RESUMO
Secreted metabolites are an important class of bio-process analytical technology (PAT) targets that can correlate to cell conditions. However, current strategies for measuring metabolites are limited to discrete measurements, resulting in limited understanding and ability for feedback control strategies. Herein, a continuous metabolite monitoring strategy is demonstrated using a single-use metabolite absorbing resonant transducer (SMART) to correlate with cell growth. Polyacrylate is shown to absorb secreted metabolites from living cells containing hydroxyl and alkenyl groups such as terpenoids, that act as a plasticizer. Upon softening, the polyacrylate irreversibly conformed into engineered voids above a resonant sensor, changing the local permittivity which is interrogated, contact-free, with a vector network analyzer. Compared to sensing using the intrinsic permittivity of cells, the SMART approach yields a 20-fold improvement in sensitivity. Tracking growth of many cell types such as Chinese hamster ovary, HEK293, K562, HeLa, and E. coli cells as well as perturbations in cell proliferation during drug screening assays are demonstrated. The sensor is benchmarked to show continuous measurement over six days, ability to track different growth conditions, selectivity to transducing active cell growth metabolites against other components found in the media, and feasibility to scale out for high throughput campaigns.
Assuntos
Técnicas de Cultura de Células , Cricetulus , Transdutores , Humanos , Animais , Técnicas de Cultura de Células/métodos , Técnicas de Cultura de Células/instrumentação , Células CHO , Células HeLa , Cricetinae , Células HEK293 , Desenho de Equipamento/métodos , Escherichia coli/metabolismo , Proliferação de Células/fisiologiaRESUMO
In this work, Oxford Nanopore sequencing is tested as an accessible method for quantifying heterogeneity of amplified DNA. This method enables rapid quantification of deletions, insertions, and substitutions, the probability of each mutation error, and their locations in the replicated sequences. Amplification techniques tested were conventional polymerase chain reaction (PCR) with varying levels of polymerase fidelity (OneTaq, Phusion, and Q5) as well as rolling circle amplification (RCA) with Phi29 polymerase. Plasmid amplification using bacteria was also assessed. By analyzing the distribution of errors in a large set of sequences for each sample, we examined the heterogeneity and mode of errors in each sample. This analysis revealed that Q5 and Phusion polymerases exhibited the lowest error rates observed in the amplified DNA. As a secondary validation, we analyzed the emission spectra of sfGFP fluorescent proteins synthesized with amplified DNA using cell free expression. Error-prone polymerase chain reactions confirmed the dependency of reporter protein emission spectra peak broadness to DNA error rates. The presented nanopore sequencing methods serve as a roadmap to quantify the accuracy of other gene amplification techniques, as they are discovered, enabling more homogenous cell-free expression of desired proteins.
RESUMO
Reinforcement learning (RL), a subset of machine learning (ML), could optimize and control biomanufacturing processes, such as improved production of therapeutic cells. Here, the process of CAR T-cell activation by antigen-presenting beads and their subsequent expansion is formulated in silico. The simulation is used as an environment to train RL-agents to dynamically control the number of beads in culture to maximize the population of robust effector cells at the end of the culture. We make periodic decisions of incremental bead addition or complete removal. The simulation is designed to operate in OpenAI Gym, enabling testing of different environments, cell types, RL-agent algorithms, and state inputs to the RL-agent. RL-agent training is demonstrated with three different algorithms (PPO, A2C, and DQN), each sampling three different state input types (tabular, image, mixed); PPO-tabular performs best for this simulation environment. Using this approach, training of the RL-agent on different cell types is demonstrated, resulting in unique control strategies for each type. Sensitivity to input-noise (sensor performance), number of control step interventions, and advantages of pre-trained RL-agents are also evaluated. Therefore, we present an RL framework to maximize the population of robust effector cells in CAR T-cell therapy production.
