Are volatile methylsiloxanes in downcycled tire microplastics? Levels and human exposure estimation in synthetic turf football fields.

Downcycled rubber, derived from end-of-life tires (ELTs), is frequently applied as crumb rubber (CR) as infill of synthetic turf in sports facilities. This practice has been questioned in recent years as numerous studies have reported the presence of potentially hazardous chemicals in this material. CR particles fall into the category of microplastics (MPs), making them possible vectors for emerging micropollutants. A preliminary study where volatile methylsiloxanes (VMSs) were found in CR originated the hypothesis that VMSs are present in this material worldwide. Consequently, the present work evaluates for the first time the levels and trends of seven VMSs in CR from synthetic turf football fields, while attempting to identify the main sources and impacts of these chemicals. A total of 135 CR samples and 12 other of alternative materials were analyzed, employing an ultrasound-assisted dispersive solid-phase extraction followed by gas chromatography-mass spectrometry (GC-MS), and the presence of VMSs was confirmed in all samples, in total concentrations ranging from 1.60 to 5089 ng.g-1. The levels were higher in commercial CR (before field application), a reflection of the use of VMS-containing additives in tire production and/or the degradation of silicone polymers employed in vehicles. The VMSs generally decreased over time on the turf, as expected given their volatile nature and the wearing of the material. Finally, the human exposure doses to VMSs in CR (by dermal absorption and ingestion) for people in contact with synthetic turf in football fields were negligible (maximum total exposure of 20.5 ng.kgBW-1.year-1) in comparison with the European Chemicals Agency (ECHA) reference doses: 1.35 × 109 ng.kgBW-1.year-1 for D4 and 1.83 × 109 ng.kgBW-1.year-1 for D5. Nevertheless, more knowledge on exposure through inhalation and the combined effects of all substances is necessary to provide further corroboration. This work proved the presence of VMSs in CR from ELTs, another family of chemical of concern to take into account when studying MPs as vectors of other contaminants.

Helping WWTP managers to address the volatile methylsiloxanes issue-Behaviour and complete mass balance in a conventional plant.

Volatile methylsiloxanes (VMSs) are a group of additives employed in different consumer products that can affect the quality of the biogas produced in wastewater treatment plants (WWTPs). The main objective of this study is to understand the fate of different VMSs along the treatment process of a WWTP located in Aveiro (Portugal). Thus, wastewater, sludge, biogas, and air were sampled in different units for two weeks. Subsequently, these samples were extracted and analyzed by different environment-friendly protocols to obtain their VMS (L3-L5, D3-D6) concentrations and profiles. Finally, considering the different matrix flows at every sampling moment, the mass distribution of VMSs within the plant was estimated. The levels of ∑VMSs were similar to those showed in the literature (0.1-50 µg/L in entry wastewater and 1-100 µg/g dw in primary sludge). However, the entry wastewater profile showed higher variability in D3 concentrations (from non detected to 49 µg/L) than found in previous studies (0.10-1.00 µg/L), likely caused by isolated releases of this compound that could be related to industrial sources. Outdoor air samples showed a prevalence of D5, while indoor air locations were characterized by a predominance of D3 and D4. Differences in sources and the presence of an indoor air filtration system may explain this divergence. Biogas was characterized by ∑VMSs concentrations (8.00 ± 0.22 mg/m3) above the limits recommended by some engine manufacturers and mainly composed of D5 (89%). Overall, 81% of the total incoming mass of VMSs is reduced along the WWTP, being the primary decanter and the secondary treatment responsible for the highest decrease (30.6% and 29.4% of the initial mass, respectively). This reduction, however, is congener dependant. The present study demonstrates the importance of extending sampling periods and matrices (i.e., sludge and air) to improve sample representativity, time-sensitivity, and the accuracy of mass balance exercises.

Per- and Poly-Fluoroalkyl Substances in Portuguese Rivers: Spatial-Temporal Monitoring.

