RESUMO
Catalytic π-arene activation is based on catalysts that allow for arene exchange. To date, cyclopentadiene (Cp)-derived catalysts are the most commonly used in π-arene activation despite their low arene exchange rates. Herein, we report the synthesis, analysis, and catalytic application of Ru(II) complexes supported by phenoxo ligands, which are isolobal alternatives to Cp. The phenoxo complexes exhibit arene exchange rates significantly faster than those of the corresponding Cp complexes. The rate can be further increased through the choice of appropriate counterions. The mechanism of the arene exchange process is elucidated by kinetic and computational analyses. We demonstrate the utility of the new catalysts through an SNAr reaction between fluorobenzene and alcohols, including secondary alcohols that could not be used previously in related reactions. Moreover, the catalytic thermal decarboxylation of phenylacetic acids is presented.
RESUMO
Aryldiazonium salts remain a staple in organic synthesis and are still prepared largely in accord with the protocol developed in the 19th century. Because of the favorable reactivity that often cannot be achieved with other aryl(pseudo)halides, diazonium chemistry continues to grow. Facile extrusion of dinitrogen contributes to the desired reactivity but is also reason for safety concerns. Explosions have occurred since the discovery of these reagents and still result in accidents. In this study, we report a diazonium chemistry paradigm shift based on nitrate reduction using thiosulfate or dihalocuprates as electron donors that avoids diazonium accumulation. Because nitrate reduction is rate-limiting, aryldiazoniums are produced as fleeting intermediates, which results in a safer and often more efficient deaminative halogenation in a single step from anilines.
RESUMO
A visible-light-induced, three-component palladium-catalyzed 1,4-aminoarylation of butadienes with readily available aryl halides and aliphatic amines has been developed, affording allylamines with excellent E-selectivity. The reaction exhibits exceptional control over chemo-, regio-, and stereoselectivity, a broad substrate scope, and high functional group compatibility, as demonstrated by the late-stage functionalization of bioactive molecules. Mechanistic investigations are consistent with a photoinduced radical Pd(0)-Pd(I)-Pd(II)-Pd(0) Heck-Tsuji-Trost allylation cascade.
RESUMO
Cysteine conjugation is an important tool in protein research and relies on fast, mild and chemoselective reactions. Cysteinyl thiols can either be modified with prefunctionalized electrophiles, or converted into electrophiles themselves for functionalization with selected nucleophiles in an independent step. Here we report a bioconjugation strategy that uses a vinyl thianthrenium salt to transform cysteine into a highly reactive electrophilic episulfonium intermediate in situ, to enable conjugation with a diverse set of bioorthogonal nucleophiles in a single step. The reactivity profile can connect several nucleophiles to biomolecules through a short and stable ethylene linker, ideal for introduction of infrared labels, post-translational modifications or NMR probes. In the absence of reactive exogenous nucleophiles, nucleophilic amino acids can react with the episulfonium intermediate for native peptide stapling and protein-protein ligation. Ready synthetic access to isotopologues of vinyl thianthrenium salts enables applications in quantitative proteomics. Such diverse applications demonstrate the utility of vinyl-thianthrenium-based bioconjugation as a fast, selective and broadly applicable tool for chemical biology.
Assuntos
Cisteína , Compostos de Sulfidrila , Cisteína/química , Compostos de Sulfidrila/química , Proteínas/química , Aminas/química , ProteômicaRESUMO
We report the first reductive vinylation of alkyl iodides. The reaction uses a vinyl thianthrenium salt, a palladium catalyst, and an alkyl zinc intermediate formed in situ to trap the Ln PdII (vinyl) complex formed after oxidative addition before it undergoes undesired homocoupling to form butadiene.
RESUMO
Herein we present the first method for the synthesis of bicyclo[1.1.1]pentyl (BCP) alkyl ethers from alcohols. The reaction uses BCP-thianthrenium reagents and is catalyzed by a dual copper/photoredox catalyst system. Unlike known alkylations of tertiary alcohols via carbocation intermediates, our Cu-mediated radical process circumvents the labile BCP carbocations. The approach demonstrates a broad tolerance for functional groups when applied to primary, secondary, and even tertiary alcohols. In addition, we highlight the utility of this method in late-stage functionalizations of both natural products and pharmaceuticals as well as in the rapid construction of BCP analogs of known pharmaceuticals that would otherwise be difficult to access.
