Methyl Jasmonate Alleviated the Adverse Effects of Cadmium Stress in Pea (Pisum sativum L.): A Nexus of Photosystem II Activity and Dynamics of Redox Balance.

The accumulation of cadmium (Cd) in leaves reduces photosynthetic capacity by degrading photosynthetic pigments, reducing photosystem II activity, and producing reactive oxygen species (ROS). Though it was demonstrated that the application of Methyl Jasmonate (MeJA) induces heavy metal (HM) stress tolerance in plants, its role in adjusting redox balance and photosynthetic machinery is unclear. In this study, the role of MeJA in modulating photosystem II (PSII) activity and antioxidant defense system was investigated to reduce the toxic effects of Cd on the growth of pea (Pisum sativum L.) cultivars. One-week-old seedlings of three pea varieties were subjected to Cd stress (0, 50, 100 µm), and MeJA (0, 1, 5, 10 µm) was applied as a foliar spray for 2 weeks. Cadmium stress reduced the growth of all three pea varieties. Cadmium stress decreased photosynthetic pigments [Chl a (58.15%), Chl b (48.97%), total Chl (51.9%) and carotenoids (44.01%)] and efficiency of photosystem II [Fv/Fm (19.52%) and Y(II; 67.67%)], while it substantially increased Cd accumulation along with an increase in ROS (79.09%) and lipid peroxidation (129.28%). However, such adverse effects of Cd stress varied in different pea varieties. Exogenous application of MeJA increased the activity of a battery of antioxidant enzymes [superoxide dismutase (33.68%), peroxidase (29.75%), and catalase (38.86%)], improved photosynthetic pigments and PSII efficiency. This led to improved growth of pea varieties under Cd stress, such as increased fresh and dry weights of shoots and roots. In addition, improvement in root biomass by MeJA was more significant than that of shoot biomass. Thus, the mitigating effect of MeJA was attributed to its role in cellular redox balance and photosynthetic machinery of pea plants when exposed to Cd stress.

Integrated application of plant bioregulator and micronutrients improves crop physiology, productivity and grain biofortification of delayed sown wheat.

Delay sowing of wheat is a common problem in Punjab that exacerbates serious yield loss. To reduce yield loss and improve yield, different combinations of foliar-applied bioregulator and micronutrients, control (CK), zinc (Zn), boron (B), thiourea (TU), Zn + B (ZnB), Zn + TU (ZnTU), B + TU (BTU), Zn + B + TU (ZnBTU) were applied at booting and grain filling stages in delayed sown wheat in 2017-18 and 2018-19. The results showed that ZnBTU treatment significantly increased leaf area index by 25.06% and 23.21%, spike length by 15.11% and 19.65% in 2017 and 2018, respectively, compared to CK. The ZnBTU treatment also increased 1000-grain weight by 21.96% and 22.01% in 2017 and 2018, respectively, compared to CK. Similarly, higher Zn, B and N contents in straw and grain were recoded for ZnBTU treatment which was statistically similar to ZnB and ZnTU treatments. Overall, ZnBTU treatment also increased the photosynthetic rate, transpiration rate, stomatal conductance by 46.67%, 26.03%, 76.25% and decreased internal CO2 by 28.18%, compared to CK, respectively. Moreover, ZnBTU also recorded the highest grain yield in 2017-18 (25.05%) and 2018-19 (28.49%) than CK. In conclusion, foliar application of ZnBTU at the booting and grain filling stages of delayed sown wheat could be a promising strategy to increase grain yield.

Potassium fertilization improves growth, yield and seed quality of sunflower (Helianthus annuus L.) under drought stress at different growth stages.

