation or adaptive motion: a micro-computed tomography study.

OBJECTIVES: The objective of the study was to evaluate the shaping ability of curved root canals using Twisted File Adaptive (TFA) files (SybronEndo, Orange, CA) and Mtwo (Sweden & Martina, Padova, Italy) activated by continuous rotation or adaptive motion. MATERIALS AND METHODS: Thirty-two mandibular molars with two separate mesial canals and severe angles of curvature were selected. Each canal was randomly assigned to one of the four experimental groups (n = 16): TFA and Mtwo files used in continuous rotation (groups 1 and 3) or in adaptive motion (groups 2 and 4). Root canals before and after preparation were assessed by micro-computed tomography. Volume, surface area, canal transportation, and centering ability were recorded and analyzed using two-way analyses of variance. RESULTS: Volume and surface area increased less with TFA files in continuous rotation than in other groups (P < 0.001 and P < 0.01, respectively, for each comparison) that were not different (P > 0.05). TFA files had significantly less transportation and higher centering ability than Mtwo both in continuous and adaptive motion (P < 0.0001). Centering ratio, but not canal transportation, was improved by adaptive motion compared with continuous rotation for both instruments (P < 0.01). However, no differences were found in canal transportation and centering ability in the apical third for both instruments and motions (P > 0.05). CONCLUSIONS: No difference between the devices and kinematics was found in the apical third; TFA performed significantly better in the middle and coronal parts of the root canal. CLINICAL RELEVANCE: The use of NiTi files made by heat-treated alloy and/or adaptive motion could improve the qualities of root canal shaping rather than the use of conventional NiTi instruments and/or continuous rotation in the coronal and middle thirds of the root canals, but not in the apical one. Moreover, these findings encourage the use of adaptive motion with conventional NiTi files to improve centering ability without affecting other preparation qualities of root canals.

Influence of cyclic torsional preloading on cyclic fatigue resistance of nickel - titanium instruments.

AIM: To evaluate the effect of different torsional preloads on cyclic fatigue resistance of endodontic rotary instruments constructed from conventional nickel-titanium (NiTi), M-Wire or CM-Wire. METHODOLOGY: Eighty new size 25, 0.06 taper Mtwo instruments (Sweden & Martina), size 25, 0.06 taper HyFlex CM (Coltene/Whaledent, Inc) and X2 ProTaper Next (Dentsply Maillefer) were used. The Torque and distortion angles at failure of new instruments (n = 10) were measured, and 0% (n = 10), 25%, 50% and 75% (n = 20) of the mean ultimate torsional strength as preloading condition were applied according to ISO 3630-1 for each brand. The twenty files tested for every extent of preload were subjected to 20 or 40 torsional cycles (n = 10). After torsional preloading, the number of cycles to failure was evaluated in a simulated canal with 60° angle of curvature and 5 mm of radius of curvature. Data were analysed using two-way analysis of variance. The fracture surface of each fragment was examined with a scanning electron microscope (SEM). Data were analysed by two-way analyses of variance. RESULTS: Preload repetitions did not influence the cyclic fatigue of the three brands; however, the 25%, 50% and 75% torsional preloading significantly reduced the fatigue resistance of all instruments tested (P < 0.01, P < 0.001 and P < 0.0001, respectively) except for the HyFlex CM preloaded with 25% of the maximum torsional strength (P > 0.05). CONCLUSIONS: Torsional preloads reduced the cyclic fatigue resistance of conventional and treated (M-wire and CM-wire) NiTi rotary instruments except for size 25, 0.06 taper HyFlex CM instruments with a 25% of torsional preloading.

Influence of rotational speed on the cyclic fatigue of Mtwo instruments.

