Simultaneous determination of bromoxynil and MCPA in commercial samples and raw materials using reversed phase high performance liquid chromatography.

This study encompasses a quick, efficient, repeatable and reproducible analytical method for simultaneous determination of Bromoxynil (3, 5-Dibromo-4-hydroxybenzonitrile) and MCPA (2-methyl-4-chlorophenoxyacetic acid) using RP-HPLC with UV-Detector. Bromoxynil + MCPA is one of the most selective post emergent herbicide formulations for the control of important broad leaf weeds infesting small grains (wheat, barley, oats, rye), conservation reserve program areas and grass grown for seed. Optimum weed control is achieved when Bromoxynil + MCPA is applied to actively growing weed seedlings. So, a simple, repeatable, reproducible and efficient simultaneous analytical method was developed for Bromoxynil + MCPA. The developed method was applied for the detection and quantitation of these pesticides in formulations and raw materials with excellent recoveries. It was validated according to ICH Guidelines with excellent linearity R2 = 0.992 for Bromoxynil and 0.998 for MCPA. For Bromoxynil, LOD = 1.57 mg/L and LOQ = 5.22 mg/L while for MCPA the LOD = 1.08 mg/L and LOQ = 3.62 mg/L was found. The proposed method has shown high precision (RSD %) 0.06% and 0.11% for Bromoxynil and MCPA respectively while the trueness has been calculated in terms of recovery percentage obtained as "mean value of Bromoxynil 99.53% and MCPA 100.10%" which is excellent under optimized conditions. For repeatability and reproducibility, five replicate readings of standard and sample were taken and had found within acceptable limits of relative standard deviation (RSD ≤ ± 2%). Finally, the robustness of the developed method was determined by changing flow rate and mobile phase ratios that has found within the permissible limits (% RSD NMT 1.5). So, the proposed analytical method has found to be more precise, valid and accurate at commercial scale.

A novel spectrophotometric determination of caroverine in pharmaceutical formulations via derivatization with Folin-ciocalteu Phenol reagent.

In this study we have reported a new, fast and extraction free spectrophotometric procedure for the assessment of caroverine in pharmaceutical raw and tablet dosage forms. In the reported visible spectrophotometric procedure tungstate in Folin-Ciocalteu phenol reagent is reduced in alkaline medium and produces the blue colored chromogen that shows Λmax at 740nm with the calibration range of 2-28µg/ml. The LOD and LOQ values are 1.15 and 3.81µg/ml respectively. The newly developed analytical procedure is used to determine caroverine in raw material of and commercial tablets dosage forms. The spectrophotometric method represented in this study is simple, rapid and extraction free. It may easily be utilized for the determination of caroverine in pharmaceutical laboratories for quality control and stability studies purpose.

Spectrophotometric determination of citalopram hydrobromide in tablet dosage form using chloranil.

A fast, sensitive and extraction free spectrophotometric method for the quantitative determination of citalopram hydrobromide in pharmaceutical raw and tablet formulations has been proposed. The newly proposed method is based on the charge transfer reaction between citalopram as electron donor and chloranil as electron acceptor. The charge transfer complex of citalopram and chloranil shows λ(max) at 550 nm in methanol. The experimental conditions such as reaction time, temperature, stoichiometry of the colored complex have been optimized. The developed method allows the determination of citalopram hydrobromide over a concentration range of 1-25 mg/ ml. The proposed method is used to determine the citalopram in tablet dosage forms. The results of proposed method are compared to the official USP method. The newly developed method is accurate, reproducible and easy to perform. It does not require stringent experimental conditions. No interference has been observed for excipients and additives in tablet formulations.

The influence of matrix degradation and functionality on cell survival and morphogenesis in PEG-based hydrogels.

Two norbornene-functionalized PEG macromers are synthesized to render hydrogels with different hydrolytic degradability. Dithiol-containing linkers such as dithiothreitol or biscysteine-containing peptides are used to control proteolytic degradability. The influence of thiol-ene gel degradability on cell survival and morphogenesis in 3D is assessed using hMSCs and pancreatic MIN6 ß cells. The initial cell viability can be negatively affected in highly crosslinked thiol-ene hydrogels. When cells are encapsulated in thiol-ene gels lacking cell-adhesive motifs, their survival and proliferation are promoted in more hydrolytically labile hydrogels. The degree of 3D cell spreading in encapsulated hMSCs is enhanced when the matrices are immobilized with cell-adhesive motifs.

The influence of matrix properties on growth and morphogenesis of human pancreatic ductal epithelial cells in 3D.

