RESUMO
Crystal nucleation shapes the structure and product size distribution of solid-state pharmaceuticals and is seeded by early-stage molecular self-assemblies formed in host solution. Here, molecular clustering of salicylamide in ethyl acetate, methanol, and acetonitrile was investigated using photon correlation spectroscopy. Cluster size steadily increased over 3 days and with concentration across the range from undersaturated to supersaturated solutions. Solute concentration normalized by solubility provided more sensitive characterization of molecular-level conditions than concentration alone. In saturated solution, cluster size is independent of solvent, while at equal supersaturation, solvent-dependent cluster size increases as methanol < acetonitrile < ethyl acetate, commensurate with increasing nucleation propensity. In ethyl acetate, with largest prenucleation clusters, the driving force required for nucleation is lowest, compared to methanol with smallest clusters and highest driving force. To understand solvent-solute effects, we performed IR spectroscopy supported by molecular simulations. We observe solute-solvent interaction weakening in the same order: methanol < acetonitrile < ethyl acetate, quantifying the weaker solvent-solute interactions that permit the formation of larger prenucleation clusters. Our results support the hypothesis that nucleation is easier in weaker solvents because weak solute-solvent interactions favor growth of large clusters, as opposed to relying solely on ease of desolvation.
RESUMO
The early stages of the molecular self-assembly pathway leading to crystal nucleation have a significant influence on the properties and purity of organic materials. This mini review collates the work on organic mesoscale clusters and discusses their importance in nucleation processes, with a particular focus on their critical properties and susceptibility to sample treatment parameters. This is accomplished by a review of detection methods, including dynamic light scattering, nanoparticle tracking analysis, small angle X-ray scattering, and transmission electron microscopy. Considering the challenges associated with crystallisation of flexible and large-molecule active pharmaceutical ingredients, the dynamic nature of mesoscale clusters has the potential to expand the discovery of novel crystal forms. By collating literature on mesoscale clusters for organic molecules, a more comprehensive understanding of their role in nucleation will evolve and can guide further research efforts.
RESUMO
HYPOTHESIS: The stabilization and isolation to dryness of drug nanoparticles has always been a challenge for nano-medicine production. In the past, the use of montmorillonite (MMT) clay carrier particles to adsorb drug nanoparticles and maintain their high surface area to volume ratio after isolation to dryness has proven to be effective. We hypothesise that the distribution of hydrophilic and hydrophobic patches on the clay's surface as well as its porosity/roughness, hinder the agglomeration of the drug nanoparticles to the extent that they retain their high surface area to volume ratio and display fast dissolution profiles. EXPERIMENTS: In this work, the distribution of hydrophobicity and hydrophilicity, and the porosity/roughness, of the surface of selected silica carrier particles were varied and the impact of these variations on drug nanoparticle attachment to the carrier particle and subsequent dissolution profiles was studied. FINDINGS: The fastest dissolution profiles at the highest drug nanoparticle loadings were obtained with a periodic mesoporous organosilane carrier particle which had a homogeneous distribution of hydrophobic and hydrophilic surface properties. Carrier particles with rough/porous surfaces and a combination of hydrophobic and hydrophilic patches resulted in nanocomposite powders with faster dissolution behaviour than carrier particles with predominantly either a hydrophobic or hydrophilic surface, or with non-porous/smoother surfaces.
Assuntos
Portadores de Fármacos , Nanopartículas , Portadores de Fármacos/química , Argila , Solubilidade , Nanopartículas/química , Dióxido de Silício/química , Propriedades de Superfície , Tamanho da PartículaRESUMO
This work presents two new solid forms, a polymorph and a solvate, of the antifungal active pharmaceutical ingredient griseofulvin (GSF). The novel forms were characterized by powder X-ray diffraction, differential scanning calorimetry, and thermogravimetric analysis, and their crystal structures were determined by single-crystal X-ray diffraction. The new polymorphic form (GSF Form VI) was obtained upon drying at room temperature the GSF-acetonitrile solvate. GSF Form VI is a relict structure related to reported solvates of GSF. Thermal stability studies show that Form VI is metastable and monotropically related to the stable GSF Form I. The new GSF-n-butyl acetate solvate was obtained by crystallization from an n-butyl acetate solution. The stoichiometry of the n-butyl acetate solvate is 1:0.5. The solvate loses the solvent from the crystal lattice at a temperature between 363.15 and 374.15 K.
