Effect of group and individual education on shade matching competency of dental students.

PURPOSE: To evaluate the influence of group and individual education on shade matching quality using a visual color competency test to match shade tab pairs from two Vita classical A1-D4 shade guides. METHODS: 60 dental students, 21-25 years old (39 females, 21 males) participated in the study. All participants passed a color deficiency test before the experiment. The examination was voluntary and approved by the corresponding Ethics Committee. Students were randomly divided into three groups (n=20): one control group, NE (no education) and two experimental groups - GE (group education) and IE (individual education). The study was performed in three phases. In the "before" (B - Phase 1) and "after" (A - Phase 3) phase, all groups had to match 16 pairs of tabs from two Vita classical A1-D4 shade guides, with the shade designations hidden by custom letter markings. All tabs were mixed on a gray surface illuminated by color-correcting light. In Phase 2 (between B and A), GE had only group education, while IE received additional individual education and training. The control group did not participate in Phase 2. Means and standard deviations were calculated, and differences were compared using the one-way ANOVA, ANCOVA test, and Student t-test for dependent samples (α= 0.05). RESULTS: The NE group matched 10.3 (3.2) and 10.4 (2.9) tab pairs in the before and after phases, respectively. Corresponding results for GE were 11.1 (2.2) and 14.4 (1.9) and 9.5 (3.6) and 15.0 (1.5) for IE, respectively. In Phase 1 (B), no statistically significant difference was recorded among the groups (P= 0.260). The experimental groups achieved a statistically significant improvement compared with the control group in Phase 3 (A) (P< 0.001). Both experimental groups achieved statistically significant improvement within the group after education, GE (P< 0.001) and IE (P< 0.001). Within the limitations of this study, it was concluded that both experimental groups had statistically significant progress in shade matching. The group that received individual education (IE) made statistically significant progress compared with the group that received group education (GE). No statistically significant difference was found in the results of the control group between Phase 1 and Phase 3 of the study. CLINICAL SIGNIFICANCE: Improving the shade matching ability facilitates the work of dentists and dental technicians and enhances the esthetics of dental restorations.

Influence of individual education and training on quality of color matching in dentistry.

OBJECTIVES: To evaluate the influence of the group and individual education of students on shade matching quality. Secondary study objective included a survey-assessment of quality and difficulty level of color matching. MATERIALS AND METHODS: Forty dental student participants in Integrated Academic Studies of Dentistry at the Faculty of Medicine, University of Nis (26 female, 14 male) 21-25 years old, signed consent to voluntarily participate in the research. The Ethics Committee of the Clinic of Dentistry, Faculty of Medicine, University of Nis, approved the study under number 14/11-2019-2EO. They were randomly divided into two groups (n = 20), experimental (IE, individual education) and control (GE, group education). Each group was divided into four subgroups (n = 5). The study was performed in three phases. In Phase I (I) and III (III), students matched the shade of the maxillary central left incisor (#9) using three different shade guides. Each of the students served as a "patient" for shade matching, while the other members of the subgroup, individually (VMI ) and as a team (VMT ), visually matched the tooth shade. In Phase II (between phases I and III), group IE received standard group and individual education and training, while group GE had only group education. Shade matching results in before and after education were compared with results obtained by an intraoral spectrophotometer. CIELAB (∆E*), and CIDE2000 color differences (∆E00 ) were calculated. The color differences between VMI or VMT and ES readings were graded. In addition, the students rated the level of difficulty and quality of shade matching from 1 to 5, signifying the most to least difficult, and the worst to best match, respectively. Means and standard deviations were calculated. Differences were compared using the Student t-test. RESULTS: Means (s.d.) of CIEDE2000 color differences for VMI before and after IE were 4.5 (1.5) and 3.3 (0.9), respectively. Corresponding values for group GE were 4.4 (1.4) and 4.0 (1.0), respectively. As compared with GE, group IE achieved 15% better results for the best matches and 27.5% for one of the three best matches in by-point comparison. Mean (s.d.) results for VMT in the experimental group before and after IE were 3.6 (2.4) and 2.8 (1.6), respectively. Corresponding results for the control group were 4.4 (2.1) and 3.5 (1.7), respectively. Group IE had statistically higher VMI and VMT scores than GE, while, for GE, only VMT scores were statistically higher. Group IE achieved better results in by-point comparison. After education and training, the students rated the shade matching as more precise and less difficult. Results were significantly better for Quality (IE) (sig = 0.010) and Difficulty (GE) (sig = 0.021). CONCLUSIONS: Within the limitations of the study, the experimental group achieved significantly better results in individual color matching after education and training than the control group, while both groups made progress in team color matching. Both groups rated shade matching more accurate and easier after education. CLINICAL SIGNIFICANCE: Improving the quality of shade matching is expected to enhance the esthetics of dental restorations, increase patient satisfaction, and reduce color corrections.

