Site-Selective Excitation of Ti3+ Ions in Rutile TiO2 via Anisotropic Intra-Atomic 3d → 3d Transition.

Site-selective excitation (SSE), which is usually realized by tuning the wavelength of absorbed light, is an ideal way to study bond-selective chemistry, analyze the crystal structure, investigate protein conformation, etc., eventually leading to active manipulation of desired processes. Herein, SSE has been explored in (110)-, (100)-, and (011)-faced rutile TiO2, a prototypical material in both surface science and photocatalysis fields. Using ultraviolet photoelectron spectroscopy and photon energy-, substrate orientation-, and laser polarization-dependent two-photon photoemission spectroscopy (2PPE), intra-atomic 3d → 3d transition from the split Ti3+ 3d orbitals, i.e., band gap states and excited states at ∼1.00 eV below and ∼2.40 eV above the Fermi level, respectively, has been proven for all of the samples, suggesting that it is a common property of this material. The distinct structure of rutile TiO2 results in the anisotropic 3d → 3d transitions with the transition dipole moment along the long axes ([110] and [11̅0]) of TiO6 blocking units. This anisotropy facilitates the selective excitation of Ti3+ ions in the two types of TiO6, which cannot be realized by conventional wavelength tuning, via polarization alignment of the excitation source. Discovery in this work builds the foundation for future investigation of site-selective photophysical and photochemical processes and eventually possible active manipulation in this material at the atomic level.

Unveiling the Intrinsic Photophysics in Quasi-Two-Dimensional Perovskites.

The two-dimensional (2D) perovskites have drawn intensive attention due to their unique stability and outstanding optoelectronic properties. However, the debate surrounding the spatial phase distribution and band alignment among different 2D phases in the quasi-2D perovskite has created complexities in understanding the carrier dynamics, hindering material and device development. In this study, we employed highly sensitive transient absorption spectroscopy to investigate the carrier dynamics of (BA)2(MA)n-1PbnI3n+1 quasi-2D Ruddlesden-Popper perovskite thin films, nominally prepared as n = 4. We observed the carrier-density-dependent electron and hole transfer dynamics between the 2D and three-dimensional (3D) phases. Under a low carrier density within the linear response range, we successfully resolved three ultrafast processes of both electron and hole transfers, spanning from hundreds of femtoseconds to several picoseconds, tens to hundreds of picoseconds, and hundreds of picoseconds to several nanoseconds, which can be attributed to lateral-epitaxial, partial-epitaxial, and disordered-interface heterostructures between 2D and 3D phases. By considering the interplay among the phase structure, band alignment, and carrier dynamics, we have proposed material synthesis strategies aimed at enhancing the carrier transport. Our results not only provide deep insights into an accurate intrinsic photophysics of quasi-2D perovskites but also inspire advancements in the practical application of these materials.

Noncollinear Optical Parametric Amplification of Broadband Infrared Sum Frequency Generation Vibrational Spectroscopy.

Sum-frequency generation (SFG) vibrational spectroscopy is an invaluable tool in surface science, known for its specificity to surfaces and interfaces. Despite its wide application, it is often hampered by weak signal detection. Here, we present an innovative enhancement technique of postsample amplification, using a picosecond noncollinear optical parametric amplifier (NOPA). We conducted a systematical investigation into the impact of different intensities of pump and SFG seed light, as the input signal in NOPA, and demonstrated this method on the octadecanethiol (ODT) molecules on gold films. The amplified SFG by NOPA reproduced the SFG vibrational spectra, enhanced by about 4 orders of magnitude but with broader spectral resolution due to the short pulse width of the pump light in NOPA. This study makes it possible to realize highly sensitive SFG measurements, marking a significant advancement in spectroscopic analysis techniques.

Vibronic coupling of Rhodamine 6G molecules studied by doubly resonant sum frequency generation spectroscopy with narrowband infrared and broadband visible.

