Orientation-distribution mapping of polycrystalline materials by Raman microspectroscopy.

Raman microspectroscopy provides the means to obtain local orientations on polycrystalline materials at the submicrometer level. The present work demonstrates how orientation-distribution maps composed of Raman intensity distributions can be acquired on large areas of several hundreds of square micrometers. A polycrystalline CuInSe2 thin film was used as a model system. The orientation distributions are evidenced by corresponding measurements using electron backscatter diffraction (EBSD) on the same identical specimen positions. The quantitative, local orientation information obtained by means of EBSD was used to calculate the theoretical Raman intensities for specific grain orientations, which agree well with the experimental values. The presented approach establishes new horizons for Raman microspectroscopy as a tool for quantitative, microstructural analysis at submicrometer resolution.

Enhancements in specimen preparation of Cu(In,Ga)(S,Se)2 thin films.

When producing slices from Cu(In,Ga)(S,Se)(2) thin films for solar cells by use of a focused ion beam (FIB), agglomerates form on the Cu(In,Ga)(S,Se)(2) surfaces, which deteriorate substantially the imaging and analysis in scanning electron microscopy. Similar problems are also experienced when depth-profiling Cu(In,Ga)(S,Se)(2) thin films by means of glow-discharge or secondary ion mass spectrometry. The present work shows that the agglomerates are composed of (mainly) Cu, and that their formation may be impeded considerably by either cooling of the sample or by use of reactive gases during the ion-beam sputtering. The introduction of XeF(2) during FIB slicing resulted in excellent images, in which the microstructures of most layers in the Cu(In,Ga)(S,Se)(2) thin film stack are visible, including the microstructure of the 20 nm thin MoSe(2) layer. Acquisition of high-quality two-dimensional and also three-dimensional electron backscatter diffraction data was possible. The present work gives a basis for enhanced SEM imaging and analysis not only in the case of Cu(In,Ga)(S,Se)(2) thin films but also when dealing with further material systems exhibiting similar formations of agglomerates.