Personality traits and attitude towards euthanasia among medical students in Serbia.

OBJECTIVE: Various factors may influence the attitudes of medical students towards euthanasia, including personal values, beliefs, and personality traits. The objective of this study was to examine the attitudes of 2nd and 5th year medical students about euthanasia and the relationship between these attitudes and students' personality traits. METHODS: Medical students from the Universities of Kragujevac and Belgrade, Serbia, participated in this study. A questionnaire was administered assessing attitudes toward euthanasia and student personality traits (honesty-humility, emotionality, extraversion, agreeableness, conscientiousness, and openness using the HEXACO-60). RESULTS: More than 50% of students in the second year and 60% of students in the fifth year were supportive of euthanasia. Students in the 5th year were 2.5 times more likely to express a concern that euthanasia needs to be clearly regulated by law compared to students in the second year. Adjusted analyses indicated that lower levels of honesty-humility and emotionality were positively correlated with students' belief that euthanasia should be legalized. CONCLUSION: Many medical students in Serbia have a positive attitude towards euthanasia. It is important to consider the possible influences of culture, religion, and the law on attitudes towards euthanasia. Undergraduate medical training should include more hours dedicated to palliative care and end-of-life topics to raise awareness of patients' preferences in this regard.

Supercritical fluid technology as a strategy for nifedipine solid dispersions formulation: In vitro and in vivo evaluation.

Supercritical fluid technology (SFT) is an insufficiently investigated approach for the production of solid dispersions, it is environmentally acceptable and has a high potential for application in the pharmaceutical industry. The aim of this work was to formulate and characterize nifedipine solid dispersions (SDs) produced by the SFT and compare the results with ones obtained by the classical solvent based kneading method. The following in vitro tests were conducted: assay and yield, solvent residues, solid state characterization (FTIR, DSC, XRD), flowability, hygroscopicity, solubility, dissolution and stability. Additionally, bioavailability was examined on an animal model (Wistar rats). The formulation selection for in vivo study was performed using the multilevel categoric experimental design and the health risk assessment. Solid state characterization revealed that formulation obtained by the SFT method and higher ratio of polymer (1:5) have had nifedipine in completely amorphous form. Polymer ratio and method of SDs preparation do influence the investigation characteristics. Dissolution rate was fastest in SDs prepared by the SFT and higher polymer ration (1:5). In vivo data of selected SDs prepared by the kneading (ratio 1:1) and the SFT (ratio 1:5) showed alteration in pharmacokinetic profile after i.v. and p.o. application.

Factor structure of the brief psychiatric rating scale-expanded among outpatients with psychotic disorders in five Southeast European countries: evidence for five factors.

The Brief Psychiatric Rating Scale (BPRS) is a useful tool for measuring the severity of psychopathological symptoms among patients with psychosis. Many studies, predominantly in Western countries, have investigated its factor structure. This study has the following aims: (a) to further explore the factor structure of the BPRS-Expanded version (BPRS-E, 24 items) among outpatients with psychotic disorders in Southeast European countries; (b) to confirm the identified model; and (c) to investigate the goodness-of-fit of the three competing BPRS-E factor models derived from previous studies. The exploratory factor analysis (EFA) produced a solution with 21 items grouped into five factors, thus supporting the existence of a fifth factor, i.e., Disorganization. A follow-up confirmatory factor analysis (CFA) revealed a 19-item model (with two items removed) that fit the data well. In addition, the stability of two out of three competing factor models was confirmed. Finally, the BPRS-E model with 5 factors developed in this cross-national study was found to include a greater number of items compared to competing models.

Dental Resin-Based Luting Materials-Review.

