Increased suicide risk among workers following toxic metal exposure at the Paducah gaseous diffusion plant from 1952 to 2003: a cohort study.

BACKGROUND: Suicide is a problem worldwide and occupation is an important risk factor. In the last decade, 55 200 deaths in the US were attributed to occupational risk factors. OBJECTIVE: To determine if toxic metal exposure was associated with suicide risk among Paducah gaseous diffusion plant (PGDP) workers. METHODS: We assembled a cohort of 6820 nuclear industry workers employed from 1952 to 2003. A job-specific exposure matrix (JEM) was used to determine metal exposure likelihood. Uranium exposure was also assessed by urinalysis. All suicide/self-injury International Classification for Disease (ICD) codes were used to identify suicides. Standardized mortality ratios (SMR), odds ratios (OR), and hazard ratios (HR) were used to estimate suicide risk. RESULTS: PGDP suicide victims typically were younger white men. Within exposure likelihood categories, several suicide SMRs were typically elevated for several metals. Only beryllium exposure likelihood was associated with an increased HR. Uranium urine concentration was associated with an elevated suicide risk after stratification by urinalysis frequency. CONCLUSION: Suicide risk is associated with uranium exposure.

Airway obstruction related to diacetyl exposure at microwave popcorn production facilities.

Obstructive lung diseases including bronchiolitis obliterans have been reported among microwave popcorn production employees. Butter flavourings including diacetyl have been associated with these findings. The present study was initiated at four microwave popcorn production plants to determine if exposure to diacetyl was associated with decrements in pulmonary function. Comprehensive diacetyl exposure assessment was undertaken for all job tasks. Spirometry was conducted for 765 full-time employees between 2005 and 2006. Outcomes included decrement in forced expiratory volume in one second (FEV(1)) % predicted, airway obstruction and persistent decline in FEV(1). Inclusion in the high-exposure group (mixers) prior to respirator use was associated with a significantly decreased FEV(1) % pred in non-Asian and Asian males at -6.1 and -11.8% pred, respectively, and an eight-fold increased risk for airway obstruction. Cumulative diacetyl exposure >or=0.8 ppm-yr caused similar results. No significant impact was seen in nonmixers or between current diacetyl exposure and persistent decline in FEV(1). Unprotected exposure as a mixer to butter flavouring including diacetyl resulted in decrements in FEV(1) (% pred) and increased airway obstruction. Control of employee exposure to butter flavouring additives is warranted in regard to both short-term peak and 8-h workday exposure.

Electron microscopy study of refractory ceramic fibers.

In epidemiological studies designed to identify potential health risks of exposures to synthetic vitreous fibers, the characterization of airborne fiber dimensions may be essential for assessing mechanisms of fiber toxicity. Toward this end, air sampling was conducted as part of an industry-wide study of workers potentially exposed to airborne fibrous dusts during the manufacture of refractory ceramic fibers (RCF) and RCF products. Analyses of a subset of samples obtained on the sample filter as well as on the conductive sampling cowl were performed using both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to characterize dimensions of airborne fibers. Comparison was made of bivariate fiber size distributions (length and diameter) from air samples analyzed by SEM and by TEM techniques. Results of the analyses indicate that RCF size distributions include fibers small enough in diameter (< 0.25 microm) to be unresolved by SEM. However, longer fibers (> 60 microm) may go undetected by TEM, as evidenced by the proportion of fibers in this category for TEM and SEM analyses (1% and 5%, respectively). Limitations of the microscopic techniques and differences in fiber-sizing rules for each method are believed to have contributed to the variation among fiber-sizing results. It was concluded from these data that further attempts to characterize RCF exposure in manufacturing and related operations should include analysis by TEM and SEM, since the smallest diameter fibers are not resolved with SEM and the fibers of longer length are not sized by TEM.

Reliability and validity of chest radiograph surveillance programs.