A highly tunable synthetic biomimetic hydrogel platform was developed to study the growth and morphogenesis of pancreatic ductal epithelial cells (PDEC) under the influence of a myriad of instructive cues. A PDEC line, PANC-1, was used as a model system to illustrate the importance of matrix compositions on cell fate determination. PANC-1 is an immortalized ductal epithelial cell line widely used in the study of pancreatic tumor cell behaviors. PANC-1 cells are also increasingly explored as a potential cell source for endocrine differentiation. Thus far, most studies related to PANC-1, among other PDEC lines, are performed on 2D culture surfaces. Here, we evaluated the effect of matrix compositions on PANC-1 cell growth and morphogenesis in 3D. Specifically, PANC-1 cells were encapsulated in PEG-based hydrogels prepared by step-growth thiol-ene photopolymerization. It was found that thiol-ene hydrogels provided a cytocompatible environment for encapsulation and 3D culture of PANC-1 cells. In contrast to a monolayer morphology on 2D culture surfaces, PANC-1 cells formed clusters in 3D thiol-ene hydrogels within 4 days of culture. After culturing for 10 days, however, the growth and structures of these clusters were significantly impacted by gel matrix properties, including sensitivity of the matrix to proteases, stiffness of the matrix, and ECM-mimetic motifs. The use of matrix metalloproteinase (MMP) sensitive linker or the immobilization of fibronectin-derived RGDS ligand in the matrix promoted PANC-1 cell growth and encouraged them to adopt ductal cyst-like structures. On the other hand, the encapsulated cells formed smaller and more compact aggregates in non-MMP responsive gels. The incorporation of laminin-derived YIGSR peptide did not enhance cell growth and caused the cells to form compact aggregates. Immobilized YIGSR also enhanced the expression of epithelial cell markers including ß-catenin and E-cadherin. These studies have established PEG-peptide hydrogels formed by thiol-ene photo-click reaction as a suitable platform for studying and manipulating pancreatic epithelial cell growth and morphogenesis in 3D.

Generation and recovery of ß-cell spheroids from step-growth PEG-peptide hydrogels.

Hydrogels are hydrophilic crosslinked polymers that provide a three-dimensional microenvironment with tissue-like elasticity and high permeability for culturing therapeutically relevant cells or tissues. Hydrogels prepared from poly(ethylene glycol) (PEG) derivatives are increasingly used for a variety of tissue engineering applications, in part due to their tunable and cytocompatible properties. In this protocol, we utilized thiol-ene step-growth photopolymerizations to fabricate PEG-peptide hydrogels for encapsulating pancreatic MIN6 b-cells. The gels were formed by 4-arm PEG-norbornene (PEG4NB) macromer and a chymotrypsin-sensitive peptide crosslinker (CGGYC). The hydrophilic and non-fouling nature of PEG offers a cytocompatible microenvironment for cell survival and proliferation in 3D, while the use of chymotrypsin-sensitive peptide sequence (CGGY↓C, arrow indicates enzyme cleavage site, while terminal cysteine residues were added for thiol-ene crosslinking) permits rapid recovery of cell constructs forming within the hydrogel. The following protocol elaborates techniques for: (1) Encapsulation of MIN6 ß-cells in thiol-ene hydrogels; (2) Qualitative and quantitative cell viability assays to determine cell survival and proliferation; (3) Recovery of cell spheroids using chymotrypsin-mediated gel erosion; and (4) Structural and functional analysis of the recovered spheroids.

PEG hydrogels formed by thiol-ene photo-click chemistry and their effect on the formation and recovery of insulin-secreting cell spheroids.

Hydrogels provide three-dimensional frameworks with tissue-like elasticity and high permeability for culturing therapeutically relevant cells or tissues. While recent research efforts have created diverse macromer chemistry to form hydrogels, the mechanisms of hydrogel polymerization for in situ cell encapsulation remain limited. Hydrogels prepared from chain-growth photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) are commonly used to encapsulate cells. However, free radical associated cell damage poses significant limitation for this gel platform. More recently, PEG hydrogels formed by thiol-ene photo-click chemistry have been developed for cell encapsulation. While both chain-growth and step-growth photopolymerizations offer spatial-temporal control over polymerization kinetics, step-growth thiol-ene hydrogels offer more diverse and preferential properties. Here, we report the superior properties of step-growth thiol-ene click hydrogels, including cytocompatibility of the reactions, improved hydrogel physical properties, and the ability for 3D culture of pancreatic ß-cells. Cells encapsulated in thiol-ene hydrogels formed spherical clusters naturally and were retrieved via rapid chymotrypsin-mediated gel erosion. The recovered cell spheroids released insulin in response to glucose treatment, demonstrating the cytocompatibility of thiol-ene hydrogels and the enzymatic mechanism of cell spheroids recovery. Thiol-ene click reactions provide an attractive means to fabricate PEG hydrogels with superior gel properties for in situ cell encapsulation, as well as to generate and recover 3D cellular structures for regenerative medicine applications.