As cementation represents the last stage of the work involved in making various indirect restorations (metal ceramic crowns and bridges, full ceramic crowns and bridges, inlays, onlays, and fiber posts), its quality significantly contributes to the clinical success of the therapy performed. In the last two decades, the demand for ceramic indirect restorations in everyday dental practice has considerably increased primarily due to the growing significance of esthetics among patients, but also as a result of hypersensitivity reactions to dental alloys in some individuals. In this context, it is essential to ensure a permanent and reliable adhesive bond between the indirect restoration and the tooth structure, as this is the key to the success of aesthetic restorations. Resin-based luting materials benefit from excellent optical (aesthetic) and mechanical properties, as well as from providing a strong and durable adhesive bond between the restoration and the tooth. For this reason, resin cements are a reliable choice of material for cementing polycrystalline ceramic restorations. The current dental material market offers a wide range of resin cement with diverse and continually advancing properties. In response, we wish to note that the interest in the properties of resin-based cements among clinicians has existed for many years. Yet, despite extensive research on the subject and the resulting continued improvements in the quality of these materials, there is still no ideal resin-based cement on the market. The manuscript authors were guided by this fact when writing the article content, as the aim was to provide a concise overview of the composition, properties, and current trends, as well as some future guidelines for research in this field that would be beneficial for dental practitioners as well as the scientific community. It is extremely important to provide reliable and succinct information and guidelines for resin luting materials for dental dental practitioners.

Temperature-Sensitive Hydrogels as Carriers for Modulated Delivery of Acetaminophen.

The purposes of this study are the polymerization of temperature-sensitive copolymers based on N-isopropyl acrylamide and 10 mol % of 2-hydroxypropylmethacrylate, characterisations of their thermal, morphological and swelling properties, as well as the analysis of potential application in drug-delivery systems. Acetaminophen, the representative of non-steroidal anti-inflammatory drugs, was used as a model drug in this study. It is a common pain relief drug, which is also used for fever treatment. However, oral administration comes with certain health risks, mainly the overdose and frequent administration of up to four times a day. The goal of applying temperature-sensitive hydrogel is to enable extended administration once a day, depending on the body temperature. The swelling behavior of the obtained poly(N-isopropyl acrylamide-co-2-hydroxypropylmethacrylate) (p(NIPA/HPMA)) hydrogels and their temperature-sensitivity, kinetics and order of swelling processes at 18 and 38 °C were analyzed. The thermal properties of these hydrogels were observed by the DSC method, and the obtained thermograms showed both melting and glass transitions. The drug delivery system of p(NIPA/HPMA) hydrogels with loaded acetaminophen was analyzed using scanning electron microscopy and Fourier transform infrared spectroscopy methods. Structural analysis of FTIR spectra indicates that non-covalent intermolecular interactions of the type of hydrogen bonds were formed among functional groups of acetaminophen and side-chains of p(NIPA/HPMA) hydrogels. The surface structure of p(NIPA/HPMA) hydrogels after drug loading indicates the acetaminophen presence into the pores of the hydrogel network, and their loading efficiency was higher than 92%. Qualitative and quantitative analysis of acetaminophen, determined by the high-pressure liquid chromatography method, showed that about 90-99% of the loaded amount was released from p(NIPA/HPMA) hydrogels within 24 h. Kinetic parameters of the acetaminophen release under simulated gastrointestinal conditions were determined. Based on obtained results, the drug delivery system of temperature-sensitive p(NIPA/HPMA) hydrogels with loaded acetaminophen could be suitable for additional investigation for modulated drug administration, e.g., for extended drug administration.

The Influence of Soft Segment Structure on the Properties of Polyurethanes.

