Mapping the effects of ozone pollution and mixing on floral odour plumes and their impact on plant-pollinator interactions.

The critical ecological process of animal-mediated pollination is commonly facilitated by odour cues. These odours consist of volatile organic compounds (VOCs), often with short chemical lifetimes, which form the strong concentration gradients necessary for pollinating insects to locate a flower. Atmospheric oxidants, including ozone pollution, may react with and chemically alter these VOCs, impairing the ability of pollinators to locate a flower, and therefore the pollen and nectar on which they feed. However, there is limited mechanistic empirical evidence to explain these processes within an odour plume at temporal and spatial scales relevant to insect navigation and olfaction. We investigated the impact of ozone pollution and turbulent mixing on the fate of four model floral VOCs within odour plumes using a series of controlled experiments in a large wind tunnel. Average rates of chemical degradation of α-terpinene, ß-caryophyllene and 6-methyl-5-hepten-2-one were slightly faster than predicted by literature rate constants, but mostly within uncertainty bounds. Mixing reduced reaction rates by 8-10% in the first 2 m following release. Reaction rates also varied across the plumes, being fastest at plume edges where VOCs and ozone mixed most efficiently and slowest at plume centres. Honeybees were trained to learn a four VOC blend equivalent to the plume released at the wind tunnel source. When subsequently presented with an odour blend representative of that observed 6 m from the source at the centre of the plume, 52% of honeybees recognised the odour, decreasing to 38% at 12 m. When presented with the more degraded blend from the plume edge, recognition decreased to 32% and 10% at 6 and 12 m respectively. Our findings highlight a mechanism by which anthropogenic pollutants can disrupt the VOC cues used in plant-pollinator interactions, which likely impacts on other critical odour-mediated behaviours such as mate attraction.

Variability of physical meteorology in urban areas at different scales: implications for air quality.

Air quality in cities is influenced not only by emissions and chemical transformations but also by the physical state of the atmosphere which varies both temporally and spatially. Increasingly, tall buildings (TB) are common features of the urban landscape, yet their impact on urban air flow and dispersion is not well understood, and their effects are not appropriately captured in parameterisation schemes. Here, hardware models of areas within two global mega-cities (London and Beijing) are used to analyse the impact of TB on flow and transport in isolated and cluster settings. Results show that TB generate strong updrafts and downdrafts that affect street-level flow fields. Velocity differences do not decay monotonically with distance from the TB, especially in the near-wake region where the flow is characterised by recirculating winds and jets. Lateral distance from an isolated TB centreline is crucial, and flow is still strongly impacted at longitudinal distances of several TB heights. Evaluation of a wake-flow scheme (ADMS-Build) in the isolated TB case indicates important characteristics are not captured. There is better agreement for a slender, shorter TB than a taller non-cuboidal TB. Better prediction of flow occurs horizontally further away and vertically further from the surface. TB clusters modify the shape of pollutant plumes. Strong updrafts generated by the overlapping wakes of TB clusters lift pollutants out of the canopy, causing a much deeper tracer plume in the lee of the cluster, and an elevated plume centreline with maximum concentrations around the TB mean height. Enhanced vertical spread of the pollutants in the near-wake of the cluster results in overall lower maximum concentrations, but higher concentrations above the mean TB height. These results have important implications for interpreting observations in areas with TB. Using real world ceilometer observations in two mega-cities (Beijing and Paris), we assess the diurnal seasonal variability of the urban boundary layer and evaluate a mixed layer height (MLH) empirical model with parameters derived from a third mega-city (London). The MLH model works well in central Beijing but less well in suburban Paris. The variability of the physical meteorology across different vertical scales discussed in this paper provides additional context for interpreting air quality observations.

A Comparison of a Direct Electron Detector and a High-Speed Video Camera for a Scanning Precession Electron Diffraction Phase and Orientation Mapping.

A scanning precession electron diffraction system has been integrated with a direct electron detector to allow the collection of improved quality diffraction patterns. This has been used on a two-phase α­ß titanium alloy (Timetal® 575) for phase and orientation mapping using an existing pattern-matching algorithm and has been compared to the commonly used detector system, which consisted of a high-speed video-camera imaging the small phosphor focusing screen. Noise is appreciably lower with the direct electron detector, and this is especially noticeable further from the diffraction pattern center where the real electron scattering is reduced and both diffraction spots and inelastic scattering between spots are weaker. The results for orientation mapping are a significant improvement in phase and orientation indexing reliability, especially of fine nanoscale laths of α-Ti, where the weak diffracted signal is rather lost in the noise for the optically coupled camera. This was done at a dose of ~19 e−/Å2, and there is clearly a prospect for reducing the current further while still producing indexable patterns. This opens the way for precession diffraction phase and orientation mapping of radiation-sensitive crystalline materials.

