Functionality screening to help design effective materials for radioiodine abatement.

This paper is part of a growing body of research work looking at the synthesis of an optimal adsorbent for the capture and containment of aqueous radioiodine from nuclear fuel reprocessing waste. 32 metalated commercial ion exchange resins were subjected to a two-tier screening assessment for their capabilities in the uptake of iodide from aqueous solutions. The first stage determined that there was appreciable iodide capacity across the adsorbent range (12-220 mg·g-1). Candidates with loading capacities above 40 mg·g-1 were progressed to the second stage of testing, which was a fractional factorial experimental approach. The different adsorbents were treated as discrete variables and concentrations of iodide, co-contaminants and protons (pH) as continuous variables. This gave rise to a range of extreme conditions, which were representative of the industrial challenges of radioiodine abatement. Results were fitted to linear regression models, both for the whole dataset (R 2 = 59%) and for individual materials (R 2 = 18-82%). The overall model determined that iodide concentration, nitrate concentration, pH and interactions between these factors had significant influences on the uptake. From these results, the top six materials were selected for project progression, with others discounted due to either poor uptake or noticeable iodide salt precipitation behaviour. These candidates exhibited reasonable iodide uptake in most experimental conditions (average of >20 mg·g-1 hydrated mass), comparing favourably with literature values for metallated adsorbents. Ag-loaded Purolite S914 (thiourea functionality) was the overall best-performing material, although some salt precipitation was observed in basic conditions. Matrix effects not withstanding it is recommended that metalated thiourea, bispicolylamine, and aminomethylphosphonic acid functionalized silicas warrant further exploration.

Adsorption studies of a multi-metal system within acetate media, with a view to sustainable phosphate recovery from sewage sludge.

Phosphate shortages and the ensuing pressures on food security have led to an interest in processed sewage sludge as a substitute for commercial fertilisers. The presence of heavy metals in this nutrient source causes concerns around environmental release and pollution. This work builds towards a resin-in-pulp sludge detoxification process. It showcases the kinetic and thermodynamic adsorption capabilities of the ion-exchange resins C107E (carboxylic acid functionality), MTS9301 (iminodiacetic acid) and TP214 (thiourea), with respect to Cu(II), Fe(II), Pb(II) and Zn(II), within a simulated sewage sludge weak acid (acetate) leachate. The isotherms produced in this complex system were quite different to those generated when single metals were investigated in isolation, with desorption of lower affinity species clearly observed at higher equilibrium concentration values. Mixed-metal isotherm data were fitted to common two-parameter isotherm models and also a novel modified Langmuir model, which better accounted for the effects of desorption and competition. Kinetic data were also fit to common two-parameter models; results suggesting the system was likely film diffusion-controlled and followed pseudo-2nd-order kinetics. C107E displayed rapid adsorption of lead (t1/2 = 26 ± 3min), and significant uptake of all metals. MTS9301 showed high affinity for copper ions, with concurrent desorption of all the other metals, and also displayed the fastest kinetics (t1/2 = 14.1 ± 0.9, 130 ± 20, 25 ± 5 and 49 ± 6 min for copper, iron(II), lead and zinc, respectively). C107E and MTS9301 showed far slower adsorption for iron(II) than the other three metals, which invited the possibility of kinetic separations. TP214 had reasonable effectiveness in removal of copper, but poor affinity for all other metals. The greatest difficulty in modelling the multi-metal system was the two-stage trends observed in equilibrium experiments, as metal-proton exchanges become metal-metal exchanges. While not having the highest capacity, MTS9301 was recommended as the most appropriate resin for rapid and efficient removal of Cu, Pb and Zn from the acetate medium.

Characterisation of aluminium black dross before and after stepwise salt-phase dissolution in non-aqueous solvents.

Aqueous leaching to recover salts from black dross is accompanied by hazardous gas generation. The gas-generating phases vary significantly across differently sourced black dross. The challenge for the industry is how to accurately qualify and quantify the problematic components of black dross, especially minor reactive phases. This paper employed XRF, EDX, XRD, Raman and FTIR to analyse two industrial black dross samples from various sources. A novel pre-treatment method before characterisation was devised using water-free glycerol and anhydrous ethanol to remove the major salt components, without reacting the gas-generating phases. The results show that around 80 % of the salts existent in the black dross had been removed successfully through pre-treatment. This method facilitated the determination of minor reactive phases characterised by XRD, XRF and EDX, and had little effect on the characterisation by Raman and FTIR spectroscopy. The ammonia-generating nitride phase was detected by XRD, Raman and FTIR. The FTIR, moreover, allowed the successful identification of carbide. Best practice guidelines for the industrial analysis of black dross has been proposed. The guidelines would provide industry with evidence to include or adjust gas treatment methods and operational parameters when dealing with compositional variability in industrially-sourced black dross.