RESUMO
Here, we show the conversion of unactivated alkenes into α-branched enones via regioselective chloroacylation with acyl chlorides. The method relies upon the initial in situ generation of chlorine radicals directly from the acyl chloride precursor under cooperative nickel/photoredox catalysis. Subsequent HCl elimination provides enones and α,ß-unsaturated esters that are not accessible via the conventional acylation approaches that provide the other, linear constitutional isomer.
RESUMO
The challenge of forming C-18F bonds is often a bottleneck in the development of new 18F-labeled tracer molecules for noninvasive functional imaging studies using positron emission tomography (PET). Nucleophilic aromatic substitution is the most widely employed reaction to functionalize aromatic substrates with the radioactive fluorine-18 but its scope is restricted to arenes containing electron-withdrawing substituents. Furthermore, many protic functional groups are incompatible with basic fluoride anions. Peptide substrates, which are highly desirable targets for PET molecular imaging, are particularly challenging to label with fluorine-18 because they are densely functionalized and sensitive to high temperatures and basic conditions. To expand the utility of nucleophilic aromatic substitution with fluorine-18, we describe two complementary procedures for the radiodeoxyfluorination of bench-stable and easy-to-access phenols that ensure rapid access to densely functionalized electron-rich and electron-poor 18F-aryl fluorides. The first procedure details the synthesis of an 18F-synthon and its subsequent ligation to the cysteine residue of Arg-Gly-Asp-Cys in 10.5 h from commercially available starting materials (189-min radiosynthesis). The second procedure describes the incorporation of commercially available CpRu(Fmoc-tyrosine)OTf into a fully protected peptide Lys-Met-Glu-(CpRu-Tyr)-Leu via solid-phase peptide synthesis and subsequent ruthenium-mediated uronium deoxyfluorination with fluorine-18 followed by deprotection, accomplished within 7 d (116-min radiosynthesis). Both radiolabeling methods are highly chemoselective and have conveniently been automated using commercially available radiosynthesis equipment so that the procedures described can be employed for the synthesis of peptide-based PET probes for in vivo imaging studies according to as low as reasonably achievable (ALARA) principles.
Assuntos
Fenóis , Compostos Radiofarmacêuticos , Radioisótopos de Flúor/química , Peptídeos/química , Tomografia por Emissão de Pósitrons , FluoretosRESUMO
In recent years, the creative use of polymers has been expanded as the range of achievable material properties and options for manufacturing and post-processing continually grows. The main goal of this research was to design and develop a fully-functioning material extrusion additive manufacturing device with the capability to produce functionally graded high-temperature thermoplastic PEEK (polyether ether ketone) materials through the manipulation of microstructure during manufacturing. Five different strategies to control the chamber temperature and crystallinity were investigated, and concepts of thermal control were introduced to govern the crystallisation and cooling mechanics during the extrusion process. The interaction of individually deposited beads of material during the printing process was investigated using scanning electron microscopy to observe and quantify the porosity levels and interlayer bonding strength, which affect the quality of the final part. Functional testing of the printed parts was carried out to identify crystallinity, boundary layer adhesion, and mechanical behaviour. Furnace cooling and annealing were found to be the most effective methods, resulting in the highest crystallinity of the part. Finally, a functionally graded material cylindrical part was printed successfully, incorporating both low and high crystalline regions.
RESUMO
Direct C-H fluorination is an efficient strategy to construct aromatic C-F bonds, but the cleavage of specific C-H bonds in the presence of other functional groups and the high barrier of C-F bond formation make the transformation challenging. Progress for the electrophilic fluorination of arenes has been reported, but a similar transformation for electron-deficient azaarenes has remained elusive due to the high energy of the corresponding Wheland intermediates. Nucleophilic fluorination of electron-deficient azaarenes is difficult owing to the identity of the Meisenheimer intermediate after fluoride attack, from which fluoride elimination to regenerate the substrate is favored over hydride elimination to form the product. Herein, we report a new concept for C-H nucleophilic fluorination without the formation of azaarene Meisenheimer intermediates through a chain process with an asynchronous concerted F--e--H+ transfer. The concerted nucleophilic aromatic substitution strategy allows for the first successful nucleophilic oxidative fluorination of quinolines.