Mean and turbulent mass flux measurements in an idealised street network.

Pollutant mass fluxes are rarely measured in the laboratory, especially their turbulent component. They play a major role in the dispersion of gases in urban areas and modern mathematical models often attempt some sort of parametrisation. An experimental technique to measure mean and turbulent fluxes in an idealised urban array was developed and applied to improve our understanding of how the fluxes are distributed in a dense street canyon network. As expected, horizontal advective scalar fluxes were found to be dominant compared with the turbulent components. This is an important result because it reduces the complexity in developing parametrisations for street network models. On the other hand, vertical mean and turbulent fluxes appear to be approximately of the same order of magnitude. Building height variability does not appear to affect the exchange process significantly, while the presence of isolated taller buildings upwind of the area of interest does. One of the most interesting results, again, is the fact that even very simple and regular geometries lead to complex advective patterns at intersections: parametrisations derived from measurements in simpler geometries are unlikely to capture the full complexity of a real urban area.

How tall buildings affect turbulent air flows and dispersion of pollution within a neighbourhood.

The city of London, UK, has seen in recent years an increase in the number of high-rise/multi-storey buildings ("skyscrapers") with roof heights reaching 150 m and more, with the Shard being a prime example with a height of ∼310 m. This changing cityscape together with recent plans of local authorities of introducing Combined Heat and Power Plant (CHP) led to a detailed study in which CFD and wind tunnel studies were carried out to assess the effect of such high-rise buildings on the dispersion of air pollution in their vicinity. A new, open-source simulator, FLUIDITY, which incorporates the Large Eddy Simulation (LES) method, was implemented; the simulated results were subsequently validated against experimental measurements from the EnFlo wind tunnel. The novelty of the LES methodology within FLUIDITY is based on the combination of an adaptive, unstructured, mesh with an eddy-viscosity tensor (for the sub-grid scales) that is anisotropic. The simulated normalised mean concentrations results were compared to the corresponding wind tunnel measurements, showing for most detector locations good correlations, with differences ranging from 3% to 37%. The validation procedure was followed by the simulation of two further hypothetical scenarios, in which the heights of buildings surrounding the source building were increased. The results showed clearly how the high-rise buildings affected the surrounding air flows and dispersion patterns, with the generation of "dead-zones" and high-concentration "hotspots" in areas where these did not previously exist. The work clearly showed that complex CFD modelling can provide useful information to urban planners when changes to cityscapes are considered, so that design options can be tested against environmental quality criteria.

Scalar Fluxes Near a Tall Building in an Aligned Array of Rectangular Buildings.

Scalar dispersion from ground-level sources in arrays of buildings is investigated using wind-tunnel measurements and large-eddy simulation (LES). An array of uniform-height buildings of equal dimensions and an array with an additional single tall building (wind tunnel) or a periodically repeated tall building (LES) are considered. The buildings in the array are aligned and form long streets. The sensitivity of the dispersion pattern to small changes in wind direction is demonstrated. Vertical scalar fluxes are decomposed into the advective and turbulent parts and the influences of wind direction and of the presence of the tall building on the scalar flux components are evaluated. In the uniform-height array turbulent scalar fluxes are dominant, whereas the tall building produces an increase of the magnitude of advective scalar fluxes that yields the largest component. The presence of the tall building causes either an increase or a decrease to the total vertical scalar flux depending on the position of the source with respect to the tall building. The results of the simulations can be used to develop parametrizations for street-canyon dispersion models and enhance their capabilities in areas with tall buildings.

Practical aspects of the use of the X(2) holder for HRTEM-quality TEM sample preparation by FIB.

The X(2) holder enables the effective production of thin, electron transparent samples for high-resolution transmission electron microscopy (HRTEM). Improvements to the X(2) holder for high-quality transmission electron microscopy (TEM) sample preparation are presented in this paper. We discuss the influence of backscattered electrons (BSE) from the sample holder in determining the lamella thickness in situ and demonstrate that a significant improvement in thickness determination can be achieved by comparatively simple means using the relative BSE intensity. We show (using Monte Carlo simulations) that by taking into account the finite collection angle of the electron backscatter detector, an approximately 20% underestimation of the lamella thickness in a silicon sample can be avoided. However, a correct thickness determination for light-element lamellas still remains a problem with the backscatter method; we introduce a more accurate method using the energy dispersive X-ray spectroscopy (EDX) signal for in situ thickness determination. Finally, we demonstrate how to produce a thin lamella with a nearly damage-free surface using the X(2) holder in combination with sub-kV polishing in the Fischione Instruments׳ NanoMill(®) TEM specimen preparation system.

Dual diagnosis, as described by those who experience the disorder: using the Internet as a source of data.