A series of polyurethanes (PU) were synthesised via one-step polymerisation without a chain extender, using toluene diisocyanate as well as a variety of soft segments composed of different macrodiols. Poly(D,L-lactide) (PDLLA) and polycaprolactone diol (PCL) were synthesised as a polyester type polyols to obtain soft segments. The process of varying the molar ratio of newly synthesised PDLLA in soft segments has been confirmed as a powerful tool for fine-tuning the final properties of PU. Fourier-transformed infrared spectroscopy was used for evaluation of molecular structures of synthesised PDLLA polyol and final PU. Nuclear magnetic resonance spectrometry was used to confirm the presumed structure of PU. The influence of soft segment composition on polyurethane thermal characteristics was examined using thermogravimetric analysis and differential scanning calorimetry. The composition of soft segments had little impact on the thermal stability of PU materials, which is explained by the comparable structures of both polyester polyols. Wide-angle X-ray scattering was utilised to evaluate the effect of amorphous PDLLA on the degree of crystallinity of PCL in soft PU segments. It was discovered that not only did the PDLLA ratio in the soft segment have a substantial influence on the degree of microphase separation in the soft and hard segments, but it also influenced the crystallisation behaviour of the materials. Furthermore, the restriction of crystallisation of the PCL soft segment has been verified to be dependent on the hard segment concentration and the ratio of PDLLA/PCL polyols. The sample with pure PCL as the polyol component achieved the highest degree of crystallinity (34.8%). The results demonstrated that the composition of soft segments directly affected the properties of obtained polyurethane films. These results can be utilised to easily achieve a desirable set of properties required for application in biomaterials.

The chemical characterisation of nettle (Urtica dioica L.) seed oil.

The past decade has seen increasing interest in plant oils in the food, pharmaceutical, and cosmetic industries due to their diverse functional and nutritional properties, as well as the high levels of consumer acceptance. As a result, there has been a spike in research interest in finding new sources of oils with good potential for industrial use. In this paper, the chemical characterisation (saponification, iodine, acid and ester numbers, as well as fatty acid composition) of nettle seed oil was given. Oil was analysed for its thermooxidative stability by differential scanning calorimetry. The kinetic parameters of oxidation (Ea, A, and k) were also determined. The results showed that nettle seed oil belongs to the group of edible oils of the linoleic type and it is nutritionally highly valuable, it has pronounced thermooxidative stability and could be an alternative source of raw material for the food, cosmetics, and other non-food industries.

Development of Light-Polymerized Dental Composite Resin Reinforced with Electrospun Polyamide Layers.

As the mechanical properties of resin-based dental composite materials are highly relevant in clinical practice, diverse strategies for their potential enhancement have been proposed in the extant literature, aiming to facilitate their reliable use in dental medicine. In this context, the focus is primarily given to the mechanical properties with the greatest influence on clinical success, i.e., the longevity of the filling in the patient's mouth and its ability to withstand very strong masticatory forces. Guided by these objectives, the goal of the present study was to ascertain whether the reinforcement of dental composite resins with electrospun polyamide (PA) nanofibers would improve the mechanical strength of dental restoration materials. For this purpose, light-cure dental composite resins were interspersed with one and two layers comprising PA nanofibers in order to investigate the influence of such reinforcement on the mechanical properties of the resulting hybrid resins. One set of the obtained samples was investigated as prepared, while another set was immersed in artificial saliva for 14 days and was subsequently subjected to the same set of analyses, namely Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). Findings yielded by the FTIR analysis confirmed the structure of the produced dental composite resin material. They also provided evidence that, while the presence of PA nanofibers did not influence the curing process, it strengthened the dental composite resin. Moreover, flexural strength measurements revealed that the inclusion of a 16 µm-thick PA nanolayer enabled the dental composite resin to withstand a load of 3.2 MPa. These findings were supported by the SEM results, which further indicated that immersing the resin in saline solution resulted in a more compact composite material structure. Finally, DSC results indicated that as-prepared as well as saline-treated reinforced samples had a lower glass transition temperature (Tg) compared to pure resin. Specifically, while pure resin had a Tg of 61.6 °C, each additional PA nanolayer decreased the Tg by about 2 °C, while the further reduction was obtained when samples were immersed in saline for 14 days. These results show that electrospinning is a facile method for producing different nanofibers that can be incorporated into resin-based dental composite materials to modify their mechanical properties. Moreover, while their inclusion strengthens the resin-based dental composite materials, it does not affect the course and outcome of the polymerization reaction, which is an important factor for their use in clinical practice.

Analysis of the Relationship between Higher-Order Factor Structure of Personality Disorders and the Five-Factor Model of Personality.

