Application of"Spinal cord fusion" in spinal cord injury repair and its neurological mechanism.

Spinal cord injury (SCI) is a severely disabling and catastrophic condition that poses significant global clinical challenges. The difficulty of SCI repair results from the distinctive pathophysiological mechanisms, which are characterised by limited regenerative capacity and inadequate neuroplasticity of the spinal cord. Additionally, the formation of cystic cavities and astrocytic scars after SCI further obstructs both the ascending and descending neural conduction pathways. Consequently, the urgent challenge in post-SCI recovery lies in repairing the damaged spinal cord to reconstruct a functional and intact neural conduction circuit. In recent years, significant advancements in biological tissue engineering technology and novel therapies have resulted in a transformative shift in the field of SCI repair. Currently, SCI treatment primarily involves drug therapy, stem cell therapy, the use of biological materials, growth factors, and other approaches. This paper comprehensively reviews the progress in SCI research over the years, with a particular focus on the concept of "Spinal Cord Fusion" as a promising technique for SCI reconstruction. By discussing this important research progress and the neurological mechanisms involved, our aim is to help solve the problem of SCI repair as soon as possible and to bring new breakthroughs in the treatment of paraplegia after SCI.

Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys.

The material undergoes high temperature and high strain rate deformation process during the cutting process, which may induce the dynamic recrystallization behavior and result in the evolution of dynamic mechanical properties of the material to be machined. In this paper, the modified Johnson-Cook (J-C) model for nickel-based powder metallurgy superalloy considering dynamic recrystallization behavior in high strain rate and temperature is proposed. The dynamic mechanical properties of the material under different strain rates and temperature conditions are obtained by quasi-static compression test and split Hopkinson pressure bar (SHPB) test. The coefficients of the modified J-C model are obtained by the linear regression method. The modified model is verified by comparison with experimental and model prediction results. The results show that the modified J-C model proposed in this paper can accurately describe the mechanical properties of nickel-based powder metallurgy superalloys at high temperatures and high strain rates. This provides help for studying the cutting mechanism and finite element simulation of nickel-based powder metallurgy superalloy.

Progress of SARS-CoV-2 Main protease peptide-like inhibitors.

The pneumonia outbreak caused by Severe Acute Respiratory Syndrome 2 (SARS-CoV-2) infection poses a serious threat to people worldwide. Although vaccines have been developed, antiviral drugs are still needed to combat SARS-CoV-2 infection due to the high mutability of the virus. SARS-CoV-2 main protein (Mpro ) is a special cysteine protease that is a key enzyme for SARS-CoV-2 replication. It is encoded by peptides and is responsible for processing peptides into functional proteins, making it an important drug target. The paper reviews the structure and peptide-like inhibitors of SARS-CoV-2 Mpro , also the binding mode and structure-activity relationship between the inhibitors and Mpro are introduced in detail. It is hoped that this review can provide ideas and help for the development of anti-coronavirus drugs such as COVID-19, and help to develop broad-spectrum antiviral drug for the treatment of coronavirus diseases as soon as possible.

Discovery a series of novel inhibitors of human dihydroorotate dehydrogenase: Biological activity evaluation and molecular docking.

Human dihydroorotate dehydrogenase (hDHODH) is a key enzyme that catalyzes the de novo synthesis of pyrimidine. In recent years, various studies have shown that inhibiting this enzyme can treat autoimmune diseases such as rheumatoid arthritis (RA) and cancer. This study designed and synthesized a series of novel thiazolidone hDHODH inhibitors. Through biological activity evaluation, Compound 14 was found to have high inhibitory activity, with an IC50 value reaching nanomolar level. Preliminary structure-activity relationship studies found that the carboxyl group in R1 and the naphthalene in R2 are key factors in improving activity. Through molecular docking, the binding mode between inhibitors and proteins was elucidated. This study provides an important reference for further optimizing hDHODH inhibitors.

