Does the Incorporation of Graphene Oxide into PMMA Influence its Antimicrobial Activity?

INTRODUCTION: The increase in infectious diseases mediated by oral bacteria has been one of the most potent threats to human health, specifically to the elderly. Researchers seek to incorporate antimicrobial nanomaterials into PMMA to control the colonization of microorganisms and reduce deadly diseases. OBJECTIVE: To conduct a systematic review to answer the question: "Does graphene oxide incorporated into polymethylmethacrylate influence its antimicrobial activity?" METHODS: The electronic search was performed in PubMed, Embase, Web of Science, Scopus, and Google Scholar databases, and articles published until October 2021 were selected. The search terms were: ("acrylic resin" OR PMMA) AND (graphene OR "oxide graphene") AND (antimicrobial OR antibacterial OR "anti-infective agent"). The risk of bias analysis of the articles was performed using the quasi-experimental study assessment tool adapted from the JBI. RESULTS: Two hundred and fifty-nine articles were found in the databases. After removing the duplicates, 245 were analyzed by title and abstract. Of these, 06 were selected for full reading, of which 03 met the eligibility criteria and were included in this systematic review. CONCLUSION: This systematic review's findings can infer that the incorporation of graphene in the form of graphene-based coatings to PMMA showed antimicrobial effectiveness.

Effect of silver diamine fluoride on the longevity of the bonding properties to caries-affected dentine.

OBJECTIVES: This study aimed to evaluate the adhesive properties in dentine after the application of silver diamine fluoride (SDF) on carious dentine lesions immediately and after 2 years of water storage. METHODS: 96 human molars used were subjected to artificial dentine caries production, and then randomly divided into 12 experimental groups according to 1. application of an SDF solution (carious dentine lesion without SDF treatment [control], with 12 % silver diamine fluoride [SDF 12 %] or 38 % silver diamine fluoride [SDF 38 %]); 2. Universal adhesives (Clearfil Universal Bond Quick [CUQ] and Single Bond Universal [SBU]); 3. adhesive strategy (etch-and-rinse [ER] and self-etch [SE]). After restoration, the specimens were sectioned and submitted to the microtensile bond strength test (µTBS) and energy-dispersive X-ray spectrometry analysis (SEM/EDX). All tests were performed immediately and after 2 years of water storage. Data from the µTBS were analyzed using four-way ANOVA and Tukey's test (α = 0.05). RESULTS: Only the interaction of factors 'SDF' vs 'time' was significant (p = 0.03). After 2 years of storage, the groups where SDF was applied showed higher µTBS values compared to the control group. No significant decrease in µTBS values was observed for SBU when comparing immediate and 2-year results, but a significant reduction in µTBS values was observed after 2 years for CUQ. CONCLUSION: Independent of the adhesive strategy, the use of SDF may be a promising alternative to maintain the bonding of universal adhesives to carious dentinal lesions. CLINICAL SIGNIFICANCE: This study may clarify and support clinicians regarding the longevity of resin-based restoration in caries-affected dentine treated with silver diamine fluoride.

Demographic structure across all known populations of the rheophyte Dyckia brevifolia Baker (Bromeliaceae) in the Itajaí-Açu River, Southern Brazil.

Understanding the distribution and demographic structure of populations is essential for species conservation. In Brazil, the rheophyte group has been greatly affected by the construction of hydroelectric dams. All know populations of Dyckia brevifolia Baker along Itajaí-Açu River were studied. The plants were classified as seedlings, immature or reproductive rosettes. In addition, the number of dead rosettes, except for seedlings, was determined in five populations of D. brevifolia. The total number of rosettes per population ranged from 273 to 7,185, totaling 30,443 rosettes, and 1,789 seedlings (5.9%). Only 2.4% of rosettes occurred isolated and 97.6% occurred clumped into 2,254 clumps. The number of rosettes per clump ranged from two to 339 rosettes. The percentage of reproductive rosettes per population ranged from 7.8 to 26.7%. The correlation between the number of clumps or between the total number of rosettes and the area of occupation was significant and positive (r = 0.82; P < 0.05). The production of offshoots (1-4) occurred on immature and reproductive rosettes. Dyckia brevifolia has herbivory by Hydrochaeris hydrochaeris (capybara). These rosettes die or often resprout, emitting from 1 to 20 shoots. The populations did not present a pattern of distribution of rosettes in the diametric classes, but in all populations a decrease in the number of rosettes can be observed in the classes with the largest diameter. The small area of occupation (9,185 m2) showed high environmental specificity and vulnerable to habitat loss and environmental changes. Therefore, the maintenance these sites is essential for the long-term conservation of D. brevifolia.