Doubly resonant sum frequency generation (DR-SFG) serves as a potent characteristic technique for probing the electronic spectra and vibronic coupling of molecules on surfaces. In this study, we successfully developed a novel infrared (IR)-white light (WL) DR-SFG spectroscopy based on narrowband IR and tunable broadband WL. This novel method was employed to explore the excitation spectrum and vibronic couplings of sub-monolayer Rhodamine 6G molecules. Our findings elucidate that the xanthene skeleton vibrational modes exhibit strong coupling with the S0-S1 electronic transition. Notably, we observed not only the 0-0 transition of the S0-S1 electronic continuum but also the 0-1 transition, a first time observation in the realm of DR-SFG spectroscopy. This advanced DR-SFG spectroscopy methodology facilitates a more sensitive examination of electronic spectra and the coupling between electronic transitions and vibrational modes, heralding a significant advancement in the understanding of molecular interactions on surfaces.

Regulating 3D Phase in Quasi-2D Perovskite Films for High-Performance and Stable Photodetectors.

The charge transport in quasi-2D perovskites limits their applications despite the superior stability and optoelectronic properties. Herein, a novel strategy is proposed to enhance the charge transport by regulating 3D perovskite phase in quasi-2D perovskite films. The carbohydrazide (CBH) as an additive is introduced into (PEA)2 MA3 Pb4 I13 precursors, which slows down the crystallization process and improves the phase ratio and crystal quality of the 3D phase. This structure change results in a significant improvement in charge transport and extraction, leading to the device demonstrating an almost 100% internal quantum efficiency, a peak responsivity of 0.41 A W-1 , and a detectivity of 1.31 × 1012 Jones at 570 nm under 0 V bias. Furthermore, the air and moisture stability of (PEA)2 MA3 Pb4 I13 films is not deteriorated but gets significantly improved due to the better crystal quality and the passivation of defects by the residual CBH molecule. This work demonstrates a strategy for improving the charge transport properties of quasi-2D perovskites and also sheds light on solving the stability issue of 3D perovskite films via the proper passivation or additives, which will inspire the fast development of the perovskite community.

Probing the Genuine Carrier Dynamics of Semiconducting Perovskites under Sunlight.

Understanding the nature of photogenerated carriers and their subsequent dynamics in semiconducting perovskites is important for the development of solar cell materials and devices. However, most ultrafast dynamic measurements on perovskite materials were conducted under high carrier densities, which likely obscures the genuine dynamics under low carrier densities in solar illumination conditions. In this study, we presented a detailed experimental study of the carrier density-dependent dynamics in hybrid lead iodide perovskites from femtosecond to microsecond using a highly sensitive transient absorption (TA) spectrometer. From the dynamic curves with low carrier density in the linear response range, we observed two fast trapping processes that occurred in less than 1 ps and tens of picoseconds, attributed to the shallow traps, and two slow decays with lifetimes of hundreds of nanoseconds and longer than 1 µs, related to the trap-assisted recombination and trapping at deep traps. Further TA measurements clearly show that PbCl2 passivation can effectively reduce both shallow and deep trap densities. These results provide insights into the intrinsic photophysics of semiconducting perovskites with direct implications for photovoltaic and optoelectronic applications under sunlight.

Spatiotemporal imaging of charge transfer in photocatalyst particles.

The water-splitting reaction using photocatalyst particles is a promising route for solar fuel production1-4. Photo-induced charge transfer from a photocatalyst to catalytic surface sites is key in ensuring photocatalytic efficiency5; however, it is challenging to understand this process, which spans a wide spatiotemporal range from nanometres to micrometres and from femtoseconds to seconds6-8. Although the steady-state charge distribution on single photocatalyst particles has been mapped by microscopic techniques9-11, and the charge transfer dynamics in photocatalyst aggregations have been revealed by time-resolved spectroscopy12,13, spatiotemporally evolving charge transfer processes in single photocatalyst particles cannot be tracked, and their exact mechanism is unknown. Here we perform spatiotemporally resolved surface photovoltage measurements on cuprous oxide photocatalyst particles to map holistic charge transfer processes on the femtosecond to second timescale at the single-particle level. We find that photogenerated electrons are transferred to the catalytic surface quasi-ballistically through inter-facet hot electron transfer on a subpicosecond timescale, whereas photogenerated holes are transferred to a spatially separated surface and stabilized through selective trapping on a microsecond timescale. We demonstrate that these ultrafast-hot-electron-transfer and anisotropic-trapping regimes, which challenge the classical perception of a drift-diffusion model, contribute to the efficient charge separation in photocatalysis and improve photocatalytic performance. We anticipate that our findings will be used to illustrate the universality of other photoelectronic devices and facilitate the rational design of photocatalysts.