RESUMO
The impact of single or combinations of additives on the generation of nanosuspensions of two poorly water-soluble active pharmaceutical ingredients (APIs), fenofibrate (FF) and dalcetrapib (DCP), and their isolation to the dry state via antisolvent (AS) crystallization followed by freeze-drying was explored in this work. Combinations of polymeric and surfactant additives such as poly(vinyl alcohol) or hydroxypropyl methyl cellulose and sodium docusate were required to stabilize nanoparticles (â¼200-300 nm) of both APIs in suspension before isolation to dryness. For both FF and DCP, multiple additives generated the narrowest, most-stable particle size distribution, with the smallest particles in suspension, compared with using a single additive. An industrially recognized freeze-drying process was used for the isolation of these nanoparticles to dryness. When processed by the liquid AS crystallization followed by freeze-drying in the presence of multiple additives, a purer monomorphic powder for FF resulted than when processed in the absence of any additive or in the presence of a single additive. It was noted that all nanoparticles freeze-dried in the presence of additives had a flat, flaky habit resulting in large surface areas. Agglomeration occurred during freeze-drying, resulting in micron-size particles. However, after freeze-drying, powders produced with single or multiple additives showed similar dissolution profiles, irrespective of aging time before drying, thus attenuating the advantage of multiple additives in terms of size observed before the freeze-drying process.
RESUMO
The nucleation in the p-hydroxybenzoic acid:glutaric acid 1:1 cocrystal (PHBA:GLU) system has been investigated in stoichiometric and non-stoichiometric acetonitrile solutions by induction time experiments. Utilizing the ternary phase diagram, the supersaturated non-stoichiometric solutions were created with compositions along the invariant point boundary lines. In all cases, the PHBA:GLU cocrystal was the nucleating phase, even though the non-stoichiometric solutions were also supersaturated with respect to the pure solid phases. The nucleation of the cocrystal from the mixed solutions is found to be more difficult than the nucleation of the pure compounds from the respective pure solutions, as captured by lower pre-exponential factors (A). However, if the driving force is defined per reactant molecule instead of per heterodimer, the cocrystal nucleation difficulty is close to that of the more difficult-to-nucleate pure compound. The difference in nucleation difficulty of the cocrystal from stoichiometric and non-stoichiometric solutions was captured by differences in the interfacial energy, while the pre-exponential factor remained unchanged. Apart from the pure GLU system, the relation between the experimentally determined pre-exponential factors for the different systems correlates with calculated values using theoretical expressions for volume-diffusion and surface-integration control.
RESUMO
A new polymorph of the drug active pharmaceutical ingredient piracetam (Form VI) has been discovered and characterized by X-ray powder diffraction (PXRD), solid-state Raman, attenuated total reflectance infrared spectroscopy, and differential scanning calorimetry. The PXRD diffractogram of Form VI shows a distinct peak at 24.2° (2θ) that distinguishes it from the previously known polymorphs and solvates. Form VI is metastable with respect to the previously known polymorphs Form II and Form III; in ethanol solution at 288 K, Form VI transforms into Form II within 15 min, while in isopropanol solution Form VI is kinetically stable for at least 6 h. A total of 1200 crystal nucleation induction time experiments of piracetam in ethanol and isopropanol solutions have been conducted, in sets of 40-80 repeat experiments carried out at different temperatures and solute concentrations. Each solution nucleated as a single polymorph, and each set of repeat experiments resulted in different proportions of Form II, Form III, and Form VI, with Form VI dominating at low nucleation temperatures and Form II at higher nucleation temperatures. The induction time data for Form VI at 288 K have been evaluated within the framework of the classical nucleation theory. At equal driving force, nucleation of Form VI is less obstructed in ethanol than in isopropanol, as captured by a lower interfacial energy and higher pre-exponential factor in ethanol. The proportion of Form VI obtained at a comparable driving force increases in the order ethanol < isopropanol.
