Source-specific probabilistic risk assessment of microplastics in soils applying quality criteria and data alignment methods.

The risk characterization of microplastics (MP) in soil is challenging due to the non-alignment of existing exposure and effect data. Therefore, we applied data alignment methods to assess the risks of MP in soils subject to different sources of MP pollution. Our findings reveal variations in MP characteristics among sources, emphasizing the need for source-specific alignments. To assess the reliability of the data, we applied Quality Assurance/Quality Control (QA/QC) screening tools. Risk assessment was carried out probabilistically, considering uncertainties in data alignments and effect thresholds. The Hazardous Concentrations for 5% (HC5) of the species were significantly higher compared to earlier studies and ranged between 4.0 × 107 and 2.3 × 108 particles (1-5000 µm)/kg of dry soil for different MP sources and ecologically relevant metrics. The highest risk was calculated for soils with MP entering via diffuse and unspecified local sources, i.e., "background pollution". However, the source with the highest proportion of high-risk values was sewage, followed by background pollution and mulching. Notably, locations exceeding the risk threshold obtained low scores in the QA/QC assessment. No risks were observed for soils with compost. To improve future risk assessments, we advise to primarily test environmentally relevant MP mixtures and adhere to strict quality criteria.

In vitro bioassays for monitoring drinking water quality of tap water, domestic filtration and bottled water.

BACKGROUND: Location-specific patterns of regulated and non-regulated disinfection byproducts (DBPs) were detected in tap water samples of the Barcelona Metropolitan Area. However, it remains unclear if the detected DBPs together with undetected DPBs and organic micropollutants can lead to mixture effects in drinking water. OBJECTIVE: To evaluate the neurotoxicity, oxidative stress response and cytotoxicity of 42 tap water samples, 6 treated with activated carbon filters, 5 with reverse osmosis and 9 bottled waters. To compare the measured effects of the extracts with the mixture effects predicted from the detected concentrations and the relative effect potencies of the detected DBPs using the mixture model of concentration addition. METHODS: Mixtures of organic chemicals in water samples were enriched by solid phase extraction and tested for cytotoxicity and neurite outgrowth inhibition in the neuronal cell line SH-SY5Y and for cytotoxicity and oxidative stress response in the AREc32 assay. RESULTS: Unenriched water did not trigger neurotoxicity or cytotoxicity. After up to 500-fold enrichment, few extracts showed cytotoxicity. Disinfected water showed low neurotoxicity at 20- to 300-fold enrichment and oxidative stress response at 8- to 140-fold enrichment. Non-regulated non-volatile DBPs, particularly (brominated) haloacetonitriles dominated the predicted mixture effects of the detected chemicals and predicted effects agreed with the measured effects. By hierarchical clustering we identified strong geographical patterns in the types of DPBs and their association with effects. Activated carbon filters did not show a consistent reduction of effects but domestic reverse osmosis filters decreased the effect to that of bottled water. IMPACT STATEMENT: Bioassays are an important complement to chemical analysis of disinfection by-products (DBPs) in drinking water. Comparison of the measured oxidative stress response and mixture effects predicted from the detected chemicals and their relative effect potencies allowed the identification of the forcing agents for the mixture effects, which differed by location but were mainly non-regulated DBPs. This study demonstrates the relevance of non-regulated DBPs from a toxicological perspective. In vitro bioassays, in particular reporter gene assays for oxidative stress response that integrate different reactive toxicity pathways including genotoxicity, may therefore serve as sum parameters for drinking water quality assessment.

On the probability of ecological risks from microplastics in the Laurentian Great lakes.

The Laurentian Great Lakes represent important and iconic ecosystems. Microplastic pollution has become a major problem among other anthropogenic stressors in these lakes. There is a need for policy development, however, assessing the risks of microplastics is complicated due to the uncertainty and poor quality of the data and incompatibility of exposure and effect data for microplastics with different properties. Here we provide a prospective probabilistic risk assessment for Great Lakes sediments and surface waters that corrects for the misalignment between exposure and effect data, accounts for variability due to sample volume when using trawl samples, for the random spatiotemporal variability of exposure data, for uncertainty in data quality (QA/QC), in the slope of the power law used to rescale the data, and in the HC5 threshold effect concentration obtained from Species Sensitivity Distributions (SSDs). We rank the lakes in order of the increasing likelihood of risks from microplastics, for pelagic and benthic exposures. A lake-wide risk, i.e. where each location exceeds the risk limit, is not found for any of the lakes. However, the probability of a risk from food dilution occurring in parts of the lakes is 13-15% of the benthic exposures in Lakes Erie and Huron, and 8.3-10.3% of the pelagic exposures in Lake Michigan, Lake Huron, Lake Superior, and Lake Erie, and 24% of the pelagic exposures in Lake Ontario. To reduce the identified uncertainties, we recommend that future research focuses on characterizing and quantifying environmentally relevant microplastic (ERMP) over a wider size range (ideally 1-5000 µm) so that probability density functions (PDFs) can be better calibrated for different habitats. Toxicity effect testing should use a similarly wide range of sizes and other ERMP characteristics so that complex data alignments can be minimized and assumptions regarding ecologically relevant dose metrics (ERMs) can be validated.