Tandem fusion of albumin-binding domains promoted soluble expression and stability of recombinant trichosanthin in vitro and in vivo.

Trichosanthin (TCS), as a type 1 ribosome-inactivating protein, has a very high cytoplasmic activity in vitro and can quickly kill cancer cells. However, it is easily filtered and cleared by the kidney, which results in the short half-life and severely limits its application. In this study, we constructed several recombinant proteins by fusing the albumin binding domain mutant ABD035(abbreviated as ABD) to the N- or C-terminus of TCS to endow the recombinant TCS fusion protein with a longer half-life property binding with endogenous human serum albumin (HSA) via ABD to effectively exert its anti-tumor activity in vivo. Pull down, Dynamic light scattering and ELISA assays all showed that TCS fused with two ABD sequences at the C-terminus of TCS, has stronger binding capacity to HSA in vitro than TCS with one ABD. In vivo studies in BALB/C mice were performed and the elimination half-life of TCS-ABD-ABD is about 15-fold longer compared to TCS and anti-tumor activity is about 30% higher than that of TCS alone in BALB/C mouse experiments. Moreover, we found that TCS with two ABDs in tandem have the highest soluble expression level, more than 5 times higher than that of TCS, and the yield of purified protein of TCS-ABD-ABD was as high as 68.9 mg/L culture solution, which was about 7-fold higher than that of TCS. Furthermore, MTT assay showed that the anti-tumor activity of TCS-ABD-ABD was significantly higher than TCS fused with only one ABD sequence, indicating that the repeated ABD sequences facilitated the biological activity of TCS. In this paper, the fusion of the albumin-binding domain in tandem with TCS can effectively improve its stability in vivo and also significantly increase its soluble expression, expanding the application of the albumin-binding domain in the high soluble expression and stability of protein drugs.

Valence Band of Rutile TiO2(110) Investigated by Polarized-Light-Based Angle-Resolved Photoelectron Spectroscopy.

Band structure dictates optical and electronic properties of solids and eventually the efficiency of the semiconductor based solar conversion. Compared to numerous theoretical calculations, the experimentally measured band structure of rutile TiO2, a prototypical photocatalytic material, is rare. In this work, the valence band structure of rutile TiO2(110) is measured by angle-resolved photoelectron spectroscopy using polarized extreme ultraviolet light. The effective mass of the hole, which has never been measured before, is determined to be 4.66-6.87 m0 (free electron mass) and anisotropic. The dependence of photoemission intensities on excitation light polarization is analyzed by taking into account of the parity symmetry of molecular orbitals in the blocking unit of rutile TiO2. This work reports a direct measurement of valence band structure and hole effective mass of rutile TiO2(110), which will deepen our understanding of the electronic structure and charge carrier properties of the model material and provide reference data for future theoretical calculations.

Chiral Hybrid Copper(I) Halides for High Efficiency Second Harmonic Generation with a Broadband Transparency Window.

Chiral hybrid organic-inorganic metal halides (HOMHs) with intrinsic noncentrosymmetry have shown great promise for applications in second-order nonlinear optics (NLO). However, established chiral HOMHs often suffer from their relatively small band gaps, which lead to negative impacts on transparent window and laser-induced damage thresholds (LDT). Here, we have synthesized two chiral HOMHs based on CuI halides, namely (R-/S-MBA)CuBr2 , which feature well-balanced NLO performances with a highly efficient SHG response, outstanding optical transparency, and high LDT. The effective second-order NLO coefficient of (R-MBA)CuBr2 has been determined to be ≈24.7 pm V-1 , which is two orders of magnitude higher than that of their CuII counterparts. This work shows the promising potential of CuI -based chiral HOMHs for nonlinear photonic applications in wide wavelength regions.

Anisotropic d-d Transition in Rutile TiO2.

The band gap state of TiO2, which is dominated by Ti3+ 3d character, is of great relevance to light absorption, electron trapping, charge recombination, and conduction band structure. Despite the importance, the explanation of the excitation from this state is controversial. To this end, the electronic structures of TiO2(110) and TiO2(011)-(2 × 1) have been systematically measured with two-photon photoemission spectroscopy. The results reveal the anisotropic nature of the electronic structure in rutile TiO2 at seemingly equivalent directions of [110] and [11̅0], the long axes of the TiO6 blocking unit. Although the resonant energy of these two d-d transitions is identical, the energy levels are systematically shifted by 0.1 eV. We propose this anisotropy originates from the broken symmetry of the rutile TiO2 crystals caused by the surface. The proposed asymmetry-caused electronic structure anisotropy could be generalized to other similar materials and may affect associated catalytic properties. This work provides an important benchmark for related calculations.