The growing body of evidence on the dimensional classification of personality disorders (PD) has resulted in its acceptance in the ICD-11 classification, which abolished categories and retains only a general description of PD. Specifying the type of PD is optional, and the suggested domains represent maladaptive variants of the five-factor model of personality (FFM). The aim of our study was to explore the existence of a joint structure between maladaptive and normal personality traits, and to investigate how these structures are integrated. The study included 223 patients who had been diagnosed with PD and completed the Structured Clinical Interview for DSM-5 Personality Disorders and the NEO Personality Inventory-Revised (NEO-PI-R). To determine the degree of overlap between PD domains and NEO PI-R scales, a canonical analysis of covariance was conducted. Our findings showed a relationship between the internalizing PD spectrum (consisting of avoidant, dependent, and borderline traits with detached and anankastic traits) and high neuroticism, low conscientiousness, and moderately low agreeableness and extroversion, suggesting the existence of a broad personality disorder factor. However, the internalizing dimensions exhibited a more pronounced effect within this construct. Furthermore, we identified a second function that demonstrated a link between the externalizing PD spectrum (including narcissistic, histrionic, and antisocial traits) and high extraversion, high openness, and low agreeableness, suggesting the existence of an externalizing factor. Overall, our findings provide evidence for a joint structure of maladaptive and normal personality traits in a sample of personality disorders and emphasize the importance of integrating the FFM model in PD evaluation in clinical practice, suggesting that differentiating between major subgroups could assist in adjusting therapeutic approaches.

Do people diagnosed with psychosis spectrum disorders share the same personality space as the general population? Big Five complemented by the proneness to psychotic-like experiences/behaviors.

OBJECTIVE: Disintegration is a recently proposed broad, trait-like reconceptualization of the proneness to psychotic-like experiences/behaviors. METHODS: We tested the assumption that the 6-factor model (Five-Factor traits plus Disintegration) was the most adequate one and that it was invariant across clinical and non-clinical populations. The clinical sample (n = 161) consisted of patients who had at least one psychotic episode, duration of illness less than 10 years, currently in remission. The general population (n = 409) was matched with the patient sample by age, gender, and education. NEO PI-R and DELTA were used to measure personality dimensions in both samples. Invariance of one to six-factor solutions was tested by Exploratory Structural Equation Modeling. RESULTS: We found that: (a) several criteria for deciding on the number of factors to retain converged to the conclusion that the assumed 6-factor model was the most adequate one, (b) the assumed factorial structure appeared to satisfy the criteria for the scalar invariance across the two samples, (c) all nine Disintegration subdimensions separated from the Big Five, forming the Disintegration factor, and (d) Disintegration was unrelated to Openness. CONCLUSION: The Big Five personality structure-complemented with disintegration-was invariant across individuals from the general population and patients with psychosis.

Biomedical Applications of Thermosensitive Hydrogels for Controlled/Modulated Piroxicam Delivery.

The objectives of this study are the synthesis of thermosensitive poly(N-isopropylacrylamide-co-2-hydroxypropyl methacrylate), p(NiPAm-HPMet), hydrogels and the analysis of a drug-delivery system based on piroxicam, as a model drug, and synthesized hydrogels. A high pressure liquid chromatography method has been used in order to determine both qualitative and quantitative amounts of unreacted monomers and crosslinkers from polymerized hydrogels. Swelling kinetics and the order of a swelling process of the hydrogels have been analyzed at 10 and 40 °C. The copolymers' thermal properties have been monitored by the differential scanning calorimetry (DSC) method. DSC termograms have shown that melting occurs in two temperature intervals (142.36-150.72 °C and 153.14-156.49 °C). A matrix system with incorporated piroxicam has been analyzed by using FTIR and SEM methods. Structural analysis has demonstrated that intermolecular non-covalent interactions have been built between side-groups of copolymer and loaded piroxicam. Morphology of p(NiPAm-HPMet) after drug incorporation indicates the piroxicam presence into the copolymer pores. Kinetic parameters of the piroxicam release from hydrogels at 37 °C and pH 7.4 indicate that the fluid transport mechanism corresponds to Fickian diffusion. As a result, formulation of thermosensitive p(NiPAm-HPMet) hydrogels with incorporated piroxicam could be of interest for further testing as a drug carrier for modulated and prolonged release, especially for topical administration.

Preliminary Assessment of Pre-Electroconvulsive Therapy Evaluation Practices in European Countries: The Need for Guidelines.

