Covalently and ionically, dually crosslinked chitosan nanoparticles block quorum sensing and affect bacterial cell growth on a cell-density dependent manner.

In our efforts to improve the quality and stability of chitosan nanoparticles (NPs), we describe here a new type of chitosan NPs dually crosslinked with genipin and sodium tripolyphosphate (TPP) that display quorum quenching activity. These NPs were created using a simplified and robust procedure that resulted in improved physicochemical properties and enhanced stability. This procedure involves the covalent crosslinking of chitosan with genipin, followed by the formation of chitosan NPs by ionic gelation with TPP. We have optimized the conditions to obtain genipin pre-crosslinked nanoparticles (PC-NPs) with positive ς-potential (~ +30 mV), small diameter (~130 nm), and low size distributions (PdI = 0.1-0.2). PC-NPs present physicochemical properties that are comparable to those of other dually crosslinked chitosan NPs fabricated with different protocols. In contrast to previously characterized NPs, however, we found that PC-NPs strongly reduce the acyl homoserine lactone (AHL)-mediated quorum sensing response of an Escherichia coli fluorescent biosensor. Thus, PC-NPs combine, in a single design, the stability of dually crosslinked chitosan NPs and the quorum quenching activity of ionically crosslinked NPs. Similar to other chitosan NPs, the mode of action of PC-NPs is consistent with the existence of a "stoichiometric ratio" of NP/bacterium, at which the positive charge of the NPs counteracts the negative ς-potential of the bacterial envelope. Notably, we found that the time of the establishment of the "stoichiometric ratio" is a function of the NP concentration, implying that these NPs could be ideal for applications aiming to target of bacterial populations at specific cell densities. We are confident that our PC-NPs are up-and-coming candidates for the design of efficient anti-quorum sensing and a new generation antimicrobial strategies.

Effect of the ultrastructure of chitosan nanoparticles in colloidal stability, quorum quenching and antibacterial activities.

We have fabricated two types of crosslinked chitosan-based nanoparticles (NPs), namely (1) ionically crosslinked with tripolyphosphate (TPP), designated as IC-NPs and (2) dually co-crosslinked (ionically and covalently with TPP and genipin, respectively) termed CC-NPs. The two types of NPs were physichochemically characterized by means of DLS-NIBS, synchrotron SAXS and M3-PALS (zeta potential). First, we found that covalent co-crosslinking of ionically pre-crosslinked nanoparticles yielded monodisperse CC-NPs in the size range of ∼200 nm, whereas the parental IC-NPs remained highly polydisperse. While both types of chitosan nanoparticles displayed a core-shell structure, as determined by synchrotron SAXS, only the structure of CC-NPs remained stable at long incubation times. This enhanced structural robustness of CC-NPs was likely responsible of their superior colloidal stability even in biological medium. Second, we explored the antimicrobial and quorum sensing inhibition activity of both types of nanoparticles. We found that CC-NPs had lower long-term toxicity than IC-NPs. In contrast, sub-lethal doses of IC-NPs consistently displayed higher levels of quorum quenching activity than CC-NPs. Thus, this work underscores the influence of the NP's ultrastructure on their colloidal and biological properties. While the cellular and molecular mechanisms at play are yet to be fully elucidated, our results broaden the spectrum of use of chitosan-based nanobiomaterialsin the development of antibiotic-free approaches against Gram-negative pathogenic bacteria.

Microencapsulated chitosan nanoparticles for pulmonary protein delivery: in vivo evaluation of insulin-loaded formulations.

This work presents a new dry powder system consisting of microencapsulated protein-loaded chitosan nanoparticles (CS NPs). The developed system was evaluated in vivo in rats in order to investigate its potential to transport insulin (INS), a model protein, to the deep lung, where it is absorbed into systemic circulation. The INS-loaded CS NPs were prepared by ionotropic gelation and characterized for morphology, size, zeta potential, association efficiency and loading capacity. Afterwards, the NPs were co-spray dried with mannitol resulting in a dry powder with adequate aerodynamic properties for deposition in deep lungs. The assessment of the plasmatic glucose levels following intratracheal administration to rats revealed that the microencapsulated INS-loaded CS NPs induced a more pronounced and prolonged hypoglycemic effect compared to the controls. Accordingly, the developed system constitutes a promising alternative to systemically deliver therapeutic macromolecules to the lungs, but it can also be used to provide a local effect.

Glucomannan, a promising polysaccharide for biopharmaceutical purposes.

Over the last few decades, polysaccharides have gained increasing attention in the biomedical and drug delivery fields. Among them, glucomannan (GM), has become a particularly attractive polymer. In this paper, we review the physicochemical and biological properties which are decisive for the exploitation of GM as a biomaterial. These properties include the structural organization, molecular weight, solubility, viscosity, gelling properties and degradation behavior. Moreover, herein we analyze the possibilities of combining GM with other hydrophilic polymers, as well as the preparation of semisynthetic derivatives of GM, which may be of interest in the pharmaceutical context. Finally, we discuss the specific applications of GM in the drug delivery field.