The complexity of providing treatment for people with dual diagnosis is well recognized. For the purpose of this paper, the World Health Organization definition of dual diagnosis was used; that is, a person diagnosed with an alcohol or drug use problem in addition to mental illness. This research explored the personal narratives of those who experience dual diagnosis using the Internet as a data source. An important consideration in using the Internet as a data source was that Web forums can offer a sense of anonymity, allowing people to share very detailed and personal information, and providing a rich source of qualitative data. The results produced five emergent themes: spiralling out of control - again!, getting help and giving support, treating both the addiction and mental illness, having meaning and being active, and being honest with self and others. The results indicate that individuals who experience dual diagnosis are often left to navigate their personal treatment requirements across two diverse systems, and were generally not satisfied with the conflictual advice received across these two systems (i.e. alcohol and other drug and mental health services). This study has produced valuable insights related to consumer-perceived service barriers and enablers.

Mixed methods evaluation research for a mental health screening and referral clinical pathway.

RATIONALE: This study is an exemplar of mixed method evaluation research for development of a clinical pathway. AIM: To develop and evaluate an evidence-based, feasible mental health screening and referral clinical pathway for Department of Veterans' Affairs-funded community nursing care of war veterans and war widows in the Australian context. METHODS: Mixed methods were applied to formulate and clinically evaluate an appropriate pathway. The pathway was applied at urban and rural sites for the nursing care of 97 war veteran and war widow clients. Evaluative data were collected from clients, their informal carers, community nurses, and general practitioners. Chart auditing and pre-post measures were undertaken. Collaboration occurred with an interdisciplinary design team. RESULTS: The final modified six-page pathway includes use of validated screening tools (Kessler Psychological Distress Scale [K10]) and Alcohol Use Disorder Identification Test, appropriate referral information, directions for support and health-promoting education, and evidence-based guidelines. IMPLICATIONS FOR PRACTICE: The clinical pathway is a useful, tested, evidence-based guide for generalist community nurses to identify and suitably respond to common mental healthcare needs of war veterans and war widows. The pathway provides outcomes acceptable to clients and their carers, nurses and doctors. CONCLUSIONS: This study provides an evaluated clinical pathway for generalist community nurses to screen for mental health difficulties, make appropriate referrals as required and to support war veteran and war widow clients. However, the study also shows how research can be used to develop and evaluate practical, evidence-based clinical pathways.

Air flow and concentration fields at urban road intersections for improved understanding of personal exposure.

This paper reviews the state of knowledge on modelling air flow and concentration fields at road intersections. The first part covers the available literature from the past two decades on experimental (both field and wind tunnel) and modelling activities in order to provide insight into the physical basis of flow behaviour at a typical cross-street intersection. This is followed by a review of associated investigations of the impact of traffic-generated localised turbulence on the concentration fields due to emissions from vehicles. There is a discussion on the role of adequate characterisation of vehicle-induced turbulence in making predictions using hybrid models, combining the merits of conventional approaches with information obtained from more detailed modelling. This concludes that, despite advancements in computational techniques, there are crucial knowledge gaps affecting the parameterisations used in current models for individual exposure. This is specifically relevant to the growing impetus on walking and cycling activities on urban roads in the context of current drives for sustainable transport and healthy living. Due to inherently longer travel times involved during such trips, compared to automotive transport, pedestrians and cyclists are subjected to higher levels of exposure to emissions. Current modelling tools seem to under-predict this exposure because of limitations in their design and in the empirical parameters employed.

An overview of experimental results and dispersion modelling of nanoparticles in the wake of moving vehicles.

Understanding the transformation of nanoparticles emitted from vehicles is essential for developing appropriate methods for treating fine scale particle dynamics in dispersion models. This article provides an overview of significant research work relevant to modelling the dispersion of pollutants, especially nanoparticles, in the wake of vehicles. Literature on vehicle wakes and nanoparticle dispersion is reviewed, taking into account field measurements, wind tunnel experiments and mathematical approaches. Field measurements and modelling studies highlighted the very short time scales associated with nanoparticle transformations in the first stages after the emission. These transformations strongly interact with the flow and turbulence fields immediately behind the vehicle, hence the need of characterising in detail the mixing processes in the vehicle wake. Very few studies have analysed this interaction and more research is needed to build a basis for model development. A possible approach is proposed and areas of further investigation identified.

An evaluation of a mental health screening and referral pathway for community nursing care: nurses' and general practitioners' perspectives.