Water scarcity is a major concern for sunflower production in the semi-arid and arid regions of the world. Potassium (K) application has been found effective to alleviate the influence of drought stress; however, the impact of drought stress on seed quality of sunflower has not been reported frequently. Therefore, a field experiment was performed to determine the optimum K requirement for mitigating the adverse effects of water stress and improving growth and seed quality of spring-planted sunflower. Sunflower plants were exposed to water stress at different growth stages, i.e., Io = no stress (normal irrigation), I1 = pre-anthesisi stress (irrigation skipped at pre-anthesis stage), I2 = anthesis stress (irrigation skipped at anthesis stage) and I3 = post-anthesis stress (irrigation skipped at post-anthesis stage). Potassium was applied at four different rates, i.e., Ko = 0, K1 = 50, K2 = 100 and K3 = 150 kg ha-1. The results revealed that water stress at pre- and post-anthesis stages significantly reduced plant height, head diameter, number of achenes, oleic acid contents, and phosphorus (P) uptake. However, pre-anthesis stress improved linoleic acid contents. Treatment IoK3 (stress-free with 150 kg ha-1 K) was optimum combination for 1000-achene weight, biological and achene yields, oil contents, protein contents, and N and P uptake. Results indicated that a higher amount of K and irrigation resulted in higher yield, whereas yield and yield components decreased with early-stage water stress. Nevertheless, potassium application lowered the impacts of waters stress compared to no application. Keeping in view these results, it is recommended that sunflower must be supplied 150 kg ha-1 K in arid and semi-arid regions to achieve higher yield and better seed quality.

Auxin and Cytokinin Interplay during Leaf Morphogenesis and Phyllotaxy.

Auxins (IAA) and cytokinins (CKs) are the most influential phytohormones, having multifaceted roles in plants. They are key regulators of plant growth and developmental processes. Additionally, their interplay exerts tight control on plant development and differentiation. Although several reviews have been published detailing the auxin-cytokinin interplay in controlling root growth and differentiation, their roles in the shoot, particularly in leaf morphogenesis are largely unexplored. Recent reports have provided new insights on the roles of these two hormones and their interplay on leaf growth and development. In this review, we focus on the effect of auxins, CKs, and their interactions in regulating leaf morphogenesis. Additionally, the regulatory effects of the auxins and CKs interplay on the phyllotaxy of plants are discussed.

Exogenous Sodium Nitroprusside Mitigates Salt Stress in Lentil (Lens culinaris Medik.) by Affecting the Growth, Yield, and Biochemical Properties.

Soil salinity disrupts the physiological and biochemical processes of crop plants and ultimately leads to compromising future food security. Sodium nitroprusside (SNP), a contributor to nitric oxide (NO), holds the potential to alleviate abiotic stress effects and boost tolerance in plants, whereas less information is available on its role in salt-stressed lentils. We examined the effect of exogenously applied SNP on salt-stressed lentil plants by monitoring plant growth and yield-related attributes, biochemistry of enzymes (superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD)) amassing of leaf malondialdehyde (MDA) and hydrogen peroxide (H2O2). Salinity stress was induced by NaCl application at concentrations of 50 mM (moderate salinity) and 100 mM (severe salinity), while it was alleviated by SNP application at concentrations of 50 µM and 100 µM. Salinity stress severely inhibited the length of roots and shoots, the relative water content, and the chlorophyll content of the leaves, the number of branches, pods, seeds, seed yield, and biomass per plant. In addition, MDA, H2O2 as well as SOD, CAT, and POD activities were increased with increasing salinity levels. Plants supplemented with SNP (100 µM) showed a significant improvement in the growth- and yield-contributing parameters, especially in plants grown under moderate salinity (50 mM NaCl). Essentially, the application of 100 µM SNP remained effective to rescue lentil plants under moderate salinity by regulating plant growth and biochemical pathways. Thus, the exogenous application of SNP could be developed as a useful strategy for improving the performance of lentil plants in salinity-prone environments.

Integrated Application of Thiourea and Biochar Improves Maize Growth, Antioxidant Activity and Reduces Cadmium Bioavailability in Cadmium-Contaminated Soil.