Efficient generation of narrowband picosecond pulses from a femtosecond laser.

In some applications of broadband ultrafast spectroscopy, such as surface sum frequency generation vibrational spectroscopy, femtosecond stimulated Raman spectroscopy (SRS), and coherent anti-Stokes Raman spectroscopy, a narrowband picosecond pulse is required to obtain a high spectral resolution. Here, we present a method to generate narrowband picosecond second harmonic (SH) and fundamental frequency (FF) pulses with high-conversion efficiency from a Ti:sapphire femtosecond laser amplifier. The narrowband picosecond SH pulse was generated based on the group velocity mismatch between the SH and FF pulses in a nonlinear crystal of ß-barium borate (BBO). The small SH nonlinear optical coefficient was optimized by changing the azimuth angle of a thick BBO crystal, successfully avoiding the saturation effect in the SH generation process. The SH pulse was then used to pump an optical parametric amplifier to efficiently amplify the narrowband FF seed pulse, which was obtained with an etalon by spectrally filtering the output from the femtosecond laser amplifier. Dual-wavelength output, which could be very useful in femtosecond SRS, was also realized.

Ultrahigh sensitive transient absorption spectrometer.

Transient absorption (TA) spectroscopy is considered as a powerful technique that reflects the ultrafast dynamics of photogenerated carriers in photoelectric and photocatalysis materials. However, limited by its sensitivity, the photogenerated carrier density in TA measurements of solar energy materials is usually much higher than that in the real working condition. Here, we present a combination of kHz macro-pulse and MHz micro-pulse technique for an ultrahigh sensitive TA spectrometer, which improves the sensitivity to the 10-7 level of ΔOD. It enables us to study ultrafast carrier dynamics pumped by very low power, which can avoid the influence of many-body interactions and the nonlinear effect associated with high carrier density. This work provides a novel TA method with ultrahigh sensitivity, which will play an important role in investigating the carrier dynamics of semiconductors in the working condition.

Full diagnostics and optimization of time resolution for time- and angle-resolved photoemission spectroscopy.

Achieving a high time resolution is highly desirable for revealing the electron dynamics and light-induced phenomena in time- and angle-resolved photoemission spectroscopy (TrARPES). Here, we identify key factors for achieving the optimum time resolution, including laser bandwidth and optical component induced chirp. A full diagnostic scheme is constructed to characterize the pulse duration and chirp of the fundamental beam, second harmonic, and fourth harmonic, and prism pairs are used to compensate for the chirp. Moreover, by using a Sb2Te3 film as a test sample, we can achieve a high test efficiency for the time resolution during the optimization process. An optimized time resolution of 81 fs is achieved in our TrARPES system with a high repetition rate tunable from 76 to 4.75/n MHz.

Epitaxial Growth of Centimeter-Scale Single-Crystal MoS2 Monolayer on Au(111).

Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) have emerged as attractive platforms in next-generation nanoelectronics and optoelectronics for reducing device sizes down to a 10 nm scale. To achieve this, the controlled synthesis of wafer-scale single-crystal TMDs with high crystallinity has been a continuous pursuit. However, previous efforts to epitaxially grow TMD films on insulating substrates (e.g., mica and sapphire) failed to eliminate the evolution of antiparallel domains and twin boundaries, leading to the formation of polycrystalline films. Herein, we report the epitaxial growth of wafer-scale single-crystal MoS2 monolayers on vicinal Au(111) thin films, as obtained by melting and resolidifying commercial Au foils. The unidirectional alignment and seamless stitching of the MoS2 domains were comprehensively demonstrated using atomic- to centimeter-scale characterization techniques. By utilizing onsite scanning tunneling microscope characterizations combined with first-principles calculations, it was revealed that the nucleation of MoS2 monolayer is dominantly guided by the steps on Au(111), which leads to highly oriented growth of MoS2 along the ⟨110⟩ step edges. This work, thereby, makes a significant step toward the practical applications of MoS2 monolayers and the large-scale integration of 2D electronics.