Large-scale monitoring and risk assessment of microplastics in the Amazon River.

Microplastics (MPs) are one of the most widespread contaminants worldwide, yet their risks for freshwater ecosystems have seldom been investigated. In this study, we performed a large monitoring campaign to assess the presence and risks of MPs in Amazonian freshwater ecosystems. We investigated MP pollution in 40 samples collected along 1500 km in the Brazilian Amazon, including the Amazon River, three major tributaries, and several streams next to the most important urban areas. MPs in the 55-5000 µm size range were characterized (size, shape, color) by microscopy and identified (polymer composition) by infrared spectroscopy. Ecotoxicological risks were assessed using chronic Species Sensitivity Distributions for effects triggered by food dilution and tissue translocation using data alignment methods that correct for polydispersity of environmental MPs and bioaccessibility. This study shows that MPs are ubiquitous contaminants in Amazonian freshwater ecosystems, with measured concentrations (55-5000 µm) ranging between 5 and 152 MPs/m3 in the Amazon River and its main tributaries, and between 23 and 74,550 MPs/m3 in urban streams. The calculated Hazardous Concentration for the 5% of species (HC5) derived from the SSDs for the entire MP range (1-5000 µm) were 1.6 × 107 MPs/m3 (95% CI: 1.2 × 106 - 4.0 × 108) for food dilution, and 1.8 × 107 MPs/m3 (95% CI: 1.5 × 106 - 4.3 × 108) for translocation. Rescaled exposure concentrations (1-5000 µm) in the Amazon River and tributaries ranged between 6.0 × 103 and 1.8 × 105 MPs/m3, and were significantly lower than the calculated HC5 values. Rescaled concentrations in urban streams ranged between 1.7 × 105 and 5.7 × 108 MPs/m3, and exceeded both calculated HC5 values in 20% of the locations. This study shows that ecological impacts by MP contamination are not likely to happen in the Amazon River and its major tributaries. However, risks for freshwater organisms may be expected in near densely populated areas, such as the cities of Manaus or Belem, which have limited wastewater treatment facilities.

Risk assessment of microplastics in freshwater sediments guided by strict quality criteria and data alignment methods.

Determining the risks of microplastics is difficult because data is of variable quality and cannot be compared. Although sediments are important sinks for microplastics, no holistic risk assessment framework is available for this compartment. Here we assess the risks of microplastics in freshwater sediments worldwide, using strict quality criteria and alignment methods. Published exposure data were screened for quality using new criteria for microplastics in sediment and were rescaled to the standard 1-5000 µm microplastic size range. Threshold effect data were also screened for quality and were aligned to account for the polydispersity of environmental microplastics and for their bioaccessible fraction. Risks were characterized for effects triggered by food dilution or translocation, using ingested particle volume and surface area as ecologically relevant metrics, respectively. Based on species sensitivity distributions, we determined Hazardous Concentrations for 5% of the species (HC5, with 95% CI) of 4.9 × 109 (6.6 × 107 - 1.9 × 1011) and 1.1 × 1010 (3.2 × 108 - 4.0 × 1011) particles / kg sediment dry weight, for food dilution and translocation, respectively. For all locations considered, exposure concentrations were either below or in the margin of uncertainty of the HC5 values. We conclude that risks from microplastics to benthic communities cannot be excluded at current concentrations in sediments worldwide.

Insights to estimate exposure to regulated and non-regulated disinfection by-products in drinking water.