[Microsurgical thinned anterolateral thigh perforator flap to repair soft tissue defects of foot and ankle].

OBJECTIVE: To explore method and clinical effect of microsurgical thinned anterolateral thigh perforator flap to repair soft tissue defects of foot and ankle. METHODS: From March 2017 to January 2022, totally 20 patients with soft tissue defects of ankle joint were treated with micro-thinning anterolateral perforator flap for free transplantation, included 13 males and 7 females, aged from 22 to 58 years old with an average of (36.45±12.36) years old. The size of flap ranged from 8.0 cm×5.0 cm to 20.0 cm×12.0 cm. Before operation, perforating vessels on the anterolateral thigh region were detected and marked with a portable Doppler detector. For the defect width less than 8 cm, 11 patients were repaired with a single flap. For the defect width more than 8 cm, the wound could not be sutured directly, and the lobulated flap technique was used in 9 patients, the width was converted to length, and the donor site was closed directly. Under the microscope, all flaps were thinened in a stepwise manner from the center of the pedicle to the periphery. After operation, survival of the flap, the shape, texture, sensory function recovery were observes, and recovery of foot function was evaluated by Maryland foot function evaluation standard. RESULTS: All 20 patients with microsurgical thinned anterolateral thigh perforator flaps were survived. Venous crisis occurred in 1 patient due to subcutaneous hematoma, after removal of the hematoma, the crisis was relieved and the flap survived successfully. The wounds in the donor and recipient sites healed well, and only linear scars left in the donor sites. Twenty patients were followed up for 3 to 26 months after operation, good shape of flaps without bloated, and good texture. The two-point discrimination of free flaps ranged from 9.0 to 16.0 mm, and the protective sensation was restored. The ankle flexion and extension function recovered well and patients could walk normally. According to Maryland foot function evaluation standard, 8 patients got excellent result, 10 patients good and 2 middle. CONCLUSION: Microsurgical thinned anterolateral thigh perforator flap is an ideal method to repair soft tissue defects in functional area of foot and ankle, with good appearance and texture of the flap, no need for re-plastic surgery, reduced hospitalization costs, and less donor site damage.

Asymmetrical effects of renewable energy consumption, financial development, and urbanization on the economic growth of China: does the role of technology matters.

Our paper investigates the association of renewable energy, financial development, urbanization, and growth in China along with technology. The newly developed econometric techniques (asymmetries) have been applied to explore short and long-run nonlinear relation among variables by utilizing annual data for the period of 1965-2021. In nonlinear cointegration, findings highlight the importance of renewable energy consumption for growth and development. Urbanization also confirms a positive association with growth and development where positive shocks were more dominant to support the growth process. The stock of technology brings a positive impact on growth and development whereas financial development results reveal to consider policy carefully. Asymmetric causality supports a uni-directional causal association between renewable energy, financial development, and growth. Policy recommendations are also highlighted according to the results.

Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools.

Introduction: Coating-thickness-dependent physical properties can induce different cutting temperatures with physical vapor deposition (PVD) titanium aluminum nitride (TiAlN) ceramic-coated tools. The determination of the optimal TiAlN coating thickness is important to obtain superior coating physical properties and decrease the cutting temperature of Inconel 718 alloy. Objectives: The present study investigates the effects of coating thickness on the physical properties of TiAlN coatings and the cutting temperature during the machining of Inconel 718 alloy. The optimal coating thickness is also determined. Methods: First, the direct-current-arc method was utilized to deposit PVD Ti0.55Al0.45N coatings with thickness of 1.6 µm, 2 µm, 2.5 µm, and 3 µm, onto a cemented carbide substrate. Second, the coating-thickness-dependent physical properties were characterized and estimated with a radar chart. Third, the effects of coating thickness on coating antifriction were analyzed with the tool-chip friction coefficient when cutting Inconel 718 with PVD TiAlN coated tools. Both the maximum cutting temperature generated in the chip and the cutting temperature of the tool bodies were measured for analyzation of the thermal barrier effect of coating. Finally, the topographies of the deformed chip and tool-chip contact area were obtained and investigated to determine the effects of coating thickness on the cutting temperature. Results: The tool-chip friction coefficient and coating thermal barrier effect were affected by the coating thickness. Ti0.55Al0.45N coated tools with moderate coating thickness had fine antifriction effect with Inconel 718. The thermal barrier effect of Ti0.55Al0.45N coating was positively related to the coating thickness. Conclusions: The optimal TiAlN coating thickness was determined as 2 µm, which resulted in superior physical properties and reduced the cutting temperature of Inconel 718.