Denture Adhesives Associated with Silver Vanadate: Antimicrobial Approach Against Multi- Species Biofilms on Acrylic Resin Surfaces.

Alternatives have been sought to add an antimicrobial property to denture adhesives. This study evaluated the antimicrobial potential of adhesives associated with nanostructured silver vanadate decorated with silver nanoparticles (ß-AgVO3). Specimens in acrylic resin were treated with the adhesives associated with ß-AgVO3 (1%, 2.5%, 5% and 10%). As control, specimens treated only with Ultra Corega Cream (UCC) or Ultra Corega Powder (UCP) adhesive were used. Multispecies biofilm of Candida albicans, Candida glabrata, Streptococcus mutans and Staphylococcus aureus was evaluated by counting colony forming units per milliliter (CFU/mL), colorimetric assay and fluorescence microscopy. The data were analyzed using the two-way analysis of variance (ANOVA) and Bonferroni multiple comparisons test (α=0.05). For both adhesives, a small amount of ß-AgVO3 (1%) completely inhibited S. mutans (P⟨0.05). For the other microorganisms, there was a reduction in metabolic activity and complete inhibition in the groups with intermediate or greater amounts of nanomaterial (P⟨0.05), except for C. albicans, which was reduced (P⟨0.05) but not completely inhibited in UCP. Microscopy that showed less biofilm in the groups with ß-AgVO3 and in the UCC than UCP. Denture adhesives in powder and cream form with ß-AgVO3 showed potential antimicrobial activity against multispecies biofilm. Powder adhesive showed higher biofilm formation.

Color Match of a Universal-shade Composite Resin for Restoration of Non-carious Cervical Lesions: An Equivalence Randomized Clinical Trial.

PURPOSE: The objective of this double-blind, split-mouth, randomized clinical trial was to evaluate the color match of a single-shade composite resin Admira Fusion X-tra in comparison with a multi-shade composite resin Admira Fusion in non-carious cervical lesion restorations (NCCLs). METHODS AND MATERIALS: One hundred and twenty restorations were performed on NCCLs with two restorative materials (n=60). After prophylaxis, the teeth were isolated with a rubber dam, and one universal adhesive was applied in the selective enamel etching strategy. For both groups, the restorations were inserted incrementally and light-cured. The values of the coordinates L*, a*, and b* in the cervical third before vs after the restorations and cervical vs middle third after the restorations were evaluated using a digital spectrophotometer after the coordinate values were used to calculate the CIEDE (ΔE00). The restorations were evaluated at baseline and after 7 days of clinical performance according to the FDI criteria. Statistical analysis was performed using the Chi-square test for all parameters. Color change was analyzed by Student t-test for paired samples (α=0.05). RESULTS: All restorations were evaluated after 7 days. Regarding the color measurement, no significant difference was observed when Admira Fusion was compared to Admira Fusion X-tra for any of the comparisons performed (p>0.05). However, the values of ΔE00 in the cervical third before vs after the restorations were higher when compared with ΔE00 observed when the cervical vs middle third after restorations were compared. All restorations received the score "clinically very good" after 7 days for all outcomes, including the subjective color match, when evaluated for FDI criterion. CONCLUSIONS: The single-shade composite resin used achieves the same color match when compared to a multi-shade composite resin after 7 days in NCCLs.

Zirconia Implants Produced by Additive Manufacturing - A Scoping Review.