Eighteen per-and polyfluoroalkyl substances (PFASs) were investigated in surface waters of four river basins in Portugal (Ave, Leça, Antuã, and Cértima) during the dry and wet seasons. All sampling sites showed contamination in at least one of the seasons. In the dry season, perfluorooctanoate acid (PFOA) and perfluoro-octane sulfonate (PFOS), were the most frequent PFASs, while during the wet season these were PFOA and perfluobutane-sulfonic acid (PFBS). Compounds detected at higher concentrations were PFOS (22.6 ng L-1) and perfluoro-butanoic acid (PFBA) (22.6 ng L-1) in the dry and wet seasons, respectively. Moreover, the prospective environmental risks of PFASs, detected at higher concentrations, were evaluated based on the Risk Quotient (RQ) classification, which comprises acute and chronic toxicity. The results show that the RQ values of eight out of the nine PFASs were below 0.01, indicating low risk to organisms at different trophic levels in the four rivers in both seasons, wet and dry. Nevertheless, in the specific case of perfluoro-tetradecanoic acid (PFTeA), the RQ values calculated exceeded 1 for fish (96 h) and daphnids (48 h), indicating a high risk for these organisms. Furthermore, the RQ values were higher than 0.1, indicating a medium risk for fish, daphnids and green algae (96 h).

Seasonal occurrence, concentrations, and occupational exposure to VMSs in different environments of a WWTP.

In the present study, indoor and outdoor environments of a wastewater treatment plant (WWTP) were monitored by passive air samplers to assess the presence and seasonal trends of three linear (L3-L5) and four cyclic (D3-D6) volatile methylsiloxanes (VMSs). Furthermore, passive sampling rates (PSRs) were estimated from literature values to calculate VMSs air concentrations and occupational exposure to potentially toxic (D4-D6) congeners. Results showed a seasonal pattern of VMSs in outdoor locations (especially in the aeration tank and preliminary treatment), being the highest levels of total VMSs reached in Summer and the lowest in Spring, caused by the confluence of changing weather conditions and VMSs consumption patterns. This seasonality was not found in indoor sites. The congener profiles of VMSs were consistent throughout the year, showing a prevalence of D5 outdoors, and of D3 and D4 in strictly indoor environments. Different sources of VMSs, together with an air filtering system installed in the sampled buildings explain these differences. Estimated PSRs yielded lower values indoors (0.16-0.21 m3/day) than outdoors (0.32-0.49 m3/day), due to different wind speeds. Overall, outdoor locations showed higher VMSs concentrations in air than indoors. However, the values detected in both environments (∑VMSs between 8.00 and 2000 ng/m3) were within the ranges described in the literature for these locations. The occupational exposure to D4-D6 estimated for three different activities in the WWTP showed the highest values for Maintenance Technicians (8010 ± 722 ng/(kg·year)) and the lowest for Laboratory Technicians (5410 ± 874 ng/(kg·year)), in direct correlation with the higher amount of time spent outdoors by the former. In any case, the exposure was below the inhalation threshold of 150 µg/(kg·day) proposed as safe by other authors.

Microalgal Cultures for the Bioremediation of Urban Wastewaters in the Presence of Siloxanes.

Microalgae are widely used in the bioremediation of wastewaters due to their efficient removal of pollutants such as nitrogen, phosphorus, and contaminants of emerging concern (CECs). Siloxanes are CECs that reach wastewater treatment plants (WWTPs), leading to the production of biogas enriched with these compounds, associated with the breakdown of cogeneration equipment. The biological removal of siloxanes from wastewaters could be a sustainable alternative to the costly existing technologies, but no investigation has been performed using microalgal cultures for this purpose. This study evaluated the ability of Chlorella vulgaris to bioremediate primary (PE) and secondary (SE) urban effluents and remove volatile methylsiloxanes (VMSs). C. vulgaris grew successfully in both effluents, and approximately 86% of nitrogen and 80% of phosphorus were efficiently removed from the PE, while 52% of nitrogen and 87% of phosphorus were removed from the SE, and the presence of VMSs does not seem to have a negative influence on nutrient removal. Three out of the seven of the analysed VMSs were detected in the microalgal biomass at the end of the PE assay. However, dodecamethylcyclohexasiloxane (D6) was the one that accumulated to a greater extent, since 48% of the initial mass of D6 was detected in the biomass samples. D6 is one of the most lipophilic VMSs, which might contribute to the higher adsorption onto the surface of microalgae. Overall, the results indicate C. vulgaris' potential to remove specific VMSs from effluents.

Presence of metals and metalloids in crumb rubber used as infill of worldwide synthetic turf pitches: Exposure and risk assessment.