Assuntos
Aprendizado de Máquina , Linfócitos T , Linfócitos T/imunologia , Humanos , Simulação por Computador , Ativação Linfocitária , Receptores de Antígenos Quiméricos/imunologia , Imunoterapia Adotiva/métodos , Técnicas de Cultura de Células/métodosRESUMO
Wearable health sensors for an expanding range of physiological parameters have experienced rapid development in recent years and are poised to disrupt the way healthcare is tracked and administered. The monitoring of environmental contaminants with wearable technologies is an additional layer of personal and public healthcare and is also receiving increased focus. Wearable sensors that detect exposure to airborne viruses could alert wearers of viral exposure and prompt proactive testing and minimization of viral spread, benefitting their own health and decreasing community risk. With the high levels of asymptomatic spread of COVID-19 observed during the pandemic, such devices could dramatically enhance our pandemic response capabilities in the future. To facilitate advancements in this area, this review summarizes recent research on airborne viral detection using wearable sensing devices as well as technologies suitable for wearables. Since the low concentration of viral particles in the air poses significant challenges to detection, methods for airborne viral particle collection and viral sensing are discussed in detail. A special focus is placed on nucleic acid-based viral sensing mechanisms due to their enhanced ability to discriminate between viral subtypes. Important considerations for integrating airborne viral collection and sensing on a single wearable device are also discussed.
RESUMO
Cell-free expression (CFE) has shown recent utility in prototyping enzymes for discovery efforts. In this work, CFE is demonstrated as an effective tool to screen putative polyester polyurethane degrading enzyme sequences sourced from metagenomic analysis of biofilms prospected on aircraft and vehicles. An automated fluid handler with a controlled temperature block is used to assemble the numerous 30 µL CFE reactions to provide more consistent results over human assembly. In sum, 13 putative hydrolase enzymes from the biofilm organisms as well as a previously verified, polyester-degrading cutinase were expressed using in-house E. coli extract and minimal linear templates. The enzymes were then tested for esterase activity directly in extract using nitrophenyl conjugated substrates, showing highest sensitivity to shorter substrates (4-nitrophenyl hexanoate and 4-nNitrophenyl valerate). This screen identified 10 enzymes with statistically significant activities against these substrates; however, all were lower in measured relative activity, on a CFE volume basis, to the established cutinase control. This approach portends the use of CFE and reporter probes to rapidly prototype, screen and design for synthetic polymer degrading enzymes from environmental consortia. Graphical Abstract.
RESUMO
Membrane-active molecules are of great importance to drug delivery and antimicrobials applications. While the ability to prototype new membrane-active molecules has improved greatly with the advent of automated chemistries and rapid biomolecule expression techniques, testing methods are still limited by throughput, cost, and modularity. Existing methods suffer from feasibility constraints of working with pathogenic living cells and by intrinsic limitations of model systems. Herein, we demonstrate an abiotic sensor that uses semiconducting single-walled carbon nanotubes (SWCNTs) as near-infrared fluorescent transducers to report membrane interactions. This sensor is composed of SWCNTs aqueously suspended in lipid, creating a cylindrical, bilayer corona; these SWCNT probes are very sensitive to solvent access (changes in permittivity) and thus report morphological changes to the lipid corona by modulation of fluorescent signals, where binding and disruption are reported as brightening and attenuation, respectively. This mechanism is first demonstrated with chemical and physical membrane-disruptive agents, including ethanol and sodium dodecyl sulfate, and application of electrical pulses. Known cell-penetrating and antimicrobial peptides are then used to demonstrate how the dynamic response of these sensors can be deconvoluted to evaluate different parallel mechanisms of interaction. Last, SWCNTs functionalized in several different bacterial lipopolysaccharides (Pseudomonas aeruginosa, Klebsiella pneumoniae, and Escherichia coli) are used to evaluate a panel of known membrane-disrupting antimicrobials to demonstrate that drug selectivity can be assessed by suspension of SWCNTs with different membrane materials.