INTRODUCTION: Additive manufacturing is a tool with potential use in medicine and dentistry. The manufacture of metals and composites is already advanced, however, concerns about titanium hypersensitivity, tissue staining, and corrosion caused by gradual material degradation encourage research into more biocompatible alternatives. OBJECTIVE: This systematic scoping review aimed to gather studies that evaluated zirconia implants produced by additive manufacturing to describe the current stage of the printing technique and the final product. METHODS: Searches in Embase, PubMed, SCOPUS, Web of Science, and Google Scholar databases were enriched with manual searches between February and March 2021 and updated in June 2022 using keywords: zirconium implants, zirconium oxide, additive manufacturing, rapid prototyping, 3D printing, selective laser melting, and electron beam melting. The criteria included studies that evaluated or described zirconia implants obtained by 3D printing, with a direct relationship to dentistry or orthopedics. RESULTS: The database search resulted in 671 articles. Eight articles were selected for full reading and remained in this systematic review. CONCLUSION: The printing technique for zirconia implants is promising. However, further studies are required before implants produced by the printing technique can be tested clinically. The literature with results regarding the impression product is still limited.

Prolonged application time effects on universal adhesives in non-carious cervical lesions: An 18-month split mouth randomized clinical trial.

OBJECTIVE: This double-blind, split mouth randomized clinical trial aimed to assess the clinical performance of Clearfil Universal Bond Quick (CBUq) universal adhesive under different application times (no waiting and waiting) compared to Clearfil SE Bond adhesive in non-carious cervical lesions (NCCLs) over 18 months. METHODS: One hundred and eighty-three restorations were distributed randomly into three groups based on the adhesive system and waiting time: CUBq without waiting time (CUBq-NW), CUBq with a 20 s waiting time (CUBq-W), and CSE with a 20 s waiting time. After placement, restorations were evaluated after 18 months using the International Dental Federation (FDI) and United States Public Health Service (USPHS) criteria. Statistical analyses involved Friedman repeated measures analysis of variance and Wilcoxon tests, with a significance level set at 5 %. RESULTS: Over the 18-month period, no restorations were lost across the tested groups. Marginal adaptation evaluation indicated minor discrepancies in 21 restorations (8 CUBq-NW, 6 CUBq-W, and 7 CSE). There were no significant differences observed among the three groups following the 18-month clinical assessment (p > 0.05). Only two restorations showed marginal discoloration after 18 months (1 CUBq-NW and 1 CSE). CONCLUSIONS: The application of Clearfil Universal Bond Quick using either the "waiting" or "no-waiting" technique exhibited excellent clinical results in NCCLs during the 18-month follow-up period, demonstrating comparable performance to Clearfil SE Bond in all assessed outcomes. CLINICAL SIGNIFICANCE: The findings suggest that the new universal adhesive applied using the no-waiting technique demonstrates promising clinical performance when compared to conventional application methods. TRIAL REGISTRATION: ClinicalTrials.gov identifer RBR-69p7mpr.

Factors that Affect the Shear Bond Strength of Pit and Fissure Sealants to Tooth Structure: A Systematic Review.

INTRODUCTION: Pit and fissure sealants are effective in preventing caries disease, however, they may present flaws that damage the physical barrier leading to treatment failure. OBJECTIVE: To answer the question ''Do pit and fissure sealants present good adhering to the dental structure when analyzed by their resistance to shear/microshear?". METHODS: This systematic review followed the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) and was recorded in Open Science Framework. Embase, PubMed, SCOPUS, and Web of Science databases were used for the search strategy. The articles were selected according to the eligibility criteria. The risk of bias was performed with the adaptation of the quasi-experimental studies tool by Joanna Briggs Institute (JBI). RESULTS: 1245 studies were found in the databases when applying the search strategy, after removal of duplicates 881 were evaluated and 44 were selected. After applying the JBI tool, 30 studies presented low risk and 15 moderate risk of bias. Meta-analysis was not possible to performed due to the heterogeneity of the studies. CONCLUSION: The adhesion is dependent on the application protocol, and among the protocols evaluated, conditioning with 37% phosphoric acid for 60 seconds and contamination of the substrate, as these can affect sealant adhesion.

Bleaching Gels Used After 1 Week of Mixing: Efficacy, Hydrogen Peroxide Penetration, and Physical-chemical Properties.