Crumb rubber derived from end-of-life tires (ELTs) is frequently used as infill of synthetic turf pitches, promoting circular economy. Although important to reduce the accumulation of waste, the use of recycled ELTs can be a problem to human health and the environment, both by direct contact during pitch use and by the release of these elements to the surroundings, mostly via volatilization and leaching. The present study aimed to evaluate the distribution of metals in ELT-derived crumb rubber collected in artificial turf worldwide and assess possible trends by country, pitch age and type (indoor vs. outdoor). The concentration ranges observed are very wide, especially in outdoor fields and for the most abundant metals, namely Zn (2989-5246 mg/kg), Fe (196-5194 mg/kg), Mg (188-1795 mg/kg) and Al (159-1882 mg/kg). For Zn, the levels were mostly above the safe limits set in European directives for relatable matrices (soils and toy materials), and the same happened for Pb, a much more toxic metal at lower concentrations. A multi-pathway human exposure study was also performed, and the risk assessment shows non-carcinogenic and carcinogenic risks from accidental crumb rubber ingestion (with Cr and Pb as major contributors) above the acceptable values for all the receptors except adult bystanders, with a higher significance to younger individuals. These results bring a different perspective regarding most of the studies reporting low risks related with exposure to metals in crumb rubber.

Gone with the flow - Assessment of personal care products in Portuguese rivers.

Although there are several works in the literature that study the presence of pharmaceuticals and personal care products (PPCPs) in surface waters, the vast majority focus their attention on pharmaceuticals and little information is found about personal care products (PCPs). Therefore, this study focused, for the first time, on the monitoring of five classes of PCPs - fragrance allergens, synthetic musks, phthalates, antioxidants, and ultraviolet-filters - in the surface water of four small-size typically pollution-impacted Portuguese rivers (Ave, Leça, Antuã and Cértima). A solid-phase microextraction (SPME) followed by gas chromatography - tandem mass spectrometry (GC-MS/MS) protocol was employed to analyse surface water samples collected in two seasonal campaigns - summer and winter (34 samples per season). A total of 22 out of 37 target PCPs were detected concomitantly at least once in one sampling point, being the most frequently detected α-isomethyl ionone, galaxolide, tonalide and cashmeran. The highest concentrations were confirmed for diethylhexyl phthalate (610.6 ng L-1), galaxolide (379.2 ng L-1), geraniol (290.9 ng L-1), linalool (271.2 ng L-1), benzophenone-3 (254.1 ng L-1) and citronellol (200.2 ng L-1). Leça River, traversing the more densely urban and industrialized area, had the highest levels of contaminants, which were also found in the sampling points located downstream of wastewater treatment plants discharge points. In general, higher levels were detected in summer, when the river flows are lower. Hazard quotients were determined and octocrylene, tonalide, and geraniol presented values above 1 in some sampling sites, which may indicate an ecotoxicological risk to the aquatic environment. The results presented suggest that these three PCPs should be included as priority pollutants in environmental monitoring schemes in surface waters, due to their high detection, persistence, and potential adverse effects.

Global evaluation of the chemical hazard of recycled tire crumb rubber employed on worldwide synthetic turf football pitches.

Social and environmental concern about the use of crumb rubber from end-of-life car tires in the construction of different sport and recreational facilities is increasing due to the presence of hazardous compounds. The aim of this research was the assessment of 42 organic chemicals, including polycyclic aromatic hydrocarbons (PAHs), phthalates, adipates, antioxidants and vulcanisation agents in a large number of infill samples (91) from synthetic turf football pitches of diverse characteristics and geographical origin. Samples were taken worldwide, in 17 countries on 4 continents, to show the global dimension of this problem. Ultrasound assisted extraction was employed to extract the target compounds, followed by gas chromatography coupled to tandem-mass spectrometry (UAE-GC-MS/MS). Seventy-eight crumb rubber samples as well as thirteen samples of alternatives materials, such as cork granulates, thermoplastic elastomers and coconut fibre, were analyzed. The results highlight the presence of all target PAH in most rubber samples at concentrations up to µg g-1, including the eight ECHA (European Chemicals Agency) PAHs considered as carcinogenic, and anthracene (ANC), pyrene (PYR) and benzo[ghi]perylene (B[ghi]P), catalogued as substances of very high concern (SVHC). Endocrine disruptors such as some plasticizers (mainly phthalates), and other compounds like benzothiazole (BTZ) and 2-mercaptobenzothiazole (MBTZ) were found reaching the mg g-1 level. This confirms the presence of the hazardous substances in the recycled crumb rubber samples collected all around the world. Three crumb rubber samples exceeded the limit of 20 µg g-1 for the sum of the eight ECHA PAHs. Regarding the chemical composition of other infill alternatives, cork appears to be adequate, while the thermoplastic elastomers contained high levels of some plasticizers. In addition, the plastic infill as well as the crumb rubber both are microplastics. Microplastics are considered contaminants of emerging concern since they do not biodegrade and remain in the environment for a long time.