RESUMO
Crystallization experiments performed with highly supercooled solutions produced highly pure (>99 wt %) and highly crystalline mesocrystals of curcumin from impure solutions (â¼22% of two structurally similar impurities) in one step. These mesocrystals exhibited a crystallographic hierarchy and were composed of perfectly or imperfectly aligned nanometer-thick crystallites. X-ray diffraction and spectroscopic analysis confirmed that the spherulites are a new solid form of curcumin. A theoretical hypothesis based on particle aggregation, double nucleation, and repeated secondary nucleation is proposed to explain the spherulite formation mechanism. The experimental results provide, for the first time, evidence for an organic molecule to naturally form spherulites without the presence of any stabilizing agents. Control experiments performed with highly supercooled pure solutions produced spherulites, confirming that the formation of spherulites is attributed to the high degree of supercooling and not due to the presence of impurities. Likewise, control experiments performed with a lower degree of supercooling produced impure crystals of curcumin via classical molecular addition mechanisms. Collectively, these experimental observations provide, for the first time, evidence for particle-mediated crystallization as an alternate and efficient method to purify organic compounds.
RESUMO
The nucleation behavior of the theophylline-salicylic acid 1:1 (THP:SA) cocrystal in chloroform has been investigated and compared with the corresponding behavior of the pure compounds. Induction times have been determined at different supersaturations at 10 °C under each condition in approximately 40-80 repetition experiments in 20 mL vials. Nucleation times, extracted from the median induction times by accounting for a nucleus growth time, have been used to determine the interfacial energy and the pre-exponential factor within the classical nucleation theory. Results show that the cocrystal at equal driving force has a longer nucleation time, or to reach equal nucleation time, the cocrystal requires a higher driving force. Pure theophylline is easier to nucleate than pure salicylic acid, despite the latter having a smaller molecular size, higher solubility, and is expected to form dimers already in the solution. The cocrystal is found to have an interfacial energy in between the respective values for the pure compounds. However, the higher molecular volume of the cocrystal, taken as the volume of the 1:1 theophylline-salicylic acid assembly, leads to the highest nucleation work, which, together with a low pre-exponential factor, explains why the cocrystal is the most difficult to nucleate. The experimentally extracted pre-exponential factor of the cocrystal is very similar to that of THP, and similar trends are observed from theoretical expressions of volume-diffusion- and surface-integration-controlled nucleation, respectively.
RESUMO
The solubility of the racemic solid phase of ketoprofen (KTP) in methanol, ethanol, isopropanol, butanol, acetonitrile, ethyl acetate, 1,4-dioxane and toluene has been determined between 273 and 303 K by a gravimetric method. FTIR and Raman spectroscopy, SEM and PXRD, have been used to characterise the solid phase. The melting data and heat capacity of solid and melt have been determined by DSC, and used to estimate fusion thermodynamics and the activity of the solid phase as functions of temperature. Empirical and semi-empirical models have been fitted to experimental solubility data. The solution activity coefficients reveal positive deviation from ideality in all solvents except for in dioxane, and very close to ideality in methanol. The solubility is fairly high in the alcohols but decrease with increasing hydrocarbon chain. Generally and due to the presence of the carboxylic acid group, KTP is more readily dissolved in polar protic solvents, followed in order by polar aprotic and non-polar solvents. However, the highest solubility is found in dioxane, classified as a non-polar solvent, but notably though the molecule having two strong hydrogen bond accepting functionalities, and no hydrogen bond donation capability.
Assuntos
Cetoprofeno/química , Solventes/química , Ligação de Hidrogênio , Solubilidade , TermodinâmicaRESUMO
The thermodynamic relationship between FI and FII of ethyl 4-aminobenzoate (benzocaine) has been investigated. Slurry conversion experiments show that the transition temperature below which FI is stable is located between 302 K-303 K (29 °C-30 °C). The polymorphs FI and FII have been characterised by infrared spectroscopy (IR), Raman spectroscopy, transmission powder X-ray diffraction (XRPD) and differential scanning calorimetry (DSC). The isobaric solid state heat capacities have been measured by DSC. The quantitative thermodynamic stability relationship has been determined in a comprehensive thermodynamic analysis of the calorimetric data. The solubility of both polymorphs has been determined in eight pure organic solvents over the temperature range 278 K-323 K by a gravimetric method. The mole fraction solubility of benzocaine decreases in the order: 1,4-dioxane, acetone, ethyl acetate, chloroform, acetonitrile, methanol, n-butanol and toluene. Comparison with the determined activity of solid benzocaine forms shows that negative deviation from Raoult's law ideality is found in dioxane, acetone and ethyl acetate solutions, and positive deviation in solutions of the other investigated solvents.