AIM: To evaluate the effect of rotational speed on cyclic fatigue of Mtwo nickel-titanium files. METHODOLOGY: A total of 120 new Mtwo rotary instruments sizes 10, 0.04 taper; 15, 0.05 taper; 20, 0.05 taper; and 25, 0.06 taper were randomly divided into three groups on the basis of the rotational speed used to shape nine standardized simulated canals: group A = 350 rpm; group B = 250 rpm; group C = 150 rpm. Each group consisted of 40 instruments, 10 for every size. The average preparation time (in seconds) and the average correlated numbers of cycles to instrument (NCI) the nine standardized canals were recorded for each file. The resistance to cyclic fatigue was determined by counting numbers of cycles to failure (NCF) with a rotational speed of 300 rpm in a 60° curve with a 5-mm radius. Data were analysed by two-way anova. RESULTS: Preparation time was significantly longer at 150 rpm than at 250 or 350 rpm. The average number of cycles needed for each file to instrument nine standardized canals was significantly higher at 350 and 250 rpm, than at 150 rpm. There were no significant differences in the NCF (P > 0.05) between A, B and C groups for instruments of the same size. CONCLUSIONS: Speed did not affect the cyclic fatigue of Mtwo instruments with the same size and taper. Preparation time was shorter at 350 or 250 rpm rather than at 150 rpm. However, there was no significant difference between 350 and 250 rpm rotational speed, neither in the preparation time of simulated canals nor in the resistance to fatigue fracture.

Measurement of the first ionization potential of astatine by laser ionization spectroscopy.

The radioactive element astatine exists only in trace amounts in nature. Its properties can therefore only be explored by study of the minute quantities of artificially produced isotopes or by performing theoretical calculations. One of the most important properties influencing the chemical behaviour is the energy required to remove one electron from the valence shell, referred to as the ionization potential. Here we use laser spectroscopy to probe the optical spectrum of astatine near the ionization threshold. The observed series of Rydberg states enabled the first determination of the ionization potential of the astatine atom, 9.31751(8) eV. New ab initio calculations are performed to support the experimental result. The measured value serves as a benchmark for quantum chemistry calculations of the properties of astatine as well as for the theoretical prediction of the ionization potential of superheavy element 117, the heaviest homologue of astatine.

Cyclic fatigue resistance of two reciprocating nickel-titanium instruments after immersion in sodium hypochlorite.

AIM: To assess resistance to cyclic fatigue of reciprocating nickel-titanium ( NiTi ) files (Reciproc and WaveOne) after immersion in NaOCl solution over several time periods. METHODOLOGY: A total of 90 new Reciproc R25 and WaveOne Primary were tested. The 45 files of the same brand were randomly assigned to three groups (n = 15) and submitted to the following immersion protocol in 5% NaOCl at 37 °C for 16 mm: no immersion (control), 1 or 5 min dynamically. The dynamic immersion and the following cyclic fatigue tests were performed using the appropriate preset reciprocation modes ('RECIPROC ALL' or 'WAVEONE ALL') in a specially designed endodontic motor. Resistance to cyclic fatigue was determined by recording time to fracture (TtF) in a stainless steel artificial canal with a 60° angle of curvature and 5 mm radius of curvature. The artificial canal was manufactured reproducing the instrument's size and taper. Data were analysed by 2-way analyses of variance. RESULTS: Resistance to cyclic fatigue of the same NiTi file was not significantly affected by immersion in NaOCl . Reciproc R25 was associated with a higher cyclic fatigue resistance in all groups compared to WaveOne Primary (P < 0.0001). CONCLUSIONS: Reciprocating dynamic immersion in NaOCl for 1 or 5 min did not reduce the cyclic fatigue resistance of NiTi files significantly. However, the type of reciprocating instrument influenced cyclic fatigue resistance with Reciproc R25 being more resistant than WaveOne Primary.

Carbon fragmentation measurements and validation of the Geant4 nuclear reaction models for hadrontherapy.