OBJECTIVES: This in vitro study aimed to evaluate the bleaching efficacy (BE), hydrogen peroxide penetration into the pulp chamber (HPP), and physical-chemical properties (concentration, pH, and viscosity) of in-office bleaching gels immediately and after 1 week of mixing. METHODS AND MATERIALS: We randomly divided 49 premolars into seven groups: control (no bleaching) and the following in-office bleaching (Opalescence Boost 40%, Total Blanc One Step 35%, and Whiteness HP Blue 35%) applied at two storage times: immediately and after 1 week. We evaluated the BE using a digital spectrophotometer and the HPP through UV-Vis spectroscopy. We measured the initial concentration, pH, and viscosity using titration, a Digital pH meter and Rheometer, respectively. For statistical analysis, we used a twoway analysis of variance and Tukey and Dunnet tests (α=0.05). RESULTS: We observed higher BE and HPP for Opalescence Boost and Total Blanc One Step after 1 week of mixing than for Whiteness HP Blue (p<0.001). We observed a significantly lower initial concentration for Whiteness HP Blue 1 week after mixing compared to immediately (p=0.00001). All bleaching gels showed a decrease in pH after 1 week of mixing (p=0.00003). However, Total Blanc One Step had a lower pH at both evaluation times (p<0.001). Only Opalescence Boost maintained viscosity 1 week after mixing. CONCLUSIONS: Opalescence Boost was the only bleaching gel able to keep bleaching efficacy, with the same characteristics of permeability and physical- chemical properties after 1 week of mixing.

Pathogenic SCN2A variants cause early-stage dysfunction in patient-derived neurons.

Pathogenic heterozygous variants in SCN2A, which encodes the neuronal sodium channel NaV1.2, cause different types of epilepsy or intellectual disability (ID)/autism without seizures. Previous studies using mouse models or heterologous systems suggest that NaV1.2 channel gain-of-function typically causes epilepsy, whereas loss-of-function leads to ID/autism. How altered channel biophysics translate into patient neurons remains unknown. Here, we investigated iPSC-derived early-stage cortical neurons from ID patients harboring diverse pathogenic SCN2A variants [p.(Leu611Valfs*35); p.(Arg937Cys); p.(Trp1716*)] and compared them with neurons from an epileptic encephalopathy (EE) patient [p.(Glu1803Gly)] and controls. ID neurons consistently expressed lower NaV1.2 protein levels. In neurons with the frameshift variant, NaV1.2 mRNA and protein levels were reduced by ~ 50%, suggesting nonsense-mediated decay and haploinsufficiency. In other ID neurons, only protein levels were reduced implying NaV1.2 instability. Electrophysiological analysis revealed decreased sodium current density and impaired action potential (AP) firing in ID neurons, consistent with reduced NaV1.2 levels. In contrast, epilepsy neurons displayed no change in NaV1.2 levels or sodium current density, but impaired sodium channel inactivation. Single-cell transcriptomics identified dysregulation of distinct molecular pathways including inhibition of oxidative phosphorylation in neurons with SCN2A haploinsufficiency and activation of calcium signaling and neurotransmission in epilepsy neurons. Together, our patient iPSC-derived neurons reveal characteristic sodium channel dysfunction consistent with biophysical changes previously observed in heterologous systems. Additionally, our model links the channel dysfunction in ID to reduced NaV1.2 levels and uncovers impaired AP firing in early-stage neurons. The altered molecular pathways may reflect a homeostatic response to NaV1.2 dysfunction and can guide further investigations.

Prevention of Caries in Cancer Patients: A Systematic Review on the Effectiveness of Dental Materials.

This study aims to identify dental materials and their effectiveness in preventing caries in patients after chemotherapy and radiotherapy for the head and neck. The electronic search was performed in PubMed, Science Direct, Embase and Scopus. All 653 articles found passed through a double-blinded screening process. The exclusion of articles by reading titles and abstracts selected 16 articles for full reading, of which 4 were included into the study. A risk of bias analysis for non-randomized and randomized articles was performed using respectively the ROBINS I and ROB II tools. The data extraction suggested that the casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), in association with fluorine, is able to form harder surfaces compared to the control group, the intraoral fluoride-releasing system (IFRS) effectiveness is similar to the fluorine in gel and a mouthwash composed of natural enzymes (Oral7) did not demonstrate effectiveness in the prevention dental caries. New randomized controlled clinical trials are necessary to evaluate the effectiveness of prevention when applying dental materials in patients after treatment of head and neck cancer.

Evaluation of Different Protocols with 4% Hydrogen Peroxide in Bleaching Efficacy and Tooth Sensitivity - A Single-blind, Randomized Clinical Trial.