Artificial turf and crumb rubber infill: An international policy review concerning the current state of regulations.

Background: Although artificial turf fields are utilized widely around the world, sufficient research has not yet been conducted to assess the potential human and environmental health risks posed by the chemicals contained in the fields' fibers, backing, and often-used crumb rubber infill. Consequently, there is wide variation in governmental policies. Objective: Review the notable policies concerning artificial turf and crumb rubber infill in the European Union, United Kingdom, United States of America, Canada, China, Qatar, and the Global Stockholm Convention of the United Nations. Methods: Information was collected that included published papers, technical and policy reports, and grey literature. These were then analyzed by a collaborative group familiar with the environmental policies in their respective countries to extract the pertinent legislative or regulatory information. The group members were primarily identified through their involvement in publications pertinent to artificial turf and crumb rubber infill health research and included environmental health professors, active researchers, and governmental agency officials. Most information on direct policies was taken directly from reports provided to the public by various governmental agencies responsible for their countries' regulations, often available within the respective agency's online archives. Results: There are significant differences in the regulatory approaches adopted by the investigated countries with regards to artificial turf and its crumb rubber infill. Some regions, such as the European Union, have taken substantial steps to limit the fields' chemical components to which the public and environment are exposed. Other regions and countries have done far less to address the issue. Most policies relate directly to (i) the fields themselves, (ii) the microplastic components of crumb rubber infill, or (iii) the concentrations of harmful polycyclic aromatic hydrocarbons (PAHs), perfluoroalkyl and polyfluoroalkyl substances (PFAS), and heavy metals. Conclusion: While nearly every country acknowledges the potential health risks posed by heavy metals, microplastics, PAHs, and PFAS chemicals, very few have actually implemented artificial turf and crumb rubber infill regulations and/or established adequate surveillance measures to protect those regularly exposed to the fields.

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water.

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.

Headspace solid-phase microextraction based on the metal-organic framework CIM-80(Al) coating to determine volatile methylsiloxanes and musk fragrances in water samples using gas chromatography and mass spectrometry.

A headspace solid-phase microextraction (HS-SPME) method was developed using the metal-organic framework (MOF) CIM-80(Al) as extraction phase and in combination with gas chromatography-mass spectrometry (GC-MS) for the simultaneous determination of 6 methylsiloxanes and 7 musk fragrances in different environmental waters. The chromatographic separation was optimized in different GC instruments equipped with different detectors, allowing the correct separation and identification of the compounds. The HS-SPME method was optimized using a Box-Behnken experimental design, while the validation was carried out together with the most suitable commercial fiber (divinylbenzene/polydimethylsiloxane) for comparison purposes. The MOF-based coating was particularly efficient for the determination of volatile methylsiloxanes, showing moderately lower limits of detection (of 0.2 and 0.5 µg L-1versus 0.6 µg L-1 for cyclic methylsiloxanes) and slightly better precision (relative standard deviation values lower than 17% versus 22%) than the commercial coating, while avoiding the cross-contamination issues associated to the polymeric composition of commercial fibers. The method was applied for the analysis of seawater and wastewater samples, allowing the quantification of several analytes and the assessment of matrix effects. The proposed HS-SPME method using the CIM-80(Al) fiber constitutes a more environmentally friendly, simpler, and efficient strategy in comparison with other sample preparation methods using different extraction techniques, while the use of a MOF as fiber sorbent constitutes a potential alternative to exploit the features of SPME for the challenging environmental monitoring of these compounds.

A review of potentially harmful chemicals in crumb rubber used in synthetic football pitches.