Partial restoration of spinal cord neural continuity via vascular pedicle hemisected spinal cord transplantation using spinal cord fusion technique.

AIMS: Our team tested spinal cord fusion (SCF) using the neuroprotective agent polyethylene glycol (PEG) in different animal (mice, rats, and beagles) models with complete spinal cord transection. To further explore the application of SCF for the treatment of paraplegic patients, we developed a new clinical procedure for SCF called vascular pedicle hemisected spinal cord transplantation (vSCT) and tested this procedure in eight paraplegic participants. METHODS: Eight paraplegic participants (American Spinal Injury Association, ASIA: A) were enrolled and treated with vSCT (PEG was applied to the sites of spinal cord transplantation). Pre- and postoperative pain intensities, neurologic assessments, electrophysiologic monitoring, and neuroimaging examinations were recorded. RESULTS: Of the eight paraplegic participants who completed vSCT, objective improvements occurred in motor function for one participant, in electrophysiologic motor-evoked potentials for another participant, in re-establishment of white matter continuity in three participants, in autonomic nerve function in seven participants, and in symptoms of cord central pain for seven participants. CONCLUSIONS: The postoperative recovery of paraplegic participants demonstrated the clinical feasibility and efficacy of vSCT in re-establishing the continuity of spinal nerve fibers. vSCT could provide the anatomic, morphologic, and histologic foundations to potentially restore the motor, sensory, and autonomic nervous functions in paraplegic patients. More future clinical trials are warranted.

lncRNA DARS-AS1 Promoted Osteosarcoma Progression through Regulating miR-532-3p/CCR7.

Background: lncRNAs have been indicated to involve in cell invasion, proliferation, and metastasis. However, function of DARS-AS1 in osteosarcoma remains poorly explored. Methods: DARS-AS1 and miR-532-3p level were measured using qRT-PCR. CCK-8 assay and cell invasion assay were done to study cell functions. Luciferase reporter assay was performed to study the mechanism about DARS-AS1 and miR-532-3p. Results: We firstly showed that DARS-AS1 expression is upregulated in 73.5% (25/34) of cases with osteosarcoma. Moreover, DARS-AS1 expression is overexpressed in osteosarcoma specimens than in nontumor samples. The DARS-AS1 is overexpressed in the osteosarcoma cell lines (Saos-2, SOSP-9607, U2OS, and MG-63) compared to hFOB. Overexpression of DARS-AS1 promotes cell growth and invasion in MG-63 osteosarcoma cell. DARS-AS1 plays as one sponge for miR-532-3p in osteosarcoma cell, and miR-532-3p overexpression inhibits luciferase activity of DARS-AS1-WT, not DARS-AS1-MUT in MG-63 cell. Ectopic expression of DARS-AS1 inhibits miR-532-3p expression in MG-63 cell. Furthermore, miR-532-3p expression is downregulated in osteosarcoma specimens compared to in paired nontumor samples. MiR-532-3p expression is downregulated in osteosarcoma cell lines compared to hFOB. MiR-532-3p expression is negatively associated with DARS-AS1 expression in osteosarcoma specimens. miR-532-3p directly regulates CCR7 expression in osteosarcoma cell. Elevated DARS-AS1 expression enhances cell growth and invasion via regulating CCR7. Conclusions: These data firstly suggested that DARS-AS1 exerted as one oncogene in osteosarcoma partly via regulating miR-532-3p/CCR7.