BACKGROUND: Knowledge about human exposure and health effects associated with non-routinely monitored disinfection by-products (DBPs) in drinking water is sparse. OBJECTIVE: To provide insights to estimate exposure to regulated and non-regulated DBPs in drinking water. METHODS: We collected tap water from homes (N = 42), bottled water (N = 10), filtered tap water with domestic activated carbon jars (N = 6) and reverse osmosis (N = 5), and urine (N = 39) samples of participants from Barcelona, Spain. We analyzed 11 haloacetic acids (HAAs), 4 trihalomethanes (THMs), 4 haloacetonitriles (HANs), 2 haloketones, chlorate, chlorite, and trichloronitromethane in water and HAAs in urine samples. Personal information on water intake and socio-demographics was ascertained in the study population (N = 39) through questionnaires. Statistical models were developed based on THMs as explanatory variables using multivariate linear regression and machine learning techniques to predict non-regulated DBPs. RESULTS: Chlorate, THMs, HAAs, and HANs were quantified in 98-100% tap water samples with median concentration of 214, 42, 18, and 3.2 µg/L, respectively. Multivariate linear regression models had similar or higher goodness of fit (R2) compared to machine learning models. Multivariate linear models for dichloro-, trichloro-, and bromodichloroacetic acid, dichloroacetonitrile, bromochloroacetonitrile, dibromoacetonitrile, trichloropropnanone, and chlorite showed good predictive ability (R 2 = 0.8-0.9) as 80-90% of total variance could be explained by THM concentrations. Activated carbon filters reduced DBP concentrations to a variable extent (27-80%), and reverse osmosis reduced DBP concentrations ≥98%. Only chlorate was detected in bottled water samples (N = 3), with median = 13.0 µg/L. Creatinine-adjusted trichloroacetic acid was the most frequently detected HAA in urine samples (69.2%), and moderately correlated with estimated drinking water intake (r = 0.48). SIGNIFICANCE: Findings provide valuable insights for DBP exposure assessment in epidemiological studies. Validation of predictive models in a larger number of samples and replication in different settings is warranted. IMPACT STATEMENT: Our study focused on assessing and describing the occurrence of several classes of DBPs in drinking water and developing exposure models of good predictive ability for non-regulated DBPs.

Non targeted screening of nitrogen containing disinfection by-products in formation potential tests of river water and subsequent monitoring in tap water samples.

The generation of disinfection by-products during water chlorination is a major concern in water treatment, given the potential health risks that these substances may pose. In particular, nitrogen-containing DBPs are believed to have greater toxicological significance than carbon-based DBPs. Hence, high performance liquid chromatography coupled to high-resolution mass spectrometry (HPLC-HRMS) in positive mode was employed to identify new non-volatile nitrogen containing disinfection by-products (DBPs) and to assess their presence in potable water. Nine water samples were taken in the Llobregat river, in the context of a water reuse trial, near the catchment of a drinking water treatment plant (DWTP) in 2019. River samples were disinfected with chlorine under controlled formation potential tests conditions and analysed with a non-target approach. The peak lists of raw and chlorinated samples were compared exhaustively, resulting in an extensive list of 495 DBPs that include bromine and/or chlorine atoms. 172 of these species were found frequently, in three or more chlorinated samples. The empirical formulae of these DBPs were unambiguously annotated on the basis of accurate m/z measurements, isotopic patterns and common heuristic rules. Most of the annotated species (310) contained bromide, which is consistent with the relatively high bromide content of the Llobregat basin (>0.3 mg/l). Drinking water samples were taken at the outlet of the DWTP during the same sampling period. According to their analysis, a large portion of the DBPs detected after the formation potential tests do not reach real-life drinking water, which suggests that the treatment train successfully removes a significant fraction of DBP precursors. However, 131 DBPs could still be detected in the final product water. A larger sampling was carried in the Barcelona water distribution network, during six consecutive weeks, and it revealed the presence of 78 halogenated DBPs in end-consumer water, most of which were nitrogen-containing. MS/MS fragmentation and retention times were employed to tentatively suggest molecular structure for these recalcitrant DBPs.

Polymers of micro(nano) plastic in household tap water of the Barcelona Metropolitan Area.