Water-Gated Transistor Using Ion Exchange Resin for Potentiometric Fluoride Sensing.

We introduce fluoride-selective anion exchange resin sorbents as sensitisers into membranes for water-gated field effect transistors (WGTFTs). Sorbents were prepared via metal (La or Al)-loading of a commercial macroporous aminophosphonic acid resin, PurometTM MTS9501, and were filled into a plasticised poly(vinyl chloride) (PVC) phase transfer membrane. We found a potentiometric response (membrane potential leading to WGTFT threshold shift) to fluoride following a Langmuir-Freundlich (LF) adsorption isotherm with saturated membrane potential up to ~480 mV, extremely low characteristic concentration c1/2 = 1/K, and picomolar limit of detection (LoD), even though ion exchange did not build up charge on the resin. La-loading gave a superior response compared to Al-loading. Membrane potential characteristics were distinctly different from charge accumulating sensitisers (e.g., organic macrocycles) but similar to the Cs+ (cation) selective ion-exchanging zeolite mineral 'mordenite'. We propose a mechanism for the observed threshold shift and investigate interference from co-solutes. Strong interference from carbonate was brought under control by 'diluting' metal loading in the resin. This work sets a template for future studies using an entirely new 'family' of sensitisers in applications where very low limit of detection is essential such as for ions of arsenic, mercury, copper, palladium, and gold.

Selective Environmental Remediation of Strontium and Cesium Using Sulfonated Hyper-Cross-Linked Polymers (SHCPs).

Sulfonated hyper-cross-linked polymers based on 4,4'-bis(chloromethyl)-1,1'-biphenyl (BCMBP) were synthesized via metal-free (SHCP-1) and conventional Lewis acid-catalyzed (SHCP-2) Friedel-Crafts alkylation routes. The sulfonated polymers possessed BET surface areas in excess of 500 m2·g-1. SHCP-1 was investigated for its ability to extract Sr and Cs ions from aqueous solutions via the ion-exchange reaction of the sulfonic acid moiety. Equilibrium uptake data could be accurately modeled by the Dubinin-Radushkevich isotherm, with maximum calculated loading values of 95.6 ± 2.8 mg·g-1 (Sr) and 273 ± 37 mg·g-1 (Cs). Uptake of both target ions was rapid, with pseudo second-order rate constants calculated as 7.71 ± 1.1 (×10-2) for Sr and 0.113 ± 0.014 for Cs. Furthermore, the polymer was found to be highly selective toward the target ions over large excesses of naturally occurring competing metal ions Na, K, Mg, and Ca. We conclude that hyper-cross-linked polymers may offer intrinsic advantages over other adsorbents for the remediation of aqueous Sr and Cs contamination.

Highly efficient fluoride extraction from simulant leachate of spent potlining via La-loaded chelating resin. An equilibrium study.

Spent potlining (SPL) hazardous waste is a potentially valuable source of fluoride, which may be recovered through chemical leaching and adsorption with a selective sorbent. For this purpose, the commercially available chelating resin Purolite® S950+ was loaded with lanthanum ions, to create a novel ligand-exchange sorbent. The equilibrium fluoride uptake behaviour of the resin was thoroughly investigated, using NaF solution and a simulant leachate of SPL waste. The resin exhibited a large maximum defluoridation capacity of 187 ± 15 mg g-1 from NaF solution and 126 ± 10 mg g-1 from the leachate, with solution pH being strongly influential to uptake performance. Isotherm and spectral data indicated that both chemisorption and unexpected physisorption processes were involved in the fluoride extraction and suggested that the major uptake mechanism differed in each matrix. The resin demonstrates significant potential in the recovery of fluoride from aqueous waste-streams.

Developing cellulosic waste products as platform chemicals: protecting group chemistry of α-glucoisosaccharinic acid.

Alpha and beta-glucoisosaccharinic acids ((2S,4S)-2,4,5-trihydroxy-2-(hydroxymethyl)pentanoic acid and (2R,4S)-2,4,5-trihydroxy-2-(hydroxymethyl)pentanoic acid) which are produced when cellulosic materials are treated with aqueous alkali are potentially valuable platform chemicals. Their highly functionalised carbon skeleton, with fixed chirality at C-2 and C-4, makes them ideal starting materials for use in synthesis. In order to assess the potential of these saccharinic acids as platform chemicals we have explored the protecting group chemistry of the lactone form of alpha-glucoisosaccharinic acid (α-GISAL). We report here the use of single and multiple step reaction pathways leading to the regioselective protection of the three different hydroxyl groups of α-GISAL. We report strategies for protecting the three different hydroxyl groups individually or in pairs. We also report the synthesis of a range of tri-O-protected α-GISAL derivatives where a number of the products contain orthogonal protecting groups.