OBJECTIVES: To compare the bleaching efficacy and tooth sensitivity (TS) of 4% hydrogen peroxide (HP) in adults using a continuous or fractioned protocol. METHODS AND MATERIALS: A single-blind randomized controlled trial with a parallel design was conducted. Eighty-six patients with upper canines A2 or darker were submitted to bleaching with 4% HP gel for three weeks after random allocation into the fractioned protocol (two 30-minute daily applications) or continuous protocol (single one-hour application). We evaluated the color change at baseline, weekly, and 30 days after the bleaching using Vita Classical and Vita Bleachedguide using the units of shade guides (SGU) and by spectrophotometer using CIELab 1976 (ΔEab) and CIEDE 2000 formulas (ΔE00), as well as Whiteness Index (ΔWID). We assessed the absolute risk of TS with a visual analog scale (VAS) and numeric rating scale (NRS). Color changes in each recall were compared with the Student t-test. The risk of TS was evaluated by the Chi-square test, and the intensity by Mann-Whitney test (NRS) and Student t-test (VAS). RESULTS: The mean difference for the ΔSGU Vita Classical (0.5; 95% CI: -0.5 to 1.5), ΔSGU Vita Bleachedguide (-0.4; 95% CI: -1.5 to 0.7), ΔEab (1.4; 95% CI: -0.1 to 2.9), ΔE00 (0.6; 95% CI: -0.4 to 1.6), and ΔWID (-3.2; 95% CI: -7.3 to 0.9) after three weeks of bleaching was not clinically or statistically significant (p>0.10). The absolute risk of TS was 44% (95% CI: 30-58%) and 46% (95% CI: 32-61%) in the fractioned and continuous protocols, respectively (RR=1.0; 95% CI: 0.6 to 1.5; p>0.91). CONCLUSION: A fractioned bleaching protocol with 4% HP (30 minutes twice daily) did not increase the whitening degree nor affect the risk and intensity of TS when compared with the one-hour continuous protocol.

Application Tip and Concentration of a Self-mixing Bleach: Hydrogen Peroxide Inside the Pulp Chamber, Color Change, and Amount of Bleaching Gel Used.

PURPOSE: The objective of this study was to evaluate if the application method (tip with brush or tip without brush) and hydrogen peroxide (HP) concentration (6% or 35% self-mixing) of in-office bleaching gel influences the penetration of HP into the pulp chamber, color change, and the amount of bleaching gel used. METHODS: Forty healthy premolars were randomly divided into the following five groups (n=8): no treatment; HP6% using a tip with a brush, HP6% using a tip without a brush, HP35% using a tip with a brush, and HP35% using a tip without a brush. After treatments, the HP concentration (µg/mL) within the pulp chamber was determined using UV-Vis spectrophotometry. The color change (ΔEab, ΔE00, and ΔWID) was evaluated using a digital spectrophotometer. The amount of gel used (g) in each group was measured using a precision analytical balance. Data from each test were submitted to parametric tests (α=0.05). RESULTS: The tip with a brush resulted in a lower amount of HP inside the pulp chamber and less gel used when compared with the tip without a brush, regardless of HP concentration (p<0.05). However, regarding the tip used, although no significant difference was observed when HP35% was used (p>0.05), a higher whitening effect was observed when the 6% HP was applied without a brush as opposed to with a tip brush (p<0.05). CONCLUSIONS: The use of a tip with a brush, regardless of the in-office bleaching gel concentration (6% or 35% self-mixing), presented a lower penetration and lower volume of spent gel when compared to a tip without brush. However, the whitening effect depended on the concentration of HP used.

Some Myths in Dentin Bonding: An Evidence-Based Perspective.

Laboratory investigations are essential models responsible for science development. However, laboratory discoveries must be confirmed in a clinical environment where many known and unknown variables and complex mechanisms are involved. Using conclusions from laboratory studies to make clinical recommendations can lead to widespread "unreliable truths" or so-called myths in any field of knowledge. These myths may increase the costs (financial and time) or even cause harm (side effects) that would be unnecessary, given that the current protocol or conduct was previously evaluated in a more complex and complete clinical setting. This article will discuss certain myths in dentin bonding that may influence clinical decision-making, bringing some principles of evidence-based practice to allow a more critical evaluation of the literature findings.