Microplastics (MPLs) are emerging persistent pollutants affecting drinking water systems, and different studies have reported their presence in tap water. However, most of the work has a focus on particles in the 100-5 µm range. Here, a workflow to identify and quantify polymers of micro and nanoplastics (MNPLs), with sizes from 0.7 to 20 µm in tap water, is presented. The analytical method consisted of water fractionated filtration followed by toluene ultrasonic-assisted extraction and size-exclusion chromatography, using an advanced polymer chromatography column coupled to high-resolution mass spectrometry with atmospheric pressure photoionization source with negative and positive ionization conditions (HPLC(APC)-APPI(±)-HRMS) and normal phase chromatography HILIC LUNA® column and electrospray ionisation source in positive and negative mode (HPLC(HILIC)-ESI(±)-HRMS). The acquisition was performed in full scan mode, and the subsequent tentative identification of MNPLs polymers has been based on increasing the confirmation level, including the characterisation of monomers by using Kendrick Mass Defect (KMD) analysis, and confirmation and quantification using standards. This approach was applied to assess MNPLs in tap water samples of the Barcelona Metropolitan Area (BMA), that were collected from August to October 2020 from home taps of volunteers distributed in the 42 postal codes of the BMA. Polyethylene (PE), polypropylene (PP), polyisoprene (PI), polybutadiene (PBD), polystyrene (PS), polyamide (PA), and polydimethylsiloxanes (PDMS) were identified. PE, PP, and PA were the most highly detected polymers, and PI and PBD were found at the highest concentrations (9,143 and 1,897 ng/L, respectively). A principal component analysis (PCA) was conducted to assess differences in MNPLs occurrence in drinking water, that was provided from the two drinking water treatment plants (DWTPs) suppliers. Results showed that no significant differences (at 95% confidence level) were established between the drinking water supplies to the different areas of the BMA.

Automated µFTIR Imaging Demonstrates Taxon-Specific and Selective Uptake of Microplastic by Freshwater Invertebrates.

Microplastic particles can be deposited to sediments and subsequently ingested by benthic organisms. It is unknown to what extent ingestion of microplastic is taxon-specific or whether taxa can be selective toward certain types of microplastics. Here, we used state-of-the-art automated micro-Fourier-transform infrared (µFTIR) imaging and attenuated total reflectance FTIR spectroscopy to determine small-size (20-500 µm) and large-size (500-5000 µm) microplastic particles in sediments and a range of benthic invertebrate species sampled simultaneously from the Dommel River in the Netherlands. Microplastic number concentrations differed across taxa at the same locations, demonstrating taxon-specific uptake, whereas size distributions were the same across sediments and taxa. At the site with the highest concentration, microplastic occupied up to 4.0% of the gut volume of Asellidae. Particle shape distributions were often not statistically different between sediments and taxa, except for Astacidea at one of the locations where the proportion of particles with a length to width ratio >3 (i.e., fibers) was twice as high in sediments than in Astacidea. Acrylates/polyurethane/varnish was predominately found in sediments, while soft and rubbery polymers ethylene propylene diene monomer and polyethylene-chlorinated were the dominant polymers found in invertebrates. Microplastic polymer composition and thus polymer density differed significantly between invertebrates and their host sediment. Trophic transfer at the base of the food web appears to have a filter function with respect to microplastic particle types and shapes. Together with the very high ingestion rates, this has clear implications for ecological and human health risks, where uptake concerns edible species (e.g., Astacidea).

Solving the Nonalignment of Methods and Approaches Used in Microplastic Research to Consistently Characterize Risk.

The lack of standard approaches in microplastic research limits progress in the abatement of plastic pollution. Here, we propose and test rescaling methods that are able to improve the alignment of methods used in microplastic research. We describe a method to correct for the differences in size ranges as used by studies reporting microplastic concentrations and demonstrate how this reduces the variation in aqueous-phase concentrations caused by method differences. We provide a method to interchange between number, volume, and mass concentrations using probability density functions that represent environmental microplastic. Finally, we use this method to correct for the incompatibility of data as used in current species sensitivity distributions (SSDs), caused by differences in the microplastic types used in effect studies and those in nature. We derived threshold effect concentrations from such a corrected SSD for freshwater species. Comparison of the rescaled exposure concentrations and threshold effect concentrations reveals that the latter would be exceeded for 1.5% of the known surface water exposure concentrations worldwide. Altogether, this toolset allows us to correct for the diversity of microplastic, to address it in a common language, and to assess its risks as one environmental material.

Distribution of microplastic and small macroplastic particles across four fish species and sediment in an African lake.