Cadmium (Cd) contamination of croplands jeopardizes sustainable crop production and human health. However, curtailing Cd transfer and mobility in the rhizosphere-plant system is challenging. Sole application of biochar (BC) and thiourea (TU) has been reported to restrain Cd toxicity and uptake in plants. However, the combined applications of BC and TU in mitigating the harmful effects of Cd on plants have not yet been thoroughly investigated. Therefore, this study attempts to explore the integrated impact of three maize stalk BC application rates [B 0 (0% w/w), B 1 (2.5% w/w), and B 2 (5% w/w)] and three TU foliar application rates [T 0 (0 mg L-1), T 1 (600 mg L-1), and T 2 (1,200 mg L-1)] in remediating the adverse effects of Cd on maize growth, development, and physiology. Results demonstrated that Cd concentration in soil inhibited plant growth by reducing leaf area, photosynthesis activity, and enhanced oxidative stress in maize. Nevertheless, BC and TU application in combination (B 2 T 2) improved the fresh biomass, shoot height, leaf area, and photosynthesis rate of maize plants by 27, 42, 36, and 15%, respectively, compared with control (B 0 T 0). Additionally, the oxidative stress values [malondialdehyde (MDA), hydrogen peroxide (H2O2), and electrolyte leakage (EL)] were minimized by 26, 20, and 21%, respectively, under B 2 T 2 as compared with B 0 T 0. Antioxidant enzyme activities [superoxide dismutase (SOD) and catalase (CAT)] were 81 and 58%, respectively, higher in B 2 T 2 than in B 0 T 0. Besides, the shoot and root Cd concentrations were decreased by 42 and 49%, respectively, under B 2 T 2 compared with B 0 T 0. The recent study showed that the integrated effects of BC and TU have significant potential to improve the growth of maize on Cd-contaminated soil by reducing Cd content in plant organs (shoots and roots).

Insect pollinator diversity in four forested ecosystems of southern Punjab, Pakistan.

This study investigated pollinator assemblage diversity and richness in four forested ecosystems of southern Punjab, Pakistan, with different landscape types. Pirowal is situated in the plains of irrigated Punjab, Lal Suhanra is part of a sandy desert ecosystem, Ghazi Ghat is part of the Indus River delta, and Fort Munro is located in dry hilly mountains. A yearlong survey of pollinator populations was carried out in these four forested ecosystems from January to December of 2010. Fortnightly hand netting was performed for collecting flower-visiting insects whereas, pan traps of three colors (white, blue, and yellow) were deployed for collecting the data. A total of 8,812 individuals from two orders (Lepidoptera and Diptera) were observed, including 22 families and 154 species. Bees were the most abundant, with 4,502 individuals, and the most species-rich taxa, with 70 species in five families, followed by flies having 2,509 individuals and 51species in 10 families. Wasps were the least abundant with 1,801 individuals and 33 species in seven families. The assemblage structure of pollinator communities as visualized through rank abundance curves showed that there were many species with low abundance and only a few species with a much higher abundance. The most abundant species among the bees, in order, were Nomia sp.3, Megachile bicolor, and Colletes sp.3; among flies, Syrphus sp.2, Calliphoridae sp.1, and Empididae sp.4; and among wasps, Tiphiidae sp.1, Myzininae sp.2, and Scelionidae sp.1.

Trends of electronic waste pollution and its impact on the global environment and ecosystem.

Electronic waste (e-waste) is used for all electronic/electrical devices which are no more used. Conventionally, waste management policies are desfighandle the traditional waste. Although e-waste contains toxic materials, however, its management is rarely focused by policy makers; therefore, its negative impact on the global environment, ecosystem, and human health is aggravated. The review outlines the categories of e-waste materials, major pollutants including ferrous/non-ferrous metals, plastics, glass, printed circuit boards, cement, ceramic, and rubber beside, some valuable metals (such as copper, silver, gold, platinum). Toxic elements from e-waste materials, released in the air, water, and soil, include arsenic, cadmium, chromium, mercury, and lead, causing pollution. Although their roles in biological systems are poorly identified, however, they possess significant toxic and carcinogenic potential. It is therefore critical to monitor footprint and device strategies to address e-waste-linked issues from manufacturing, exportation, to ultimate dumping, including technology transmissions for its recycling. This review traces a plausible link among e-waste condition at a worldwide dimension, as far as settlement procedures to keep it secure and carefully monitored when traded. Their fate in the three spheres of the earth, i.e., water, soil, and air, impacts human health. The strategies and regulation to handle e-waste generation at the global level have been discussed. Graphical abstract .

Role of pollination in yield and physicochemical properties of tomatoes (Lycopersicon esculentum).