RESUMO
Enzymatic biodegradation is a promising method to reclaim plastic materials. However, to date, a high-throughput method for screening potential enzyme candidates for biodegradation is still lacking. Here, we propose a single-walled carbon nanotube (SWCNT) fluorescence sensor for screening the enzymatic degradation of polyester polyurethane nanoparticles. Through wrapping the SWCNT with cationic chitosan, an electrostatic bond is formed between the SWCNT and Impranil, a widely applied model substrate of polyester polyurethane. As Impranil is being degraded by the enzymes, a characteristic quenching at a short reaction time followed by a brightening at a longer reaction time in the fluorescence signal is observed. The time-dependent fluorescence response is compared with turbidity measurement, and we conclude that the brightening in fluorescence results from the binding of the degradation product with the SWCNT. The proposed SWCNT sensor design has the potential to screen enzyme candidates for selective degradation of other plastic particles.
Assuntos
Nanopartículas , Nanotubos de Carbono , Polímeros , Poliésteres , Poliuretanos , Plásticos , CorantesRESUMO
Lipid-functionalized single-walled carbon nanotubes (SWNTs) have garnered significant interest for their potential use in a wide range of biomedical applications. In this work, we used molecular dynamics simulations to study the equilibrium properties of SWNTs surrounded by the phosphatidylcholine (POPC) corona phase and their interactions with three cell membrane disruptor peptides: colistin, TAT peptide, and crotamine-derived peptide. Our results show that SWNTs favor asymmetrical positioning within the POPC corona, so that one side of the SWNT, covered by the thinnest part of the corona, comes in contact with charged and polar functional groups of POPC and water. We also observed that colistin and TAT insert deeply into the POPC corona, while crotamine-derived peptide only adsorbs to the corona surface. In separate simulations, we show that three examined peptides exhibit similar insertion and adsorption behaviors when interacting with POPC bilayers, confirming that peptide-induced perturbations to POPC in conjugates and bilayers are similar in nature and magnitude. Furthermore, we observed correlations between the peptide-induced structural perturbations and the near-infrared emission of the lipid-functionalized SWNTs, which suggest that the optical signal of the conjugates transduces the morphological changes in the lipid corona. Overall, our findings indicate that lipid-functionalized SWNTs could serve as simplified cell membrane model systems for prescreening of new antimicrobial compounds that disrupt cell membranes.
Assuntos
Nanotubos de Carbono , Nanotubos de Carbono/química , Colistina , Peptídeos/química , Membrana Celular/metabolismo , Lecitinas , Bicamadas Lipídicas/químicaRESUMO
Inexpensive and accurate tools for monitoring conditions in enclosed environments (through garments, bandages, tissue, etc.) have been a long-standing goal of medicine. Passive resonant sensors are a promising solution for such wearable health sensors as well as off-body diagnostics. They are simple circuits with inherent inductance and capacitance (LC tank) that have a measurable resonant frequency. Changes in local parameters, e.g., permittivity or geometry, effect inductance and capacitance which cause a resonant frequency shift response. This signal transduction has been applied to several biomedical applications such as intracranial pressure, hemodynamics, epidermal hydration, etc. Despite these many promising applications presented in the literature, resonant sensors still do not see widespread adoption in biomedical applications, especially as wearable or embedded sensing devices. This perspective highlights some of the current challenges facing LC resonant sensors in biomedical applications, such as positional sensitivity, and potential strategies that have been developed to overcome them. An outlook on adoption in medicine and health monitoring is presented, and a perspective is given on next steps for research in this field.
Assuntos
Bandagens , Capacitância ElétricaRESUMO
Lipid-functionalized single-walled carbon nanotubes (SWNTs) have garnered significant interest for their potential use in a wide range of biomedical applications. In this work, we used molecular dynamics simulations to study the equilibrium properties of SWNTs surrounded by the phosphatidylcholine (POPC) corona phase, and their interactions with three cell membrane disruptor peptides: colistin, TAT peptide, and crotamine-derived peptide. Our results show that SWNTs favor asymmetrical positioning within the POPC corona, so that one side of the SWNT, covered by the thinnest part of the corona, comes in contact with charged and polar functional groups of POPC and water. We also observed that colistin and TAT insert deeply into POPC corona, while crotamine-derived peptide only adsorbs to the corona surface. Compared to crotamine-derived peptide, colistin and TAT also induce larger perturbations in the thinnest region of the corona, by allowing more water molecules to directly contact the SWNT surface. In separate simulations, we show that three examined peptides exhibit similar insertion and adsorption behaviors when interacting with POPC bilayers, confirming that peptide-induced perturbations to POPC in conjugates and bilayers are similar in nature and magnitude. Furthermore, we observed correlations between the peptide-induced structural perturbations and the near-infrared emission of the lipid-functionalized SWNTs, which suggest that the optical signal of the conjugates transduces the morphological changes in the lipid corona. Overall, our findings indicate that lipid-functionalized SWNTs could serve as simplified cell membrane model systems for pre-screening of new antimicrobial compounds that disrupt cell membranes.