STUDY OBJECTIVES: Due to the lack of consensus in the literature in the use of posteroanterior (PA) vs PA with right and left oblique views as the optimum radiograph surveillance methodology to investigate pleural changes, a study was undertaken to evaluate the reliability, sensitivity, and specificity of these two approaches. DESIGN: Three experienced radiologist B readers used the 1980 International Labor Office classification system for pneumoconiosis to independently read chest radiographs of workers with individual identifiers masked. All radiographs were read first as a PA view only. Unknown to the B readers, each subject's PA was then matched to his or her corresponding right and left oblique views (film triad) and re-read several weeks later. SETTING AND PARTICIPANTS: The respiratory health of 652 workers exposed to refractory ceramic fiber was assessed as part of cross-sectional and longitudinal surveillance programs. MEASUREMENTS AND RESULTS: kappa Statistics for interreader and intrareader reliability between the PA view and film triad methods were calculated. Sensitivity, specificity, and positive predictive value were assessed by comparing the initial cross-sectional study to the longitudinal study. The film triad method had considerably higher interreader reliability (kappa = 0.59) compared to the PA-only method (kappa = 0.44). Results from the initial cross-sectional study were then compared to findings evaluated longitudinally. The film triad again was superior, demonstrating a positive predictive value of 73.7% compared to only 47.8% for the PA method. CONCLUSIONS: It is our recommendation that the film triad method be used in surveillance studies where both parenchymal and pleural changes are anticipated.

Lung cancer risk, silica exposure, and silicosis in Chinese mines and pottery factories: the modifying role of other workplace lung carcinogens.

BACKGROUND: Aims of our study were to explore whether and to what extent exposure to other lung carcinogens, or staging and clinical features of silicosis modify or confound the association between silica and lung cancer. METHODS: We used data from a nested case-control study, conducted in the late 1980s in 29 Chinese mines and potteries (10 tungsten mines, 6 copper and iron mines, 4 tin mines, 8 pottery factories, and 1 clay mine), that included 316 lung cancer cases and 1,356 controls, matched by decade of birth and facility type. The previous analysis of these data presented results by type of mine or factory. RESULTS: In our study, pooling all 29 Chinese work sites, lung cancer risk showed a modest association with silica exposure. Risk did not vary after excluding subjects with silicosis or adjusting the risk estimates by radiological staging of silicosis. Strong correlation among exposures prevented a detailed evaluation of the role of individual exposures. However, lung cancer risk was for the most part absent when concomitant exposure to other workplace lung carcinogens, such as polycyclic aromatic hydrocarbons (PAHs), nickel or radon-daughters, was considered. The cross classification of lung cancer risk by categories of exposure to respirable silica and total respirable dust did not show an independent effect of total respirable dust. Silicosis showed a modest association with lung cancer, which did not vary by severity of radiological staging, or by radiological evidence of disease progression, or by level of silica exposure. However, among silicotic subjects, lung cancer risk was significantly elevated only when exposure to cadmium and PAH had occurred. CONCLUSIONS: Our results suggest that, among silica-exposed Chinese workers, numerous occupational and non-occupational risk factors interact in a complex fashion to modify lung cancer risk. Future epidemiological studies on silica and lung cancer should incorporate detailed information on exposure to other workplace lung carcinogens, total respirable dust, and on surface size and age of silica particles to understand whether and to what extent they affect the carcinogenic potential of silica.

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.

Non-malignant respiratory diseases and lung cancer among Chinese workers exposed to silica.

The objective of this study was to explore whether a medical history for non-malignant respiratory disease contributes to an increased lung cancer risk among workers exposed to silica. We analyzed data from a nested case-control study in 29 dusty workplaces in China. The study population consisted of 316 lung cancer cases and 1356 controls matched to cases by facility type and decade of birth who were alive at the time of diagnosis of the index case and who were identified in a follow-up study of about 68,000 workers. Age at first exposure and cigarette smoking were accounted for in the analysis. Smoking was the main risk factor for both lung cancer and chronic bronchitis. Lung cancer risk showed a modest association with silicosis and with cumulative silica exposure, which did not vary by history of previous pulmonary tuberculosis. Among subjects without a medical history for chronic bronchitis or asthma, lung cancer risk was associated with silicosis (odds ratio [OR], 1.6; 95% confidence interval [CI], 1.1 to 2.2), and it was increased in each quartile of cumulative silica exposure. However, risk was not elevated in the highest quartile (OR, 1.3, 1.6, 1.8, 1.4). Among subjects with a medical history for chronic bronchitis or asthma, lung cancer risk was associated with neither silicosis (subjects with chronic bronchitis: OR, 0.6; subjects with asthma: OR, 0.4) nor with silica exposure. In this study population, we observed a modest association of both silicosis and cumulative exposure to silica with lung cancer among subjects who were not previously diagnosed with chronic bronchitis or asthma, but not among subjects who had a medical history for either disease. Risk of lung cancer associated with silicosis or cumulative exposure to silica did not vary by previous medical history of pulmonary tuberculosis.