Efficacy of systematic voice training combined with swallowing function exercises for the prevention of swallowing dysfunction in stroke patients: a retrospective study.

Background: Stroke is a common clinical brain disease, and swallowing dysfunction is one of the most common complications in stroke patients. Despite multiple treatments for swallowing dysfunction, it often leads to a series of complications. Interventions such as systematic voice training and swallowing function exercises have emerged in recent years, but their effectiveness remains unclear. Therefore, this study was conducted to investigate the effect of systematic voice training combined with swallowing function exercise for the prevention of swallowing dysfunction and improving the quality of life of stroke patients. Methods: We retrospectively analyzed 90 stroke patients admitted to Baotou Central Hospital from October 2018 to October 2021 as study subjects, and divided the patients into a combined voice training group (n=45) and a single swallowing exercise group (n=45) according to the interventions. The single swallowing exercise group received routine swallowing function exercise, and the combined voice training group used systematic voice training combined with swallowing function exercise. The incidence of swallowing dysfunction, malnutrition, aspiration pneumonia, and exercise compliance rate were compared between the two groups, and the quality of life of the two groups was evaluated by the Generic Quality of Life Inventory 74 (GQOLI-74) before and after the interventions, respectively. Results: The incidence of swallowing dysfunction, aspiration pneumonia, and malnutrition were lower in the combined voice training group than in the single swallowing exercise group (P<0.05), and there was no statistically significant difference in the exercise compliance rate between the two groups. The combined voice training group had higher psychological dimensions, physical dimensions, social adaptation, and total quality of life scores than the single swallowing exercise group (all P<0.05). Compared with the conventional intervention group, the combined voice training group had higher patient satisfaction (P<0.05). Conclusions: Systematic voice training combined with swallowing function exercise can effectively prevent the occurrence of swallowing dysfunction and improve the quality of life of patients with stroke.

Partial Restoration of Spinal Cord Neural Continuity via Sural Nerve Transplantation Using a Technique of Spinal Cord Fusion.

BACKGROUND: Spinal cord injury (SCI) can cause paralysis and serious chronic morbidity, and there is no effective treatment. Based on our previous experimental results of spinal cord fusion (SCF) in mice, rats, beagles, and monkeys, we developed a surgical protocol of SCF for paraplegic human patients. We designed a novel surgical procedure of SCF, called sural nerve transplantation (SNT), for human patients with lower thoracic SCI and distal cord dysfunction. METHODS: We conducted a clinical trial (ChiCTR2000030788) and performed SNT in 12 fully paraplegic patients due to SCI between T1 and T12. We assessed pre- and postoperative central nerve pain, motor function, sensory function, and autonomic nerve function. Conduction of action potentials across the sural nerve transplant was evaluated. Neural continuity was also examined by diffusion tensor imaging (DTI). RESULTS: Among the 12 paraplegic patients enrolled in this clinical trial, seven patients demonstrated improved autonomic nerve functions. Seven patients had clinically significant relief of their symptoms of cord central pain. One patient, however, developed postoperative cord central pain (VAS: 4). Five patients had varying degrees of recovered sensory and/or motor functions below the single neurologic level 1 month after surgery. One patient showed recovery of electrophysiologic, motor-evoked potentials 6 months after the operation. At 6 months after surgery, DTI indicated fusion and nerve connections of white cord and sural nerves in seven patients. CONCLUSION: SNT was able to fuse the axonal stumps of white cord and sural nerve and at least partially improve the cord central pain in most patients. Although SNT did not restore the spinal cord continuity in white matter in some patients, SNT could restore spinal cord continuity in the cortico-trunco-reticulo-propriospinal pathway, thereby restoring in part some motor and sensory functions. SNT may therefore be a safe, feasible, and effective method to treat paraplegic patients with SCI. Future clinical trials should be performed to optimize the type/technique of nerve transplantation, reduce surgical damage, and minimize postoperative scar formation and adhesion, to avoid postoperative cord central pain. CLINICAL TRIAL REGISTRATION: [http://www.chictr.org.cn/showproj.aspx?proj=50526], identifier [ChiCTR2000030788].

miR­205­3p promotes lung cancer progression by targeting APBB2.