RESUMO
Cancer continues to be a significant cause of non-traumatic pediatric mortality. Diagnosis of pediatric solid tumors is paramount to prescribing the correct treatment regimen. Recent efforts have focused on non-invasive methods to obtain tumor tissues, but one of the challenges encountered is the ability to obtain an adequate amount of viable tissue. In this study, a wireless, inductor-capacitor (LC) sensor was employed to detect relative permittivity of pediatric tumor tissues. There is a comparison of resonant frequencies of tumor tissues between live versus dead tissues, the primary tumor tissue versus tissue from the organs of origin or metastasis, and treated versus untreated tumors. The results show significant shifts in resonant frequencies between the comparison groups. Dead tissues demonstrated a significant shift in resonant frequencies compared to alive tissues. There were significant differences between the resonant frequencies of normal tissues versus tumor tissues. Resonant frequencies were also significantly different between primary tumors compared to their respective metastases. These data indicate that there are potential clinical applications of LC technology in the detection and diagnosis of pediatric solid tumors.
RESUMO
The COVID-19 pandemic has emphasized the importance of widespread testing to control the spread of infectious diseases. The rapid development, scale-up, and deployment of viral and antibody detection methods since the beginning of the pandemic have greatly increased testing capacity. Desirable attributes of detection methods are low product costs, self-administered protocols, and the ability to be mailed in sealed envelopes for the safe analysis and subsequent logging to public health databases. Herein, such a platform is demonstrated with a screen-printed, inductor-capacitor (LC) resonator as a transducer and a toehold switch coupled with cell-free expression as the biological selective recognition element. In the presence of the N-gene from SARS-CoV-2, the toehold switch relaxes, protease enzyme is expressed, and it degrades a gelatin switch that ultimately shifts the resonant frequency of the planar resonant sensor. The gelatin switch resonator (GSR) can be analyzed through a sealed envelope allowing for assessment without the need for careful sample handling with personal protective equipment or the need for workup with other reagents. The toehold switch used in this sensor demonstrated selectivity to SARS-CoV-2 virus over three seasonal coronaviruses and SARS-CoV-1, with a limit of detection of 100 copies/µL. The functionality of the platform and assessment in a sealed envelope with an automated scanner is shown with overnight shipment, and further improvements are discussed to increase signal stability and further simplify user protocols toward a mail-in platform.
Assuntos
COVID-19 , SARS-CoV-2 , COVID-19/diagnóstico , Humanos , Pandemias , Serviços Postais , SARS-CoV-2/genéticaRESUMO
Assigning enzyme commission (EC) numbers using sequence information alone has been the subject of recent classification algorithms where statistics, homology and machine-learning based methods are used. This work benchmarks performance of a few of these algorithms as a function of sequence features such as chain length and amino acid composition (AAC). This enables determination of optimal classification windows for de novo sequence generation and enzyme design. In this work we developed a parallelization workflow which efficiently processes >500,000 annotated sequences through each candidate algorithm and a visualization workflow to observe the performance of the classifier over changing enzyme length, main EC class and AAC. We applied these workflows to the entire SwissProt database to date (n = 565245) using two, locally installable classifiers, ECpred and DeepEC, and collecting results from two other webserver-based tools, Deepre and BENZ-ws. It is observed that all the classifiers exhibit peak performance in the range of 300 to 500 amino acids in length. In terms of main EC class, classifiers were most accurate at predicting translocases (EC-6) and were least accurate in determining hydrolases (EC-3) and oxidoreductases (EC-1). We also identified AAC ranges that are most common in the annotated enzymes and found that all classifiers work best in this common range. Among the four classifiers, ECpred showed the best consistency in changing feature space. These workflows can be used to benchmark new algorithms as they are developed and find optimum design spaces for the generation of new, synthetic enzymes.
