Solution-Blown Poly(hydroxybutyrate) and ε-Poly-l-lysine Submicro- and Microfiber-Based Sustainable Nonwovens with Antimicrobial Activity for Single-Use Applications.

Antimicrobial nonwovens for single use applications (e.g., diapers, sanitary napkins, medical gauze, etc.) are of utmost importance as the first line of defense against bacterial infections. However, the utilization of petrochemical nondegradable polymers in such nonwovens creates sustainability-related issues. Here, sustainable poly(hydroxybutyrate) (PHB) and ε-poly-l-lysine (ε-PLL) submicro- and microfiber-based antimicrobial nonwovens produced by a novel industrially scalable process, solution blowing, have been proposed. In such nonwovens, ε-PLL acts as an active material. In particular, it was found that most of ε-PLL is released within the first hour of deployment, as is desirable for the applications of interest. The submicro- and microfiber mat was tested against C. albicans and E. coli, and it was found that ε-PLL-releasing microfibers result in a significant reduction of bacterial colonies. It was also found that ε-PLL-releasing antimicrobial submicro- and microfiber nonwovens are safe for human cells in fibroblast culture. Mechanical characterization of these nonwovens revealed that, even though they are felt as soft and malleable, they possess sufficient strength, which is desirable in the end-user applications.

Dynamic Study of Liquid Drop Impact on Supercooled Cerium Dioxide: Anti-Icing Behavior.

This work deals with the anti-icing behavior at subfreezing temperatures of CeO2/polyurethane nanocomposite coatings with and without a stearic acid treatment on aluminum alloy substrates. The samples ranged from superhydrophilic to superhydrophobic depending on surface morphology and surface functionalization. X-ray photoelectron spectroscopy was used to determine the surface composition. The anti-icing behavior was studied both by importing fog into a chamber with controlled atmosphere at subzero temperatures and by conducting experiments with drop impact velocities of 1.98, 2.8, 3.83, and 4.95 m/s. It was found that the ice-phobicity of the ceramic/polymer nanocomposite coating was dependent on the surface roughness and surface energy. Water drops were observed to completely rebound from the surface at subfreezing temperatures from superhydrophobic surfaces with small contact angle hysteresis regardless of the impact velocity, thus revealing the anti-icing capability of such surfaces.