Recycling end-of-life tires (ELTs) reduces waste and provides a low-cost source of energy and materials such as crumb rubber, used as infill in artificial turf football pitches. However, some concerns were raised and remain about its safety. The potentially toxic human exposure to chemicals such as polycyclic aromatic hydrocarbons (PAHs), metals and others (volatile organic compounds (VOCs), plasticizers, antioxidants and additives) existing in ELTs (and in the resulting crumb rubber) is being studied, with no definitive conclusions. The literature existing so far suggests the possibility of their release from synthetic turf infill into the environment as water leachates and to the air surrounding the pitches, but there is the need of further research, also to assess the contribution of other materials present in synthetic turf. The database available comprised crumb rubber infill studies from pitches in 6 countries (USA, Norway, Netherlands, Portugal, Italy, Spain) and revealed a myriad of hazardous chemicals, with benzo[a]pyrene (n.d.-4.31 ± 3.95 mg/kg) and zinc (n.d.-14150 ± 1344 mg/kg) often exceeding the established limits. A dependence on indoor/outdoor conditions and the age of the source material was evaluated, often showing significative differences. From this standpoint, this review is intended to add knowledge about the presence of contaminants in this recycled material, aiming to ensure the safety of end-users and the environment.

Evaluation of chemicals of environmental concern in crumb rubber and water leachates from several types of synthetic turf football pitches.

Nowadays concern exists about the safety for both football players and the environment of recycled tire rubber used as infill in synthetic turf football pitches. In this study 40 target compounds, including polycyclic aromatic hydrocarbons (PAHs), plasticizers, antioxidants and vulcanization agents were determined in 50 synthetic football pitches of diverse characteristics to estimate environmental risks. This is the first study of crumb rubber sport facilities in Portugal. Analyses were performed by ultrasound-assisted extraction followed by gas chromatography-tandem mass spectrometry (UAE-GC-MS/MS). To evaluate the transfer of the target chemicals from the crumb rubber to the runoff water, water leachates collected from several football pitches were analyzed by solid-phase microextraction (SPME-GC-MS/MS). In addition, lab-scale runoff simulation experiments were performed to assess whether a persistent inflow of the target compounds from the football pitches into the runoff water wcould exist. Results revealed the presence of most of the target PAHs in crumb rubber at total concentrations up to 57 µg g-1, next to a high number of plasticizers and vulcanization agents. Runoff water collected from the football pitches contained up to 13 PAHs as well as other chemicals of environmental concern. In addition, continuous leaching of chemicals from the crumb rubber to the surrounding water was demonstrated. The transfer of target chemicals into the runoff water poses a potential risk for the aquatic environment.

Population exposure to particulate-matter and related mortality due to the Portuguese wildfires in October 2017 driven by storm Ophelia.

In October 2017, hundreds of wildfires ravaged the forests of the north and centre of Portugal. The fires were fanned by strong winds as tropical storm Ophelia swept the Iberian coast, dragging up smoke (together with Saharan dust from north-western Africa) into higher western European latitudes. Here we analyse the long-range transport of particulate matter (PM10) and study associations between PM10 and short-term mortality in the Portuguese population exposed to PM10 due to the October 2017 wildfires, the worst fire sequence in the country over the last decades. We analysed space- and ground-level observations to track the smoke plume and dust trajectory over Portugal and Europe, and to access PM10 concentrations during the wildfires. The effects of PM10 on mortality were evaluated using satellite data for exposure and Poisson regression models. The smoke plume covered most western European countries (including Spain, France, Belgium and the Netherlands), and reached the United Kingdom, where the population was exposed in average to an additional PM10 level of 11.7 µg/m3 during seven smoky days (three with dust) in relation to the reference days (days without smoke or dust), revealing the impact of the wildfires on distant populations. In Portugal, the population was exposed in average to additional PM10 levels that varied from 16.2 to 120.6 µg/m3 in smoky days with dust and from 6.1 to 20.9 µg/m3 in dust-free smoky days. Results suggest that PM10 had a significant effect on the same day natural and cardiorespiratory mortalities during the month of October 2017. For every additional 10 µg/m3 of PM10, there was a 0.89% (95% confidence interval, CI, 0-1.77%) increase in the number of natural deaths and a 2.34% (95% CI, 0.99-3.66%) increase in the number of cardiorespiratory-related deaths. With rising temperatures and a higher frequency of storms due to climate change, PM from Iberian wildfires together with NW African dust will tend to be more often transported into Northern European countries, which may carry health threats to areas far from the ignition sites.

Distribution of micropollutants in estuarine and sea water along the Portuguese coast.