OBJECTIVES: Pre-electroconvulsive therapy (ECT) evaluation is an essential part of ECT preparation, a standard treatment in the psychiatric field. However, no routine pre-ECT evaluation has been published so far. This preliminary study aimed to explore different practices in pre-ECT evaluation across European countries. METHODS: The data were collected as a snowball sample approach using an online survey from September 2019 to April 2020. The final analysis included data from 18 clinics placed in 16 European countries. RESULTS: Regulations on the pre-ECT evaluation were found in 9 countries. All clinics reported doing complete blood count, serum electrolytes, and renal function analysis as a part of regular laboratory testing, alongside with a cardiovascular assessment. Ten clinics reported using psychiatric scales. Six clinics reported doing a cognitive assessment, of which all had regulations on the pre-ECT evaluation. Not one evaluation had the same sets of procedures and diagnostics. CONCLUSIONS: The differences in assessment approaches mirror high variability of the pre-ECT evaluation practice across Europe. Cognitive assessment and objectification of psychiatric symptoms should be a regular part of the pre-ECT evaluation because of the monitoring of the most common adverse effect and observing the clinical response to ECT. Standardization of the pre-ECT evaluation and ECT in general would remove criticisms and opposition to the treatment, make it based on the best of our knowledge, and provide a method respectful of patients' best interests and rights.

Maintenance Therapy of Psychosis Spectrum Disorders in a Real-World Setting: Antipsychotics Prescription Patterns and Long-Term Benzodiazepine Use.

Background: Maintenance therapy of patients with primary psychosis spectrum disorders (PSD) in the Western Balkans has received limited interest so far. The present study aimed to investigate long-term prescription patterns among outpatients with PSD. Methods: Information about prescription of antipsychotics (AP), benzodiazepines (BZD) and other psychotropic medication over a 6-month period was collected from outpatients (n = 134; ICD-10 diagnosis F20-29) recruited by a larger multi-site study, to find mean daily number of psychotropic drugs, AP prescription patterns (including AP daily dose, route of administration, monotherapy vs. polypharmacy) and BZD utilization (long-term add-on BZD therapy). Additionally, sex-differences in the variables were explored. Results: Clinically stable outpatients (age 41.7 ± 11.0; male 62.7%; duration of untreated illness 12.7 ± 8.7 years; mean number of lifetime hospitalizations 2.6 ± 0.7) were prescribed 2.8 ± 1.1 psychotropic medications daily. The mean 6-month AP dose was 14.2 ± 7.8 mg olanzapine equivalents. Long-acting injectable AP was prescribed to 25.2% of the patients. Long-term AP monotherapy was found in 52.7% patients and most of them were prescribed second generation AP (65.2%). Long-term AP polypharmacy (42.7%) was more common in males (p = 0.015). The most frequent co-prescription patterns were first generation AP plus clozapine. The highest rate of long-term AP co-prescription was found for BZD (in 42.7% cases, average 6-months daily dose of 2.8 ± 2.7 mg lorazepam equivalents) and anticholinergics (33.6%). Conclusion: Existing appropriately designed interventions aiming to safely switch the inappropriate therapeutic regimens, i.e. very high prevalence of long-term AP polypharmacy and non-rational BZD co-prescription, should be implemented in the region of Western Balkans.

Corrigendum: Structure of Negative Symptoms in Schizophrenia: An Unresolved Issue.

[This corrects the article DOI: 10.3389/fpsyt.2021.785144.].

Electrospun Poly(lactide) Fibers as Carriers for Controlled Release of Biochanin A.

The aim of this study is to investigate the possibility of using electrospun polylactide (PLA) fibers as a carrier of the phytoestrogen biochanin A. Polylactide fibers were prepared with different contents of biochanin A by using an electrospinning method at specific process parameters. The obtained electrospun polylactide fibers, as carriers of biochanin A, were characterized by means of different methods. The presented results showed that the mechanical properties of PLA have not changed significantly in the presence of biochanin A. Scanning electron microscopy showed that the fine fiber structure is retained without visible deformations and biochanin A crystals on the surface of the fibres. The analysis by infrared spectroscopy showed that there are no strong interactions between polylactide and biochanin A molecules, which is a good prerequisite for the diffusion release of biochanin A from PLA fibers.The release of biochanin A from PLA fibers in buffer solution pH 7.4 at 37 °C was monitored by applying the HPLC method. The rate and time of the release of biochanin A from PLA fibers is in correlation with the amount of the active ingredient in the matrix of the carrier and follows zero-order kinetics. PLA fibers with biochanin A exhibit concentration-dependent activity on proliferation and migration of L929 fibroblasts in direct culture system in vitro, and proved to be suitable for a potential formulation for use in wound healing.