Very little is known about pollination and its effects on the yield and physicochemical properties of flowering plants in tropical countries. Wind and insect pollinators are among our natural resources because pollination is the most important ecosystem service performed by wind and insects, and is vital to the socio-economic status of human beings. In this experiment, different pollination methods for tomato plants were examined. Self-pollination was encouraged by covering the plants with a plastic sheet. Wind and insects were excluded from these plants, and thus only self-pollination was possible. The experiment occurred during the flowering stage. Wind-pollinated plants were covered with a muslin cloth, which excluded insects, and only wind could pass through the cloth. For insect pollination, plants remained uncovered, allowing free access to insects to pollinate the flowers. At fruit maturity, when fruits were completely red, fruits from each treatment were harvested on the same date and under the same conditions. Results illustrated the substantial importance of insects as pollinators of tomato crops. Open field had greater tomato yield and positive effects on physicochemical properties on fruit than under self and wind pollination.

Phyto-management of chromium contaminated soils through sunflower under exogenously applied 5-aminolevulinic acid.

Soil contamination with heavy metals is threatening the food security around the globe. Chromium (Cr) contamination results in poor quality and reduction in yield of crops. The present research was performed to figure out the Cr toxicity in sunflower and the ameliorative role of 5-aminolevulinic acid (ALA) as a plant growth regulator. The sunflower (FH-614) was grown under increasing concentration of Cr (0, 5, 10 and 20mgkg-1) alone and/or in combination with 5-ALA (0, 10 and 20mgL-1). Results showed that Cr suppressed the overall growth, biomass, gas exchange attributes and chlorophyll content of sunflower plants. Moreover, lower levels of Cr (5 and 10mgkg-1) increased the production of reactive oxygen species (ROS) and electrolyte leakage (EL) along with the activities of antioxidant enzymes i.e., superoxide dismutase (SOD), guaiacole peroxidase (POD), ascorbate (APX), catalase (CAT). But at higher concentration of Cr (20mgkg-1), the activities of these enzymes presented a declining trend. However, the addition of 5-ALA significantly alleviated the Cr-induced toxicity in sunflower plant and enhanced the plant growth and biomass parameters along with increased chlorophyll content, gas exchange attributes, soluble proteins and soil plant analysis development (SPAD) values by scavenging the ROS and lowering down the EL. The 5-ALA also enhanced the activities of antioxidant enzymes at all levels of Cr. The increase in Cr concentration in all plant parts such as leaf, root and stem was directly proportional to the Cr concentration in soil. The application of 5-ALA further enhanced the uptake of Cr and its concentration in the plants. To understand this variation in response of plants to 5-ALA, detailed studies are required on plant biochemistry and genetic modifications.

Radiation efficiency and nitrogen fertilizer impacts on sunflower crop in contrasting environments of Punjab, Pakistan.

Sunflower (Helianthus annuus L.) is the leading non-conventional oilseed crop in Pakistan. Nitrogen fertilizer can affect plant growth and productivity by changing canopy size which has an effect on the radiation use efficiency (RUE) of the crop. The response of sunflower hybrids in terms of phenology, fraction of intercepted radiation (F i), and RUE to nitrogenous rates (0, 60, 120, 180, and 240 kg ha-1) was studied in three field experiments conducted in three various environments: Multan (arid), Faisalabad (semi-arid), and Gujranwala (sub-humid) during spring seasons 2008 and 2009. The treatments were laid out according to a randomized complete block design with split plot arrangements, keeping the sunflower hybrids in main plots and nitrogen rates in sub-plots, and replicated three times. The results showed Hysun-38 took a maximum number of days to anthesis (101) as compared to Pioneer-64A93 (100) and Hysun-33 (99). The mean values of F i were 0.850, 0.903, and 0.978, and the estimated values of RUE for total aboveground dry matter were 2.14, 2.47, and 2.65 g MJ-1 at experimental locations of Multan, Faisalabad, and Gujranwala, respectively. The values of RUE for grain yield (RUEGY) were 0.78, 0.98, and 1.26 g MJ-1 at experimental locations of Multan, Faisalabad, and Gujranwala, respectively. The average RUEGY values over three locations were 2.61, 2.60, 2.43, and 2.36 g MJ-2 in N4 (180 kg ha-1), N5 (240 kg ha-1), N3 (120 kg ha-1), and N2 (60 kg ha-1) treatments, respectively. Increasing rates of N increased RUEGY over the standard treatment N3 (120 kg N ha-1); however, the averaged values over three locations were 1.22, 1.08, 0.99, and 0.92 g MJ-2 in N4, N5, N3, and N2 treatments, respectively. Therefore, optimum water and N doses are important for attaining higher RUE, which may enhance sunflower growth and yield.