Assuntos
Benzocaína , Varredura Diferencial de Calorimetria , Cristalização , Pós , Solubilidade , Solventes , Termodinâmica , Difração de Raios XRESUMO
The solid-liquid solubility of two polymorphs of the title compound has been measured in n-propanol over the temperature range (278 K-303 K) by an isothermal, gravimetric method and a low heating rate polythermal method. Due to marked differences in the settling behavior of crystals of the two polymorphs in the investigated solvent, it is found that the low heating rate polythermal method gives the overall best performance for this particular system. Systematic slurry conversion experiments show that FII is the stable polymorph over the investigated temperature range (268 K-308 K). Solubility data for both polymorphs is well correlated, and has been extrapolated to the melting point, by a previously proposed semi-empirical regression model based on solid-phase calorimetric data. The system exhibits a marked positive deviation from Raoult's law, with solute activity coefficients at equilibrium decreasing with increasing temperature.
Assuntos
1-Propanol , Tolbutamida , Varredura Diferencial de Calorimetria , Cristalização , Solubilidade , TermodinâmicaRESUMO
The solubility of butamben has been measured gravimetrically in pure methanol, 1-propanol, 2-propanol, 1-butanol, and toluene over the temperature range 268-298 K. Polymorph transition and melting temperatures, associated enthalpy changes, and the heat capacity of the solid forms and the supercooled melt have been measured by differential scanning calorimetry. Based on extrapolated calorimetric data, the Gibbs energy, enthalpy and entropy of fusion, and the activity of solid butamben (the ideal solubility) have been calculated from below ambient temperature up to the melting point. Activity coefficients of butamben at equilibrium in the different solvents have been estimated from solubility data and the activity of the solid, revealing that all investigated systems exhibit positive deviation from Raoult's law. Solubility data are well correlated by a semiempirical regression model. On a mass basis, the solubility is clearly higher in methanol than in the other solvents, but mole fraction solubilities are very similar across all 5 solvents. The 2 known polymorphs are enantiotropically related, and the transition point is located at 283 K. Polymorph interconversions occur within 0.3 K of the transition point even in the solid state, and the 2 forms exhibit strong similarities in investigated properties.
Assuntos
Benzocaína/análogos & derivados , Solventes/química , 2-Propanol/química , Benzocaína/química , Varredura Diferencial de Calorimetria/métodos , Cristalização/métodos , Temperatura Alta , Metanol/química , Solubilidade , Temperatura , Termodinâmica , Temperatura de Transição , Difração de Raios X/métodosRESUMO
Molecular clustering and solvent-solute interactions in isopropanol solutions of fenoxycarb have been thoroughly and systematically investigated by dynamic light scattering, small-angle X-ray scattering, and nanoparticle tracking, supported by infrared spectroscopy and molecular dynamics simulations. The existence of molecular aggregates, clusters, ranging in size up to almost a micrometre is clearly recorded at undersaturated as well as supersaturated conditions by all three analysis techniques. The results systematically reveal that the cluster size increases with solute concentration and time at stagnant conditions. For most concentrations the time scale of cluster growth is of the order of days. In undersaturated solutions the size appears to eventually reach a maximum value, higher the higher the concentration. Below a certain concentration threshold clusters are significantly smaller. Clusters are found to be smaller in solutions pre-heated at a higher temperature, which offers a possible explanation for the so-called "history of solution" effect. The cluster distribution is influenced by filtration through membranes with a pore size of 0.1 µm, offering an alternative explanation for the "foreign particle-catalysed nucleation" effect. At moderate concentrations larger clusters appear to be sheared into smaller ones, but the original size distribution is rapidly re-established. At higher concentrations, although still well below solubility, the cluster size as well as solute concentration are strongly affected, suggesting that larger clusters contain at least a core of more organized molecules not able to pass through the filter.