Nuclear fragmentation measurements are necessary when using heavy-ion beams in hadrontherapy to predict the effects of the ion nuclear interactions within the human body. Moreover, they are also fundamental to validate and improve the Monte Carlo codes for their use in planning tumor treatments. Nowadays, a very limited set of carbon fragmentation cross sections are being measured, and in particular, to our knowledge, no double-differential fragmentation cross sections at intermediate energies are available in the literature. In this work, we have measured the double-differential cross sections and the angular distributions of the secondary fragments produced in the (12)C fragmentation at 62 A MeV on a thin carbon target. The experimental data have been used to benchmark the prediction capability of the Geant4 Monte Carlo code at intermediate energies, where it was never tested before. In particular, we have compared the experimental data with the predictions of two Geant4 nuclear reaction models: the Binary Light Ions Cascade and the Quantum Molecular Dynamic. From the comparison, it has been observed that the Binary Light Ions Cascade approximates the angular distributions of the fragment production cross sections better than the Quantum Molecular Dynamic model. However, the discrepancies observed between the experimental data and the Monte Carlo simulations lead to the conclusion that the prediction capability of both models needs to be improved at intermediate energies.

Decontamination efficacy of photon-initiated photoacoustic streaming (PIPS) of irrigants using low-energy laser settings: an ex vivo study.

AIM: To assess ex vivo, the antibacterial effectiveness of photon-initiated photoacoustic streaming (PIPS) of irrigants using an Er:YAG laser equipped with a newly designed, stripped and tapered tip in extracted teeth with infected root canals. METHODOLOGY: One hundred and forty-eight single-rooted extracted teeth were prepared to a size 25, 0.06 taper. The specimens were sterilized, and all teeth except ten (negative control group) were inoculated with Enterococcus faecalis and incubated in a CO(2) chamber at 37 °C for 15 days in Eppendorf tubes filled with trypticase soy broth medium changed every 2 days. Infected teeth were then randomly divided into four test groups (n = 32 for each): pulsed erbium/YAG laser at nonablative settings for 30 s with sterile bi-distilled water (Group A) or 5% sodium hypochlorite (NaOCl) (Group B); without laser-activated sterile bi-distilled water irrigation for 30 s (Group C) or 5% NaOCl irrigation for 30 s (Group D); the positive control group received no treatment in infected teeth (n = 10). Colony-forming units (CFUs) were counted from bacteriologic samples taken before (S1) and after treatment (S2). Data were analysed by Kruskal-Wallis and post hoc Dunn's multiple comparison tests. RESULTS: CFU counts were significantly lower in 5% NaOCl groups with or without laser activation than in sterile bi-distilled water without laser activation group (P < 0.001). Moreover, there was a significant difference between bi-distilled water groups with or without laser activation (P < 0.001). Sodium hypochlorite with laser activation group had the greatest CFU reduction, which was significantly greater than that evident in bi-distilled water groups with or without laser activation (P < 0.001). There were no significant differences between 5% NaOCl groups with or without laser activation (P > 0.05). None of the four groups generated negative samples predictably. CONCLUSIONS: Under the conditions of this ex vivo study, there were no significant differences in bacterial reduction between the laser and NaOCl or NaOCl alone groups. [Correction added after online publication, 18th April 2012: The following statement has been deleted: 'Thus, the use of a laser did not improve microbial killing over and above use of NaOCI alone.'].

Physical performance of the new hybrid PET∕CT Discovery-690.