RESUMO
Hydrolase co-therapies that degrade biofilm extracellular polymeric substances (EPS) allow for a better diffusion of antibiotics and more effective treatment; current methods for quantitatively measuring the enzymatic degradation of EPS are not amendable to high-throughput screening. Herein, we present biofilm EPS-functionalized single-walled carbon nanotube (SWCNT) probes for rapid screening of hydrolytic enzyme selectivity and activity on EPS. The extent of biofilm EPS degradation is quantified by monitoring the quenching of the SWCNT fluorescence. We used this platform to screen 16 hydrolases with varying bond breaking selectivity against a panel of wild-type Pseudomonas aeruginosa and mutants deficient or altered in one or more EPS. Next, we performed concentration-dependent studies of six enzymes on two common strains found in cystic fibrosis (CF) environments and, for each enzyme, extracted three first-order rate constants and their relative contributions by fitting a parallel, multi-site degradation model, with a good model fit (R2 from 0.65 to 0.97). Reaction rates (turnover rates) are dependent on the enzyme concentration and range from 6.67 × 10-11 to 2.80 × 10-3 *s-1 per mg/mL of enzymes. Lastly, we confirmed findings from this new assay using an established crystal-violet staining assay for a subset of hydrolase panels. In summary, our work shows that this modular sensor is amendable to the high-throughput screening of EPS degradation, thereby improving the rate of discovery and development of novel hydrolases.
Assuntos
Nanotubos de Carbono , Pseudomonas aeruginosa , Antibacterianos/metabolismo , Biofilmes , Matriz Extracelular/metabolismo , Pseudomonas aeruginosa/metabolismoRESUMO
This protocol describes the design of a minimal DNA template and the steps for enzymatic amplification, enabling rapid prototyping of assayable proteins in less than 24 h using cell-free expression. After receiving DNA from a vendor, the gene fragment is PCR-amplified, cut, circularized, and cryo-banked. A small amount of the banked DNA is then diluted and amplified significantly (up to 106x) using isothermal rolling circle amplification (RCA). RCA can yield microgram quantities of the minimal expression template from picogram levels of starting material (mg levels if all starting synthetic fragment is used). In this work, a starting amount of 20 pg resulted in 4 µg of the final product. The resulting RCA product (concatemer of the minimal template) can be added directly to a cell-free reaction with no purification steps. Due to this method being entirely PCR-based, it may enable future high-throughput screening efforts when coupled with automated liquid handling systems.
Assuntos
DNA , Técnicas de Amplificação de Ácido Nucleico , Sistema Livre de Células , Reação em Cadeia da PolimeraseRESUMO
Cell-free protein expression (CFPS) from E. coli cell lysate is an established chemical biology technique. Common efforts to improve synthesis capacity, such as strain engineering and process improvements, have overlooked the opportunity to increase productivity by reducing the dependence on limited, dissolved oxygen. Here we demonstrate conditioning E. coli cells for anaerobic respiration which increases the initial protein expression rate up to 4-fold and increases titer by 50% as compared to traditional aerobic cell lysate when using sfGFP as a reporter protein in CFPS reactions run at atmospheric conditions. This enhancement is even more significant when run in an oxygen-depleted environment, where anaerobic respiration preconditioned cells increase yield when supplemented with nitrite as a terminal electron acceptor (TEA). Furthermore, we test knockout mutants to determine key proteins responsible for enhancing the anaerobically prepared CFPS lysate. Further improvements could be made in preconditioning cells by increasing expression levels of critical pathway enzymes or by screening other TEA.