Non­small cell lung cancer (NSCLC), a leading cause of cancer­associated mortality, has resulted in low survival rates and a high mortality worldwide. Accumulating evidence has suggested that microRNAs (miRs) play critical roles in the regulation of cancer progression and the present study aimed to explore the underlying mechanism of miR­205 in NSCLC. Reverse transcription­quantitative PCR was performed, which determined that miR­205 expression was upregulated in NSCLC, and the present study detected the upregulation of miR­205­3p in a number of NSCLC cell lines and NSCLC tissues. In addition, the mediation of amyloid ß precursor protein­binding family B member 2 (APBB2) by miR­205­3p was demonstrated. Moreover, miR­205­3p was predicted to directly target the 3'untranslated region of APBB2, which was confirmed using a dual­luciferase reporter assay. It was found that lentivirus mediated­APBB2 knockdown could promote cellular viability and suppress apoptosis in NSCLC cells, as determined via MTT, TUNEL and flow cytometry assays. Thus, the current findings highlighted the potential promotive impact of miR­205­3p on NSCLC processes and may provide theoretical evidence for miR­205­3p as a potential clinical gene therapy target.

Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718.

Machined surface integrity characteristics, including surface stresses, physical-mechanical properties and metallographic structures, play important roles in the fatigue performance of machined components. This work aimed at investigating the effects of machined surface integrity on high-temperature low-cycle fatigue life. The process parameters were optimized to obtain required surface integrity and fatigue life of the turning superalloy Inconel 718. The relationships between low-cycle fatigue life and machined surface integrity characterization parameters were established based on the low-cycle fatigue tests at a high temperature (650 °C). The sensitivities of turning process parameters to high-temperature low-cycle fatigue life were analyzed, and the optimization parameters were proposed with the goal of antifatigue manufacturing. Experimental results indicated that the impact order of the characterization parameters of machined surface integrity on the high-temperature low-cycle fatigue life were the degree of work hardening RHV, the residual stress in the cutting speed direction S22, the fatigue stress concentration factor Kf, the degree of grain refinement RD and the residual stress in the feed direction S33. In the range of turning parameters of the experiments in this research, the cutting speeds could be 80~110 m/min, and the feed rate could be 0.10~0.12 mm/rev to achieve a longer high-temperature low-cycle fatigue life. The results can be used for guiding the fatigue-resistant manufacturing research of aeroengine superalloy turbine disks.

Transplantation of a vascularized pedicle of hemisected spinal cord to establish spinal cord continuity after removal of a segment of the thoracic spinal cord: A proof-of-principle study in dogs.

INTRODUCTION: Glial scar formation impedes nerve regeneration/reinnervation after spinal cord injury (SCI); therefore, removal of scar tissue is essential for SCI treatment. AIMS: To investigate whether removing a spinal cord and transplanting a vascularized pedicle of hemisected spinal cord from the spinal cord caudal to the transection can restore motor function, to aid in the treatment of future clinical spinal cord injuries. We developed a canine model. After removal of a 1-cm segment of the thoracic (T10-T11) spinal cord in eight beagles, a vascularized pedicle of hemisected spinal cord from the first 1.5 cm of the spinal cord caudal to the transection (cut along the posterior median sulcus of the spinal cord) was transplanted to bridge the transected spinal cord in the presence of a fusogen (polyethylene glycol, PEG) in four of the eight dogs. We used various forms of imaging, electron microscopy, and histologic data to determine that after our transplantation of a vascular pedicled hemisection to bridge the transected spinal cord, electrical continuity across the spinal bridge was restored. RESULTS: Motor function was restored following our transplantation, as confirmed by the re-establishment of anatomic continuity along with interfacial axonal sprouting. CONCLUSION: Taken together, our findings suggest that SCI patients-who have previously been thought to have irreversible damage and/or paralysis-may be treated effectively with similar operative techniques to re-establish electrical and functional continuity following SCI.