This work provides the first spatial distribution report of micropollutants (MPs) in the entire Portuguese coast, comprising the ocean shore (sea water, SW) and whenever possible the nearest river discharging on it (estuarine water, EW). This surface water monitoring programme aimed to assess the spatial distribution of 37 MPs with a wide chemical nature, including some substances prioritized by the European Union Directive 39/2013/EU and contaminants of emerging concern targeted in the Watch List of Decisions 495/2015/EU and 840/2018/EU. The risk quotients were estimated in each sampling point for the detected MPs. High concentrations of diclofenac, tramadol and carbamazepine were determined, the latter with medium to high risk for algae. Some pharmaceuticals and perfluorooctanesulfonic acid (PFOS) were broadly distributed, maybe due to the direct discharge into the sea. Atrazine and alachlor were found in the majority of the samples, with alachlor levels often considered as medium to high risk.

An innovative approach for the simultaneous quantitative screening of organic plastic additives in complex matrices in marine coastal areas.

Aiming the simultaneous determination of widely used organic plastic additives in complex marine matrices, this work proposes a fast and "green" analytical protocol based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) technology. The validation of this innovative method on real matrices (i.e., sediments, mussel, fish, and Posidonia oceanica) indicated a general good performance in all of them for phthalate esters (PAEs), with low blank levels and average method recoveries varying from 54 ± 11 to 71 ± 12%. The best method performance for organophosphate ester (OPE) flame retardants and plasticizers was in biotic matrices (recoveries 52 ± 31 to 86 ± 38%). This application represents an innovative QuEChERS sequence of two dispersive solid-phase extraction (SPE) steps enabling this approach for the determination of important families of organic plastic additives in the marine environment. Indeed, our method allowed the fast screening and simultaneous determination of OPE and PAEs in various sites and matrices subject to different anthropogenic pressure in coastal NW Mediterranean Sea for the first time. ∑7PAE and ∑9OPE concentrations of 19-83 and 27-116 ng g-1 dw (fish), of 80-714 and 42-71 ng g-1 dw (mussels), of 192-908 and 47-151 ng g-1 dw (Posidonia oceanica), and of 11-328 and 4-10 ng g-1 dw (sediment) were measured, respectively. Our approach was sensible enough as to detect differences in the (bio)accumulation patterns of the target compounds in various species and/or sites. This application opens new perspectives for environmentally friendly marine environment monitoring and screening campaigns for organic plastic additives. Graphical abstract.

Climate drivers of the 2017 devastating fires in Portugal.

A record 500,000 hectares burned in Portugal during the extreme wildfire season of 2017, with more than 120 human lives lost. Here we analyse the climatic factors responsible for the burned area (BA) from June to October series in Portugal for the period 1980-2017. Superposed onto a substantially stationary trend on BA data, strong oscillations on shorter time scales were detected. Here we show that they are significantly affected by the compound effect of summer (June-July-August) drought and high temperature conditions during the fire season. Drought conditions were calculated using the Standardized Precipitation Evapotranspiration Index (SPEI), the Standardized Precipitation Index (SPI) and the Standardized Soil Moisture Index (SSI). Then the extent to which the burned area has diverged from climate-expected trends was assessed. Our results indicate that in the absence of other drivers, climate change would have led to higher BA values. In addition, the 2017 extreme fire season is well captured with the model forced with climate drivers only, suggesting that the extreme fire season of 2017 could be a prelude to future conditions and likewise events. Indeed, the expected further increase of drought and high temperature conditions in forthcoming decades, point at a potential increase of fire risk in this region. The climate-fire model developed in this study could be useful to develop more skilled seasonal predictions capable of anticipating potentially hazardous conditions.

Determination of multiclass personal care products in continental waters by solid-phase microextraction followed by gas chromatography-tandem mass spectrometry.

A methodology based on solid-phase microextraction (SPME) followed by gas chromatography-tandem mass spectrometry (GC-MS/MS) was developed for the simultaneous analysis of different families of personal care products (PCPs) including fragrance allergens, synthetic musks, phthalates, antioxidants and UV filters in continental waters. The main parameters affecting SPME procedure were optimized by an ANOVA study. The final selected conditions comprised the use of 10 mL of sample with 20% (w/v) of sodium chloride (NaCl), polydimtehylsiloxane/divinylbenzene (PDMS/DVB) fiber and 20 min of extraction time at 100 °C in the head-space mode. Good linearity (R2>0.9925), quantitative recoveries (>79%), and precision (RSD < 15%) were achieved for all compounds under the optimal conditions. Limits of quantification (LOQs) at the sub and low ng L-1 were obtained. The validated methodology was successfully applied to the analysis of river water samples from the North Portuguese coast allowing the determination of five different families of PCPs, including a total of 43 compounds in a single chromatographic run within 23 min.