RESUMO
Functionally Graded Materials represent the next generation of engineering design for metal and plastic components. In this research, a specifically modified and optimised 3D printer was used to manufacture functionally graded polyether ether ketone components. This paper details the design and manufacturing methodologies used in the development of a polyether ether ketone printer capable of producing functionally graded materials through the manipulation of microstructure. The interaction of individually deposited beads of material during the printing process was investigated using scanning electron microscopy, to observe and quantify the porosity levels and interlayer bonding strength, which affects the quality of the final parts. Specimens were produced under varying process conditions and tested to characterise the influence of the process conditions on the resulting material properties. The specimens printed at high enclosure temperatures exhibited greater strength than parts printed without the active addition of heat, due to improved bond formation between individual layers of the print and a large degree of crystallinity through maintenance at these elevated temperatures.
RESUMO
The arylethylamine pharmacophore is conserved across a range of biologically active natural products and pharmaceuticals, particularly in molecules that act on the central nervous system. Herein, we present a photoinduced copper-catalyzed azidoarylation of alkenes at a late stage with arylthianthrenium salts, allowing access to highly functionalized acyclic (hetero)arylethylamine scaffolds that are otherwise difficult to access. A mechanistic study is consistent with a rac-BINAP-CuI-azide (2) as the photoactive catalytic species. We show the utility of the new method by the expedient synthesis of racemic melphalan in four steps through C-H functionalization.
RESUMO
Herein, a regioselective, late-stage two-step arene halogenation method is reported. We propose how unusual Ni(I)/(III) catalysis is enabled by a combination of aryl thianthrenium and Ni redox properties that is hitherto unachieved with other (pseudo)halides. The catalyst is accessed in situ from inexpensive NiCl2·6(H2O) and zinc without the need of supporting ligands.
RESUMO
Herein, we report a photoinduced sulfoximine-to-copper charge-transfer-enabled generation of sulfoximinyl radicals directly from NH-sulfoximines for C-H sulfoximination of arenes via radical addition. Through copper-LMCT, N-arylation of NH-sulfoximines was achieved for the first time using arenes of different electronic structures as the aryl donors.
RESUMO
Sulfoximines are synthetically important scaffolds and serve important roles in drug discovery. Currently, there is no solution to decarboxylative sulfoximination of benzoic acids; although thoroughly investigated, limited substrate scope and harsh reaction conditions still hold back traditional thermal aromatic decarboxylative functionalization. Herein, we realize the first decarboxylative sulfoximination of benzoic acids via photo-induced ligand to copper charge transfer (copper-LMCT)-enabled decarboxylative carbometalation. The transformation proceeds under mild reaction conditions, has a broad substrate scope, and can be applied to late-stage functionalization of complex small molecules.
RESUMO
Herein, we report a photocatalyzed Meerwein-type bromoarylation of alkenes with stable arylthianthrenium salts, formed by site-selective C-H thianthrenation. This protocol can be applied to late-stage functionalization of a variety of biomolecules that are difficult to access by other aryl coupling reagents. Halogen introduction allows for a variety of follow-up transformations, affording numerous biologically active skeletons.
Assuntos
Alcenos , Sais , CatáliseRESUMO
Here we report an α-thianthrenium carbonyl species, as the equivalent of an α-carbonyl carbocation, which is generated by the radical conjugate addition of a trifluoromethyl thianthrenium salt to Michael acceptors. The reactivity allows for the synthesis of Cα -tetrasubstituted α- and ß-amino acid analogues via a Ritter reaction by addition of acetonitrile. Addition of hydroxide, methoxide, and even fluoride can afford α-heteroatom substituted α-phenylpropanoates.