Assuntos
Sistema Livre de Células/metabolismo , Escherichia coli/metabolismo , Anaerobiose , Biossíntese de ProteínasRESUMO
The practical impact of analytical probes that transduce in the near-infrared (nIR) has been dampened by the lack of cost-effective and portable nIR fluorimeters. Herein, we demonstrate straightforward designs for an inexpensive microplate reader and a portable fluorimeter. These instruments require minimally complex machining and fabrication and operate with an open-source programming language (Python). Complete wiring diagrams, assembly diagrams, and scripts are provided. To demonstrate the utility of these two instruments, we performed high-throughput and field-side measurements of soil samples to evaluate the effect of soil management strategies on extracellular proteolytic, cellulolytic, and lignin-modifying activities. This was accomplished with fluorescent enzyme probes that utilized uniquely sensitive transducers exclusive to the nIR spectrum, single-walled carbon nanotubes. We also used the portable fluorimeter to evaluate spatial variations of proteolytic activity within individual field plots, while minimizing the effects of soil storage and handling. These demonstrations indicate the utility of these fluorimeters for translating analytical probes that operate in the nIR beyond the laboratory and into actual use.
Assuntos
Nanotubos de Carbono , SoloRESUMO
Optimal tip sonication settings, namely tip position, input power, and pulse durations, are necessary for temperature sensitive procedures like preparation of viable cell extract. In this paper, the optimum tip immersion depth (20-30% height below the liquid surface) is estimated which ensures maximum mixing thereby enhancing thermal dissipation of local cavitation hotspots. A finite element (FE) heat transfer model is presented, validated experimentally with (R2 > 97%) and used to observe the effect of temperature rise on cell extract performance of E. coli BL21 DE3 star strain and estimate the temperature threshold. Relative yields in the top 10% are observed for solution temperatures maintained below 32°C; this reduces below 50% relative yield at temperatures above 47°C. A generalized workflow for direct simulation using the COMSOL code as well as master plots for estimation of sonication parameters (power input and pulse settings) is also presented.
RESUMO
This paper details a passive, inductor-capacitor (LC) resonant sensor embedded in a commercial dressing for low-cost, contact-free monitoring of a wound; this would enable tracking of the healing process while keeping the site closed and sterile. Spiral LC resonators were fabricated from flexible, copper-coated polyimide and interrogated using external reader antennas connected to a two-port vector network analyzer; the forward transmission scattering parameter (S21) magnitude was collected, and the resonant frequency (MHz) and the peak-to-peak amplitude of the resonant feature were identified. These increase during the healing process as the permittivity and conductivity of the tissue change. The sensor was first tested on gelatin-based tissue-mimicking phantoms that simulate layers of muscle, blood, fat, and skin at varying phases of wound healing. Finite element modeling was also used to verify the empirical results based on the expected variations in dielectric properties of the tissue. The performance of the resonant sensors for in vivo applications was investigated by conducting animal studies using canine patients that presented with a natural wound as well as a controlled cohort of rat models with surgically administered wounds. Finally, transfer functions are presented that relate the resonant frequency to wound size using an exponential model (R2 = 0.58-0.96). The next steps in sensor design and fabrication as well as the reading platform to achieve the goal of a universal calibration curve are then discussed.
Assuntos
Bandagens , Tecnologia sem Fio , Animais , Cães , Humanos , RatosRESUMO
Quantification of phenotypic heterogeneity present amongst bacterial cells can be a challenging task. Conventionally, classification and counting of bacteria sub-populations is achieved with manual microscopy, due to the lack of alternative, high-throughput, autonomous approaches. In this work, we apply classification-type convolutional neural networks (cCNN) to classify and enumerate bacterial cell sub-populations (B. subtilis clusters). Here, we demonstrate that the accuracy of the cCNN developed in this study can be as high as 86% when trained on a relatively small dataset (81 images). We also developed a new image preprocessing algorithm, specific to fluorescent microscope images, which increases the amount of training data available for the neural network by 72 times. By summing the classified cells together, the algorithm provides a total cell count which is on parity with manual counting, but is 10.2 times more consistent and 3.8 times faster. Finally, this work presents a complete solution framework for those wishing to learn and implement cCNN in their synthetic biology work.