Development of phosphorylated glucomannan-coated chitosan nanoparticles as nanocarriers for protein delivery.

The aim of the present work was to develop a new nanoparticle carrier, adapted for the oral administration of proteins and their delivery to the immune system. Chitosan and phosphorylated glucomannan were chosen as major constituents of the nanoparticles. Chitosan nanoparticles were formed by ionic gelation and then coated with glucomannan. Two different protocols were adopted for the formation of the glucomannan coating: protocol I, in which chitosan nanoparticles were isolated before their coating; protocol II, in which chitosan nanoparticles were not isolated, but coated with glucomannan in the presence of free chitosan. The results showed that, under the selected formulation conditions, the sizes of the nanoparticles ranged between 170 and 300 nm and their zeta potential values were inverted from positive to negative by the glucomannan coating. The nanoparticles prepared by the two protocols could be freeze-dried, in the presence or absence of cryoprotective agents, preserving their original characteristics. The results of the stability study evidenced the positive role of the glucomannan coating in preventing the aggregation of the nanoparticles in buffered media. Finally, the association of the inmunomodulatory protein complex P1 to the chitosan-glucomannan nanoparticles was investigated. The results showed that the association was not dependent on the chitosan: sodium tripoliphosphate ratio, but it was significantly affected by the presence of sodium phosphate in the protein structure.

Reacetylated chitosan microspheres for controlled delivery of anti-microbial agents to the gastric mucosa.

The high aqueous solubility of chitosan restricts the utility of chitosan microspheres for gastric drug delivery. This paper describes the preparation of reacetylated chitosan microspheres with suitable properties for the controlled release of active anti-microbial agents, such as amoxycillin and metronidazole, in the gastric cavity. Two different microencapsulation approaches were developed and optimized in order to encapsulate hydrophilic (amoxycillin) and hydrophobic (metronidazole) compounds efficiently. The reacetylated chitosan microspheres exhibited a controlled water swelling capacity and gelified at acidic pH, resulting in prolonged release of the encapsulated antibiotics. The reacetylation time was found to be a key factor that affects not only drug release, but also encapsulation efficiency and anti-microbial activity of the encapsulated compound. The last two parameters were also dependent on drug solubility in the reacetylating agent. Using short reacetylation time periods, it was possible to efficiently control the release of both hydrophilic and lipophilic antibiotics while maintaining their activity against different bacteria. Consequently, reacetylated chitosan microspheres are promising vehicles for the controlled delivery of anti-microbial agents to the gastric cavity and, hence, for the eradication of Helicobacter pylori, a pathogen strongly associated with gastric ulcers and possibly gastric carcinoma.

Enhancement of nasal absorption of insulin using chitosan nanoparticles.

PURPOSE: To investigate the potential of chitosan nanoparticles as a system for improving the systemic absorption of insulin following nasal instillation. METHODS: Insulin-loaded chitosan nanoparticles were prepared by ionotropic gelation of chitosan with tripolyphosphate anions. They were characterized for their size and zeta potential by photon correlation spectroscopy and laser Doppler anemometry, respectively. Insulin loading and release was determined by the microBCA protein assay. The ability of chitosan nanoparticles to enhance the nasal absorption of insulin was investigated in a conscious rabbit model by monitoring the plasma glucose levels. RESULTS: Chitosan nanoparticles had a size in the range of 300-400 nm, a positive surface charge and their insulin loading can be modulated reaching values up to 55% [insulin/nanoparticles (w/w): 55/100]. Insulin association was found to be highly mediated by an ionic interaction mechanism and its release in vitro occurred rapidly in sink conditions. Chitosan nanoparticles enhanced the nasal absorption of insulin to a greater extent than an aqueous solution of chitosan. The amount and molecular weight of chitosan did not have a significant effect on insulin response. CONCLUSIONS: Chitosan nanoparticles are efficient vehicles for the transport of insulin through the nasal mucosa.

Design and evaluation of chitosan/ethylcellulose mucoadhesive bilayered devices for buccal drug delivery.

This paper describes the preparation of new buccal bilayered devices comprising a drug-containing mucoadhesive layer and a drug-free backing layer, by two different methods. Bilaminated films were produced by a casting/solvent evaporation technique and bilayered tablets were obtained by direct compression. The mucoadhesive layer was composed of a mixture of drug and chitosan, with or without an anionic crosslinking polymer (polycarbophil, sodium alginate, gellan gum), and the backing layer was made of ethylcellulose. The double-layered structure design was expected to provide drug delivery in a unidirectional fashion to the mucosa and avoid loss of drug due to wash-out with saliva. Using nifedipine and propranolol hydrochloride as slightly and highly water-soluble model drugs, respectively, it was demonstrated that these new devices show promising potential for use in controlled delivery of drugs to the oral cavity. The uncrosslinked chitosan-containing devices absorbed a large quantity of water, gelled and then eroded, allowing drug release. The bilaminated films showed a sustained drug release in a phosphate buffer (pH 6.4). Furthermore, tablets that displayed controlled swelling and drug release and adequate adhesivity were produced by in situ crosslinking the chitosan with polycarbophil.