AIMS AND OBJECTIVES: To evaluate a feasible, best practice mental health screening and referral clinical pathway for generalist community nursing care of war veterans and war widow(er)s in Australia. BACKGROUND: War veterans commonly experience mental health difficulties and do not always receive required treatment, as can also occur for war widow(er)s. Whenever opportunity arises, such as during community nursing care, it is vital to identify mental health problems in a health promotion framework. DESIGN: A clinical pathway was developed by literature review and consultation and then trialled and evaluated using mixed methods--quantitative and qualitative. METHODS: Community nurses who trialled the pathway completed an evaluation survey and attended focus groups. General practitioners responded to an evaluation survey. RESULTS: Most nurses found the pathway clear and easy to understand but not always easy to use. They emphasised the need to establish trust and rapport with clients prior to implementing the pathway. It was sometimes difficult to ensure effective referral to general practitioners for clients who screened positive for a mental health problem. When referral was accomplished, general practitioners reported adequate and useful information was provided. Some general practitioners also commented on the difficulty of achieving effective communication between general practitioners and nurses. CONCLUSIONS: Nurses and some general practitioners found the pathway useful for their practice. They offered several suggestions for improvement by simplifying the trialled pathway and accompanying guidelines and strategies to improve communication between nurses and general practitioners. This study adds understanding of how community nurses might productively screen for mental health difficulties. RELEVANCE TO CLINICAL PRACTICE: The trialled pathway, which was modified and refined following the study, is an evidence-based resource for community nurses in Australia and similar contexts to guide practise and maximise holistic care for war veterans and war widow(er)s and possibly other client groups.

Comparison of the behaviour of manufactured and other airborne nanoparticles and the consequences for prioritising research and regulation activities.

Currently, there are no air quality regulations in force in any part of the world to control number concentrations of airborne atmospheric nanoparticles (ANPs). This is partly due to a lack of reliable information on measurement methods, dispersion characteristics, modelling, health and other environmental impacts. Because of the special characteristics of manufactured (also termed engineered or synthesised) nanomaterials or nanoparticles (MNPs), a substantial increase is forecast for their manufacture and use, despite understanding of safe design and use, and health and environmental implications being in its early stage. This article discusses a number of underlining technical issues by comparing the properties and behaviour of MNPs with anthropogenically produced ANPs. Such a comparison is essential for the judicious treatment of the MNPs in any potential air quality regulatory framework for ANPs.

Evaluation of methodologies for exposure assessment to atmospheric pollutants from a landfill site.

Epidemiological studies around landfill sites are limited by several factors, particularly a lack of accurate exposure assessment. Traditionally, exposure estimates are based on distance between place of residence and the landfill site. However, this measure of exposure ignores the effects that environmental factors may have upon exposure. A previous epidemiological study at a landfill site in the United Kingdom provided the basis for a case study to investigate exposure assessment methodologies that could support ongoing and future epidemiological work. Estimation of relative exposure to atmospheric pollutants near the site was refined using the Atmospheric Dispersion Modeling System (ADMS) 3.1. Annual average concentrations were calculated around the landfill site, which was modeled as an area source with a steady release rate over its entire active surface. Local meteorological and terrain data were used in the assessment. A geographical information system (GIS) was then used to link the results of the modeling to population and other data. Sensitivity studies were included to examine the variation of predicted exposure with several modeling assumptions and hence set other uncertainties in context. No simple relationship existed between the relative individual exposure measured by distance from the site and by dispersion modeling. A reassessment of exposure assessment in epidemiological studies around landfill sites was then undertaken with the refined estimates of exposure. This concluded that use of distance from the site as a proxy for exposure could lead to significant exposure misclassification in comparison with exposure assessment using atmospheric dispersion modeling and GIS. The study also indicated that assessment of peak exposure rates (i.e., extreme concentration levels) might be necessary in some epidemiological work. Optimum strategies for increasing the probability of observing effects in the more highly exposed population can be derived by combining the results of dispersion modeling with population data and, where feasible, knowledge of the toxicology of the substances of interest.

Long-term homelessness in men with a psychosis: Limitation of services.

A proportion of persistently homeless men with psychosis are unable to function in the community, despite intensive outreach. The present study aimed to (i) develop a method to measure the number of homeless clients with a psychosis who are unable to maintain basic levels of function, despite the application of intensive community treatment; and (ii) determine if the proportion of these men had increased in an Australian inner urban setting over a 5-year period. Criteria were developed and validated to define this group. A review of records of clients engaged in homeless settings was conducted in order to compare the proportion of men with these features in 2000 and 2005. In 2005, 23% met the criterion of long-term homelessness with poor function, despite intensive outreach, as compared with 17% in 2000 (P = 0.62). The 2005 cohort was more likely to have attempted intensive community psychiatric treatment (P = 0.04). We conclude that a proportion of homeless men with a psychosis in Australia do not achieve basic function, despite access to intensive outreach. The proportion of these men did not change between 2000 and 2005. These men require additional specialized services, including access to long-term supported housing.