BAPTA, a calcium chelator, neuroprotects injured neurons in vitro and promotes motor recovery after spinal cord transection in vivo.

AIM: Despite animal evidence of a role of calcium in the pathogenesis of spinal cord injury, several studies conducted in the past found calcium blockade ineffective. However, those studies involved oral or parenteral administration of Ca++ antagonists. We hypothesized that Ca++ blockade might be effective with local/immediate application (LIA) at the time of neural injury. METHODS: In this study, we assessed the effects of LIA of BAPTA (1,2-bis (o-aminophenoxy) ethane-N, N, N', N'-tetraacetic acid), a cell-permeable highly selective Ca++ chelator, after spinal cord transection (SCT) in mice over 4 weeks. Effects of BAPTA were assessed behaviorally and with immunohistochemistry. Concurrently, BAPTA was submitted for the first time to multimodality assessment in an in vitro model of neural damage as a possible spinal neuroprotectant. RESULTS: We demonstrate that BAPTA alleviates neuronal apoptosis caused by physical damage by inhibition of neuronal apoptosis and reactive oxygen species (ROS) generation. This translates to enhanced preservation of electrophysiological function and superior behavioral recovery. CONCLUSION: This study shows for the first time that local/immediate application of Ca++ chelator BAPTA is strongly neuroprotective after severe spinal cord injury.

Construction of ddRADseq-Based High-Density Genetic Map and Identification of Quantitative Trait Loci for Trans-resveratrol Content in Peanut Seeds.

Resveratrol (trans-3,4',5-trihydroxystilbene) is a natural stilbene phytoalexin which is also found to be good for human health. Cultivated peanut (Arachis hypogaea L.), a worldwide important legume crop, is one of the few sources of human's dietary intake of resveratrol. Although the variations of resveratrol contents among peanut varieties were observed, the variations across environments and its underlying genetic basis were poorly investigated. In this study, the resveratrol content in seeds of a recombination inbred line (RIL) population (Zhonghua 6 × Xuhua 13, 186 progenies) were quantified by high performance liquid chromatography (HPLC) method across four environments. Genotypes, environments and genotype × environment interactions significantly influenced the resveratrol contents in the RIL population. A total of 8,114 high-quality single nucleotide polymorphisms (SNPs) were identified based on double-digest restriction-site-associated DNA sequencing (ddRADseq) reads. These SNPs were clustered into bins using a reference-based method, which facilitated the construction of high-density genetic map (2,183 loci with a total length of 2,063.55 cM) and the discovery of several chromosome translocations. Through composite interval mapping (CIM), nine additive quantitative trait loci (QTL) for resveratrol contents were identified on chromosomes A01, A07, A08, B04, B05, B06, B07, and B10 with 5.07-8.19% phenotypic variations explained (PVE). Putative genes within their confidential intervals might play roles in diverse primary and secondary metabolic processes. These results laid a foundation for the further genetic dissection of resveratrol content as well as the breeding and production of high-resveratrol peanuts.

Peg-Enhanced Behavioral Recovery After Sciatic Nerve Transection and Either Suturing Or Sleeve Conduit Deployment in Rats.