Single Molecule Photocatalysis on TiO2 Surfaces.

Heterogeneous photocatalysis has been widely applied in various fields, such as photovoltaic cell, solar water splitting, photocatalytic pollutant degradation, and so on. Therefore, the reaction mechanisms involved in these important photocatalytic processes, especially in TiO2 photocatalysis, have been extensively investigated by various surface science techniques in the past decade. In this review, we highlight the recent progress that provides fundamental insights into TiO2 photocatalysis through direct tracking the evolution of single molecule photochemistry on TiO2 single crystal surfaces using a combination of scanning tunneling microscopy (STM) and other surface science techniques. Insight into the structures of various TiO2 surfaces is discussed first, which provides a basic concept on TiO2. Afterward, the details of the single molecule photocatalysis of several important molecules (water, alcohols, and aldehydes) on the model TiO2 surfaces are presented, which are trying to probe bond cleavages and the roles of adsorption sties and adsorption states in TiO2 photocatalysis step-by-step. Last, challenges and opportunities in single molecule photocatalysis on TiO2 are discussed briefly.

Flexible high-resolution broadband sum-frequency generation vibrational spectroscopy for intrinsic spectral line widths.

The difficulty in achieving high spectral resolution and accurate line shape in sum-frequency generation vibrational spectroscopy (SFG-VS) has restricted its use in applications requiring precise detection and quantitative analysis. Recently, the development of high-resolution broadband sum-frequency generation vibrational spectroscopy (HR-BB-SFG-VS) with sub-wavenumber resolution generated by synchronizing two independent amplifier lasers have opened new opportunities for probing an intrinsic SFG response. Here, we present a new flexible approach to achieve HR-BB-SFG-VS. In this system, two regeneration amplifiers shared the same oscillator laser as the seed, and a time-asymmetric visible pulse with a nearly Lorentzian line shape filtered by an etalon was used to overlap with a femtosecond broadband infrared pulse. This Lorentzian line shape of the visible pulse can greatly simplify the spectral fitting and analysis. We also demonstrated that the single-sided long visible pulse provided both high spectral resolution (1.4 cm-1) and effective suppression of the non-resonant background by detuning the time delay between visible and infrared pulses in SFG-VS measurements. With this new SFG setup, a pair of spectral splittings by 3.1 ± 0.7 and 3 ± 0.2 cm-1 for the symmetric and antisymmetric stretching of the CH3 group was resolved at the CH3CN/TiO2(110) surface, which are tentatively attributed to two different orientational methyl groups. These technological advancements can help broaden the applications of HR-BB-SFG-VS and provide solid ground for a better understanding of complex molecular structures and dynamics at interfaces.

Elementary Chemical Reactions in Surface Photocatalysis.

Photocatalytic hydrogen evolution and organic degradation on oxide materials have been extensively investigated in the last two decades. Great efforts have been dedicated to the study of photocatalytic reaction mechanisms of a variety of molecules on TiO2 surfaces by using surface science methods under ultra-high vacuum (UHV) conditions, providing fundamental understanding of surface chemical reactions in photocatalysis. In this review, we summarize the recent progress in the study of photocatalysis of several important species (water, methanol, and aldehydes) on different TiO2 surfaces. The results of these studies have provided us deep insights into the elementary processes of surface photocatalysis and stimulated a new frontier of research in this area. Based on the results of these studies, a new dynamics-based photocatalysis model is also discussed.

A review of dynamical resonances in A + BC chemical reactions.

The concept of the transition state has played an important role in the field of chemical kinetics and reaction dynamics. Reactive resonances in the transition-state region can dramatically enhance the reaction probability; thus investigation of the reactive resonances has attracted great attention from chemical physicists for many decades. In this review, we mainly focus on the recent progress made in probing the elusive resonance phenomenon in the simple A + BC reaction and understanding its nature, especially in the benchmark F/Cl + H2 and their isotopic variants. The signatures of reactive resonances in the integral cross section, differential cross section (DCS), forward- and backward-scattered DCS, and anion photodetachment spectroscopy are comprehensively presented in individual prototype reactions. The dynamical origins of reactive resonances are also discussed in this review, based on information on the wave function in the transition-state region obtained by time-dependent quantum wave-packet calculations.