Influence of Dimethacrylate Monomer on the Polymerization Efficacy of Resin-Based Dental Cements-FTIR Analysis.

The degree of polymerization for dimethacrylate resin-based materials (BisGMA, TEGDMA, UDMA, HEMA) ranges from 55 to 75%. Literature data indicate that polymerization efficacy depends, among other factors, on the type of methacrylate resin comprising the material. The aim of this study was to evaluate the polymerization efficacy of four dental cement materials characterized by different polymerization mechanisms using FTIR analysis. In the present study, the FTIR method was adopted to analyze the degree of polymerization efficacy of four resin-based dental cement materials, two of which were self-cured and two were dual-cured cements. The IR spectral analysis was performed 24 h after the polymerization of the cementitious material. RelyX ARC cement exhibits the lowest polymerization efficacy (61.3%), while that of Variolink II (85.8%) and Maxcem Elite is the highest (90.1%). Although the efficacy of self-cured cements appears to be superior, the difference is not statistically significant (p = 0.280). Polymerization efficacy largely depends on the chemical structure of the material in terms of the presence of a particular methacrylate resin and less on the polymerization mechanism itself, i.e., whether it is a self-cured or dually cured dental cement. Thus, in clinical practice, cementitious materials with a higher proportion of TEGDMA compared with BisGMA are recommended.

Electrospun PEO/rGO Scaffolds: The Influence of the Concentration of rGO on Overall Properties and Cytotoxicity.

Reduced graphene oxide (rGO) is one of the graphene derivatives that can be employed to engineer bioactive and/or electroactive scaffolds. However, the influence of its low and especially high concentrations on scaffolds' overall properties and cytotoxicity has yet to be explored. In this study, polyethylene oxide (PEO)-based scaffolds containing from 0.1 to 20 wt% rGO were obtained by electrospinning. Morphological, thermal and electrical properties of the scaffolds were characterized by SEM, Raman spectroscopy, XRD, DSC and electrical measurements. The diameter of the fibers decreased from 0.52 to 0.19 µm as the concentration of rGO increased from 0.1 wt% to 20 wt%. The presence of rGO above the percolation threshold (5.7 wt%) resulted in a significantly reduced electrical resistivity of the scaffolds. XRD and Raman analysis revealed delamination of the graphene layers (interlayer spacing increased from 0.36 nm to 0.40-0.41 nm), and exfoliation of rGO was detected for the samples with an rGO concentration lower than 1 wt%. In addition, an evident trend of increasing cell viability as a function of the rGO concentration was evidenced. The obtained results can serve as further guidance for the judicious selection of the rGO content incorporated into the PEO matrix for constructing electroactive scaffolds.

Treatment of Symptom Clusters in Schizophrenia, Bipolar Disorder and Major Depressive Disorder With the Dopamine D3/D2 Preferring Partial Agonist Cariprazine.

Cariprazine is currently approved for the treatment of patients with schizophrenia (USA and EU), and for manic, depressive, and episodes with mixed features in bipolar I disorder (USA): several randomized controlled studies have also explored its efficacy in patients with major depressive disorder. This review summarizes its current therapeutic uses and potential advantages for treating the main symptoms of schizophrenia, bipolar I and major depressive disorder, considering its pharmacodynamic properties, efficacy, and tolerability. Its predominantly D3 receptor preferring affinity, with functional selectivity according to the prevailing neuronal environment, contributes to its efficacy across a wide array of psychopathological symptoms (including reality distortion, disorganized thought, negative symptoms, mood disturbance, anhedonia, and cognitive impairment), and to a favorable side effect profile. Cariprazine may be a "drug of choice" in patients with predominant negative and cognitive symptoms of schizophrenia, as well as those with metabolic syndrome. Further investigation of its relative efficacy when compared to aripiprazole or other active comparators is warranted. Its effectiveness in the treatment of bipolar mania, bipolar I depression and bipolar I episodes with mixed features, with minimal accompanying metabolic changes is well-established. The longer half-life and delayed time to relapse in patients diagnosed with schizophrenia when compared to other second-generation antipsychotics represent other advantages, given the high rates of non-adherence and frequent relapses seen in clinical practice. Its efficacy in overlapping symptom domains in other major psychiatric disorders appears promising.