Weight change and lung function: implications for workplace surveillance studies.

This study evaluated the relationship between weight change and longitudinal measurement of lung function among 361 men providing at least five pulmonary function tests. The men in this study were participants in a workplace pulmonary surveillance program for subjects with exposure to refractory ceramic fibers (RCFs). Occupational and environmental studies are generally designed to evaluate factors suspected of causing excess decline in lung function. Failure to adequately account for all significant factors may lead to erroneous conclusions regarding change in lung function. This study utilized two different statistical models to evaluate longitudinal changes in a cohort of RCF workers. What was unique to this study was the modeling of longitudinally measured initial weight, weight change, and longitudinal exposure before and during the period of observation. Results showed a strong relationship between weight gain and longitudinal loss in lung function that approximated forced vital capacity declines of 16 mL for every kilogram of weight gain per year in both models. This value is comparable or greater in magnitude and significance to other factors known to be inversely related to lung function, such as age and pack-years smoking to time of initial testing. In conclusion, weight gain was found to have a significant impact on longitudinal change in lung function. Therefore, weight gain becomes a very important variable that requires consideration whenever longitudinal studies of pulmonary function are conducted.

Potential significance of airborne fiber dimensions measured in the U.S. refractory ceramic fiber manufacturing industry.

BACKGROUND: To determine dimensions of airborne fibers in the U.S. refractory ceramic fiber (RCF) manufacturing industry, fibers collected through personal air sampling for employees at RCF manufacturing and processing operations have been measured. METHODS: Data were derived from transmission electron microscopy analyses of 118 air samples collected over a 20-year period. RESULTS: Characteristics of sized fibers include: diameter measurements of <60; 0.19 to 1.0 micron, m of which 75% are less than 0.6 micron and length ranging from < 0.6 to > 20 micron, with 68% of fibers between 2.4 and 20 micron. CONCLUSIONS: Exposures in RCF manufacturing include airborne fibers with dimensions (diameter < 0.1-0.4 micron, length < 10 micron) historically associated with biological effects in pleural tissues. Air sampling data and a review of studies relating fiber size to pleural effects in animals and humans support the belief that information on fiber dimensions is essential for studies with synthetic vitreous fibers.

An industry-wide pulmonary study of men and women manufacturing refractory ceramic fibers.

An industry-wide pulmonary morbidity study was undertaken to evaluate the respiratory health of employees manufacturing refractory ceramic fibers at five US sites between 1987 and 1989. Refractory ceramic fibers are man-made vitreous fibers used for high temperature insulation. Of the 753 eligible current employees, 742 provided occupational histories and also completed the American Thoracic Society respiratory symptom questionnaire; 736 also performed pulmonary function tests. Exposure to refractory ceramic fibers was characterized by classifying workers as production or nonproduction employees and calculating the duration of time spent in production employment. The risk of working in the production of refractory ceramic fibers and having one or more respiratory symptoms was estimated by adjusted odds ratios and found to be 2.9 (95 percent confidence interval 1.4-6.2) for men and 2.4 (95 percent confidence interval 1.1-5.3) for women. The effect of exposure to refractory ceramic fibers on forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), the ratio of the two (FEV1/FVC), and forced expiratory flow (liters/second) between 25 percent and 75 percent of the FVC curve (FEF(25-75)) was evaluated by multiple regression analysis using transformed values adjusted for height, by dividing by the square of each individual's height. For men, there was a significant decline in FVC for current and past smokers of 165.4 ml (p < 0.01) and 155.5 ml (p = 0.04), respectively, per 10 years of work in the production of refractory ceramic fibers. For FEV1, the decline was significant (p < 0.01) only for current smokers at 134.9 ml. For women, the decline was greater and significant for FVC among nonsmokers, who showed a decrease of 350.3 ml (p = 0.05) per 10 years of employment in the production of refractory ceramic fibers. These findings indicate that there may be important sex differences in response to occupational and/or environmental exposure.

Longitudinal estimates of pulmonary function in refractory ceramic fiber manufacturing workers.