ConectAR: Collaborative network of patients with asthma and carers actively involved in health research: a protocol for patient and public involvement.

Summary: Background. Patients and Public Involvement in every stage of the patient-centered health research cycle is the key to the development of innovative solutions with an impact on patients' care. Methods. This protocol describes the development of ConectAR, a network to promote the involvement of patients with asthma and their carers in the health research cycle. Results. This protocol comprehends 4 tasks: 1) define the mission, vision, governance and activities of the network through focus groups; 2) establish the communication strategy and tools; 3) test the feasibility of the network in a Delphi study on the research priorities for asthma in Portugal; 4) coordination and dissemination activities. Conclusions. This network will improve research by ensuring that patients and carers have an active role in the co-creation of impactful solutions for asthma.

Surface Characteristics and Microbial Adhesion in Polymethylmethacrylate for Denture Base Submitted to Antimicrobial Agents and Cleaning Agents: A Systematic Review.

This review aimed to identify the influence of antimicrobial and cleaning agents on surface characteristics such as surface free energy (SFE) and wettability, and microbial adhesion in polymethylmethacrylate (PMMA) for denture base. The review question, based on PICO, was: "Does intervention with antimicrobial and cleaning agents in PMMA influence the surface free energy, wettability, and consequently the microbial adhesion?" and the protocol was registered in Open Science Framework (osf. io/v3xgn). The search was performed in PubMed, Lilacs, Embase, Scopus, and Science Direct databases, using the terms: ("acrylic resin" OR PMMA) AND (antimicrobial OR antibacterial) AND ("electrostatic interaction" OR surface free energy) AND (biofilm OR "bacteria adhesion"), and resulted in 462 articles, of which 7 were included. The antimicrobials polypara-xylylene, carboxybetaine methacrylate, ethylene glycol methacrylate phosphate, and deposition of F and Ag ions in PMMA influenced the SFE and wettability. Denture cleaners reduced microbial adhesion. Five of the included studies evaluated the microbial adhesion, however, only two observed a direct relationship between SFE, wettability, and microbial adhesion. It was concluded that the intervention with antimicrobial and cleaning agents in PMMA can interfere in SFE and surface wettability, but no correlation was observed between microbial adhesion and these surface characteristics in PMMA.

Hydrogen peroxide is involved in drought stress long-distance signaling controlling early stomatal closure in tomato plants.

It has long been hypothesized that hydrogen peroxide (H2O2) may play an essential role in root-to-shoot long-distance signaling during drought conditions. Thus, to better understand the involvement of H2O2 in drought signaling, two experiments were carried out using tomato plants. In the first experiment, a split-root scheme was used, while in the second experiment, the tomato plants were grown in a single pot and subjected to drought stress. In both experiments, H2O2 and catalase were applied together with irrigation. Control plants continued to be irrigated according to the water loss. In the split-root experiment, it was verified that the application of H2O2 to roots induced a clear reduction in plant transpiration compared to untreated or catalase-treated plants. In the second experiment, we observed that H2O2-treated plants exhibited similar transpiration when compared to untreated and catalase-treated plants under drought stress. Similarly, no difference in water use efficiency was observed. Thus, we conclude that the increase in H2O2 in the root system can act as a long-distance signal leading to reduced transpiration even when there is no water limitation in the shoot. But it has little effect when there is a reduction in the shoot water potential.

At-home Bleaching with a Novel Carbamide Peroxide Polymeric Nanoparticle Gel: A Multicenter Randomized Controlled Trial.

OBJECTIVES: To compare the risk and intensity of tooth sensitivity (TS) as well the effectiveness of at-home bleaching using two carbamide peroxide bleaching gels, specifically a novel polymeric nanoparticle gel (experimental) and a commercial gel (Opalescence PF, Ultradent, South Jordan, Utah, USA), applied at two application times. METHODS: This multicenter, triple-blind, and split-mouth randomized controlled trial was conducted on 80 healthy adults with canine teeth that were shade A2 or darker. The participants all used the experimental and the control gels on one side of a tray, depending on the group to which they were allocated, for 30 or 60 minutes per day over four weeks. The absolute risk and intensity of TS were assessed daily using the five-point Numeric Rating Scale and the 0-10 Visual Analogue Scale. Color change was evaluated with shade guide units (ΔSGU) and a digital spectrophotometer (ΔEab, ΔE00, and ΔWid) at baseline and 30 days postbleaching. The risk and intensity of TS was evaluated by the McNemar and the Wilcoxon signed-rank tests, respectively. Color change (ΔSGU, ΔEab, ΔE00, and ΔWid) was evaluated by Mann-Whitney and paired t-tests (α=0.05). RESULTS: No differences in the risk and intensity of TS were observed based on the bleaching gels used and the times of application (p>0.05). Thirty days after bleaching, there was no significant difference in color change, in terms of the bleaching gels used or the application times (p>0.05). CONCLUSION: The novel carbamide peroxide polymeric nanoparticles gel, when applied for 30 or 60 minutes, produced effective color change and a low rate of tooth sensitivity, as compared to the control group.