Application of Certain π-Acceptors for the Spectrophotometric Determination of Alendronate Sodium in Pharmaceutical Bulk and Dosage Forms.

Two simple, fast, and accurate spectrophotometric methods for the determination of alendronate sodium are described. The methods are based on charge-transfer complex formation of the drug with two π-electron acceptors 7,7,7,8-tetracyanoquinodimethane (TCNQ) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) in acetonitrile and methanol medium. The methods are followed spectrophotometrically by measuring the maximum absorbance at 840 nm and 465 nm, respectively. Under the optimized experimental conditions, the calibration curves showed a linear relationship over the concentration ranges of 2-10 µg mL(-1) and 2-12 µg mL(-1), respectively. The optimal reactions conditions values such as the reagent concentration, heating time, and stability of reaction product were determined. No significant difference was obtained between the results of newly proposed methods and the B.P. Titrimetric procedures. The charge transfer approach using TCNQ and DDQ procedures described in this paper is simple, fast, accurate, precise, and extraction-free.

Prevalence of Salmonella infecting bacteriophages associated with Ontario pig farms and the holding area of a high capacity pork processing facility.

BACKGROUND: There is interest in applying bacteriophages to control Salmonella in pig production and pork processing. The following reports on the prevalence of Salmonella infecting bacteriophages within Ontario pig farms and associated with the holding area of a pork slaughterhouse. RESULTS: Salmonella infecting bacteriophages were present in 30 and 28 of the effluent manure samples collected from 36 farms using S. Typhimurium DT104 or S. Heidelberg as host cell respectively. Bacteriophages were recovered in 95-100% of the 48 samples taken from holding pens within a high capacity slaughterhouse over a 12 month period. Bacteriophages isolated from farms exhibited similar host ranges which differed to that of slaughterhouse isolates. Salmonella (n = 21) from the slaughterhouse were susceptible to the endogenous bacteriophages. Despite being susceptible to the resident phages, the Salmonella populations were found to be genetically stable with the same genotypes being recovered over successive visits. Salmonella isolated from the farms were frequently resistant to the endogenous phages. CONCLUSIONS: Bacteriophages are prevalent in the pig slaughterhouse environment although they do not have a significant impact on the genetic structure of Salmonella populations. However, there was evidence that the Salmonella population structure on farms is influenced by the presence of infecting phages.

Development and application of spectrophotometric methods for the determination of citalopram hydrobromide in dosage forms.

Study was carried out to develop two simple, fast, accurate and sensitive spectrophotometric methods (A and B) for the determination of citalopram hydrobromide in commercial tablet formulations. In method A, UV spectrophotometer determined the contents of citalopram hydrobromide in tablets at 240 nm in methanol solvent. The linear range was 5-40 microg ml-1 with molar absorptivity 1.4x10(4) l mol-1 cm-1. While the method B based on the reaction of citalopram base as n-electron donor with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone as pi-acceptors to give highly colored complex species that absorb maximally at 590 nm. Beer's law was obeyed in the concentration limit of 10-250 microg ml-1 with molar absorptivity 3.3x10(3) l mol-1 cm-1 for citalopram hydrobromide. The limits of detection and limit of quantification was calculated and found to be 5.2 microg ml-1 and 17.4 microg ml-1 respectively. The proposed methods were found to be rapid, accurate, precise and sensitive for the determination of citalopram hydrobromide in commercial tablet formulations with out interferences from common additives encountered.

Spectrophotometric determination of tranexamic acid in pharmaceutical bulk and dosage forms.

In this study, a simple, fast, accurate and sensitive spectrophotometric method has been developed for the determination of tranexamic acid in bulk and pharmaceutical preparations. The method is based on the reaction of ninhydrin with the primary amino group of tranexamic acid in the basic medium at pH 8.0. The reaction produces a bluish-purple color which absorbs maximally at 565 nm. Beer's law was obeyed in the range of 3-40 microg ml(-1) with molar absorptivity of 5.093 x 10(3) L mol(-1) cm(-1). The effects of various factors such as temperature, heating time, concentration of reagent, color stability and interferences were investigated to optimize the procedure. The results have been validated analytically and statistically. The proposed method has been applied for the determination of tranexamic acid in bulk and pharmaceutical preparations with good results.