Refractory ceramic fibers (RCF) are man-made vitreous fibers (MMVF) used in high-temperature industrial applications. Between 1987 and 1994, a prospective study evaluated pulmonary function of 361 male workers currently employed in RCF manufacturing and related operations for plausibility of a causal relationship between RCF exposure and pulmonary function changes. Workers included in the analysis provided at least five pulmonary function tests. The exposure-response relationship was modeled with two exposure variables: years in a production job, and cumulative fiber exposure (fiber-mo/cc). Comparison groups were nonproduction workers and workers with up to 15 fiber-mo/cc cumulative exposure. A statistically significant decrease in FVC was demonstrated among workers employed in production jobs more than 7 yr prior to initial test. A similar but nonstatistically significant result was demonstrated for FVC in workers with greater than 60 fiber-mo/cc cumulative exposure prior to initial pulmonary function test. Similar but nonstatistically significant results were obtained for FEV1. These findings, which primarily reflect workers employed before 1980, did not persist with analysis of follow-up production years and accumulated RCF exposure from initial pulmonary function test. Since longitudinal analyses are sensitive to influences that continue to affect annual decline during the study period, lower RCF exposure levels since the 1980s may be responsible for eliminating any further effect on pulmonary function.

A comparison of exposures to refractory ceramic fibres over multiple work shifts.

As part of an ongoing, industry-wide study in the manufacture of refractory ceramic fibres (RCF), time weighted average (TWA) exposures have been collected at five facilities according to a standardised protocol. Work activities were grouped into dust zones (DZs). Persons to be sampled were randomly selected according to a protocol designed to assure that at least one sample was collected annually from each DZ; each work shift is also sampled at least annually. TWA exposures calculated over a sampling period of at least 360 min were included in the data set. DZs were combined into one of three groups (DZGs): fibre production; vacuum processes; other. The data were analysed to identify any differences by DZG between airborne fibre exposures, by the shift worked at each facility, and across all facilities. There were no statistically significant shift-related differences detected between airborne fibre exposures across the five RCF facilities when analysed as a group. Within four of the facilities, no shift-related differences were detected between airborne fibre exposures; however, at one facility, first and third shift exposures were statistically different. No documentation related to job activities was found to account for the observation. The data generally support the use of a single exposure estimate for each DZG in each of these facilities, regardless of shift worked. Researchers reconstructing exposure and not able to determine the shift worked by study subjects may find these results useful, but are cautioned that substantial differences in exposure across shifts may exist in other types of manufacturing.

Time-weighted averages, peaks, and other indices of exposure in occupational epidemiology.

Dose surrogates commonly used in occupational epidemiology are exposure intensity, exposure duration, and cumulative exposure. The appropriateness of any of these measures as dose indicators depends on the nature of the induction process for the disease under consideration. Peak exposure intensity is often associated with acute health outcomes, whereas cumulative exposure is generally more relevant for diseases with long induction times, i.e., "chronic" diseases. However, there may be situations where peak exposure is etiologically relevant in chronic disease induction, such as might occur with nonlinear rates of damage during brief intervals of very high exposure. An approach is described for evaluating the effect of peak exposures in which peaks may be defined on a relative basis for each worker, or with respect to an absolute value, such as the permissible occupational exposure limit. The analytic strategy is illustrated with data from a case-control study of silicosis in relation to quantitative estimates of silica exposure. In this example, relative peak exposures and average non-peak exposures appear to be better predictors of silicosis risk than cumulative exposure.

Assessment of potential biases in the application of MSHA respirable coal mine dust data to an epidemiologic study.

Systematic errors in exposure data will result in biased estimates of the exposure-response relationship derived from epidemiologic analyses. Thus, adjustment of exposure data to account for identified errors may provide for a more accurate assessment of effect. In preparing to apply respirable coal mine dust exposure data collected by the Mine Safety and Health Administration (MSHA) to a study of the pulmonary status of underground coal miners, an assessment of potential systematic errors was undertaken. Potential errors stemming from adjustment of controls during sampling, concentration-dependent sampling, truncation of sampling results, identified sampling equipment problems, and a disproportionate number of low concentration samples in mine operator-collected samples were identified and evaluated. Methods to account for these errors and adjust mean exposures by mine, occupation, and year are given.