Influence of Irradiance and Exposure Times on the Mechanical and Adhesive Properties of Universal Adhesives with Dentin.

OBJECTIVES: This study evaluated the influence of irradiance/exposure time on the Knoop hardness (KHN) and polymer cross-linking density (PCLD), as well as microtensile bond strength (µTBS), nanoleakage (NL), and in situ degree of conversion (DC) of universal adhesives. METHODS AND MATERIALS: Two universal adhesive systems, Clearfil Universal Bond Quick (CUQ) and Scotchbond Universal Adhesive (SBU), were light-cured using various irradiance/exposure times: 1400 mW/cm2 for 5 s (1400*5); 1400 mW/cm2 for 10 s (1400*10); 3200 mW/cm2 for 5 s (3200*5); and 3200 mW/cm2 for 10 s (3200*10). Adhesive disks from each group were used to measure PCLD by KHN. One hundred and twenty-eight human molars were randomly assigned to 16 groups according to the following variables: adhesive system vs adhesive strategies vs radiance/exposure times. After restoration, specimens were sectioned into resin-dentin sticks and tested for µTBS, NL, and DC. The data from PCLD (%), KHN, µTBS (MPa), NL (%), and DC (%) data were subjected to ANOVA and Tukey's test (α=0.05). RESULTS: Significant reductions in KHN, µTBS, and DC (p=0.00001) values and an increase in NL and PCLD (p=0.00001) values were observed for 3200*10 when compared with other groups. Higher KHN, µTBS, and DC (p=0.000001) values were observed for 3200*5 in comparison with the other groups. The 1400*5 (7 J/cm2) and 1400*10 (14 J/cm2) groups showed intermediate values (p=0.000001). CONCLUSION: Although similar results in terms of hardness, polymer cross-linking density and nanoleakage were observed when 5 seconds at 3200 mW/cm2 and 10 seconds at 1400 mW/cm2 groups were compared, the use of higher irradiance (3200 mW/cm2) for only 5 seconds showed better results in terms of bond strength and degree of conversion for both universal adhesives to dentin. The prolonged exposure time (10 seconds) at the higher irradiance (3200 mW/cm2) showed the worst results.

Combined Bleaching Technique Versus At-home Bleaching-A Single-blind Randomized Controlled Trial.

OBJECTIVE: To compare the efficacy, color stability, and tooth sensitivity (TS) of combined bleaching, using a modified protocol with at-home bleaching. METHODS: Eighty participants were randomized into two groups. In the combined group, a desensitizing gel was applied (10 minutes) prior to in-office bleaching (35% hydrogen peroxide (H2O2), 2×15 minute applications) and at-home bleaching (4% H2O2, 2×30 minutes for 21 days) started the next day. In the at-home group, only the at-home bleaching was performed. Color was recorded at the beginning and postbleaching with two scales (VITA Classical and Bleachedguide) and Easyshade spectrophotometer. The TS was recorded daily with a 0-10 visual analogue scale (VAS) and five-point numeric rating scale (NRS). RESULTS: A 40% lower risk (RR=1.4; 95% CI 1.1-1.9) was observed in the at-home group. Higher color change and intensity of TS [mean difference 2.3 (95% CI 1.3-3.3) in the VAS] was observed in the first week for the combined group. After the end of the protocol, a bleaching degree was detected for both groups, with no significant difference between both groups (p>0.05). CONCLUSION: The combined group produced a slightly higher degree of color change than at-home bleaching but with a higher risk and intensity of TS.