RESUMO
The influence of the solvent in nucleation of tolbutamide, a medium-sized, flexible and polymorphic organic molecule, has been explored by measuring nucleation induction times, estimating solvent-solute interaction enthalpies using molecular modelling and calorimetric data, probing interactions and clustering with spectroscopy, and modelling solvent-dependence of molecular conformation in solution. The nucleation driving force required to reach the same induction time is strongly solvent-dependent, increasing in the order: acetonitrile
RESUMO
The development of solid dosage forms and manufacturing processes are governed by complex physical properties of the powder and the type of pharmaceutical unit operation the manufacturing processes employs. Suitable powder flow properties and compactability are crucial bulk level properties for tablet manufacturing by direct compression. It is also generally agreed that small scale powder flow measurements can be useful to predict large scale production failure. In this study, predictive multilinear regression models were effectively developed from critical material properties to estimate static powder flow parameters from particle size distribution data for a single component and for binary systems. A multilinear regression model, which was successfully developed for ibuprofen, also efficiently predicted the powder flow properties for a range of batches of two other active pharmaceutical ingredients processed by the same manufacturing route. The particle size distribution also affected the compactability of ibuprofen, and the scope of this work will be extended to the development of predictive multivariate models for compactability, in a similar manner to the approach successfully applied to flow properties.
Assuntos
Excipientes/análise , Pós/análise , Tecnologia Farmacêutica , Química Farmacêutica , Tamanho da Partícula , ComprimidosRESUMO
Nanoparticles of poorly water-soluble drugs were prepared in suspension via antisolvent precipitation in order to improve their dissolution behaviour. Insoluble, surface-functionalized, micron-range, clay carrier particles were employed for the dual purpose of stabilizing the nanoparticles in suspended state, and facilitating their unhindered isolation to solid state; often a challenging step in nanoparticle production. The carrier particles, which were functionalized with an optimal level of cationic polymer (protamine), attracted negatively-charged nanoparticles to their surface as a uniform and segregated nanoparticle layer, at drug loadings up to 9% w/w. By using carrier particles to stabilise the nanoparticles on their surface, the traditionally used solubilised nanosuspension stabilisers could be eliminated, thus avoiding time-consuming stabiliser screening tests. The carrier particle system facilitated stabilisation of nanoparticles in suspension, isolation of nanoparticles to the solid state via filtration, and preservation of fast nanoparticle-induced dissolution rates of the dried nanoparticle-carrier composites, indicating preservation of their high surface area during drying. The process was validated with two poorly water-soluble BCS Class II drugs, fenofibrate and mefenamic acid, both of which demonstrated negative surface charge in aqueous suspension.
Assuntos
Portadores de Fármacos/química , Nanopartículas/química , Bentonita/química , Composição de Medicamentos , Estabilidade de Medicamentos , Fenofibrato/química , Ácido Mefenâmico/química , Tamanho da Partícula , Difração de Pó , Protaminas/química , Solubilidade , Difração de Raios XRESUMO
Melting temperatures and enthalpies of fusion have been determined by differential scanning calorimetry (DSC) for 2 polymorphs of the drug tolbutamide: FI(H) and FV. Heat capacities have been determined by temperature-modulated DSC for 4 polymorphs: FI(L), FI(H), FII, FV, and for the supercooled melt. The enthalpy of fusion of FII at its melting point has been estimated from the enthalpy of transition of FII into FI(H) through a thermodynamic cycle. Calorimetric data have been used to derive a quantitative polymorphic stability relationship between these 4 polymorphs, showing that FII is the stable polymorph below approximately 333 K, above which temperature FI(H) is the stable form up to its melting point. The relative stability of FV is well below the other polymorphs. The previously reported kinetic reversibility of the transformation between FI(L) and FI(H) has been verified using in situ Raman spectroscopy. The solid-liquid solubility of FII has been gravimetrically determined in 5 pure organic solvents (methanol, 1-propanol, ethyl acetate, acetonitrile, and toluene) over the temperature range 278 to 323 K. The ideal solubility has been estimated from calorimetric data, and solution activity coefficients at saturation in the 5 solvents determined. All solutions show positive deviation from Raoult's law, and all van't Hoff plots of solubility data are nonlinear. The solubility in toluene is well below that observed in the other investigated solvents. Solubility data have been correlated and extrapolated to the melting point using a semiempirical regression model.