PURPOSE: The aim of this work was the assessment of the physical performance of the new hybrid PET∕CT system: Discovery-690. METHODS: The Discovery-690 combines a lutetium-yttrium-orthosilicate (LYSO) block detector designed PET tomograph with a 64-slice CT scanner. The system is further characterized by a dedicated powerful computing platform implementing fully 3D-PET iterative reconstruction algorithms. These algorithms can account for time of flight (TOF) information and∕or a 3D model of the PET point spread function (PSF). PET physical performance was measured following NEMA NU-2-2007 procedures. Furthermore, specific tests were used: (i) to measure the energy and timing resolution of the PET system and (ii) to evaluate image quality, by using phantoms representing different clinical conditions (e.g., brain and whole body). Data processing and reconstructions were performed as required by standard procedures. Further reconstructions were carried out to evaluate the performance of the new reconstruction algorithms. In particular, four algorithms were considered for the reconstruction of the PET data: (i) HD = standard configuration, without TOF and PSF, (ii) TOF = HD + TOF, (iii) PSF = HD + PSF, and (iv) TOFPSF = HD + TOF + PSF. RESULTS: The transverse (axial) spatial resolution values were 4.70 (4.74) mm and 5.06 (5.55) mm at 1 cm and 10 cm off axis, respectively. Sensitivity (average between 0 and 10 cm) was 7.5 cps∕kBq. The noise equivalent count rate (NECR) peak was 139.1 kcps at 29.0 kBq∕ml. The scatter fraction at the NECR peak was 37%. The correction accuracy for the dead time losses and random event counts had a maximum absolute error below the NECR peak of 2.09%. The average energy and timing resolution were 12.4% and 544.3 ps, respectively. PET image quality was evaluated with the NEMA IEC Body phantom by using four reconstruction algorithms (HD, TOF, PSF, and TOFPSF), as previously described. The hot contrast (after 3 iterations and for a lesion∕background activity ratio of 4:1) for the spheres of 10, 13, 17, and 22 mm was (HD) 29.8, 45.4, 55.4, and 68.1%; (TOF) 39.9, 53.5, 62.7, and 72.2%; (PSF) 28.3, 47.3, 60.4, and 71.8%; (TOFPSF) 43.8, 62.9, 70.6, and 76.4%. The cold contrast for the spheres of 28 and 37 mm was (HD) 62.4 and 65.2%; (TOF) 77.1 and 81.4%; (PSF) 62.0 and 65.2%; (TOFPSF) 77.3 and 81.6%. Similar hot and cold contrast trends were found during the analyses of other phantoms representing different clinical conditions (brain and whole body). Nevertheless, the authors observed a predominant role of either TOF or PSF, depending on the specific characteristics and dimensions of the phantoms. CONCLUSIONS: Discovery-690 shows very good PET physical performance for all the standard NEMA NU-2-2007 measurements. Furthermore, the new reconstruction algorithms available for PET data (TOF and PSF) allow further improvements of the D-690 image quality performance both qualitatively and quantitatively.

Image-based point spread function implementation in a fully 3D OSEM reconstruction algorithm for PET.

The interest in positron emission tomography (PET) and particularly in hybrid integrated PET/CT systems has significantly increased in the last few years due to the improved quality of the obtained images. Nevertheless, one of the most important limits of the PET imaging technique is still its poor spatial resolution due to several physical factors originating both at the emission (e.g. positron range, photon non-collinearity) and at detection levels (e.g. scatter inside the scintillating crystals, finite dimensions of the crystals and depth of interaction). To improve the spatial resolution of the images, a possible way consists of measuring the point spread function (PSF) of the system and then accounting for it inside the reconstruction algorithm. In this work, the system response of the GE Discovery STE operating in 3D mode has been characterized by acquiring (22)Na point sources in different positions of the scanner field of view. An image-based model of the PSF was then obtained by fitting asymmetric two-dimensional Gaussians on the (22)Na images reconstructed with small pixel sizes. The PSF was then incorporated, at the image level, in a three-dimensional ordered subset maximum likelihood expectation maximization (OS-MLEM) reconstruction algorithm. A qualitative and quantitative validation of the algorithm accounting for the PSF has been performed on phantom and clinical data, showing improved spatial resolution, higher contrast and lower noise compared with the corresponding images obtained using the standard OS-MLEM algorithm.

Isotopic dependence of the nuclear caloric curve.

The A/Z dependence of projectile fragmentation at relativistic energies has been studied with the ALADIN forward spectrometer at SIS. A stable beam of (124)Sn and radioactive beams of (124)La and (107)Sn at 600 MeV per nucleon have been used in order to explore a wide range of isotopic compositions. Chemical freeze-out temperatures are found to be nearly invariant with respect to the A/Z of the produced spectator sources, consistent with predictions for expanded systems. Small Coulomb effects (DeltaT approximately 0.6 MeV) appear for residue production near the onset of multifragmentation.

Number of partitions (gates) needed to obtain motion-free images in a respiratory gated 4D-PET/CT study as a function of the lesion size and motion displacement.

