An Interference-Free Voltammetric Method for the Detection of Sulfur Dioxide in Wine Based on a Boron-Doped Diamond Electrode and Reaction Electrochemistry.

This paper describes a new, simple, and highly selective analytical technique for the detection of sulfur dioxide in wine, as a real sample with a relatively complicated matrix. The detection of the above analyte was based on the electrogeneration of iodine from iodide on a boron-doped diamond electrode, without modifications, in the presence of 0.1 mol dm-3 HClO4 as a supporting electrolyte. The electrogenerated iodine reacted with sulfur dioxide, forming iodide ions and sulfuric acid (i.e., a Bunsen reaction). The product of this reaction, the iodide ion, diffused back to the surface of the boron-doped diamond electrode and oxidized itself again. This chemical redox cycling enhanced the voltammetric response of the boron-doped diamond electrode. The selectivity of the determination was assured using NaOH and formaldehyde during sample preparation, and a blank was also measured and taken into account. The detection limit was estimated to be 10-6-10-7 mol dm-3. However, the content of sulfur dioxide in wine is significantly higher, which can lead to more accurate and reliable results.

A Review of Analytical Techniques for the Determination and Separation of Silver Ions and Its Nanoparticles.

Many articles have already been published dealing with silver ions and its nanoparticles, but mostly from the environmental and toxicological point of view. This article is a review focused on the various analytical techniques and detection platforms used in the separation and determination of mentioned above species, especially on the trace concentration level. Commonly used are optical methods because of their high sensitivity and easy automation. The separation methods are mainly used for the separation and preconcentration of silver particles. Their combination with other analytical techniques, mainly inductively coupled plasma mass spectrometry (ICP-MS) leads to very low detection limits of analysis. The electrochemical methods are also powerful and perspective mainly because of the fabrication of new sensors designed for silver determination. All methods may be combined with each other to achieve a synergistic improvement of analytical parameters with an impact on sensitivity, selectivity and reliability. The paper comprises a review of all three types of analytical methods on the determination of trace quantities of silver ions and its nanoparticles.

Electroanalytical Techniques for the Detection of Selenium as a Biologically and Environmentally Significant Analyte-A Short Review.

This short review deals with the properties and significance of the determination of selenium, which is in trace amounts an essential element for animals and humans, but toxic at high concentrations. It may cause oxidative stress in cells, which leads to the chronic disease called selenosis. Several analytical techniques have been developed for its detection, but electroanalytical methods are advantageous due to simple sample preparation, speed of analysis and high sensitivity of measurements, especially in the case of stripping voltammetry very low detection limits even in picomoles per liter can be reached. A variety of working electrodes based on mercury, carbon, silver, platinum and gold materials were applied to the analysis of selenium in various samples. Only selenium in oxidation state + IV is electroactive therefore the most of voltammetric determinations are devoted to it. However, it is possible to detect also other forms of selenium by indirect electrochemistry approach.

Voltammetric detection of antimony in natural water on cathodically pretreated microcrystalline boron doped diamond electrode: A possibility how to eliminate interference of arsenic without surface modification.

Very simple and fast electroanalytical method for the detection Sb(III) on chemically unmodified boron-doped diamond electrode (BDDE) has been developed. Voltammetric behavior of antimony was investigated in various acidic supporting electrolytes and the most suitable medium for the determination of Sb(III) on bare BDDE has been 6molL-1 HClO4 solution. The analytical performance was studied with differential pulse anodic stripping voltammetry (DPASV) with optimized conditions (deposition potential -1V vs. Ag/ AgCl and deposition time 240s). An analysis of possible effects due to the presence of other metal ions (especially As(III)) in the solution was eliminated using NaH2PO4 as supporting electrolyte with addition EDTA as selective complexing agent for Sb(III). Speciation of antimony was also investigated. The detection limit of this analytical strategy achieved value of 1.08 × 10-7molL-1. The proposed method was validated and applied for natural water from former antimony mines as real samples.

Voltammetric determination of caffeine in beverage samples on bare boron-doped diamond electrode.

A sensitive and selective electrochemical method for the caffeine determination using bare boron-doped diamond electrode was developed. It was found that caffeine provided highly reproducible and well-defined irreversible oxidation peak at very positive potential. The effects of supporting electrolyte, pH and scan rate on the voltammetric response of caffeine oxidation were studied to select the optimum experimental conditions. Linear response of peak current on the concentration in the range from 4×10(-7) to 2.5×10(-5)M, good repeatability (RSD of 2.1%) and detection limit of 1.5×10(-7)M without any chemical modifications and electrochemical surface pretreatment were evaluated. The effect of possible interferents appeared to be negligible which evidently proved very good selectivity. The proposed method was successfully applied for the caffeine determination in commercially available beverage samples, with results in a close statistical agreement to those declared by manufacturer and HPLC used as independent method.

Voltammetric determination of penicillin V in pharmaceutical formulations and human urine using a boron-doped diamond electrode.

Simple, sensitive and selective differential pulse voltammetric method for determination of penicillin V on a bare (unmodified) boron-doped diamond electrode has been developed. Penicillin V provided highly reproducible and well-defined irreversible oxidation peak at very positive potential of +1.6V (vs. Ag/AgCl). The optimum experimental conditions for oxidation of penicillin V were achieved in acetate buffer solution (pH 4.0). The modulation amplitude of 0.1V, modulation time of 0.05s and scan rate of 0.05Vs(-1) were selected as optimum instrumental parameters for differential pulse voltammetry. Linear response of peak current on the concentration in the range from 0.5 to 40µM with coefficient of determination of 0.999, good repeatability (RSD of 1.5%) and detection limit of 0.25µM were observed without any chemical modifications and electrochemical surface pretreatment. The effect of possible interferents such as stearic acid, glucose, urea, uric acid and ascorbic acid appeared to be negligible which evidently proved the good selectivity of method. The practical analytical utility of proposed method was demonstrated by determination of penicillin V in pharmaceutical formulations (tablets) and human urine samples with satisfactory recoveries (from 98 to 101% for tablets and 97 to 103% for human urine).

Indirect voltammetric detection of fluoride ions in toothpaste on a comb-shaped interdigitated microelectrode array.

A novel technique based on dynamic electrochemistry for the detection of fluoride ions was developed. It is based on its strong complexation with ferric ion. Formed fluoroferric complex is cathodically inactive at the potential of the reduction of free ferric aquo ion. The voltammetric and amperometric response of platinum comb-shaped interdigitated microelectrode array is decreased after fluoride addition. This decrease serves for the quantification of fluoride ions added to the solution. The detection limit of 4.5×10(-5) mol dm(-3) was achieved when one of the segments of interdigitated microelectrode array (IDA) was used as an indicating electrode. The detection limit is about one order of magnitude lower than in the case of conventional platinum macroelectrode. In comparison with ISE electrodes this method is faster and also avoiding large error resulting from the antilogarithmization of ISE Nerstian response. The method was applied to the analysis of toothpaste.