Design of microencapsulated chitosan microspheres for colonic drug delivery.

Among the different approaches to achieve colon-selective drug delivery, the use of polymers, specifically biodegraded by colonic bacteria, holds great promise. In this work a new system which combines specific biodegradability and pH-dependent release is presented. The system consists of chitosan (CS) microcores entrapped within acrylic microspheres. Sodium diclofenac (SD), used as a model drug, was efficiently entrapped within CS microcores using spray-drying and then microencapsulated into Eudragit L-100 and Eudragit S-100 using an oil-in-oil solvent evaporation method. The size of the CS microcores was small (1.8-2.9 microns) and they were encapsulated within Eudragit microspheres (size between 152 and 233 microns) forming a multireservoir system. Even though CS dissolves very fast in acidic media, at pH 7.4, SD release from CS microcores was delayed, the release rate being adjustable (50% dissolved within 30-120 min) by changing the CS molecular weight (MW) or the type of CS salt. Furthermore, by coating the CS microcores with Eudragit, perfect pH-dependent release profiles were attained. No release was observed at acidic pHs, however, when reaching the Eudragit pH solubility, a continuous release for a variable time (8-12 h) was achieved. A combined mechanism of release is proposed, which considers the dissolution of the Eudragit coating, the swelling of the CS microcores and the dissolution of SD and its further diffusion through the CS gel cores. In addition, infrared (IR) spectra revealed that there was an ionic interaction between the amine groups of CS and the carboxyl groups of Eudragit, which provided the system with a new element for controlling the release. In conclusion, this work presents new approaches for the modification of CS as well as a new system with a great potential for colonic drug delivery.

Development of new chitosan-cellulose multicore microparticles for controlled drug delivery.

Chitosan (CS) is a very interesting biomaterial for drug delivery; however its use in oral administration is restricted by its fast dissolution in the stomach and limited capacity for controlling the release of drugs. To address this limitation, a new microparticulate CS controlled release system, consisting of hydrophilic CS microcores entrapped in a hydrophobic cellulosic polymer, such as cellulose acetate butyrate (CAB) or ethyl cellulose (EC) was proposed. These microparticles were obtained with different types of CS and various core/coat ratios, with the particle size in all cases being smaller that 70 microns. Using sodium diclofenac (SD) and fluorescein isothiocyanate-labeled bovine serum albumin (FITC-BSA) as model compounds, the properties of these new microparticles for the entrapment and controlled release of drugs and proteins were investigated. Results showed that the entrapment efficiency of SD was very high irrespective of the processing conditions. Furthermore, for both model compounds (SD and FITC-BSA) it was possible to modulate the in vitro release of the encapsulated molecules by changing the core properties (CS salt, Mw, core/coat ratio) or the coating polymer. The microparticles were stable at low pH and thus, suitable for oral delivery without requiring any harmful cross-linkage treatment.

Chitosan and chitosan/ethylene oxide-propylene oxide block copolymer nanoparticles as novel carriers for proteins and vaccines.

PURPOSE: The aim of this study was to investigate the interaction between the components of novel chitosan (CS) and CS/ethylene oxide-propylene oxide block copolymer (PEO-PPO) nanoparticles and to evaluate their potential for the association and controlled release of proteins and vaccines. METHODS: The presence of PEO-PPO on the surface of the nanoparticles and its interaction with the CS was identified by X-ray photoelectron spectroscopy (XPS). The mechanism of protein association was elucidated using several proteins, bovine serum albumin (BSA), and tetanus and diphtheria toxoids, and varying the formulation conditions (different pH values and concentrations of PEO-PPO), and the stage of protein incorporation into the nanoparticles formation medium. RESULTS: BSA and tetanus and diphtheria toxoids were highly associated with CS nanoparticles partly due to electrostatic interactions between the carboxyl groups of the protein and the amine groups of CS. PEO-PPO also interacted electrostatically with CS, thus competing with the proteins for association with CS nanoparticles. A visible amount of PEO-PPO was projected towards the outer phase of the nanoparticles. Proteins were released from the nanoparticles at an almost constant rate, the intensity of which was closely related to the protein loading. Furthermore, the tetanus vaccine was released in the active form for at least 15 days. CONCLUSIONS: CS and CS/PEO-PPO nanoparticles prepared by a very mild ionic crosslinking technique are novel and suitable systems for the entrapment and controlled release of proteins and vaccines.