PURPOSE: In this study we evaluate the number of data partitions (gates) needed to sort 4D-PET and 4D-CT data to obtain motion-free images as a function of lesion size and motion displacement. METHODS: Plexiglas spheres of various diameters (8, 10, 15, 20, and 25 mm) were filled with a radioactive solution of water and 18F. A PET/CT study was acquired for each sphere in a rest condition to reconstruct a motion-free image as a reference in terms of radioactivity concentration and spatial distribution. Each sphere was then moved sinusoidally in the superior-inferior direction over different motion displacements (5, 10, 15, 20, and 25 mm) with a periodic motion of 4 s. During motion a 4D-CT scan followed by a 4D-PET scan were acquired. Each set of 4D-CT and 4D-PET data was retrospectively sorted to generate one, two, four, six, eight, ten, and 12 partitions (gates) over the whole cycle of motion. 4D-PET gates were reconstructed by using the corresponding 4D-CT gates for attenuation correction, while PET data acquired, with the sphere in the rest condition were corrected for attenuation by using the corresponding CT image set. For each series of PET images, data analysis was performed by measuring (1) the maximum value of the radioactivity concentration (RACmax) in a VOI encompassing the radioactivity distribution over the volume of motion and (2) the axial-profile of the radioactivity distribution (Ax-p). RESULTS: The results show that radioactivity concentration is strongly underestimated due to motion in most conditions considered in this study. In particular, the underestimation of RACmax for the smallest sphere varied from -10.6% to -66.3% with motion displacements ranging from 5 to 25 mm. For the largest sphere, errors ranged from -1.4% to -26.7%. The 4D-PET/CT methodology allows motion-free or nearly motion-free images to be obtained. It also permits both radioactivity concentration (RACmax) and Ax-p to be recovered with residual differences with respect to the rest condition, depending on the number of partitions used to process the data. Within the limitation of the regular sinusoidal motion, used to simulate a general breathing condition, a scheme describing the number of partitions needed to obtain nearly motion-free images with Ax-p differences of around 10% with respect to the rest data is presented as a function of the lesion size and motion displacement. Such a scheme is proposed to guide the setup of a 4D-PET/CT acquisition and processing protocol for clinical applications. CONCLUSIONS: By using the 4D-PET/CT acquisition technique, it is possible to compensate for the degradation effect of lesion motion on the reconstructed PET images.

Experimental evidence of (2)He decay from (18)Ne excited states.

Two-proton decay from (18)Ne excited states has been studied by complete kinematical reconstruction of the decay products. The (18)Ne nucleus has been produced as a radioactive beam by (20)Ne primary projectile fragmentation at 45 AMeV incident energy on a Be target. The (18)Ne at 33 AMeV incident energy has been excited via Coulomb excitation on a (nat)Pb target. The obtained results unambiguously show that the 6.15 MeV (18)Ne state two-proton decay proceeds through a (2)He diproton resonance (31%) and democratic or virtual sequential decay (69%). The quoted branching ratio has been deduced from relative angle and momentum correlations of the emitted proton pairs.

Wear of nickel-titanium endodontic instruments evaluated by scanning electron microscopy: effect of ion implantation.

The present work analyzes possible increases in resistance to wear of nickel-titanium endodontic instruments that have undergone a process of ionic implantation. ProFile .04 taper #25 instruments were subjected to ionic implantation with bands of nitrogen ions of 250 KeV, currents in the order of 10 microA/cm2, and doses of 2 x 10(17) ions/ cm2. The instruments were used to make preparations in acrylic endodontic training blocks. Scanning electron microscopic investigations showed that after 60 s of work inside the endodontic training blocks nonionic implanted control instruments showed small modifications in their blades, and their tips showed the first signs of wear. After 240 s the control instruments showed consistent signs of wear and frequent changes to their surfaces. After 240 s of use the ionic-implanted instruments did not present any significant changes in the micromorphology of their surfaces. The implanted instruments did not manifest the typical signs of wear and did not show the surface changes that quickly affect the working life of untreated endodontic instruments manufactured from nickel-titanium.