Pollution with microplastics has become an environmental concern worldwide. Yet, little information is available on the distribution of microplastics in lakes. Lake Ziway is one of the largest lakes in Ethiopia and is known for its fishing and drinking water supply. This study aims to examine the distribution of plastic particles, of all sizes (micro- and small macro-plastics) in four of the major fish species of the lake and in its shoreline sediment. The gastrointestinal tracts analysis showed that 35% of the sampled fishes ingested plastic particles. The median number of particles per fish was 4 (range 1-26). Benthic (Clarias gariepinus) and benthopelagic (Cyprinus carpio and Carassius carassius) fish species were found to contain a significantly higher number of plastic particles in comparison to the planktivorous fish species (Oreochromis niloticus). More fishes ingested plastic particles in the wet compared to the dry season. The maximum plastic size (40 mm fibre) was found in C. carpio. Estimated median mass of plastic particles in fish was 0.07 (0.0002-385.2) mg/kg_ww. Fish and sediment samples close to known potential sources of plastic particles had a higher plastic ingestion frequency (52% of the fish) and higher plastic concentration compared to the other parts of the lake. The median count and mass of plastic particles measured in sediment of the lake were 30,000 (400-124,000) particles/m3 and 764 (0.05-36,233) mg/kg_dw, respectively, the upper limits of which exceed known effect thresholds. Attenuated total reflection (ATR) - Fourier-transform infrared (FTIR) spectroscopy showed that polypropylene, polyethylene and alkyd-varnish were the dominant polymers in fishes and in sediment. The plastic particles size distributions were Log-linear and were identical for plastic particles found in fish and in sediment, suggesting strong benthic-pelagic coupling of plastic particles transfer.

Quality Criteria for Microplastic Effect Studies in the Context of Risk Assessment: A Critical Review.

In the literature, there is widespread consensus that methods in plastic research need improvement. Current limitations in quality assurance and harmonization prevent progress in our understanding of the true effects of microplastic in the environment. Following the recent development of quality assessment methods for studies reporting concentrations in biota and water samples, we propose a method to assess the quality of microplastic effect studies. We reviewed 105 microplastic effect studies with aquatic biota, provided a systematic overview of their characteristics, developed 20 quality criteria in four main criteria categories (particle characterization, experimental design, applicability in risk assessment, and ecological relevance), propose a protocol for future effect studies with particles, and, finally, used all the information to define the weight of evidence with respect to demonstrated effect mechanisms. On average, studies scored 44.6% (range 20-77.5%) of the maximum score. No study scored positively on all criteria, reconfirming the urgent need for better quality assurance. Most urgent recommendations for improvement relate to avoiding and verifying background contamination, and to improving the environmental relevance of exposure conditions. The majority of the studies (86.7%) evaluated on particle characteristics properly, nonetheless it should be underlined that by failing to provide characteristics of the particles, an entire experiment can become irreproducible. Studies addressed environmentally realistic polymer types fairly well; however, there was a mismatch between sizes tested and those targeted when analyzing microplastic in environmental samples. In far too many instances, studies suggest and speculate mechanisms that are poorly supported by the design and reporting of data in the study. This represents a problem for decision-makers and needs to be minimized in future research. In their papers, authors frame 10 effects mechanisms as "suggested", whereas 7 of them are framed as "demonstrated". When accounting for the quality of the studies according to our assessment, three of these mechanisms remained. These are inhibition of food assimilation and/or decreased nutritional value of food, internal physical damage, and external physical damage. We recommend that risk assessment addresses these mechanisms with higher priority.

Microplastics in Freshwater Biota: A Critical Review of Isolation, Characterization, and Assessment Methods.

Freshwater systems provide key pathways for microplastic (MP) pollution, and although existing studies have demonstrated the susceptibility of freshwater biota to ingestion, translocation, and trophic transfer, specific challenges pertaining to methodological standardization remain largely unresolved, particularly with respect to isolating, characterizing, and assessing MPs. Here, a critical review is performed outlining the challenges and limitations currently faced by freshwater MP researchers, which may well apply across the MP research spectrum. Recommendations are provided for methodological standardization, particularly in MP characterization, quality assurance, and quality control (QA/QC) procedures as well as reporting. Considerations for the assessment of MPs in freshwater biota as a means of improving comparisons between studies are discussed. Technological advancements, including the improvement of laboratory infrastructure for identifying MPs within the smaller size range as well as methodological standardization are essential in providing policy makers with tools and measures necessary to determine the distribution of MPs within freshwater ecosystems, while also allowing for comparability and providing compliance for future monitoring requirements.

Effects of nanoplastics and microplastics on the growth of sediment-rooted macrophytes.