Polyethylene glycol (PEG) has previously been reported to improve outcomes of peripheral nerve microsuturing. However, recent studies have challenged this finding. Given its clinical importance, we investigated the potential of PEG as a facilitator of peripheral nerve restoration. The sciatic nerve of 144 rats was transected and submitted either to simple suturing (Group A), PEG-enhanced suturing (Group B), and insertion in an arterial sleeve conduit without PEG (Group C), or with PEG (Group D) in equal numbers. Behavioral recovery was assessed with the sciatic function index (SFI). Nerve impulse conduction was assessed with compound muscle action potentials (CMAPs). Histology comprised standard hematoxylin/eosin staining, electron microscopy and glial cell line-derived neurotrophic factor (GDNF) immunohistochemistry. Expression of GDNF was also assessed with western blotting. Results were evaluated at weeks 1, 4, and 8. PEG treatment significantly improved behavioral recovery and morphology of nerve restoration, particularly in the sleeve conduit group, relative to that of controls. In conclusion, PEG may improve outcomes of peripheral nerve reconstruction.

Long non-coding RNA LINC00887 promotes progression of lung carcinoma by targeting the microRNA-206/NRP1 axis.

Long non-coding RNAs (lncRNAs) have been reported to participate in multiple biological processes, including tumorigenesis. In the current study, the function of a novel lncRNA LINC00887 was investigated in lung carcinoma. For this purpose, LINC00887 expression was assessed by reverse-transcription quantitative PCR. Cell viability was determined by the CCK-8 and EdU assays. Cell invasion, migration were assessed by the transwell and wound healing assays, respectively. A dual luciferase assay was used for analysis of the interaction between LINC00887 and miR-206, as well as the relationship of miR-206 with NRP1. A tumor xenograft study was performed to investigate the LINC00887-miR-206-NRP1 axis in vivo. The expression levels of LINC00887 were upregulated in lung carcinoma tissues and cells compared with adjacent tissues or normal cells (BEAS-2B). Knockdown LINC00887 significantly inhibited the proliferation, migration and invasion of lung carcinoma A549 and NCI-H460 cells. Furthermore, LINC00887 was identified as a competing endogenous RNA and to directly interact with miR-206. Mechanistically, miR-206 was demonstrated to regulate neuropilin-1 (NRP1) expression by targeting the NRP1 3'-untranslated region. The results of the present study suggested that the LINC00887-miR-206-NRP1 axis served a critical role in regulating lung carcinoma cell proliferation, migration and invasion. In addition, xenograft tumor model experiments revealed that silencing LINC00887 suppressed lung carcinoma tumor growth of in vivo. In summary, our results suggest that LINC00887 may serve an oncogenic role in lung carcinoma by targeting the miR-206/NRP1 axis, providing a potential therapeutic target for patients with lung carcinoma.

Dissection of the genetic basis of oil content in Chinese peanut cultivars through association mapping.

BACKGROUND: Peanut is one of the primary sources for vegetable oil worldwide, and enhancing oil content is the main objective in several peanut breeding programs of the world. Tightly linked markers are required for faster development of high oil content peanut varieties through genomics-assisted breeding (GAB), and association mapping is one of the promising approaches for discovery of such associated markers. RESULTS: An association mapping panel consisting of 292 peanut varieties extensively distributed in China was phenotyped for oil content and genotyped with 583 polymorphic SSR markers. These markers amplified 3663 alleles with an average of 6.28 alleles per locus. The structure, phylogenetic relationship, and principal component analysis (PCA) indicated two subgroups majorly differentiating based on geographic regions. Genome-wide association analysis identified 12 associated markers including one (AGGS1014_2) highly stable association controlling up to 9.94% phenotypic variance explained (PVE) across multiple environments. Interestingly, the frequency of the favorable alleles for 12 associated markers showed a geographic difference. Two associated markers (AGGS1014_2 and AHGS0798) with 6.90-9.94% PVE were verified to enhance oil content in an independent RIL population and also indicated selection during the breeding program. CONCLUSION: This study provided insights into the genetic basis of oil content in peanut and verified highly associated two SSR markers to facilitate marker-assisted selection for developing high-oil content breeding peanut varieties.