Optimizing the phosphorus use in cotton by using CSM-CROPGRO-cotton model for semi-arid climate of Vehari-Punjab, Pakistan.

Crop nutrient management is an essential component of any cropping system. With increasing concerns over environmental protection, improvement in fertilizer use efficiencies has become a prime goal in global agriculture system. Phosphorus (P) is one of the most important nutrients, and strategies are required to optimize its use in important arable crops like cotton (Gossypium hirsutum L.) that has great significance. Sustainable P use in crop production could significantly avoid environmental hazards resulting from over-P fertilization. Crop growth modeling has emerged as an effective tool to assess and predict the optimal nutrient requirements for different crops. In present study, Decision Support System for Agro-technology Transfer (DSSAT) sub-model CSM-CROPGRO-Cotton-P was evaluated to estimate the observed and simulated P use in two cotton cultivars grown at three P application rates under the semi-arid climate of southern Punjab, Pakistan. The results revealed that both the cultivars performed best at medium rate of P application (57 kg ha-1) in terms of days to anthesis, days to maturity, seed cotton yield, total dry matter production, and harvest index during 2013 and 2014. Cultivar FH-142 performed better than MNH-886 in terms of different yield components. There was a good agreement between observed and simulated days to anthesis (0 to 1 day), days to maturity (0 to 2 days), seed cotton yield, total dry matter, and harvest index with an error of -4.4 to 15%, 12-7.5%, and 13-9.5% in MNH-886 and for FH-142, 4-16%, 19-11%, and 16-8.3% for growing years 2013 and 2014, respectively. CROPGRO-Cotton-P would be a useful tool to forecast cotton yield under different levels of P in cotton production system of the semi-arid climate of Southern Punjab.

Non-destructive Assessment of Plant Nitrogen Parameters Using Leaf Chlorophyll Measurements in Rice.

Non-destructive assessment of plant nitrogen (N) status is essential for efficient crop production and N management in intensive rice (Oryza sativa L.) cropping systems. Chlorophyll meter (SPAD-502) has been widely used as a rapid, non-destructive and cost-effective diagnostic tool for in-season assessment of crop N status. The present study was intended to establish the quantitative relationships between chlorophyll meters readings, plant N concentration (PNC), N nutrition index (NNI), accumulated N deficit (AND), and N requirement (NR), as well as to compare the stability of these relationships at different vegetative growth stages in Japonica and Indica rice cultivars. Seven multi-locational field experiments using varied N rates and seven rice cultivars were conducted in east China. The results showed that the PNC and chlorophyll meters readings increased with increasing N application rates across the cultivars, growing seasons, and sites. The PNC and chlorophyll meters readings under varied N rates ranged from 2.29 to 3.21, 1.06 to 1.82 and 37.10 to 45.4 and 37.30 to 46.6, respectively, at TL and HD stages for Japonica rice cultivars, while they ranged from 2.25 to 3.23, 1.34 to 1.91 and 35.6 to 43.3 and 37.3 to 45.5 for Indica rice cultivars, respectively. The quantitative relationships between chlorophyll meters readings, PNC, NNI, AND, and NR established at different crop growth stages in two rice ecotypes, were highly significant with R2 values ranging from 0.69 to 0.93 and 0.71 to 0.86 for Japonica and Indica rice, respectively. The strongest relationships were observed for AND and NR at panicle initiation and booting stages in both rice ecotypes. The validation of the relationships developed in the present study with an independent data exhibited a solid model performance and confirmed their robustness as a reliable and rapid diagnostic tool for in-season estimation of plant N parameters for sustainable N management in rice. The results of this study will offer a suitable approach for managing N application precisely during the growth period of the rice crop in intensive rice cropping systems of east China.

Simulation of future global warming scenarios in rice paddies with an open-field warming facility.

To simulate expected future global warming, hexagonal arrays of infrared heaters have previously been used to warm open-field canopies of upland crops such as wheat. Through the use of concrete-anchored posts, improved software, overhead wires, extensive grounding, and monitoring with a thermal camera, the technology was safely and reliably extended to paddy rice fields. The system maintained canopy temperature increases within 0.5°C of daytime and nighttime set-point differences of 1.3 and 2.7°C 67% of the time.