Plastic debris of all sizes has been detected in marine, terrestrial and freshwater habitats. Effects of plastic debris on macrophytes have hardly been studied, despite their importance in aquatic ecosystems. We provide the first experimental study exploring nano- and microplastic effects on the growth of sediment-rooted macrophytes. Myriophyllum spicatum and Elodea sp. were exposed to sediments amended with six doses of polystyrene (PS) nanoplastic (50-190 nm, up to 3% sediment dry weight) and PS microplastic (20-500 µm, up to 10% dry weight) under laboratory conditions. Both macrophyte species were tested for changes in root and shoot dry weight (DW), relative growth rate (RGR), shoot to root ratio (S:R), main shoot length and side shoot length. Microplastics did not produce consistent dose-effect relationships on the endpoints tested, except that main shoot length was reduced for M. spicatum with increasing microplastic concentration. Nanoplastic significantly reduced S:R for both macrophytes as a result of increased root biomass compared to shoot biomass. Nanoplastic also caused a decrease in M. spicatum main shoot length; however, shoot biomass was not affected. Elodea sp. side shoot length, root and shoot biomass and RGR were positively correlated to the nanoplastic concentration. All effects occurred at higher than environmentally realistic concentrations, suggesting no immediate implications for ecological risks. Our study did not aim for the elucidation of the exact mechanistic processes that cause the effects, however, particle size seems to play an important factor. CAPSULE: Nano- and microplastics affect growth of sediment-rooted macrophytes.

Ingestion and Chronic Effects of Car Tire Tread Particles on Freshwater Benthic Macroinvertebrates.

Micronized particles released from car tires have been found to contribute substantially to microplastic pollution, triggering the need to evaluate their effects on biota. In the present study, four freshwater benthic macroinvertebrates were exposed for 28 days to tread particles (TP; 10-586 µm) made from used car tires at concentrations of 0, 0.1, 0.3, 1, 3, and 10% sediment dry weight. No adverse effects were found on the survival, growth, and feeding rate of Gammarus pulex and Asellus aquaticus, the survival and growth of Tubifex spp., and the number of worms and growth of Lumbriculus variegatus. A method to quantify TP numbers inside biota was developed and here applied to G. pulex. In bodies and faces of G. pulex exposed to 10% car tire TP, averages of 2.5 and 4 tread particles per organism were found, respectively. Chemical analysis showed that, although car tire TP had a high intrinsic zinc content, only small fractions of the heavy metals present were bioavailable. PAHs in the TP-sediment mixtures also remained below existing toxicity thresholds. This combination of results suggests that real in situ effects of TP and TP-associated contaminants when dispersed in sediments are probably lower than those reported after forced leaching of contaminants from car tire particles.

Microplastic Effect Thresholds for Freshwater Benthic Macroinvertebrates.

Now that microplastics have been detected in lakes, rivers, and estuaries all over the globe, evaluating their effects on biota has become an urgent research priority. This is the first study that aims at determining the effect thresholds for a battery of six freshwater benthic macroinvertebrates with different species traits, using a wide range of microplastic concentrations. Standardized 28 days single species bioassays were performed under environmentally relevant exposure conditions using polystyrene microplastics (20-500 µm) mixed with sediment at concentrations ranging from 0 to 40% sediment dry weight (dw). Microplastics caused no effects on the survival of Gammarus pulex, Hyalella azteca, Asellus aquaticus, Sphaerium corneum, and Tubifex spp. and no effects were found on the reproduction of Lumbriculus variegatus. No significant differences in growth were found for H. azteca, A. aquaticus, S. corneum, L. variegatus, and Tubifex spp. However, G. pulex showed a significant reduction in growth (EC10 = 1.07% sediment dw) and microplastic uptake was proportional with microplastic concentrations in sediment. These results indicate that although the risks of environmentally realistic concentrations of microplastics may be low, they still may affect the biodiversity and the functioning of aquatic communities which after all also depend on the sensitive species.

Risks of Plastic Debris: Unravelling Fact, Opinion, Perception, and Belief.

Researcher and media alarms have caused plastic debris to be perceived as a major threat to humans and animals. However, although the waste of plastic in the environment is clearly undesirable for aesthetic and economic reasons, the actual environmental risks of different plastics and their associated chemicals remain largely unknown. Here we show how a systematic assessment of adverse outcome pathways based on ecologically relevant metrics for exposure and effect can bring risk assessment within reach. Results of such an assessment will help to respond to the current public worry in a balanced way and allow policy makers to take measures for scientifically sound reasons.